标题
Grinding with minimum quantity lubrication: a comparative assessment
作者
关键词
-
出版物
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume 128, Issue 3-4, Pages 955-1014
出版商
Springer Science and Business Media LLC
发表日期
2023-07-25
DOI
10.1007/s00170-023-11962-5
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Nanofluids application in machining: a comprehensive review
- (2023) Xiaoming Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of nano-minimum quantity lubrication with MoS2 and CuO nanoparticles on cutting forces and surface roughness during grinding of AISI D2 steel
- (2023) Aref Azami et al. Journal of Manufacturing Processes
- Nanofluids, micro-lubrications and machining process optimisations − a review
- (2023) Rahul R. Chakule et al. Manufacturing Review
- Minimum quantity lubrication machining nickel base alloy: a comprehensive review
- (2023) Shu Zhou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Prediction model of volume average diameter and analysis of atomization characteristics in electrostatic atomization minimum quantity lubrication
- (2023) Dongzhou Jia et al. Friction
- Effects of minimum quantity lubrication (MQL) on grinding processes using eco-friendly nanofluids: a review
- (2023) Hamed Adibi et al. Advances in Materials and Processing Technologies
- Mechanism and enhanced grindability of cryogenic air combined with biolubricant grinding titanium alloy
- (2023) Mingzheng Liu et al. Tribology International
- Enhanced grindability and mechanism in the magnetic traction nanolubricant grinding of Ti-6Al-4 V
- (2023) Xin Cui et al. Tribology International
- Residual stress of grinding cemented carbide using MoS2 nano-lubricant
- (2022) Zechen Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Recent progress on the application of nanofluids and hybrid nanofluids in machining: a comprehensive review
- (2022) Maisarah Kursus et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Ductile-brittle transition mechanisms in micro-grinding of silicon nitride
- (2022) Serge Shamray et al. CERAMICS INTERNATIONAL
- Environmentally friendly grinding of C/SiCs using carbon nanofluid minimum quantity lubrication technology
- (2022) Shuoshuo Qu et al. Journal of Cleaner Production
- Effect of intermittent cutting behavior on the ultrasonic vibration-assisted grinding performance of Inconel718 nickel-based superalloy
- (2022) Yang Cao et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Analysis of grinding mechanics and improved grinding force model based on randomized grain geometric characteristics
- (2022) Mingzheng LIU et al. Chinese Journal of Aeronautics
- Application of MQL with cooled air and wheel cleaning jet for greener grinding process
- (2022) Douglas Maiochi Daniel et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Heat transfer mechanisms of nano-cutting fluids: a comparative performance analysis model
- (2022) Hussien Hegab et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Minimization of Surface Roughness and Residual Stress in Grinding Operations of Inconel 718
- (2022) Mohsen Soori et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Analysis of grain tribology and improved grinding temperature model based on discrete heat source
- (2022) Mingzheng Liu et al. TRIBOLOGY INTERNATIONAL
- Advances in precision manufacturing towards eco-friendly grinding process by applying MQL with cold air compared with cooled wheel cleaning jet
- (2021) Douglas Lyra de Moraes et al. The International Journal of Advanced Manufacturing Technology
- Study on grinding of inconel 625 and 718 alloys with cutting fluid enriched with multilayer graphene platelets
- (2021) Rodrigo de Souza Ruzzi et al. WEAR
- Temperature of Grinding Carbide With Castor Oil-Based MoS2 Nanofluid Minimum Quantity Lubrication
- (2021) Menghua Sui et al. Journal of Thermal Science and Engineering Applications
- Investigation on the influence of dynamic characteristic on grinding residual stress
- (2021) Cong Sun et al. The International Journal of Advanced Manufacturing Technology
- Recent advances on high performance machining of aerospace materials and composites using vegetable oil-based Metal Working Fluids
- (2021) K.C. Wickramasinghe et al. JOURNAL OF CLEANER PRODUCTION
- On grinding force ratio, specific energy, G-ratio and residual stress in SQCL assisted grinding using aerosol of MWCNT nanofluid
- (2021) Manoj Kumar K et al. MACHINING SCIENCE AND TECHNOLOGY
- Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling
- (2021) Min Yang et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process
- (2021) Munish Kumar Gupta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tribological Study of Activated Carbon Nanoparticle in Nonedible Nanofluid for Machining Application
- (2021) Norfazillah Talib et al. Evergreen
- Creep feed grinding induced gradient microstructures in the superficial layer of turbine blade root of single crystal nickel-based superalloy
- (2021) Qing Miao et al. International Journal of Extreme Manufacturing
- Alumina abrasive wheel wear in ultrasonic vibration-assisted creep-feed grinding of Inconel 718 nickel-based superalloy
- (2021) Yang Cao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermal Analysis of 3J33 Grinding Under Minimum Quantity Lubrication Condition
- (2021) Zishan Ding et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Semiempirical heat flux model of hard-brittle bone material in ductile microgrinding
- (2021) Min Yang et al. Journal of Manufacturing Processes
- A review on hybrid nanofluid: current research and sustainable development for turning operation
- (2021) Anup A. Junankar et al. International Journal of Environment and Sustainable Development
- Surface morphology evaluation of multi-angle 2D ultrasonic vibration integrated with nanofluid minimum quantity lubrication grinding
- (2020) Teng Gao et al. Journal of Manufacturing Processes
- Grinding hardened steel using MQL associated with cleaning system and cBN wheel
- (2020) Rafael Liberatti Javaroni et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review on recent development of minimum quantity lubrication for sustainable machining
- (2020) N.N. Nor Hamran et al. JOURNAL OF CLEANER PRODUCTION
- Comprehensive study on nanofluid and ionanofluid for heat transfer enhancement: A review on current and future perspective
- (2020) Balaji Bakthavatchalam et al. JOURNAL OF MOLECULAR LIQUIDS
- Preparation, characterization, and tribological properties of silica-nanoparticle-reinforced B-N-co-doped reduced graphene oxide as a multifunctional additive for enhanced lubrication
- (2020) Sang Xiong et al. Friction
- Application of conventional and hybrid nanofluids in different machining processes: A critical review
- (2020) Mohammad Hemmat Esfe et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Electrical Conductivity and Wettability of Nanofluids Prepared by Nanocomposite of MWCNTs and Dialkyl Pentasulfide
- (2020) Yong Wang et al. Current Nanoscience
- Experimental study of the influence of graphene platelets on the performance of grinding of SAE 52100 steel
- (2020) Raphael Lima de Paiva et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Green Metalworking Fluids for sustainable machining applications: A review
- (2020) K.C Wickramasinghe et al. JOURNAL OF CLEANER PRODUCTION
- Sustainability-based performance evaluation of hybrid nanofluid assisted machining
- (2020) Aqib Mashood Khan et al. JOURNAL OF CLEANER PRODUCTION
- Application of a tailored eco-friendly nanofluid in pressurized internal-cooling grinding of Inconel 718
- (2020) Ruitao Peng et al. JOURNAL OF CLEANER PRODUCTION
- Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication
- (2020) Teng Gao et al. JOURNAL OF CLEANER PRODUCTION
- Effects of abrasive material and hardness of grinding wheel on rail grinding behaviors
- (2020) R.X. Wang et al. WEAR
- Energy conservation and environmental sustainability during grinding operation of Ti–6Al–4V alloys via eco-friendly oil/graphene nano additive and Minimum quantity lubrication
- (2020) Ahmed Mohamed Mahmoud Ibrahim et al. TRIBOLOGY INTERNATIONAL
- Development and performance of a novel ultrasonic vibration plate sonotrode for grinding
- (2020) Yang Cao et al. Journal of Manufacturing Processes
- Experimental investigations on the tribological and lubrication behaviour of minimum quantity lubrication technique in grinding of Inconel 718 alloy
- (2020) Roshan Lal Virdi et al. TRIBOLOGY INTERNATIONAL
- Oil mist concentration and machining characteristics of SiO2 water-based nano-lubricants in electrostatic minimum quantity lubrication-EMQL milling
- (2020) Tao Lv et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant
- (2020) Teng Gao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Nanofluids assisted environmental friendly lubricating strategies for the surface grinding of titanium alloy: Ti6Al4V-ELI
- (2019) Harpinder Singh et al. Journal of Manufacturing Processes
- Amorphous carbon films in-situ formed from PTFE transfer layer in solid lubricated cryogenic turbopump bearings
- (2019) Ming Hu et al. TRIBOLOGY TRANSACTIONS
- Investigation into the performance of eco-friendly graphite nanofluid as lubricant in MQL grinding
- (2019) Mirsadegh Seyedzavvar et al. MACHINING SCIENCE AND TECHNOLOGY
- Fuzzy Logic Method to Investigate Grinding of Alumina Ceramic using Minimum Quantity Lubrication
- (2019) Yusuf S. Dambatta et al. International Journal of Applied Ceramic Technology
- Contribution for minimization the usage of cutting fluids in CFRP grinding
- (2019) Rafael Lemes Rodriguez et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Research on grind-hardening layer and residual stresses based on variable grinding forces
- (2019) Xiangming Huang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics
- (2019) Min Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions
- (2019) Min Yang et al. CERAMICS INTERNATIONAL
- A review on cutting of industrial ceramic materials
- (2019) Rahul Rakshit et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Influence of multilayer graphene platelet concentration dispersed in semi-synthetic oil on the grinding performance of Inconel 718 alloy under various machining conditions
- (2019) D. De Oliveira et al. WEAR
- Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic
- (2019) Yusuf S. Dambatta et al. Journal of Manufacturing Processes
- Tribological properties under the grinding wheel and workpiece interface by using graphene nanofluid lubricant
- (2019) Xin Cui et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Specific Energy and G ratio of Grinding Cemented Carbide under Different Cooling and Lubrication Conditions
- (2019) Wentao Wu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Minimum quantity of lubrication (MQL) as an eco-friendly alternative to the cutting fluids in advanced ceramics grinding
- (2019) R. L. Javaroni et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Synergistic tribological performance of a water based lubricant using graphene oxide and alumina hybrid nanoparticles as additives
- (2019) Shuiquan Huang et al. TRIBOLOGY INTERNATIONAL
- A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
- (2019) Zafar Said et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Capillary penetration mechanism and machining characteristics of lubricant droplets in electrostatic minimum quantity lubrication (EMQL) grinding
- (2019) Xuefeng Xu et al. Journal of Manufacturing Processes
- Experimental investigations on surface grinding of silicon nitride subjected to mono and hybrid nanofluids
- (2019) Anil Kumar et al. CERAMICS INTERNATIONAL
- An investigation of carbon nanofluid minimum quantity lubrication for grinding unidirectional carbon fibre-reinforced ceramic matrix composites
- (2019) Shuoshuo Qu et al. JOURNAL OF CLEANER PRODUCTION
- Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing
- (2019) Binayak Sen et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Application of MQL technique using TiO2 nanoparticles compared to MQL simultaneous to the grinding wheel cleaning jet
- (2019) José Claudio Lopes et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental evaluation of an eco-friendly grinding process combining minimum quantity lubrication and graphene-enhanced plant-oil-based cutting fluid
- (2019) Ming Li et al. JOURNAL OF CLEANER PRODUCTION
- Machining characteristics and mechanism of GO/SiO2 nanoslurries in fixed abrasive lapping
- (2019) Shuiquan Huang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Exploration of graphene assisted vegetables oil based minimum quantity lubrication for surface grinding of TI-6AL-4V-ELI
- (2019) Harpinder Singh et al. TRIBOLOGY INTERNATIONAL
- Analysis of volume ratio of castor/soybean oil mixture on minimum quantity lubrication grinding performance and microstructure evaluation by fractal dimension
- (2018) Shuming Guo et al. INDUSTRIAL CROPS AND PRODUCTS
- Comparative study on the performance of the MQL nanolubricant and conventional flood lubrication techniques during grinding of Si3N4 ceramic
- (2018) Yusuf S. Dambatta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tribological and machining characteristics of a minimum quantity lubrication (MQL) technology using GO/SiO2 hybrid nanoparticle water-based lubricants as cutting fluids
- (2018) Tao Lv et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Temperature field model and experimental verification on cryogenic air nanofluid minimum quantity lubrication grinding
- (2018) Jianchao Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of minimum quantity lubrication with addition of water in the grinding of alumina
- (2018) José C. Lopes et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Thermal conductivity of hybrid nanofluids: A critical review
- (2018) Muhammad Usman Sajid et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Influence of water-based copper nanofluid on wheel loading and surface roughness during grinding of Inconel 738 superalloy
- (2018) Farzad Pashmforoush et al. JOURNAL OF CLEANER PRODUCTION
- Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air
- (2018) Jianchao Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Rheological behavior of CuO/EG:W (20:80 v/v) nanofluid from a thermal perspective
- (2018) Mohammad Hemmat Esfe et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- A comprehensive review of preparation, characterization, properties and stability of hybrid nanofluids
- (2018) D. Dhinesh Kumar et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Processing Characteristics of Vegetable Oil-based Nanofluid MQL for Grinding Different Workpiece Materials
- (2018) Yaogang Wang et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Effects of Machining and Oil Mist Parameters on Electrostatic Minimum Quantity Lubrication–EMQL Turning Process
- (2018) Shuiquan Huang et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Experimental evaluation of surface topographies of NMQL grinding ZrO2 ceramics combining multiangle ultrasonic vibration
- (2018) Dongzhou Jia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study of 3D parameters and residual stress in grinding of AISI 4340 steel hardened using different cutting fluids
- (2018) Leonardo Roberto da Silva et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Synthesized CuFe2O4/SiO2 nanocomposites added to water/EG: Evaluation of the thermophysical properties beside sensitivity analysis & EANN
- (2018) Arash Karimipour et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- An experimental investigation on the effects of minimum quantity nano lubricant application in grinding process of Tungsten carbide
- (2018) S.F. Hosseini et al. Journal of Manufacturing Processes
- Prediction of specific grinding forces and surface roughness in machining of AL6061-T6 alloy using ANFIS technique
- (2018) Yusuf S. Dambatta et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Application of minimum quantity lubrication techniques in machining process of titanium alloy for sustainability: a review
- (2018) Khaled Ali Osman et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multi-Objective Optimization for Grinding of AISI D2 Steel with Al2O3 Wheel under MQL
- (2018) Aqib Mashood Khan et al. Materials
- Fabrication of GNS/MoS2 composite with different morphology and its tribological performance as a lubricant additive
- (2018) Wei Song et al. APPLIED SURFACE SCIENCE
- Study on minimum quantity lubrication (MQL) in grinding of carbon fiber-reinforced SiC matrix composites (CMCs)
- (2017) H. Adibi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance improvement of eco-friendly MQL technique by using hybrid nanofluid and ultrasonic-assisted grinding
- (2017) F. Rabiei et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical and experimental research on the grinding temperature of minimum quantity lubrication cooling of different workpiece materials using vegetable oil-based nanofluids
- (2017) Benkai Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental evaluation of coolant-lubricant properties of nanofluids in ultrasonic assistant MQL grinding
- (2017) F. Rabiei et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications—a review
- (2017) Yusuf S. Dambatta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental investigation into lubrication properties and mechanism of vegetable-based CuO nanofluid in MQL grinding
- (2017) Mohammadreza Shabgard et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
- (2017) B. Boswell et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Thermo-physical property evaluation of diathermic oil based hybrid nanofluids for heat transfer applications
- (2017) Baojie Wei et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms
- (2017) Yanbin Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil
- (2017) Benkai Li et al. JOURNAL OF CLEANER PRODUCTION
- Application of eco-friendly nanofluids during grinding of Inconel 718 through small quantity lubrication
- (2017) Manoj Kumar Sinha et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy
- (2017) Shuming Guo et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation on tribological performance of the wheel/workpiece interface in minimum quantity lubrication grinding with different concentrations of Al 2 O 3 nanofluids
- (2017) Yaogang Wang et al. JOURNAL OF CLEANER PRODUCTION
- Process parameter optimization and experimental evaluation for nanofluid MQL in grinding Ti-6Al-4V based on grey relational analysis
- (2017) Guotao Liu et al. MATERIALS AND MANUFACTURING PROCESSES
- Lubricating property of MQL grinding of Al 2 O 3 /SiC mixed nanofluid with different particle sizes and microtopography analysis by cross-correlation
- (2017) Xianpeng Zhang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids
- (2017) Dongzhou Jia et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- State-of-art review on hybrid nanofluids
- (2017) J.A. Ranga Babu et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- A review on preparation methods, stability and applications of hybrid nanofluids
- (2017) Nor Azwadi Che Sidik et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Investigation of the effects of mixtures of WS 2 and ZnO solid lubricants on the sliding friction and wear of M50 steel against silicon nitride at elevated temperatures
- (2017) F.A. Essa et al. WEAR
- Hybrid lubricating/cooling strategies to reduce the tool wear in finishing turning of difficult-to-cut alloys
- (2017) S. Sartori et al. WEAR
- Nozzle design for combined use of MQL and cryogenic gas in machining
- (2017) Octavio Pereira et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Comparative evaluation of the lubricating properties of vegetable-oil-based nanofluids between frictional test and grinding experiment
- (2017) Yaogang Wang et al. Journal of Manufacturing Processes
- Analysis of TiO 2 nano-additive water-based lubricants in hot rolling of microalloyed steel
- (2017) Hui Wu et al. Journal of Manufacturing Processes
- Thermal conductivity and electrical properties of hybrid SiO2-graphene naphthenic mineral oil nanofluid as potential transformer oil
- (2017) Soo Hui Qing et al. Materials Research Express
- Thermal conductivity and viscosity of water based nanodiamond (ND) nanofluids: An experimental study
- (2016) L. Syam Sundar et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Performances of Al2O3/SiC hybrid nanofluids in minimum-quantity lubrication grinding
- (2016) Xianpeng Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy
- (2016) Benkai Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Review on grinding-induced residual stresses in metallic materials
- (2016) Wenfeng Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improvement of surface grinding process performance of CK45 soft steel by minimum quantity lubrication (MQL) technique using compressed cold air jet from vortex tube
- (2016) A. Saberi et al. JOURNAL OF CLEANER PRODUCTION
- Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review
- (2016) Anuj Kumar Sharma et al. JOURNAL OF CLEANER PRODUCTION
- Ultrasonic assisted grinding process with minimum quantity lubrication using oil-based nanofluids
- (2016) M.M. Molaie et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of cooling performance by friction coefficient and specific friction energy in nanofluid minimum quantity lubrication grinding with different types of vegetable oil
- (2016) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils
- (2016) Yaogang Wang et al. JOURNAL OF CLEANER PRODUCTION
- Some critical issues in cryo-grinding by a vitrified bonded alumina wheel using liquid nitrogen jet
- (2016) Prudvi P Reddy et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy
- (2016) Yanbin Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Machining comparison of aerospace materials considering minimum quantity cutting fluid: A clean and green approach
- (2016) Munish Kumar Gupta et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- A review on preparation, characterization, properties and applications of nanofluids
- (2016) Dhinesh Kumar Devendiran et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids
- (2016) Yaogang Wang et al. TRIBOLOGY INTERNATIONAL
- Roles of nanoparticles in oil lubrication
- (2016) Wei Dai et al. TRIBOLOGY INTERNATIONAL
- Thermodynamic analysis and performance assessment of an integrated heat pump system for district heating applications
- (2015) Reza Soltani et al. APPLIED THERMAL ENGINEERING
- Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding
- (2015) Dongkun Zhang et al. Chinese Journal of Aeronautics
- Residual stress modeling in minimum quantity lubrication grinding
- (2015) Yamin Shao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental research on the influence of the jet parameters of minimum quantity lubrication on the lubricating property of Ni-based alloy grinding
- (2015) Dongzhou Jia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding
- (2015) Yanbin Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Hardness control of grind-hardening and finishing grinding by means of area-based specific energy
- (2015) U. Alonso et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Performance evaluation of Ti–6Al–4V grinding using chip formation and coefficient of friction under the influence of nanofluids
- (2015) Dinesh Setti et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Performance improvement of minimum quantity lubrication (MQL) technique in surface grinding by modeling and optimization
- (2015) F. Rabiei et al. JOURNAL OF CLEANER PRODUCTION
- Sustainable machining of high temperature Nickel alloy – Inconel 718: part 2 – chip breakability and optimization
- (2015) Franci Pusavec et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
- (2015) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Experimental Investigation of Residual Stress in Minimum Quantity Lubrication Grinding of AISI 1018 Steel
- (2015) Yamin Shao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Numerical and experimental studies on grind-hardening cylindrical surface
- (2014) Liu Songyong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The tribological properties of nanofluid used in minimum quantity lubrication grinding
- (2014) Cong Mao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Synthesis of MWCNT nanofluid and evaluation of its potential besides soluble oil as micro cooling-lubrication medium in SQL grinding
- (2014) K. ManojKumar et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An experimental investigation into resonance dry grinding of hardened steel and nickel alloys with element of MQL
- (2014) Andre D. L. Batako et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Sustainable machining of high temperature Nickel alloy – Inconel 718: part 1 – predictive performance models
- (2014) Franci Pusavec et al. JOURNAL OF CLEANER PRODUCTION
- Preparation and Tribological Properties of Dual-Coated TiO2Nanoparticles as Water-Based Lubricant Additives
- (2014) Yue Gu et al. Journal of Nanomaterials
- Experimental verification of nanoparticle jet minimum quantity lubrication effectiveness in grinding
- (2014) Dongzhou Jia et al. JOURNAL OF NANOPARTICLE RESEARCH
- Various MoS2-, WS2- and C-Based Micro- and Nanoparticles in Boundary Lubrication
- (2014) J. Kogovšek et al. TRIBOLOGY LETTERS
- Analysis of Nanofluids as Cutting Fluid in Grinding EN-31 Steel
- (2014) V. Vasu et al. Nano-Micro Letters
- Influence of cryogenic cooling on surface grinding of stainless steel 316
- (2013) G. Manimaran et al. CRYOGENICS
- An investigation on surface grinding of hardened stainless steel S34700 and aluminum alloy AA6061 using minimum quantity of lubrication (MQL) technique
- (2013) Mohammadjafar Hadad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmentally friendly manufacturing: Behavior analysis of minimum quantity of lubricant - MQL in grinding process
- (2013) Leonardo R. Silva et al. JOURNAL OF CLEANER PRODUCTION
- Investigating the Minimum Quantity Lubrication in grinding of Al2O3 engineering ceramic
- (2013) Mohsen Emami et al. JOURNAL OF CLEANER PRODUCTION
- Minimum Quantity Lubricated Grinding of Inconel 751 Alloy
- (2013) A. S. S. Balan et al. MATERIALS AND MANUFACTURING PROCESSES
- Investigation on the Effect of Nanofluid Parameters on MQL Grinding
- (2013) Cong Mao et al. MATERIALS AND MANUFACTURING PROCESSES
- Evaluation of hexagonal boron nitride nano-sheets as a lubricant additive in water
- (2013) Dae-Hyun Cho et al. WEAR
- Evaluation of Minimum Quantity Lubrication Grinding with Nano-particles and Recent Related Patents
- (2013) Changhe Li et al. Recent Patents on Nanotechnology
- Investigating the effects of liquid atomization and delivery parameters of minimum quantity lubrication on the grinding process of Al2O3 engineering ceramics
- (2013) M. Emami et al. Journal of Manufacturing Processes
- The Effect of Oxidation on the Tribological Performance of Few Vegetable Oils
- (2013) Jagadeesh K. Mannekote et al. Journal of Materials Research and Technology-JMR&T
- Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding
- (2012) Parash Kalita et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- The influence of spraying parameters on grinding performance for nanofluid minimum quantity lubrication
- (2012) Cong Mao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of Computational Fluid Dynamics (CFD) for nanofluids
- (2012) A. Kamyar et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Improving minimum quantity lubrication in CBN grinding using compressed air wheel cleaning
- (2012) Danilo de Jesus Oliveira et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Nano-Cutting Fluid for Enhancement of Metal Cutting Performance
- (2012) S. Khandekar et al. MATERIALS AND MANUFACTURING PROCESSES
- IF-MoS2 based lubricants: Influence of size, shape and crystal structure
- (2012) Imène Lahouij et al. WEAR
- Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants
- (2012) Parash Kalita et al. Journal of Manufacturing Processes
- The tribology properties of alumina/silica composite nanoparticles as lubricant additives
- (2011) Da Jiao et al. APPLIED SURFACE SCIENCE
- Physicochemical Properties of Oil-Based Nanofluids Containing Hybrid Structures of Silver Nanoparticles Supported on Silica
- (2011) Subelia S. Botha et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Study on minimum quantity lubrication in micro-grinding
- (2011) Kuan-Ming Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- AFM investigation in grinding process with nanofluids using Taguchi analysis
- (2011) Sethuramalingam Prabhu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Temperatures in fine grinding with minimum quantity lubrication (MQL)
- (2011) M. N. Morgan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Temperature and energy partition in minimum quantity lubrication-MQL grinding process
- (2011) M.J. Hadad et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Minimum quantity lubrication in grinding: effects of abrasive and coolant–lubricant types
- (2011) Taghi Tawakoli et al. JOURNAL OF CLEANER PRODUCTION
- Review of Heat Conduction in Nanofluids
- (2011) Jing Fan et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Nano surface generation of grinding process using carbon nano tubes
- (2011) S. Prabhu et al. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES
- A study of plane surface grinding under minimum quantity lubrication (MQL) conditions
- (2010) L.M. Barczak et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of oil mist parameters on minimum quantity lubrication – MQL grinding process
- (2010) T. Tawakoli et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machining evaluation of a hybrid MQL-CO2 grinding technology
- (2010) J.A. Sanchez et al. JOURNAL OF CLEANER PRODUCTION
- A technology enabler for green machining: minimum quantity lubrication (MQL)
- (2010) Nourredine Boubekri et al. Journal of Manufacturing Technology Management
- An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication—MQL grinding
- (2009) T. Tawakoli et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An investigation of graphite nanoplatelets as lubricant in grinding
- (2009) Matthew Alberts et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A Comparative Study of Residual Stress Distribution Induced by Hard Machining Versus Grinding
- (2009) Youngsik Choi TRIBOLOGY LETTERS
- Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy
- (2008) M. H. Sadeghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing
- (2008) P.W. Marksberry et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Application of Nanofluids in Minimum Quantity Lubrication Grinding
- (2008) Bin Shen et al. TRIBOLOGY TRANSACTIONS
- Modeling the effects of cutting parameters in MQL-employed finish hard-milling process using D-optimal method
- (2007) Asif Iqbal et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now