A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
出版年份 2017 全文链接
标题
A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
作者
关键词
Flank wear, Minimum quantity lubrication, Sustainability, Effectiveness, Consumption, Financial penalties
出版物
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume 92, Issue 1-4, Pages 321-340
出版商
Springer Nature
发表日期
2017-02-23
DOI
10.1007/s00170-017-0142-3
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- A study on droplets sizes, their distribution and heat exchange for minimum quantity cooling lubrication (MQCL)
- (2016) Radoslaw W. Maruda et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Lubrication performance of MoS2 and SiO2 nanoparticles as lubricant additives in magnesium alloy-steel contacts
- (2016) Hongmei Xie et al. TRIBOLOGY INTERNATIONAL
- Experimental investigation on thermal conductivity of water based nickel ferrite nanofluids
- (2015) Amir Karimi et al. ADVANCED POWDER TECHNOLOGY
- Investigations on the thermal workpiece distortion in MQL deep hole drilling of an aluminium cast alloy
- (2015) D. Biermann et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Quantitative analysis of chip extraction in drilling of Ti 6 Al 4 V
- (2015) Ekkard Brinksmeier et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding
- (2015) Dongkun Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental study on thermal conductivity of ethylene glycol based nanofluids containing Al 2 O 3 nanoparticles
- (2015) Mohammad Hemmat Esfe et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Stability and enhanced thermal conductivity of ethylene glycol-based SiC nanofluids
- (2015) Xiaoke Li et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Numerical modeling and experimental measurement of MQL impingement over an insert in a milling tool with inner channels
- (2015) Arnaud Duchosal et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding
- (2015) Yanbin Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Evaluating the use of zinc oxide and titanium dioxide nanoparticles in a metalworking fluid from a toxicological perspective
- (2015) S. H. Seyedmahmoudi et al. JOURNAL OF NANOPARTICLE RESEARCH
- Machining of Titanium Alloy(Ti-6Al-4V)—Theory to Application
- (2015) Alokesh Pramanik et al. MACHINING SCIENCE AND TECHNOLOGY
- Study of tribological performance and mechanism of phosphonate ionic liquids for steel/aluminum contact
- (2015) Yunyan Han et al. TRIBOLOGY INTERNATIONAL
- Effect of CuO and Al 2 O 3 nanoparticle additives on the tribological behavior of fully formulated oils
- (2015) Laura Peña-Parás et al. WEAR
- Performance evaluation of coated carbide tool in machining of stainless steel (AISI 202) under minimum quantity lubrication (MQL)
- (2015) J. S. Dureja et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Modeling of drilling assisted by cryogenic cooling for higher efficiency
- (2014) Martin Dix et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A review of recent developments of friction modifiers for liquid lubricants (2007–present)
- (2014) Zhenglin Tang et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- A comparison of two minimum quantity lubrication delivery systems
- (2014) Sheri Kurgin et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- The tribological properties of nanofluid used in minimum quantity lubrication grinding
- (2014) Cong Mao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of lubricant condition and machining parameters while turning of AISI 4340
- (2014) Hamed Sohrabpoor et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of ionic liquids as lubricants in micro milling – process capability and sustainability
- (2014) Minh-Quan Pham et al. JOURNAL OF CLEANER PRODUCTION
- Environmental friendly cutting fluids and cooling techniques in machining: a review
- (2014) Sujan Debnath et al. JOURNAL OF CLEANER PRODUCTION
- The influence of cryogenic cooling on milling stability
- (2014) Xinda Huang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining
- (2014) Yusuf Kaynak et al. MACHINING SCIENCE AND TECHNOLOGY
- Improvement of Near-Dry Machining and Its Effect on Tool Wear in Turning of AISI 4142
- (2014) S. Amini et al. MATERIALS AND MANUFACTURING PROCESSES
- Tool Wear and Formation Mechanism of White Layer When Hard Milling H13 Steel under Different Cooling/Lubrication Conditions
- (2014) Song Zhang et al. Advances in Mechanical Engineering
- Influence of cryogenic cooling on surface grinding of stainless steel 316
- (2013) G. Manimaran et al. CRYOGENICS
- An investigation on surface grinding of hardened stainless steel S34700 and aluminum alloy AA6061 using minimum quantity of lubrication (MQL) technique
- (2013) Mohammadjafar Hadad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining
- (2013) Bizhan Rahmati et al. JOURNAL OF CLEANER PRODUCTION
- Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil
- (2013) Jagdeep Sharma et al. JOURNAL OF CLEANER PRODUCTION
- Rough turning Inconel 750 with supercritical CO2-based minimum quantity lubrication
- (2013) D.A. Stephenson et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- EFFECT OF ADDITIONAL FACTORS ON DIMENSIONAL ACCURACY AND SURFACE FINISH OF TURNED PARTS
- (2013) M. N. Islam MACHINING SCIENCE AND TECHNOLOGY
- Evaluation of ionic fluids as lubricants in manufacturing
- (2013) A. Libardi et al. Journal of Manufacturing Processes
- Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding
- (2012) Parash Kalita et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Thermal analysis of minimum quantity lubrication-MQL grinding process
- (2012) Mohammadjafar Hadad et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Viscosity and thermal conductivity measurements of water-based nanofluids containing titanium oxide nanoparticles
- (2012) Laura Fedele et al. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
- Performance of supercritical carbon dioxide sprays as coolants and lubricants in representative metalworking operations
- (2012) S.D. Supekar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants
- (2012) Parash Kalita et al. Journal of Manufacturing Processes
- Toxicology of nanoparticles
- (2011) Andreas Elsaesser et al. ADVANCED DRUG DELIVERY REVIEWS
- The tribology properties of alumina/silica composite nanoparticles as lubricant additives
- (2011) Da Jiao et al. APPLIED SURFACE SCIENCE
- Experimental investigations on cryogenic cooling by liquid nitrogen in the end milling of hardened steel
- (2011) S. Ravi et al. CRYOGENICS
- Implications of the reduction of cutting fluid in drilling AISI P20 steel with carbide tools
- (2011) Rodrigo P. Zeilmann et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental investigation of surface quality for minimum quantity oil–water lubrication grinding
- (2011) Cong Mao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Temperatures in fine grinding with minimum quantity lubrication (MQL)
- (2011) M. N. Morgan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Temperature and energy partition in minimum quantity lubrication-MQL grinding process
- (2011) M.J. Hadad et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Cutting performance of different coatings during minimum quantity lubrication drilling of aluminum silicon B319 cast alloy
- (2011) G. Fox-Rabinovich et al. SURFACE & COATINGS TECHNOLOGY
- Study of dry and minimum quantity lubrication drilling of novel austempered ductile iron (ADI) for automotive applications
- (2011) A. Meena et al. WEAR
- Experimental investigation on the thermal transport properties of ethylene glycol based nanofluids containing low volume concentration diamond nanoparticles
- (2010) Wei Yu et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- Impact of ionic liquids in environment and humans: An overview
- (2010) Raquel FM Frade et al. HUMAN & EXPERIMENTAL TOXICOLOGY
- A new technology on enhancing heat transfer during grinding of titanium alloy
- (2010) Qinglong An et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- A study of plane surface grinding under minimum quantity lubrication (MQL) conditions
- (2010) L.M. Barczak et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Comparison of different turbulence models in predicting the temperature separation in a Ranque–Hilsch vortex tube
- (2010) T. Dutta et al. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
- Experimental examination of the cooling performance of Ranque-Hilsch vortex tube on the cutting tool nose point of the turret lathe through infrared thermography method
- (2010) M. Selek et al. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
- Machining evaluation of a hybrid MQL-CO2 grinding technology
- (2010) J.A. Sanchez et al. JOURNAL OF CLEANER PRODUCTION
- Effects of cooling air temperature on cryogenic machining of Ti–6Al–4V alloy
- (2010) S.M. Yuan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Alkyl Imidazolium Ionic Liquids as Friction Reduction and Anti-Wear Additive in Polyurea Grease for Steel/Steel Contacts
- (2010) Meirong Cai et al. TRIBOLOGY LETTERS
- A technology enabler for green machining: minimum quantity lubrication (MQL)
- (2010) Nourredine Boubekri et al. Journal of Manufacturing Technology Management
- Tribological behaviour when face milling AISI 4140 steel with minimum quantity fluid application
- (2009) Wisley Sales et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Cooling techniques for improved productivity in turning
- (2009) Vishal S. Sharma et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Exergy analysis and performance of a counter flow Ranque–Hilsch vortex tube having various nozzle numbers at different inlet pressures of oxygen and air
- (2009) Volkan Kırmacı INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
- Tribological properties of diamond and SiO2 nanoparticles added in paraffin
- (2009) D.X. Peng et al. TRIBOLOGY INTERNATIONAL
- Ionic Liquids as Lubricants of Titanium–Steel Contact. Part 2: Friction, Wear and Surface Interactions at High Temperature
- (2009) A. E. Jiménez et al. TRIBOLOGY LETTERS
- Tribological behaviour of two imidazolium ionic liquids as lubricant additives for steel/steel contacts
- (2009) A. Hernández Battez et al. WEAR
- Modeling of the effects of length to diameter ratio and nozzle number on the performance of counterflow Ranque–Hilsch vortex tubes using artificial neural networks
- (2008) K. Dincer et al. APPLIED THERMAL ENGINEERING
- Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy
- (2008) M. H. Sadeghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool wear and tool life in end milling of 15–5 PH stainless steel under different cooling and lubrication conditions
- (2008) Aldo Braghini Junior et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study on orthogonal turning of titanium alloys with different coolant supply strategies
- (2008) Z. G. Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro-liter lubrication machining of Inconel 718
- (2008) Toshiyuki Obikawa et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Minimum quantity lubrication drilling of aluminium–silicon alloys in water using diamond-like carbon coated drills
- (2008) Sukanta Bhowmick et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- The effects of various cooling strategies on surface roughness and tool wear during soft materials milling
- (2008) B. Yalçın et al. MATERIALS & DESIGN
- Ionic Liquids as Lubricants of Titanium–Steel Contact
- (2008) Ana Eva Jiménez et al. TRIBOLOGY LETTERS
- Imidazolium ionic liquids as additives of the synthetic ester propylene glycol dioleate in aluminium–steel lubrication
- (2008) Ana-Eva Jiménez et al. WEAR
- Studies on minimum quantity lubrication (MQL) and air cooling at drilling
- (2007) B. Tasdelen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Machining of 6061 aluminium alloy with MQL, dry and flooded lubricant conditions
- (2007) P.S. Sreejith MATERIALS LETTERS
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started