标题
Rheology as a Tool for Fine-Tuning the Properties of Printable Bioinspired Gels
作者
关键词
-
出版物
MOLECULES
Volume 28, Issue 6, Pages 2766
出版商
MDPI AG
发表日期
2023-03-20
DOI
10.3390/molecules28062766
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
- (2023) Laleh Solhi et al. Chemical Reviews
- Advances in the Design of Phenylboronic Acid-Based Glucose-Sensitive Hydrogels
- (2023) Simona Morariu Polymers
- Development of Polyurethane/Peptide-Based Carriers with Self-Healing Properties
- (2023) Luiza Madalina Gradinaru et al. Polymers
- Responsive biomaterials for 3D bioprinting: A review
- (2022) Zhouquan Fu et al. Materials Today
- Silk Fibroin-Based Biomaterials for Tissue Engineering Applications
- (2022) Guangfei Li et al. MOLECULES
- Three-Dimensional Bioprinting of Decellularized Extracellular Matrix-Based Bioinks for Tissue Engineering
- (2022) Chun-Yang Zhang et al. MOLECULES
- Optimization of the Rheological Properties of Self-Assembled Tripeptide/Alginate/Cellulose Hydrogels for 3D Printing
- (2022) Alejandro Hernández-Sosa et al. Polymers
- Rheological analysis of bio-ink for 3D bio-printing processes
- (2022) Md Ahasan Habib et al. Journal of Manufacturing Processes
- Towards the Development of 3D-Printed Food: A Rheological and Mechanical Approach
- (2022) Viridiana Tejada-Ortigoza et al. Foods
- Review of extrusion-based multi-material bioprinting processes
- (2022) Nicholas Betancourt et al. Bioprinting
- Self-Healing Injectable Hydrogels for Tissue Regeneration
- (2022) Pascal Bertsch et al. CHEMICAL REVIEWS
- Defects in 3D/4D food printing and their possible solutions: A comprehensive review
- (2022) Pattarapon Phuhongsung et al. COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY
- Bioinspired Hydrogels as Platforms for Life-Science Applications: Challenges and Opportunities
- (2022) Maria Bercea Polymers
- "RHEOLOGICAL PROPERTIES OF SALICYL-IMINE-CHITOSAN HYDROGELS: EFFECT OF CROSSLINKING DENSITY "
- (2022) MANUELA-MARIA IFTIME et al. CELLULOSE CHEMISTRY AND TECHNOLOGY
- Bioinspired fabrication of self-recovery, adhesive, and flexible conductive hydrogel sensor driven by dynamic borate ester bonds and tannic acid-mediated noncovalent network
- (2022) Lihong Xiong et al. EUROPEAN POLYMER JOURNAL
- Immediate release 3D printed oral dosage forms: How different polymers have been explored to reach suitable drug release behaviour
- (2022) Nadine Lysyk Funk et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Rheology of highly ordered smectic phases based on biphenyl derivatives
- (2022) Sergey O. Ilyin et al. JOURNAL OF MOLECULAR LIQUIDS
- Thermosensitive gels of pullulan and poloxamer 407 as potential injectable biomaterials
- (2022) Maria Bercea et al. JOURNAL OF MOLECULAR LIQUIDS
- In situ volumetric imaging and analysis of FRESH 3D bioprinted constructs using optical coherence tomography
- (2022) Joshua W Tashman et al. Biofabrication
- Fractional Calculus Approach to Reproduce Material Viscoelastic Behavior, including the Time–Temperature Superposition Phenomenon
- (2022) Andrea Genovese et al. Polymers
- Biocompatible drug delivery systems able to co-deliver antifungal and antiviral agents
- (2022) Daniela Ailincai et al. CARBOHYDRATE POLYMERS
- Rheology and tribology of nanocellulose-based biodegradable greases: Wear and friction protection mechanisms of cellulose microfibrils
- (2022) Sergey O. Ilyin et al. TRIBOLOGY INTERNATIONAL
- High-Frequency Rheological and Piezo-Voltage Waveform Characterization of Inkjet-Printed Polymer-Based Dopant-Source Inks
- (2022) Zulkifl Hussain et al. Micromachines
- Development of an extrusion-based 3D-printing strategy for clustering of human neural progenitor cells
- (2022) Ines Bilkic et al. Heliyon
- Mathematical modeling of high-energy materials rheological behavior in 3D printing technology
- (2022) Olga Kudryashova et al. Heliyon
- Printability in extrusion bioprinting
- (2021) Zhouquan Fu et al. Biofabrication
- Printability – a Key Issue in Extrusion-based Bioprinting
- (2021) Saman Naghieh et al. Journal of Pharmaceutical Analysis
- Chitosan hydrogels in 3D printing for biomedical applications
- (2021) Mina Rajabi et al. CARBOHYDRATE POLYMERS
- Advanced Strategies for Tissue Engineering in Regenerative Medicine: A Biofabrication and Biopolymer Perspective
- (2021) Courtney R. Lynch et al. MOLECULES
- Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications
- (2021) Amit M. E. Arefin et al. Polymers
- Shear flow of associative polymers in aqueous solutions
- (2021) Maria Bercea et al. JOURNAL OF MOLECULAR STRUCTURE
- Rheological characterisation of ceramic inks for 3D direct ink writing: A review
- (2021) Laura del-Mazo-Barbara et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Extrusion-Based 3D Food Printing: Technological Approaches, Material Characteristics, Printing Stability, and Post-processing
- (2021) Saddam Hussain et al. Food Engineering Reviews
- Bioprinting: A review of processes, materials and applications
- (2021) Bengi Yilmaz et al. Bioprinting
- Rheological behavior of nanocellulose gels at various calcium chloride concentrations
- (2021) Rui-jing Qu et al. CARBOHYDRATE POLYMERS
- Modeling creep/recovery behavior of cold-set gels using different approaches
- (2021) Thais C. Brito-Oliveira et al. FOOD HYDROCOLLOIDS
- Tailoring the properties of PVA/HPC/BSA hydrogels for wound dressing applications
- (2021) Maria Bercea et al. REACTIVE & FUNCTIONAL POLYMERS
- Self-Healing Behavior of Polymer/Protein Hybrid Hydrogels
- (2021) Maria Bercea Polymers
- Viscoelasticity Acts as a Marker for Tumor Extracellular Matrix Characteristics
- (2021) Claudia Tanja Mierke Frontiers in Cell and Developmental Biology
- Bio-inspired hydrogel composed of hyaluronic acid and alginate as a potential bioink for 3D bioprinting of articular cartilage engineering constructs
- (2020) Cristina Antich et al. Acta Biomaterialia
- From Shape to Function: The Next Step in Bioprinting
- (2020) Riccardo Levato et al. ADVANCED MATERIALS
- Factors affecting 3D printing and post-processing capacity of cookie dough
- (2020) Ezgi Tekin Pulatsu et al. Innovative Food Science & Emerging Technologies
- An Interpenetrating Alginate/Gelatin Network for Three-Dimensional (3D) Cell Cultures and Organ Bioprinting
- (2020) Qiuhong Chen et al. MOLECULES
- Engineering considerations on extrusion-based bioprinting: interactions of material behaviour, mechanical forces and cells in the printing needle
- (2020) Julia Emmermacher et al. Biofabrication
- Freeze-FRESH: A 3D Printing Technique to Produce Biomaterial Scaffolds with Hierarchical Porosity
- (2020) Zi Wang et al. Materials
- Dynamic Bioinks to Advance Bioprinting
- (2020) Francis L. C. Morgan et al. Advanced Healthcare Materials
- 3D Printing of Drug-Loaded Thermoplastic Polyurethane Meshes: A Potential Material for Soft Tissue Reinforcement in Vaginal Surgery
- (2020) Juan Domínguez-Robles et al. Pharmaceutics
- Cellulose Nanocrystal Reinforced Collagen-Based Nanocomposite Hydrogel with Self-Healing and Stress-Relaxation Properties for Cell Delivery
- (2020) Shuang Zhang et al. BIOMACROMOLECULES
- Fabrication of versatile dynamic hyaluronic acid-based hydrogels
- (2020) Wen Shi et al. CARBOHYDRATE POLYMERS
- Rheology and tribology of ester-based greases with microcrystalline cellulose and organomodified montmorillonite
- (2020) Svetlana N. Gorbacheva et al. TRIBOLOGY INTERNATIONAL
- 3D printing of gelatin methacrylate-based nerve guidance conduits with multiple channels
- (2020) Wensong Ye et al. MATERIALS & DESIGN
- Printability and Shape Fidelity of Bioinks in 3D Bioprinting
- (2020) Andrea Schwab et al. CHEMICAL REVIEWS
- 3D Printing of a Reactive Hydrogel Bio-Ink Using a Static Mixing Tool
- (2020) María Puertas-Bartolomé et al. Polymers
- Injectability of Thermosensitive, Low-Concentrated Chitosan Colloids as Flow Phenomenon through the Capillary under High Shear Rate Conditions
- (2020) Anna Rył et al. Polymers
- Plant-based nanocellulose: A review of routine and recent preparation methods with current progress in its applications as rheology modifier and 3D bioprinting
- (2020) Chandravati Yadav et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Extrusion-based printing of chitosan scaffolds and their in vitro characterization for cartilage tissue engineering
- (2020) Ali Sadeghianmaryan et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Biomechanical factors in three-dimensional tissue bioprinting
- (2020) Liqun Ning et al. Applied Physics Reviews
- Tailoring of the rheological properties of bioinks to improve bioprinting and bioassembly for tissue replacement
- (2020) Mario Chopin-Doroteo et al. BIOCHIMICA ET BIOPHYSICA ACTA-GENERAL SUBJECTS
- Preparation of high thermal stability gelatin emulsion and its application in 3D printing
- (2020) Jie Du et al. FOOD HYDROCOLLOIDS
- Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic acid Hydrogels for Bioprinting
- (2019) Emi A. Kiyotake et al. Acta Biomaterialia
- Flow Behavior Prior to Crosslinking: The Need for Precursor Rheology for Placement of Hydrogels in Medical Applications and for 3D Bioprinting
- (2019) Jakob M. Townsend et al. PROGRESS IN POLYMER SCIENCE
- Polysaccharide hydrogels for multiscale 3D printing of pullulan scaffolds
- (2019) G. Della Giustina et al. MATERIALS & DESIGN
- Resolution and shape in bioprinting: Strategizing towards complex tissue and organ printing
- (2019) Jia Min Lee et al. Applied Physics Reviews
- Alginate/Gelatin Hydrogels Reinforced with TiO2 and β-TCP Fabricated by Microextrusion-based Printing for Tissue Regeneration
- (2019) Rodrigo Urruela-Barrios et al. Polymers
- Interpenetrated polymer network with modified chitosan in composition and self-healing properties
- (2019) Alina Gabriela Rusu et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- On Low-Concentration Inks Formulated by Nanocellulose Assisted with Gelatin Methacrylate (GelMA) for 3D Printing toward Wound Healing Application
- (2019) Wenyang Xu et al. ACS Applied Materials & Interfaces
- Effect of cross-linking on the dimensional stability and biocompatibility of a tailored 3D-bioprinted gelatin scaffold
- (2019) Dong Jin Choi et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- A review of thixotropy and its rheological modeling
- (2019) Ronald G. Larson et al. JOURNAL OF RHEOLOGY
- Indirect 3D bioprinting and characterization of alginate scaffolds for potential nerve tissue engineering applications
- (2019) Saman Naghieh et al. Journal of the Mechanical Behavior of Biomedical Materials
- 3D Bioprinted Nanocellulose-Based Hydrogels for Tissue Engineering Applications: A Brief Review
- (2019) Sandya S. Athukoralalage et al. Polymers
- Printability and cell viability in bioprinting alginate dialdehyde-gelatin scaffolds
- (2019) Nikoo Soltan et al. ACS Biomaterials-Science & Engineering
- High density cell seeding affects the rheology and printability of collagen bioinks
- (2019) Nicole Diamantides et al. Biofabrication
- Thiol–Gelatin–Norbornene Bioink for Laser‐Based High‐Definition Bioprinting
- (2019) Agnes Dobos et al. Advanced Healthcare Materials
- 3D and 4D Printing of Polymers for Tissue Engineering Applications
- (2019) Dilara Goksu Tamay et al. Frontiers in Bioengineering and Biotechnology
- Fabrication of Gel-Like Emulsions with Whey Protein Isolate Using Microfluidization: Rheological Properties and 3D Printing Performance
- (2019) Yaowei Liu et al. Food and Bioprocess Technology
- Hybrid Laser Printing of 3D, Multiscale, Multimaterial Hydrogel Structures
- (2019) Puskal Kunwar et al. Advanced Optical Materials
- Rheological approach for an additive manufacturing printer based on material extrusion
- (2019) Larissa Cristina Sanchez et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting
- (2019) Myoung Hwan Kim et al. Journal of the Mechanical Behavior of Biomedical Materials
- Versatile poly(vinyl alcohol)/clay physical hydrogels with tailorable structure as potential candidates for wound healing applications
- (2019) Simona Morariu et al. Materials Science & Engineering C-Materials for Biological Applications
- Viscoelastic behaviour of self‐assembling polyurethane and poly(vinyl alcohol)
- (2019) Maria Bercea et al. POLYMER INTERNATIONAL
- Impact of thermal treatment on the rheological, microstructural, protein structures and extrusion 3D printing characteristics of egg yolk
- (2019) Lilan Xu et al. FOOD HYDROCOLLOIDS
- Extrusion-based 3D printing of food pastes: Correlating rheological properties with printing behaviour
- (2019) Sicong Zhu et al. Innovative Food Science & Emerging Technologies
- Melt electrohydrodynamic 3D printed poly (ε-caprolactone)/polyethylene glycol/roxithromycin scaffold as a potential anti-infective implant in bone repair
- (2019) Jianfu Bai et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D Bioprinting of Low-Concentration Cell-Laden Gelatin Methacrylate (GelMA) Bioinks with a Two-Step Cross-linking Strategy
- (2018) Jun Yin et al. ACS Applied Materials & Interfaces
- Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
- (2018) David Chimene et al. ACS Applied Materials & Interfaces
- Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
- (2018) Michael K. Hausmann et al. ACS Nano
- Distinguishing dynamic and static yield stress of fresh cement mortars through thixotropy
- (2018) Ye Qian et al. CEMENT & CONCRETE COMPOSITES
- Creation of internal structure of mashed potato construct by 3D printing and its textural properties
- (2018) Zhenbin Liu et al. FOOD RESEARCH INTERNATIONAL
- Effect of gums on the rheological, microstructural and extrusion printing characteristics of mashed potatoes
- (2018) Zhenbin Liu et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Photocurable poly(ethylene glycol) as a bioink for the inkjet 3D pharming of hydrophobic drugs
- (2018) Giovanny F. Acosta-Vélez et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Three-dimensional extrusion bioprinting of single- and double-network hydrogels containing dynamic covalent crosslinks
- (2018) Leo L. Wang et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Additive layer manufacturing of semi-hard model cheese: Effect of calcium levels on thermo-rheological properties and shear behavior
- (2018) Christian Kern et al. JOURNAL OF FOOD ENGINEERING
- Impact of rheological properties of mashed potatoes on 3D printing
- (2018) Zhenbin Liu et al. JOURNAL OF FOOD ENGINEERING
- Influence of crosslinking on the mechanical behavior of 3D printed alginate scaffolds: Experimental and numerical approaches
- (2018) Saman Naghieh et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting
- (2018) Michael Di Giuseppe et al. Journal of the Mechanical Behavior of Biomedical Materials
- Dual extrusion 3D printing of mashed potatoes/strawberry juice gel
- (2018) Zhenbin Liu et al. LWT-FOOD SCIENCE AND TECHNOLOGY
- Tuning the associative properties and micelles geometry by stepwise quaternization of PDMAEMA
- (2018) Ecaterina Stela Dragan et al. REACTIVE & FUNCTIONAL POLYMERS
- 3D Printing Pharmaceuticals: Drug Development to Frontline Care
- (2018) Sarah J. Trenfield et al. TRENDS IN PHARMACOLOGICAL SCIENCES
- 3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
- (2018) Ahasan Habib et al. Materials
- Bioinks for 3D bioprinting: an overview
- (2018) P. Selcan Gungor-Ozkerim et al. Biomaterials Science
- Processing and Properties of Chitosan Inks for 3D Printing of Hydrogel Microstructures
- (2018) Qinghua Wu et al. ACS Biomaterials-Science & Engineering
- Processing and Properties of Chitosan Inks for 3D Printing of Hydrogel Microstructures
- (2018) Qinghua Wu et al. ACS Biomaterials Science & Engineering
- Synthesis and Characterization of Dual Stimuli-Sensitive Biodegradable Polyurethane Soft Hydrogels for 3D Cell-Laden Bioprinting
- (2018) Shih-Hsiang Hsiao et al. ACS Applied Materials & Interfaces
- In Situ Cross-Linkable Hydrogels as a Dynamic Matrix for Tissue Regenerative Medicine
- (2018) Kyung Min Park et al. Tissue Engineering and Regenerative Medicine
- Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering
- (2018) Gabriel R. López-Marcial et al. ACS Biomaterials-Science & Engineering
- 3D bioprinting of gellan gum and poly (ethylene glycol) diacrylate based hydrogels to produce human-scale constructs with high-fidelity
- (2018) Dongwei Wu et al. MATERIALS & DESIGN
- 3D food printing: main components selection by considering rheological properties
- (2018) Hao Jiang et al. CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION
- Effect of Hydrocolloids on Rheological Properties and Printability of Vegetable Inks for 3D Food Printing
- (2018) Hyun Woo Kim et al. JOURNAL OF FOOD SCIENCE
- Evaluation of bioink printability for bioprinting applications
- (2018) Zhengyi Zhang et al. Applied Physics Reviews
- Linking rheology and printability of a multicomponent gel system of carrageenan-xanthan-starch in extrusion based additive manufacturing
- (2018) Zhenbin Liu et al. FOOD HYDROCOLLOIDS
- Current advances and future perspectives of 3D printing natural-derived biopolymers
- (2018) Jun Liu et al. CARBOHYDRATE POLYMERS
- Whey protein gelation induced by enzymatic hydrolysis and heat treatment: Comparison of creep and recovery behavior
- (2017) Maria Julia Spotti et al. FOOD HYDROCOLLOIDS
- Modeling the Flow Behavior and Flow Rate of Medium Viscosity Alginate for Scaffold Fabrication With a Three-Dimensional Bioplotter
- (2017) Md. Sarker et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Characterizing the feasibility of processing wet granular materials to improve rheology for 3D printing
- (2017) Michael Sweeney et al. JOURNAL OF MATERIALS SCIENCE
- Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
- (2017) Ze-Xian Low et al. JOURNAL OF MEMBRANE SCIENCE
- Nanoengineered Colloidal Inks for 3D Bioprinting
- (2017) Charles W. Peak et al. LANGMUIR
- Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
- (2017) Claudia Loebel et al. Nature Protocols
- Magnetic resonance imaging-three-dimensional printing technology fabricates customized scaffolds for brain tissue engineering
- (2017) Ming-liang Zhao et al. Neural Regeneration Research
- 3D printing: Printing precision and application in food sector
- (2017) Zhenbin Liu et al. TRENDS IN FOOD SCIENCE & TECHNOLOGY
- Extrusion Bioprinting of Shear-Thinning Gelatin Methacryloyl Bioinks
- (2017) Wanjun Liu et al. Advanced Healthcare Materials
- Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing
- (2017) Amin M’Barki et al. Scientific Reports
- A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo-crosslinkable Inks
- (2016) Liliang Ouyang et al. ADVANCED MATERIALS
- Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications
- (2016) Michael Müller et al. ANNALS OF BIOMEDICAL ENGINEERING
- A new photocrosslinkable polycaprolactone-based ink for three-dimensional inkjet printing
- (2016) Yinfeng He et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- On different ways of measuring “the” yield stress
- (2016) Maureen Dinkgreve et al. JOURNAL OF NON-NEWTONIAN FLUID MECHANICS
- Rheological investigation of poly(vinyl alcohol)/poly(N-vinyl pyrrolidone) mixtures in aqueous solution and hydrogel state
- (2016) Maria Bercea et al. JOURNAL OF POLYMER RESEARCH
- Bioprinting of Thermoresponsive Hydrogels for Next Generation Tissue Engineering: A Review
- (2016) Ratima Suntornnond et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Biodegradable Polymers and Stem Cells for Bioprinting
- (2016) Meijuan Lei et al. MOLECULES
- Bioprinting and Differentiation of Stem Cells
- (2016) Scott Irvine et al. MOLECULES
- Influence of Flow Behavior of Alginate–Cell Suspensions on Cell Viability and Proliferation
- (2016) Liqun Ning et al. TISSUE ENGINEERING PART C-METHODS
- 3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
- (2016) Stephanie Rhee et al. ACS Biomaterials-Science & Engineering
- 3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
- (2016) Liliang Ouyang et al. ACS Biomaterials-Science & Engineering
- 3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
- (2016) Stephanie Rhee et al. ACS Biomaterials Science & Engineering
- 3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
- (2016) Liliang Ouyang et al. ACS Biomaterials Science & Engineering
- Bioplotting Alginate/Hyaluronic Acid Hydrogel Scaffolds with Structural Integrity and Preserved Schwann Cell Viability
- (2016) Ajay Rajaram et al. 3D Printing and Additive Manufacturing
- Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink
- (2015) Cristina Colosi et al. ADVANCED MATERIALS
- Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels
- (2015) Christopher B. Highley et al. ADVANCED MATERIALS
- 3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
- (2015) Kajsa Markstedt et al. BIOMACROMOLECULES
- Dual-Responsive Hydrogels for Direct-Write 3D Printing
- (2015) Musan Zhang et al. MACROMOLECULES
- Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity
- (2015) Andreas Blaeser et al. Advanced Healthcare Materials
- Shear-Thinning Supramolecular Hydrogels with Secondary Autonomous Covalent Crosslinking to Modulate Viscoelastic Properties In Vivo
- (2014) Christopher B. Rodell et al. ADVANCED FUNCTIONAL MATERIALS
- Effect of gums on the rheological characteristics and microstructure of acid-induced SPI-gum mixed gels
- (2014) Yuan-yuan Chang et al. CARBOHYDRATE POLYMERS
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
- (2014) Luiz E Bertassoni et al. Biofabrication
- Synthesis and 3D Printing of Biodegradable Polyurethane Elastomer by a Water-Based Process for Cartilage Tissue Engineering Applications
- (2014) Kun-Che Hung et al. Advanced Healthcare Materials
- Rational Design of Network Properties in Guest–Host Assembled and Shear-Thinning Hyaluronic Acid Hydrogels
- (2013) Christopher B. Rodell et al. BIOMACROMOLECULES
- The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability
- (2013) Thomas Billiet et al. BIOMATERIALS
- Oral processing, texture and mouthfeel: From rheology to tribology and beyond
- (2013) Jason R. Stokes et al. CURRENT OPINION IN COLLOID & INTERFACE SCIENCE
- Desktop 3D printing of controlled release pharmaceutical bilayer tablets
- (2013) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Quantitative Contrasts in the Photopolymerization of Acrylamide and Methacrylamide-Functionalized Gelatin Hydrogel Building Blocks
- (2013) Thomas Billiet et al. MACROMOLECULAR BIOSCIENCE
- Bio-ink properties and printability for extrusion printing living cells
- (2013) Johnson H. Y. Chung et al. Biomaterials Science
- Hyaluronic acid based scaffolds for tissue engineering—A review
- (2012) Maurice N. Collins et al. CARBOHYDRATE POLYMERS
- Rheological analysis of emulsion-filled gels based on high acyl gellan gum
- (2012) Gabriel Lorenzo et al. FOOD HYDROCOLLOIDS
- Effect of needle geometry on flow rate and cell damage in the dispensing-based biofabrication process
- (2011) Minggan Li et al. BIOTECHNOLOGY PROGRESS
- Modeling macromolecular movement in polymer melts and its relation to nonlinear rheology
- (2011) Alexander Ya. Malkin et al. RHEOLOGICA ACTA
- Improving Viability of Stem Cells During Syringe Needle Flow Through the Design of Hydrogel Cell Carriers
- (2011) Brian A. Aguado et al. TISSUE ENGINEERING PART A
- Yield Stress in Foods: Measurements and Applications
- (2010) Adriano Sun et al. INTERNATIONAL JOURNAL OF FOOD PROPERTIES
- Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
- (2010) Saif Khalil et al. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
- Thixotropic property in pharmaceutical formulations
- (2009) Chi H. Lee et al. JOURNAL OF CONTROLLED RELEASE
- A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds
- (2009) A Tirella et al. Biofabrication
- Thixotropy
- (2008) Jan Mewis et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started