标题
Physical metallurgy of medium-Mn advanced high-strength steels
作者
关键词
-
出版物
INTERNATIONAL MATERIALS REVIEWS
Volume -, Issue -, Pages 1-39
出版商
Informa UK Limited
发表日期
2023-01-13
DOI
10.1080/09506608.2022.2153220
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Microstructure and Plasticity Evolution During Lüders Deformation in an Fe-5Mn-0.1C Medium-Mn Steel
- (2022) Motomichi Koyama et al. ISIJ INTERNATIONAL
- Effect of Intercritical Annealing Parameters and Starting Microstructure on the Microstructural Evolution and Mechanical Properties of a Medium-Mn Third Generation Advanced High Strength Steel
- (2022) Kazi M. H. Bhadhon et al. Metals
- The dual role of martensitic transformation in fatigue crack growth
- (2022) Xiaogang Wang et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- A sustainable ultra-high strength Fe18Mn3Ti maraging steel through controlled solute segregation and α-Mn nanoprecipitation
- (2022) A. Kwiatkowski da Silva et al. Nature Communications
- Austenite reversion and nano-precipitation during a compact two-step heat treatment of medium-Mn steel containing Cu and Ni
- (2022) Zigan Xu et al. Journal of Materials Research and Technology-JMR&T
- The failure mechanism of resistance spot welded third-generation medium-Mn steel during shear-tension loading
- (2022) Shadab Sarmast-Ghahfarokhi et al. Journal of Manufacturing Processes
- Hydrogen-associated decohesion and localized plasticity in a high-Mn and high-Al two-phase lightweight steel
- (2022) Xizhen Dong et al. ACTA MATERIALIA
- Hydrogen-assisted decohesion associated with nanosized grain boundary κ-carbides in a high-Mn lightweight steel
- (2022) Mohamed Naguib Elkot et al. ACTA MATERIALIA
- Competing deformation mechanisms in an austenite-ferrite medium-Mn steel at different strain rates
- (2021) Z.H. Cai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Current Challenges and Opportunities Toward Understanding Hydrogen Embrittlement Mechanisms in Advanced High-Strength Steels: A Review
- (2021) Binhan Sun et al. Acta Metallurgica Sinica-English Letters
- Austenite formation and cementite dissolution during intercritical annealing of a medium-manganese steel from a martensitic condition
- (2021) J.J. Mueller et al. MATERIALS & DESIGN
- Dynamic strain aging mechanisms in a metastable austenitic stainless steel
- (2021) Javad Mola et al. ACTA MATERIALIA
- Localized deformation inside the Lüders front of a medium manganese steel
- (2021) Rama Srinivas Varanasi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Chemical heterogeneity enhances hydrogen resistance in high-strength steels
- (2021) Binhan Sun et al. NATURE MATERIALS
- Enhanced ductility of as-quenched martensite by highly stable nano-sized austenite
- (2021) Ji Hoon Kim et al. SCRIPTA MATERIALIA
- Microstructure and tensile properties of chemically heterogeneous steel consisting of martensite and austenite
- (2021) Ji Hoon Kim et al. ACTA MATERIALIA
- The mechanism of dynamic strain aging for type A serrations in tensile flow curves of Fe-18Mn-0.55C (wt.%) twinning-induced plasticity steel
- (2020) Seon-Keun Oh et al. ACTA MATERIALIA
- Design of a high strength, high ductility 12 wt% Mn medium manganese steel with hierarchical deformation behaviour
- (2020) T.W.J. Kwok et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Making ultrastrong steel tough by grain-boundary delamination
- (2020) L. Liu et al. SCIENCE
- Manganese micro-segregation governed austenite re-reversion and its mechanical effects
- (2020) Meimei Wang et al. SCRIPTA MATERIALIA
- Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels
- (2020) Ran Ding et al. Science Advances
- Kinetic transitions and Mn partitioning during austenite growth from a mixture of partitioned cementite and ferrite: Role of heating rate
- (2020) Geng Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- The possibility of enhanced hydrogen embrittlement resistance of medium-Mn steels by addition of micro-alloying elements
- (2020) Tak Min Park et al. MATERIALS CHARACTERIZATION
- Transformation-induced plasticity (TRIP) in advanced steels: A review
- (2020) Maryam Soleimani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing and Properties of Medium-Mn TRIP Steel to Obtain a Two-Stage TRIP Behavior
- (2020) D. M. Field et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the Factors Governing Austenite Stability: Intrinsic versus Extrinsic
- (2020) Binbin He Materials
- Austenite formation kinetics from multicomponent cementite-ferrite aggregates
- (2020) Y.X. Wu et al. ACTA MATERIALIA
- Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels
- (2020) Dierk Raabe et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Heterostructured materials: superior properties from hetero-zone interaction
- (2020) Yuntian Zhu et al. Materials Research Letters
- On the role of chemical heterogeneity in phase transformations and mechanical behavior of flash annealed quenching & partitioning steels
- (2020) Geng Liu et al. ACTA MATERIALIA
- Fundamentals and application of solid-state phase transformations for advanced high strength steels containing metastable retained austenite
- (2020) Zongbiao Dai et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Intercritical annealing to achieve a positive strain-rate sensitivity of mechanical properties and suppression of macroscopic plastic instabilities in multi-phase medium-Mn steels
- (2020) J.T. Benzing et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improved strength of a medium-Mn steel by V addition without sacrificing ductility
- (2020) Tak Min Park et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Recovering the ductility of medium-Mn steel by restoring the original microstructure
- (2020) Mun Sik Jeong et al. SCRIPTA MATERIALIA
- Critical role of Lüders banding in hydrogen embrittlement susceptibility of medium Mn steels
- (2020) Jun Zhang et al. SCRIPTA MATERIALIA
- Segregation-assisted spinodal and transient spinodal phase separation at grain boundaries
- (2020) Reza Darvishi Kamachali et al. npj Computational Materials
- A novel medium-Mn steel with superior mechanical properties and marginal oxidization after press hardening
- (2020) Shuoshuo Li et al. ACTA MATERIALIA
- The mechanism of dynamic strain aging for type A serrations in tensile curves of a medium-Mn steel
- (2020) Jae-Hoon Nam et al. ACTA MATERIALIA
- Occurrence of sub-critical heat affected zone liquid metal embrittlement in joining of advanced high strength steel
- (2020) C. DiGiovanni et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- An Automated Computational Approach for Complete In-Plane Compositional Interface Analysis by Atom Probe Tomography
- (2019) Zirong Peng et al. MICROSCOPY AND MICROANALYSIS
- Improving the ductility of ultrahigh-strength medium Mn steels via introducing pre-existed austenite acting as a “reservoir” for Mn atoms
- (2019) Binhan Sun et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel
- (2019) J.T. Benzing et al. ACTA MATERIALIA
- First-principles study on the grain boundary embrittlement of bcc-Fe by Mn segregation
- (2019) Kazuma Ito et al. PHYSICAL REVIEW MATERIALS
- Thermodynamics of grain boundary segregation, interfacial spinodal and their relevance for nucleation during solid-solid phase transitions
- (2019) A. Kwiatkowski da Silva et al. ACTA MATERIALIA
- Metastability alloy design
- (2019) Dierk Raabe et al. MRS BULLETIN
- Macro-to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: role of the austenite-ferrite interface
- (2019) Binhan Sun et al. ACTA MATERIALIA
- Revealing orientation-dependent martensitic transformation in a medium Mn steel by micropillar compression
- (2019) O.G. Nimaga et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Microscopic strain partitioning in Lüders band of an ultrafine-grained medium Mn steel
- (2019) X.G. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stabilizing austenite via a core-shell structure in the medium Mn steels
- (2019) Xinhao Wan et al. SCRIPTA MATERIALIA
- Development of a Cr-Ni-V-N Medium Manganese Steel with Balanced Mechanical and Corrosion Properties
- (2019) Tarek Allam et al. Metals
- Super-high-strength and formable medium Mn steel manufactured by warm rolling process
- (2019) Bin Hu et al. ACTA MATERIALIA
- Austenite morphology and resistance to hydrogen embrittlement in medium Mn transformation-induced plasticity steel
- (2019) Inkyun Jeong et al. SCRIPTA MATERIALIA
- The effect of alloying elements on cementite coarsening during martensite tempering
- (2019) Y.X. Wu et al. ACTA MATERIALIA
- Dependence of hydrogen embrittlement mechanisms on microstructure-driven hydrogen distribution in medium Mn steels
- (2019) Binhan Sun et al. ACTA MATERIALIA
- A novel cold-rolled medium Mn steel with an ultra-high product of tensile strength and elongation
- (2019) Feng Yang et al. MATERIALS LETTERS
- Novel medium-Mn (austenite + martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20 % ductility by Mn-segregation-induced TRIP mechanism
- (2018) Hyungsoo Lee et al. ACTA MATERIALIA
- Growth mode of austenite during reversion from martensite in Fe-2Mn-1.5Si-0.3C alloy: A transition in kinetics and morphology
- (2018) Xianguang Zhang et al. ACTA MATERIALIA
- The influence of silicon additions on the deformation behavior of austenite-ferrite duplex medium manganese steels
- (2018) Binhan Sun et al. ACTA MATERIALIA
- Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography
- (2018) A. Kwiatkowski da Silva et al. ACTA MATERIALIA
- Twinning-induced plasticity (TWIP) steels
- (2018) Bruno C. De Cooman et al. ACTA MATERIALIA
- Orientation of austenite reverted from martensite in Fe-2Mn-1.5Si-0.3C alloy
- (2018) Xianguang Zhang et al. ACTA MATERIALIA
- Partition and non-partition transition of austenite growth from a ferrite and cementite mixture in hypo- and hypereutectoid Fe-C-Mn alloys
- (2018) M. Enomoto et al. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- On the characteristics of Portevin–Le Chatelier bands in cold-rolled 7Mn steel showing transformation-induced plasticity
- (2018) Feng Yang et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions
- (2018) Binhan Sun et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Simulation of the Growth of Austenite from As-Quenched Martensite in Medium Mn Steels
- (2018) Fei Huyan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Room-Temperature Quenching and Partitioning Steel
- (2018) B. B. He et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Dynamic Strain Aging Phenomena and Tensile Response of Medium-Mn TRIP Steel
- (2018) Daniel M. Field et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Nanoindentation investigation on the initiation of yield point phenomenon in a medium Mn steel
- (2018) B.B. He et al. SCRIPTA MATERIALIA
- Advanced high strength steel (AHSS) development through chemical patterning of austenite
- (2018) W.W. Sun et al. SCRIPTA MATERIALIA
- Phase nucleation through confined spinodal fluctuations at crystal defects evidenced in Fe-Mn alloys
- (2018) A. Kwiatkowski da Silva et al. Nature Communications
- Strong and ductile medium Mn steel without transformation-induced plasticity effect
- (2018) B. B. He et al. Materials Research Letters
- Cementite coarsening during the tempering of Fe-C-Mn martensite
- (2018) Y.X. Wu et al. ACTA MATERIALIA
- Interfaces and defect composition at the near-atomic scale through atom probe tomography investigations
- (2018) Baptiste Gault et al. JOURNAL OF MATERIALS RESEARCH
- Effect of the heat treatment on the microstructure and mechanical properties of medium-Mn-steels
- (2018) Reinhold Schneider et al. MATERIALS SCIENCE AND TECHNOLOGY
- In situ high-energy X-ray diffraction mapping of Lüders band propagation in medium-Mn transformation-induced plasticity steels
- (2018) Minghe Zhang et al. Materials Research Letters
- Effect of carbon on strain-rate and temperature sensitivity of twinning-induced plasticity steels: Modeling and experiments
- (2018) Y.Z. Li et al. ACTA MATERIALIA
- Martensite to austenite reversion in a high-Mn steel: Partitioning-dependent two-stage kinetics revealed by atom probe tomography, in-situ magnetic measurements and simulation
- (2018) I.R. Souza Filho et al. ACTA MATERIALIA
- Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite
- (2018) Binhan Sun et al. ACTA MATERIALIA
- Crucial microstructural feature to determine the impact toughness of intercritically annealed medium-Mn steel with triplex-phase microstructure
- (2018) Min Tae Kim et al. ACTA MATERIALIA
- Overview of hydrogen embrittlement in high-Mn steels
- (2017) Motomichi Koyama et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Effects of the austenitizing temperature on the mechanical properties of cold-rolled medium-Mn steel system
- (2017) Z.Z. Zhao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Recent progress in medium-Mn steels made with new designing strategies, a review
- (2017) Bin Hu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- A novel ultrafine-grained Fe 22Mn 0.6C TWIP steel with superior strength and ductility
- (2017) Y.Z. Tian et al. MATERIALS CHARACTERIZATION
- Dislocation activities at the martensite phase transformation interface in metastable austenitic stainless steel: An in-situ TEM study
- (2017) Jiabin Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of fracture in medium Mn steel
- (2017) Hongki Choi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of hot-rolled medium-Mn steel containing 3% aluminum
- (2017) Chengwei Shao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure, plastic flow and fracture behavior of ferrite-austenite duplex low density medium Mn steel
- (2017) Quentin Tonizzo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation behavior in cold-rolled medium-manganese TRIP steel and effect of pre-strain on the Lüders bands
- (2017) Z.C. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Medium-manganese steels processed by austenite-reverted-transformation annealing for automotive applications
- (2017) Yan Ma MATERIALS SCIENCE AND TECHNOLOGY
- Modeling of the Recrystallization and Austenite Formation Overlapping in Cold-Rolled Dual-Phase Steels During Intercritical Treatments
- (2017) M. Ollat et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of Temperature and Grain Size on Austenite Stability in Medium Manganese Steels
- (2017) Yulong Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Current state of Fe-Mn-Al-C low density steels
- (2017) Shangping Chen et al. PROGRESS IN MATERIALS SCIENCE
- High dislocation density–induced large ductility in deformed and partitioned steels
- (2017) B. B. He et al. SCIENCE
- Bone-like crack resistance in hierarchical metastable nanolaminate steels
- (2017) Motomichi Koyama et al. SCIENCE
- Critical role of strain partitioning and deformation twinning on cracking phenomenon occurring during cold rolling of two duplex medium manganese steels
- (2017) Binhan Sun et al. SCRIPTA MATERIALIA
- Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel
- (2017) Binhan Sun et al. SCRIPTA MATERIALIA
- Medium Mn transformation-induced plasticity steels: Recent progress and challenges
- (2017) Dong-Woo Suh et al. SCRIPTA MATERIALIA
- On the Damage Behavior of a 0.1C6Mn Medium-Mn Steel
- (2017) Katharina Steineder et al. STEEL RESEARCH INTERNATIONAL
- Ultrahigh Charpy impact toughness (~450J) achieved in high strength ferrite/martensite laminated steels
- (2017) Wenquan Cao et al. Scientific Reports
- Microstructure and mechanical properties of fibre laser welded medium manganese TRIP steel
- (2017) N. Lun et al. MATERIALS & DESIGN
- Dramatic improvement of strain hardening and ductility to 95% in highly-deformable high-strength duplex lightweight steels
- (2017) Seok Su Sohn et al. Scientific Reports
- Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+TRIP steel
- (2016) Marat I. Latypov et al. ACTA MATERIALIA
- The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel
- (2016) Jeongho Han et al. ACTA MATERIALIA
- Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel
- (2016) Eun Jung Seo et al. ACTA MATERIALIA
- Experimental investigation on a novel medium Mn steel combining transformation-induced plasticity and twinning-induced plasticity effects
- (2016) B.B. He et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Prevention of Hydrogen Embrittlement in Steels
- (2016) Harshad Kumar Dharamshi Hansraj Bhadeshia ISIJ INTERNATIONAL
- Effect of Strain-Induced Age Hardening on Yield Strength Improvement in Ferrite-Austenite Duplex Lightweight Steels
- (2016) Hyejin Song et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Phase Transformation Behavior of Medium Manganese Steels with 3 Wt Pct Aluminum and 3 Wt Pct Silicon During Intercritical Annealing
- (2016) Binhan Sun et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Deformation Behavior in Medium Mn Steel of Nanometer-Sized α′ + γ Lamellar Structure
- (2016) Yoon-Uk Heo et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure Evolution of a Medium Manganese Steel During Thermomechanical Processing
- (2016) Binhan Sun et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Analysis of the Tensile Behavior of 12 pct Mn Multi-phase (α + γ) TWIP + TRIP Steel by Neutron Diffraction
- (2016) Sangwon Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Austenite Stability on Microstructural Evolution and Tensile Properties in Intercritically Annealed Medium-Mn Lightweight Steels
- (2016) Hyejin Song et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel
- (2016) Qingquan Lai et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and mechanical properties of a medium manganese steel treated with interrupted quenching and intercritical annealing
- (2016) Toshihiro Tsuchiyama et al. SCRIPTA MATERIALIA
- Near-A c3 austenitized ultra-fine-grained quenching and partitioning (Q&P) steel
- (2016) Lawrence Cho et al. SCRIPTA MATERIALIA
- Effect of annealing temperature on the microstructure and tensile properties of Fe–10Mn–10Al–0.7C low-density steel
- (2016) Chao Zhao et al. MATERIALS & DESIGN
- The effect of grain size on the twin initiation stress in a TWIP steel
- (2015) K.M. Rahman et al. ACTA MATERIALIA
- Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels
- (2015) Hung-Wei Yen et al. ACTA MATERIALIA
- The mechanism of bcc α′ nucleation in single hcp ε laths in the fcc γ → hcp ε → bcc α′ martensitic phase transformation
- (2015) Xu-Sheng Yang et al. ACTA MATERIALIA
- Coupled strengthening in a medium manganese lightweight steel with an inhomogeneously grained structure of austenite
- (2015) Chan-Young Lee et al. ACTA MATERIALIA
- Multiphase microstructures via confined precipitation and dissolution of vessel phases: Example of austenite in martensitic steel
- (2015) M. Belde et al. ACTA MATERIALIA
- Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: Example of a 9 wt.% medium Mn steel
- (2015) Margarita Kuzmina et al. ACTA MATERIALIA
- Nanolaminate transformation-induced plasticity–twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance
- (2015) M.-M. Wang et al. ACTA MATERIALIA
- An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design
- (2015) C.C. Tasan et al. Annual Review of Materials Research
- Effect of Interpass Time on the Dynamic Transformation of a Plain C–Mn and a Nb Microalloyed Steel
- (2015) Clodualdo Aranas et al. ISIJ INTERNATIONAL
- Damage and fracture of dual-phase steels: Influence of martensite volume fraction
- (2015) Q. Lai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Annealing Time on Microstructural Evolution and Deformation Characteristics in 10Mn1.5Al TRIP Steel
- (2015) Qihang Han et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Enhancing Hydrogen Embrittlement Resistance of Lath Martensite by Introducing Nano-Films of Interlath Austenite
- (2015) Meimei Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Observation of the TWIP + TRIP Plasticity-Enhancement Mechanism in Al-Added 6 Wt Pct Medium Mn Steel
- (2015) Seawoong Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Analysis of the mobility of migrating austenite–ferrite interfaces
- (2015) E. Gamsjäger et al. PHILOSOPHICAL MAGAZINE
- Linear complexions: Confined chemical and structural states at dislocations
- (2015) M. Kuzmina et al. SCIENCE
- Effect of aluminium on hydrogen permeation of high-manganese twinning-induced plasticity steel
- (2015) D.K. Han et al. SCRIPTA MATERIALIA
- Effect of intercritical annealing on the Lüders strains of medium Mn transformation-induced plasticity steels
- (2015) Haiwen Luo et al. MATERIALS & DESIGN
- The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe–9Mn–0.05C steel
- (2014) Jeongho Han et al. ACTA MATERIALIA
- Novel ferrite–austenite duplex lightweight steel with 77% ductility by transformation induced plasticity and twinning induced plasticity mechanisms
- (2014) Seok Su Sohn et al. ACTA MATERIALIA
- The effects of the heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels
- (2014) Jeongho Han et al. ACTA MATERIALIA
- Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces
- (2014) D. Raabe et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Strain partitioning in ultra-fine grained medium-manganese transformation induced plasticity steel
- (2014) P.J. Gibbs et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Current opinion in medium manganese steel
- (2014) Y.-K. Lee et al. MATERIALS SCIENCE AND TECHNOLOGY
- Critical Assessment 7: Quenching and partitioning
- (2014) J. G. Speer et al. MATERIALS SCIENCE AND TECHNOLOGY
- Analysis of the Plasticity-Enhancing Mechanisms in 12 pctMn Austeno-ferritic Steel by In Situ Neutron Diffraction
- (2014) Sangwon Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effects of Annealing Treatment Prior to Cold Rolling on the Edge Cracking Phenomenon of Ferritic Lightweight Steel
- (2014) Seok Su Sohn et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A Novel Mo and Nb Microalloyed Medium Mn TRIP Steel with Maximal Ultimate Strength and Moderate Ductility
- (2014) Minghui Cai et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Annealing Temperature Dependence of the Tensile Behavior of 10 pct Mn Multi-phase TWIP-TRIP Steel
- (2014) Sangwon Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The influence of silicon and aluminum alloying on the lattice parameter and stacking fault energy of austenitic steel
- (2014) G.R. Lehnhoff et al. SCRIPTA MATERIALIA
- Interaction of aluminium with hydrogen in twinning-induced plasticity steel
- (2014) Eun Ju Song et al. SCRIPTA MATERIALIA
- Dissecting the Mechanism of Martensitic Transformation via Atomic-Scale Observations
- (2014) Xu-Sheng Yang et al. Scientific Reports
- Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: A pathway to ductile martensite
- (2013) D. Raabe et al. ACTA MATERIALIA
- Interaction between recrystallization and phase transformation during intercritical annealing in a cold-rolled dual-phase steel: A cellular automaton model
- (2013) Chengwu Zheng et al. ACTA MATERIALIA
- Constitutive Modeling of the Mechanical Properties of V-added Medium Manganese TRIP Steel
- (2013) Seawoong Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Effect of the Initial Microstructure on Recrystallization and Austenite Formation in a DP600 Steel
- (2013) M. Kulakov et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity Steel
- (2013) Bruno C. De Cooman et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties
- (2013) Hansoo Kim et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel
- (2012) Joo Hyun Ryu et al. ACTA MATERIALIA
- Growth of austenite from as-quenched martensite during intercritical annealing in an Fe–0.1C–3Mn–1.5Si alloy
- (2012) R. Wei et al. ACTA MATERIALIA
- The mechanism of enhanced resistance to the hydrogen delayed fracture in Al-added Fe–18Mn–0.6C twinning-induced plasticity steels
- (2012) Il-Jeong Park et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- α′-Martensite formation in deep-drawn Mn-based TWIP steel
- (2012) R. T. van Tol et al. JOURNAL OF MATERIALS SCIENCE
- Microstructure based prediction of strain hardening behavior of dual phase steels
- (2012) Sawitree Sodjit et al. MATERIALS & DESIGN
- Neutron diffraction analysis of stacking fault energy in Fe–18Mn–2Al–0.6C twinning-induced plasticity steels
- (2012) Mihyun Kang et al. MATERIALS LETTERS
- Deformation microstructures and strengthening mechanisms of an ultrafine grained duplex medium-Mn steel
- (2012) Chang Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Carbon Fraction on Stacking Fault Energy of Austenitic Stainless Steels
- (2012) Tae-Ho Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Grain size effect on strain hardening in twinning-induced plasticity steels
- (2012) I. Gutierrez-Urrutia et al. SCRIPTA MATERIALIA
- On the origin of dynamic strain aging in twinning-induced plasticity steels
- (2011) Seok-Jae Lee et al. ACTA MATERIALIA
- Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
- (2011) I. Gutierrez-Urrutia et al. ACTA MATERIALIA
- High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
- (2011) O. Bouaziz et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Phase equilibria and structural investigations in the system Al–Fe–Si
- (2011) Martin C.J. Marker et al. INTERMETALLICS
- Effects of Ti addition and reheating quenching on grain refinement and mechanical properties in low carbon medium manganese martensitic steel
- (2011) Y. Han et al. MATERIALS & DESIGN
- Effects of Al addition on deformation and fracture mechanisms in two high manganese TWIP steels
- (2011) Kwang-Geun Chin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Bainite and martensite start temperature calculated with exponential carbon dependence
- (2011) S M C van Bohemen MATERIALS SCIENCE AND TECHNOLOGY
- On the Effect of Manganese on Grain Size Stability and Hardenability in Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels
- (2011) Marion Calcagnotto et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel
- (2011) P. J. Gibbs et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Localized Deformation in Multiphase, Ultra-Fine-Grained 6 Pct Mn Transformation-Induced Plasticity Steel
- (2011) Seawoong Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of Al on the stacking fault energy of Fe–18Mn–0.6C twinning-induced plasticity
- (2011) Jinkyung Kim et al. SCRIPTA MATERIALIA
- Effects of Mn, Si and Cr addition on reverse transformation at 1073K from spheroidized cementite structure in Fe–0.6 mass% C alloy
- (2010) G. Miyamoto et al. ACTA MATERIALIA
- Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels
- (2010) Tae-Ho Lee et al. ACTA MATERIALIA
- Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate
- (2010) S. Curtze et al. ACTA MATERIALIA
- Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation
- (2010) O. Dmitrieva et al. ACTA MATERIALIA
- Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging
- (2010) Marion Calcagnotto et al. ACTA MATERIALIA
- Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
- (2010) Marion Calcagnotto et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of grain size and grain orientation on deformation twinning in a Fe–22wt.% Mn–0.6wt.% C TWIP steel
- (2010) I. Gutierrez-Urrutia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials
- (2010) O. Bouaziz et al. SCRIPTA MATERIALIA
- Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite
- (2010) Jie Shi et al. SCRIPTA MATERIALIA
- Austenite stabilization through manganese enrichment
- (2010) Emmanuel De Moor et al. SCRIPTA MATERIALIA
- Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe–18Mn–0.6C–1.5Al TWIP steel
- (2009) Singon Kang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stress and Strain Partitioning of Ferrite and Martensite during Deformation
- (2009) Z. H. Cong et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of Al on the Microstructural Evolution and Mechanical Behavior of Low-Carbon, Manganese Transformation-Induced-Plasticity Steel
- (2009) Dong-Woo Suh et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
- (2009) A. Saeed-Akbari et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Thermodynamics of martensitic transformations in the framework of the CALPHAD approach
- (2008) M. Palumbo CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Inverse Temperature Dependence of Toughness in an Ultrafine Grain-Structure Steel
- (2008) Y. Kimura et al. SCIENCE
- Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure
- (2008) R. Ueji et al. SCRIPTA MATERIALIA
- Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel
- (2007) A. Dumay et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of nitrogen on deformation-induced martensitic transformation in metastable austenitic Fe–18Cr–10Mn–N steels
- (2007) Tae-Ho Lee et al. SCRIPTA MATERIALIA
- Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels
- (2007) O. Bouaziz et al. SCRIPTA MATERIALIA
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started