标题
Current and emerging trends in polymeric 3D printed microfluidic devices
作者
关键词
-
出版物
Additive Manufacturing
Volume 55, Issue -, Pages 102867
出版商
Elsevier BV
发表日期
2022-05-06
DOI
10.1016/j.addma.2022.102867
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Microfluidics-enabled functional 3D printing
- (2022) H. Mea et al. Biomicrofluidics
- Review of 3D-Printed functionalized devices for chemical and biochemical analysis
- (2021) Cheng-Kuan Su ANALYTICA CHIMICA ACTA
- Fabrication and Applications of Microfluidic Devices: A Review
- (2021) Adelina-Gabriela Niculescu et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Portable Pathogen Diagnostics Using Microfluidic Cartridges Made from Continuous Liquid Interface Production Additive Manufacturing
- (2021) Jacob Berger et al. ANALYTICAL CHEMISTRY
- Exploiting limitations of fused deposition modeling to enhance mixing in 3D printed microfluidic devices
- (2021) Mojtaba Zeraatkar et al. RAPID PROTOTYPING JOURNAL
- Modular micropumps fabricated by 3D printed technologies for polymeric microfluidic device applications
- (2021) Y. Alvarez-Braña et al. SENSORS AND ACTUATORS B-CHEMICAL
- Spatially and optically tailored 3D printing for highly miniaturized and integrated microfluidics
- (2021) Jose L. Sanchez Noriega et al. Nature Communications
- 3D printing in biotechnology—An insight into miniaturized and microfluidic systems for applications from cell culture to bioanalytics
- (2021) Christopher Heuer et al. ENGINEERING IN LIFE SCIENCES
- 3D Printing Latex: A Route to Complex Geometries of High Molecular Weight Polymers
- (2020) Philip J. Scott et al. ACS Applied Materials & Interfaces
- Engineering considerations on extrusion-based bioprinting: interactions of material behaviour, mechanical forces and cells in the printing needle
- (2020) Julia Emmermacher et al. Biofabrication
- A Non-Cytotoxic Resin for Micro-Stereolithography for Cell Cultures of HUVECs
- (2020) Max J. Männel et al. Micromachines
- Applications of 3D Printing Technology to Address COVID-19–Related Supply Shortages
- (2020) Stephanie Ishack et al. AMERICAN JOURNAL OF MEDICINE
- Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
- (2020) Khoon S. Lim et al. CHEMICAL REVIEWS
- Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
- (2020) Claire Yu et al. CHEMICAL REVIEWS
- 3D printing: the potential technology widely used in medical fields
- (2020) Hongjian Li et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- 3D printing of hydrogels: Rational design strategies and emerging biomedical applications
- (2020) Jinhua Li et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- 100th Anniversary of Macromolecular Science Viewpoint: Macromolecular Materials for Additive Manufacturing
- (2020) Benjaporn Narupai et al. ACS Macro Letters
- Multi‐Material 3D and 4D Printing: A Survey
- (2020) Mohammad Rafiee et al. Advanced Science
- Direct ink writing of surface-modified flax elastomer composites
- (2020) Yizhou Jiang et al. COMPOSITES PART B-ENGINEERING
- Vanillin derivative as performing type I photoinitiator
- (2020) L. Breloy et al. EUROPEAN POLYMER JOURNAL
- A water soluble and highly reactive bisphosphonate functionalized thioxanthone-based photoinitiator
- (2020) Tugce Nur Eren et al. EUROPEAN POLYMER JOURNAL
- Evaluation of Aromatic Thiols as Photoinitiators
- (2020) Dillon M. Love et al. MACROMOLECULES
- 3D Printing of Cell Culture Devices: Assessment and Prevention of the Cytotoxicity of Photopolymers for Stereolithography
- (2020) Sebastian Kreß et al. Materials
- Recent Advances in Formulating and Processing Biomaterial Inks for Vat Polymerization‐Based 3D Printing
- (2020) Wanlu Li et al. Advanced Healthcare Materials
- Direct Ink Writing Based 4D Printing of Materials and Their Applications
- (2020) Xue Wan et al. Advanced Science
- Recent advances in multi-material additive manufacturing: methods and applications
- (2020) Daehoon Han et al. Current Opinion in Chemical Engineering
- Current status and future directions of fused filament fabrication
- (2020) Sunpreet Singh et al. Journal of Manufacturing Processes
- Fabrication and Functionalization of 3D Printed Polydimethylsiloxane‐Based Microfluidic Devices Obtained through Digital Light Processing
- (2020) Gustavo Gonzalez et al. Advanced Materials Technologies
- Biocompatible fluorinated wrinkled hydrogel films with antimicrobial activity
- (2020) Carmen M. González-Henríquez et al. Materials Science & Engineering C-Materials for Biological Applications
- Mono vs. Difunctional Coumarin as Photoinitiators in Photocomposite Synthesis and 3D Printing
- (2020) Mahmoud Rahal et al. Catalysts
- Materials Testing for the Development of Biocompatible Devices through Vat-Polymerization 3D Printing
- (2020) Gustavo González et al. Nanomaterials
- Surface Roughness Investigation of Poly-Jet 3D Printing
- (2020) Nectarios Vidakis et al. Mathematics
- Fused deposition modeling 3D printing of polyamide-based composites and its applications
- (2020) Xu Zhang et al. COMPOSITES COMMUNICATIONS
- Recent advances of 3D printing in analytical chemistry: Focus on microfluidic, separation, and extraction devices
- (2020) Lujun Wang et al. TRAC-TRENDS IN ANALYTICAL CHEMISTRY
- Direct Writing of Elastic Fibers with Optical, Electrical, and Microfluidic Functionality
- (2019) Markos Athanasiadis et al. Advanced Materials Technologies
- Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
- (2019) Carmen M. González-Henríquez et al. PROGRESS IN POLYMER SCIENCE
- 3D Printed Microfluidic Devices for Microchip Electrophoresis of Preterm Birth Biomarkers
- (2019) Michael J. Beauchamp et al. ANALYTICAL CHEMISTRY
- PolyJet 3D-Printed Enclosed Microfluidic Channels without Photocurable Supports
- (2019) Andre D. Castiaux et al. ANALYTICAL CHEMISTRY
- Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
- (2019) Longyu Li et al. CHEMISTRY-A EUROPEAN JOURNAL
- 3D-printed microfluidic device for the synthesis of silver and gold nanoparticles
- (2019) Lucas P. Bressan et al. MICROCHEMICAL JOURNAL
- Highly Reproducible Physiological Asymmetric Membrane with Freely Diffusing Embedded Proteins in a 3D‐Printed Microfluidic Setup
- (2019) Paul Heo et al. Small
- On the Impact of the Fabrication Method on the Performance of 3D Printed Mixers
- (2019) Zeraatkar et al. Micromachines
- Flexible, transparent, sub-100 µm microfluidic channels with fused deposition modeling 3D-printed thermoplastic polyurethane
- (2019) Matt D Nelson et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Fused deposition modelling: a review
- (2019) Swapnil Vyavahare et al. RAPID PROTOTYPING JOURNAL
- Additive Manufacturing: Exploring the Social Changes and Impacts
- (2019) Florinda Matos et al. Sustainability
- Functional 3D Printing for Microfluidic Chips
- (2019) Gregor Weisgrab et al. Advanced Materials Technologies
- A 3D-printed microfluidic-enabled hollow microneedle architecture for transdermal drug delivery
- (2019) Christopher Yeung et al. Biomicrofluidics
- Fabrication of integrated microfluidic devices by direct ink writing (DIW) 3D printing
- (2019) Terry Ching et al. SENSORS AND ACTUATORS B-CHEMICAL
- Novel Materials for 3D Printing by Photopolymerization
- (2018) Michael Layani et al. ADVANCED MATERIALS
- Desktop-Stereolithography 3D-Printing of a Poly(dimethylsiloxane)-Based Material with Sylgard-184 Properties
- (2018) Nirveek Bhattacharjee et al. ADVANCED MATERIALS
- Towards microbioprocess control: an inexpensive 3D printed microbioreactor with integrated online real-time glucose monitoring
- (2018) Peter Panjan et al. ANALYST
- Resolution improvement of 3D stereo-lithography through the direct laser trajectory programming: Application to microfluidic deterministic lateral displacement device
- (2018) Petra Juskova et al. ANALYTICA CHIMICA ACTA
- Fully 3D printed integrated reactor array for point-of-care molecular diagnostics
- (2018) Karteek Kadimisetty et al. BIOSENSORS & BIOELECTRONICS
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- 3D-printed Quake-style microvalves and micropumps
- (2018) Yuan-Sheng Lee et al. LAB ON A CHIP
- 3D printed microfluidics and microelectronics
- (2018) Ryan D. Sochol et al. MICROELECTRONIC ENGINEERING
- Inkjet 3D printed chip for capillary gel electrophoresis
- (2018) Rafał Walczak et al. SENSORS AND ACTUATORS B-CHEMICAL
- (Bio)Analytical chemistry enabled by 3D printing: Sensors and biosensors
- (2018) C. Lorena Manzanares Palenzuela et al. TRAC-TRENDS IN ANALYTICAL CHEMISTRY
- A visible light-curable yet visible wavelength-transparent resin for stereolithography 3D printing
- (2018) Hong Key Park et al. NPG Asia Materials
- 3D Micropatterned All-Flexible Microfluidic Platform for Microwave-Assisted Flow Organic Synthesis
- (2018) Deniz Hur et al. ChemPlusChem
- Highly Fluorinated Methacrylates for Optical 3D Printing of Microfluidic Devices
- (2018) Frederik Kotz et al. Micromachines
- 3D Printed Microfluidic Features Using Dose Control in X, Y, and Z Dimensions
- (2018) Michael Beauchamp et al. Micromachines
- A review of microfluidic approaches for investigating cancer extravasation during metastasis
- (2018) Yu-Heng Vivian Ma et al. Microsystems & Nanoengineering
- FDM 3D Printing of High-Pressure, Heat-Resistant, Transparent Microfluidic Devices
- (2018) Valentin Romanov et al. ANALYTICAL CHEMISTRY
- Three-dimensional printing of hybrid organic/inorganic composites with long persistence luminescence
- (2018) Rongping Ni et al. Optical Materials Express
- A 3D human lung-on-a-chip model for nanotoxicity testing
- (2018) Min Zhang et al. Toxicology Research
- A Review of 3D Printing Technology for Medical Applications
- (2018) Qian Yan et al. Engineering
- 3D printed microfluidic devices with immunoaffinity monoliths for extraction of preterm birth biomarkers
- (2018) Ellen K. Parker et al. ANALYTICAL AND BIOANALYTICAL CHEMISTRY
- Optimizing Process Parameters in Commercial Micro-Stereolithography for Forming Emulsions and Polymer Microparticles in Nonplanar Microfluidic Devices
- (2018) Max J. Männel et al. Advanced Materials Technologies
- Photopolymer resins for luminescent three-dimensional printing
- (2017) Fei Wang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Design and fabrication of porous biodegradable scaffolds: a strategy for tissue engineering
- (2017) Vahideh Raeisdasteh Hokmabad et al. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
- Stereolithographic hydrogel printing of 3D culture chips with biofunctionalized complex 3D perfusion networks
- (2017) Rujing Zhang et al. LAB ON A CHIP
- Biocompatible 3D printed polymers via fused deposition modelling direct C2C12 cellular phenotype in vitro
- (2017) Rowan P. Rimington et al. LAB ON A CHIP
- Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels
- (2017) Hua Gong et al. LAB ON A CHIP
- Point-of-care testing: applications of 3D printing
- (2017) Ho Nam Chan et al. LAB ON A CHIP
- Mimicking arterial thrombosis in a 3D-printed microfluidic in vitro vascular model based on computed tomography angiography data
- (2017) Pedro F. Costa et al. LAB ON A CHIP
- Facile Preparation of Photocurable Siloxane Composite for 3D Printing
- (2017) Jerome Palaganas et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Two-photon polymerization for biological applications
- (2017) Alexander K. Nguyen et al. Materials Today
- UV-Curable Aliphatic Silicone Acrylate Organic–Inorganic Hybrid Coatings with Antibacterial Activity
- (2017) Virginija Jankauskaitė et al. MOLECULES
- New UV LED curing approach for polyacrylamide and poly(N-isopropylacrylamide) hydrogels
- (2017) Nur Farizah Ayub et al. NEW JOURNAL OF CHEMISTRY
- Development of 3D printable formulations containing CNT with enhanced electrical properties
- (2017) Gustavo Gonzalez et al. POLYMER
- Inkjet and inkjet-based 3D printing: connecting fluid properties and printing performance
- (2017) Yang Guo et al. RAPID PROTOTYPING JOURNAL
- Simplified fabrication of integrated microfluidic devices using fused deposition modeling 3D printing
- (2017) Gabriel Gaal et al. SENSORS AND ACTUATORS B-CHEMICAL
- Biotinylated Photopolymers for 3D-Printed Unibody Lab-on-a-Chip Optical Platforms
- (2017) Caterina Credi et al. Small
- Comparison of 3D-Printed Poly-ɛ-Caprolactone Scaffolds Functionalized with Tricalcium Phosphate, Hydroxyapatite, Bio-Oss, or Decellularized Bone Matrix
- (2017) Ethan Nyberg et al. TISSUE ENGINEERING PART A
- 3D printing: Printing precision and application in food sector
- (2017) Zhenbin Liu et al. TRENDS IN FOOD SCIENCE & TECHNOLOGY
- Direct 3D Printing of Catalytically Active Structures
- (2017) J. Sebastián Manzano et al. ACS Catalysis
- Photoinitiators for two-photon polymerisation: effect of branching and viscosity on polymerisation thresholds
- (2017) Reece Whitby et al. RSC Advances
- Rapid Fabrication of Multilayer Microfluidic Devices Using the Liquid Crystal Display-Based Stereolithography 3D Printing System
- (2017) Zongjie Wang et al. 3D Printing and Additive Manufacturing
- Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
- (2016) Rouhollah D. Farahani et al. ADVANCED MATERIALS
- 3D-printed microfluidic devices: fabrication, advantages and limitations—a mini review
- (2016) Chengpeng Chen et al. Analytical Methods
- 3D-Printed Microfluidics
- (2016) Anthony K. Au et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- A comprehensive review on droplet-based bioprinting: Past, present and future
- (2016) Hemanth Gudapati et al. BIOMATERIALS
- Passive mixers in microfluidic systems: A review
- (2016) Chia-Yen Lee et al. CHEMICAL ENGINEERING JOURNAL
- 3D printing with polymers: Challenges among expanding options and opportunities
- (2016) Jeffrey W. Stansbury et al. DENTAL MATERIALS
- Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
- (2016) Simon Ford et al. JOURNAL OF CLEANER PRODUCTION
- A 3D printed microfluidic device for production of functionalized hydrogel microcapsules for culture and differentiation of human Neuronal Stem Cells (hNSC)
- (2016) Kevin Alessandri et al. LAB ON A CHIP
- 3D printed microfluidic circuitry via multijet-based additive manufacturing
- (2016) R. D. Sochol et al. LAB ON A CHIP
- High density 3D printed microfluidic valves, pumps, and multiplexers
- (2016) Hua Gong et al. LAB ON A CHIP
- 3D printed microfluidic devices: enablers and barriers
- (2016) Sidra Waheed et al. LAB ON A CHIP
- The upcoming 3D-printing revolution in microfluidics
- (2016) Nirveek Bhattacharjee et al. LAB ON A CHIP
- A Photoinitiation System for Conventional and Controlled Radical Polymerization at Visible and NIR Wavelengths
- (2016) Nathaniel Corrigan et al. MACROMOLECULES
- On-demand, parallel droplet merging method with non-contact droplet pairing in droplet-based microfluidics
- (2016) Sanghyun Lee et al. Microfluidics and Nanofluidics
- Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials
- (2016) Andreas Oesterreicher et al. Polymer Chemistry
- Dihydroxyanthraquinone derivatives: natural dyes as blue-light-sensitive versatile photoinitiators of photopolymerization
- (2016) Jing Zhang et al. Polymer Chemistry
- Highly conductive and hydrated PEG-based hydrogels for the potential application of a tissue engineering scaffold
- (2016) Yong Seok Kim et al. REACTIVE & FUNCTIONAL POLYMERS
- Towards Single-Step Biofabrication of Organs on a Chip via 3D Printing
- (2016) Stephanie Knowlton et al. TRENDS IN BIOTECHNOLOGY
- High-performance 3D printing of hydrogels by water-dispersible photoinitiator nanoparticles
- (2016) A. A. Pawar et al. Science Advances
- 3D Printed Multimaterial Microfluidic Valve
- (2016) Steven J. Keating et al. PLoS One
- 3D printed microfluidic devices with integrated valves
- (2015) Chad I. Rogers et al. Biomicrofluidics
- Advantages and challenges of microfluidic cell culture in polydimethylsiloxane devices
- (2015) Skarphedinn Halldorsson et al. BIOSENSORS & BIOELECTRONICS
- Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery
- (2015) Jin-Feng Xing et al. CHEMICAL SOCIETY REVIEWS
- Automated Lab-on-a-Chip Technology for Fish Embryo Toxicity Tests Performed under Continuous Microperfusion (μFET)
- (2015) Feng Zhu et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- Direct digital manufacturing: definition, evolution, and sustainability implications
- (2015) Danfang Chen et al. JOURNAL OF CLEANER PRODUCTION
- 3D printed microfluidics for biological applications
- (2015) Chee Meng Benjamin Ho et al. LAB ON A CHIP
- Surface Modification of Poly(dimethylsiloxane) Using Ionic Complementary Peptides to Minimize Nonspecific Protein Adsorption
- (2015) Xiaoling Yu et al. LANGMUIR
- Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structure
- (2015) M. Sugavaneswaran et al. MATERIALS & DESIGN
- Synthesis and characterization of silver nanoparticle nanocomposite thin films with thermally induced surface morphology changes
- (2015) Ernandes T. Tenório-Neto et al. MATERIALS LETTERS
- Ketoprofen as a photoinitiator for anionic polymerization
- (2015) Yu-Hsuan Wang et al. PHOTOCHEMICAL & PHOTOBIOLOGICAL SCIENCES
- Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
- (2015) S. Takenaga et al. PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
- Emerging Technologies for Next-Generation Point-of-Care Testing
- (2015) Sandeep Kumar Vashist et al. TRENDS IN BIOTECHNOLOGY
- Controllable Printing Droplets for High-Resolution Patterns
- (2014) Minxuan Kuang et al. ADVANCED MATERIALS
- Cost-Effective Three-Dimensional Printing of Visibly Transparent Microchips within Minutes
- (2014) Aliaa I. Shallan et al. ANALYTICAL CHEMISTRY
- Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
- (2014) Bethany C. Gross et al. ANALYTICAL CHEMISTRY
- A global sustainability perspective on 3D printing technologies
- (2014) Malte Gebler et al. ENERGY POLICY
- Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering
- (2014) I D Johnston et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices
- (2014) Anthony K. Au et al. LAB ON A CHIP
- Photochemistry and Radical Chemistry under Low Intensity Visible Light Sources: Application to Photopolymerization Reactions
- (2014) Jacques Lalevée et al. MOLECULES
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- Novel polymeric photoinitiators with side-chain benzophenone: Facile synthesis and photopolymerization properties without coinitiator
- (2014) Kemin Wang et al. PROGRESS IN ORGANIC COATINGS
- 3D Printing Gets a Boost and Opportunities with Polymer Materials
- (2014) Manfred Hofmann ACS Macro Letters
- Materials for Microfluidic Chip Fabrication
- (2013) Kangning Ren et al. ACCOUNTS OF CHEMICAL RESEARCH
- i3DP, a robust 3D printing approach enabling genetic post-printing surface modification
- (2013) Xiaolong Wang et al. CHEMICAL COMMUNICATIONS
- Photopolymer Materials and Processes for Advanced Technologies
- (2013) James V. Crivello et al. CHEMISTRY OF MATERIALS
- Microfluidic cell culture
- (2013) Matthias Mehling et al. CURRENT OPINION IN BIOTECHNOLOGY
- Omnidirectional Printing of 3D Microvascular Networks
- (2011) Willie Wu et al. ADVANCED MATERIALS
- Microfluidic Mixing: A Review
- (2011) Chia-Yen Lee et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Efficiency of 2,2-dimethoxy-2-phenylacetophenone for the photopolymerization of methacrylate monomers in thick sections
- (2011) Veronica Mucci et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Plasma functionalized PDMS microfluidic chips: towards point-of-care capture of circulating tumor cells
- (2011) Mahaveer D. Kurkuri et al. JOURNAL OF MATERIALS CHEMISTRY
- A fully biobased epoxy resin from vegetable oils: From the synthesis of the precursors by thiol-ene reaction to the study of the final material
- (2011) M. Stemmelen et al. JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY
- Integrated Microfluidic Device for Automated Single Cell Analysis Using Electrophoretic Separation and Electrospray Ionization Mass Spectrometry
- (2010) J. Scott Mellors et al. ANALYTICAL CHEMISTRY
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- Non-extractable photoinitiators based on thiol-functionalized benzophenones and thioxanthones
- (2010) Hironori Matsushima et al. EUROPEAN POLYMER JOURNAL
- Photoinitiated Polymerization: Advances, Challenges, and Opportunities
- (2010) Yusuf Yagci et al. MACROMOLECULES
- Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility
- (2009) Benjamin D. Fairbanks et al. BIOMATERIALS
- Inertial microfluidics
- (2009) Dino Di Carlo LAB ON A CHIP
- Flow-through functionalized PDMS microfluidic channels with dextran derivative for ELISAs
- (2009) Ling Yu et al. LAB ON A CHIP
- A State-of-the-Art Review of Mixing in Microfluidic Mixers
- (2008) Elmabruk A. Mansur et al. CHINESE JOURNAL OF CHEMICAL ENGINEERING
- Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
- (2008) Brian Derby JOURNAL OF MATERIALS CHEMISTRY
Become a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get StartedAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started