标题
Microfluidics-enabled functional 3D printing
作者
关键词
-
出版物
Biomicrofluidics
Volume 16, Issue 2, Pages 021501
出版商
AIP Publishing
发表日期
2022-03-04
DOI
10.1063/5.0083673
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Management of validation of HPLC method for determination of acetylsalicylic acid impurities in a new pharmaceutical product
- (2022) Małgorzata Kowalska et al. Scientific Reports
- Anomalous collapses of Nares Strait ice arches leads to enhanced export of Arctic sea ice
- (2021) G. W. K. Moore et al. Nature Communications
- Continuous Embedded Droplet Printing in Yield‐Stress Fluids for Pharmaceutical Drug Particle Synthesis
- (2021) Arif Z. Nelson et al. Advanced Materials Technologies
- Fabrication of Microfluidic Devices for Emulsion Formation by Microstereolithography
- (2021) Max J. Männel et al. MOLECULES
- High-Throughput and Continuous Chaotic Bioprinting of Spatially Controlled Bacterial Microcosms
- (2021) Carlos Fernando Ceballos-González et al. ACS Biomaterials-Science & Engineering
- 3D jet writing of mechanically actuated tandem scaffolds
- (2021) Seongjun Moon et al. Science Advances
- Magnetohydrodynamic liquid metal droplet jetting of highly conductive electronic traces
- (2021) Manoj Meda et al. Flexible and Printed Electronics
- Modular Synthetic Tissues from 3D‐Printed Building Blocks
- (2021) Alessandro Alcinesio et al. ADVANCED FUNCTIONAL MATERIALS
- Digital Light Processing Based Bioprinting with Composable Gradients
- (2021) Mian Wang et al. ADVANCED MATERIALS
- 3D printing of highly reactive silicones using inkjet type droplet ejection and free space droplet merging and reaction
- (2021) Monika Śliwiak et al. Additive Manufacturing
- A microfluidic printhead with integrated hybrid mixing by sequential injection for multimaterial 3D printing
- (2021) Islam Hassan et al. Additive Manufacturing
- Embedded droplet printing in yield-stress fluids
- (2020) Arif Z. Nelson et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- A core-shell multi-drug platform to improve gastrointestinal tract microbial health using 3D printing
- (2020) Li-Fang Zhu et al. Biofabrication
- Additive manufacturing of two-phase lightweight, stiff and high damping carbon fiber reinforced polymer microlattices
- (2020) Zhenpeng Xu et al. Additive Manufacturing
- A Review of 3D Printing Technologies for Soft Polymer Materials
- (2020) Lu‐Yu Zhou et al. ADVANCED FUNCTIONAL MATERIALS
- Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
- (2020) Claire Yu et al. CHEMICAL REVIEWS
- 3D printing of hydrogels: Rational design strategies and emerging biomedical applications
- (2020) Jinhua Li et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Multi-responsive hydrogel structures from patterned droplet networks
- (2020) Florence G. Downs et al. Nature Chemistry
- Using chaotic advection for facile high-throughput fabrication of ordered multilayer micro- and nanostructures: continuous chaotic printing
- (2020) Carolina Chávez-Madero et al. Biofabrication
- Controlled packing and single-droplet resolution of 3D-printed functional synthetic tissues
- (2020) Alessandro Alcinesio et al. Nature Communications
- Programmable Porous Polymers via Direct Bubble Writing with Surfactant-Free Inks
- (2020) Dahlia N. Amato et al. ACS Applied Materials & Interfaces
- Lipid‐Bilayer‐Supported 3D Printing of Human Cerebral Cortex Cells Reveals Developmental Interactions
- (2020) Linna Zhou et al. ADVANCED MATERIALS
- Guiding Lights: Tissue Bioprinting Using Photoactivated Materials
- (2020) Mihyun Lee et al. CHEMICAL REVIEWS
- On-demand modulation of 3D-printed elastomers using programmable droplet inclusions
- (2020) Hing Jii Mea et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Microfluidics for Medical Additive Manufacturing
- (2020) Jie Wang et al. Engineering
- Multi-material additive manufacturing of functionally graded carbide ceramics via active, in-line mixing
- (2020) Joshua S. Pelz et al. Additive Manufacturing
- Bioengineered Gastrointestinal Tissues with Fibroblast‐Induced Shapes
- (2020) Linna Zhou et al. ADVANCED FUNCTIONAL MATERIALS
- Microfluidic Synthesis of Semiconductor Materials: Toward Accelerated Materials Development in Flow
- (2020) Zachary S. Campbell et al. PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
- Multimaterial 3D laser microprinting using an integrated microfluidic system
- (2019) Frederik Mayer et al. Science Advances
- A novel approach for tailored medicines: Direct writing of Janus fibers
- (2019) Zhi-Cheng Yao et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Multi-metal electrohydrodynamic redox 3D printing at the submicron scale
- (2019) Alain Reiser et al. Nature Communications
- Active Mixing of Disparate Inks for Multimaterial 3D Printing
- (2019) Jason M. Ortega et al. Advanced Materials Technologies
- Engineering On‐Demand Magnetic Core‐Shell Composite Wound Dressing Matrices via Electrohydrodynamic Micro Scale Printing
- (2019) Baolin Wang et al. ADVANCED ENGINEERING MATERIALS
- Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control
- (2019) Daehoon Han et al. Additive Manufacturing
- Direct Patterning of Highly Conductive PEDOT:PSS/Ionic Liquid Hydrogel via Microreactive Inkjet Printing
- (2019) Mei Ying Teo et al. ACS Applied Materials & Interfaces
- Architected Polymer Foams via Direct Bubble Writing
- (2019) Claas Willem Visser et al. ADVANCED MATERIALS
- 3D electrohydrodynamic printing of highly aligned dual-core graphene composite matrices
- (2019) Baolin Wang et al. CARBON
- Deformation-Based Droplet Separation in Microfluidics
- (2019) Yunju Chang et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Voxelated soft matter via multimaterial multinozzle 3D printing
- (2019) Mark A. Skylar-Scott et al. NATURE
- 3D Printing of Compositional Gradients Using the Microfluidic Circuit Analogy
- (2019) Du T. Nguyen et al. Advanced Materials Technologies
- Architected Lattices with High Stiffness and Toughness via Multicore-Shell 3D Printing
- (2018) Jochen Mueller et al. ADVANCED MATERIALS
- Microfluidics-Enabled Multimaterial Maskless Stereolithographic Bioprinting
- (2018) Amir K. Miri et al. ADVANCED MATERIALS
- Patterning of Structurally Anisotropic Composite Hydrogel Sheets
- (2018) Elisabeth Prince et al. BIOMACROMOLECULES
- Multi-material Additive Manufacturing of Metamaterials with Giant, Tailorable Negative Poisson’s Ratios
- (2018) Da Chen et al. Scientific Reports
- Chaotic printing: using chaos to fabricate densely packed micro- and nanostructures at high resolution and speed
- (2018) Grissel Trujillo-de Santiago et al. Materials Horizons
- In-air microfluidics enables rapid fabrication of emulsions, suspensions, and 3D modular (bio)materials
- (2018) Claas Willem Visser et al. Science Advances
- Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues
- (2018) Qingmeng Pi et al. ADVANCED MATERIALS
- Reactive inkjet printing of polyethylene glycol and isocyanate based inks to create porous polyurethane structures
- (2018) Fabian Schuster et al. JOURNAL OF APPLIED POLYMER SCIENCE
- 3D Printed Microfluidic Mixers—A Comparative Study on Mixing Unit Performances
- (2018) Anton Enders et al. Small
- Multimaterial Microfluidic 3D Printing of Textured Composites with Liquid Inclusions
- (2018) Xiying Li et al. Advanced Science
- Direct fabrication of metal tubes with high-quality inner surfaces via droplet deposition over soluble cores
- (2018) Hao Yi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fabrication of patterned three-dimensional micron scaled core-sheath architectures for drug patches
- (2018) Zhi-Cheng Yao et al. Materials Science & Engineering C-Materials for Biological Applications
- Drop-on-demand electromagnetic printing of metallic droplets
- (2017) Zhiwei Luo et al. MATERIALS LETTERS
- 3D reactive inkjet printing of polydimethylsiloxane
- (2017) Craig Sturgess et al. Journal of Materials Chemistry C
- Suspension 3D Printing of Liquid Metal into Self-Healing Hydrogel
- (2017) Yongze Yu et al. Advanced Materials Technologies
- Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
- (2017) Michiru Nishita et al. Scientific Reports
- Rapid Continuous Multimaterial Extrusion Bioprinting
- (2016) Wanjun Liu et al. ADVANCED MATERIALS
- Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
- (2016) Yu Shrike Zhang et al. BIOMATERIALS
- Impact-driven ejection of micro metal droplets on-demand
- (2016) Jun Luo et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- High-Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks
- (2015) Byeong Wan An et al. ADVANCED MATERIALS
- Capacitive Soft Strain Sensors via Multicore-Shell Fiber Printing
- (2015) Andreas Frutiger et al. ADVANCED MATERIALS
- Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink
- (2015) Cristina Colosi et al. ADVANCED MATERIALS
- Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
- (2015) James O. Hardin et al. ADVANCED MATERIALS
- Active mixing of complex fluids at the microscale
- (2015) Thomas J. Ober et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
- (2015) E.O. Olakanmi et al. PROGRESS IN MATERIALS SCIENCE
- Continuous liquid interface production of 3D objects
- (2015) J. R. Tumbleston et al. SCIENCE
- Optimization of fused deposition modeling process parameters: a review of current research and future prospects
- (2015) Omar A. Mohamed et al. Advances in Manufacturing
- Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
- (2014) Joseph T. Muth et al. ADVANCED MATERIALS
- Microfluidic spinning of micro- and nano-scale fibers for tissue engineering
- (2014) Yesl Jun et al. LAB ON A CHIP
- Functional Polymer Sheet Patterning Using Microfluidics
- (2014) Minggan Li et al. LANGMUIR
- Continuous and Scalable Production of Well-Controlled Noble-Metal Nanocrystals in Milliliter-Sized Droplet Reactors
- (2014) Lei Zhang et al. NANO LETTERS
- 25th Anniversary Article: Engineering Hydrogels for Biofabrication
- (2013) Jos Malda et al. ADVANCED MATERIALS
- Analytical detection techniques for droplet microfluidics—A review
- (2013) Ying Zhu et al. ANALYTICA CHIMICA ACTA
- Preparation of stripe-patterned heterogeneous hydrogel sheets using microfluidic devices for high-density coculture of hepatocytes and fibroblasts
- (2013) Aoi Kobayashi et al. JOURNAL OF BIOSCIENCE AND BIOENGINEERING
- Particle separation and sorting in microfluidic devices: a review
- (2013) P. Sajeesh et al. Microfluidics and Nanofluidics
- A Tissue-Like Printed Material
- (2013) G. Villar et al. SCIENCE
- Two-Phase Microfluidic Droplet Flows of Ionic Liquids for the Synthesis of Gold and Silver Nanoparticles
- (2012) Laura L. Lazarus et al. ACS Applied Materials & Interfaces
- Photocurable Liquid Core-Fugitive Shell Printing of Optical Waveguides
- (2011) David J. Lorang et al. ADVANCED MATERIALS
- Microfluidic Mixing: A Review
- (2011) Chia-Yen Lee et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Reactions in double emulsions by flow-controlled coalescence of encapsulated drops
- (2011) Haosheng Chen et al. LAB ON A CHIP
- Formation of droplet networks that function in aqueous environments
- (2011) Gabriel Villar et al. Nature Nanotechnology
- Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
- (2010) Brian Derby Annual Review of Materials Research
- Synthesis of micro and nanostructures in microfluidic systems
- (2010) Samuel Marre et al. CHEMICAL SOCIETY REVIEWS
- Recent developments in PDMS surface modification for microfluidic devices
- (2009) Jinwen Zhou et al. ELECTROPHORESIS
- Research on accurate droplet generation for micro-droplet deposition manufacture
- (2009) Xiao-Shan Jiang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started