标题
Surface integrity in metal machining - Part II: Functional performance
作者
关键词
Surface integrity, Machining, Service life, Fatigue endurance, Corrosion resistance, Wear resistance
出版物
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 164, Issue -, Pages 103718
出版商
Elsevier BV
发表日期
2021-03-18
DOI
10.1016/j.ijmachtools.2021.103718
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Effect of surface treatment and crystal orientation on hot corrosion of a Ni-based single-crystal superalloy
- (2020) X. Montero et al. CORROSION SCIENCE
- Development of a novel system for in-situ repair of aeroengine airfoil via pulsed laser ablation
- (2020) D. Cha et al. JOURNAL OF MANUFACTURING SYSTEMS
- Dual-Processing by Abrasive Waterjet Machining – A Method for Machining and Surface Modification of Nickel-Based Superalloy
- (2020) Zhirong Liao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Solving Recent Challenges for Wrought Ni-Base Superalloys
- (2020) M. C. Hardy et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and corrosion resistance of a Mg2Sn-dispersed Mg alloy subjected to pulsed electron beam treatment
- (2020) Daseul Lee et al. Journal of Magnesium and Alloys
- A digital approach to automatically assess the machining-induced microstructural surface integrity
- (2020) Andrea la Monaca et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of laser polishing on surface roughness and microstructural properties of the remelted surface boundary layer of tool steel H11
- (2020) A. Temmler et al. MATERIALS & DESIGN
- Enhancing anti-wear and anti-corrosion performance of cold spraying aluminum coating by high current pulsed electron beam irradiation
- (2020) Feng Guo et al. VACUUM
- Investigation of surface integrity in laser-assisted machining of nickel based superalloy
- (2020) Dongdong Xu et al. MATERIALS & DESIGN
- Surface integrity in metal machining - Part I: Fundamentals of surface characteristics and formation mechanisms
- (2020) Zhirong Liao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Fabrication of superhydrophobic metallic surface on the electrical discharge machining basement
- (2019) Han Wang et al. APPLIED SURFACE SCIENCE
- Effect of surface integrity induced by machining on high cycle fatigue life of 7075-T6 aluminum alloy
- (2019) Giovanna Rotella Journal of Manufacturing Processes
- Fatigue life prediction of carbon steel with machined surface layer under low-cycle fatigue
- (2019) Shota Hasunuma et al. INTERNATIONAL JOURNAL OF FATIGUE
- The effect of machining and induced surface deformation on the fatigue performance of a high strength metastable β titanium alloy
- (2019) A. Cox et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue crack growth in a laser shock peened residual stress field
- (2019) M. Pavan et al. INTERNATIONAL JOURNAL OF FATIGUE
- Geometrical modelling of pulsed laser ablation of high performance metallic alloys
- (2019) D. Cha et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Comparison between the improvements made to the fatigue strength of stainless steel by cavitation peening, water jet peening, shot peening and laser peening
- (2019) Hitoshi Soyama JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fatigue Behavior of Non-Optimized Laser-Cut Medical Grade Ti-6Al-4V-ELI Sheets and the Effects of Mechanical Post-Processing
- (2019) André Reck et al. Metals
- Laser polishing of additive manufactured tool steel components using pulsed or continuous-wave lasers
- (2019) K. C. Yung et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and properties of TiO2 nanotube coatings on bone plate surface fabrication by anodic oxidation
- (2019) Shuxu Wu et al. SURFACE & COATINGS TECHNOLOGY
- Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case
- (2019) Zhirong Liao et al. ACTA MATERIALIA
- Effect of wire electric discharge machining (EDM) parameters on fatigue life of Ti-6Al-4V alloy
- (2019) A. Pramanik et al. INTERNATIONAL JOURNAL OF FATIGUE
- Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 718
- (2019) Yang Hua et al. SURFACE & COATINGS TECHNOLOGY
- Overview of fatigue damage evaluation rule for railway axles in Japan and fatigue property of railway axle made of medium carbon steel
- (2019) T. Makino et al. INTERNATIONAL JOURNAL OF FATIGUE
- High cycle fatigue behavior of hard turned 300 M ultra-high strength steel
- (2019) J. Ajaja et al. INTERNATIONAL JOURNAL OF FATIGUE
- Surface hardening of metals at room temperature by nanoparticle-laden cavitating waterjets
- (2019) Xingliang He et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A review of fretting study on nuclear power equipment
- (2019) Zhen-bing Cai et al. TRIBOLOGY INTERNATIONAL
- Electro Discharge Machining - A Suitable Fabrication Process for High-Pressure/High-Temperature Equipment
- (2018) Benjamin Hertweck et al. CHEMICAL ENGINEERING & TECHNOLOGY
- Effect of surface abrasion on pitting corrosion of Al-Li alloy
- (2018) Jianhua Liu et al. CORROSION SCIENCE
- Atmospheric Chloride-Induced Stress Corrosion Cracking of Laser Engraved Type 316L Stainless Steel
- (2018) Benjamin Krawczyk et al. CORROSION SCIENCE
- Investigation on Machining Induced Surface and Subsurface Modifications on the Stress Corrosion Crack Growth Behaviour of Super Duplex Stainless Steel
- (2018) J. Rajaguru et al. CORROSION SCIENCE
- Stress corrosion crack initiation in machined type 316L austenitic stainless steel in simulated pressurized water reactor primary water
- (2018) Litao Chang et al. CORROSION SCIENCE
- Effect of electrical discharge machining on corrosion and corrosion fatigue behavior of aluminum alloys
- (2018) Saravanan R. Arunachalam et al. INTERNATIONAL JOURNAL OF FATIGUE
- A probabilistic approach to study the effect of machined surface states on HCF behavior of a AA7050 alloy
- (2018) Foued Abroug et al. INTERNATIONAL JOURNAL OF FATIGUE
- The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes
- (2018) Zhengkai Xu et al. INTERNATIONAL JOURNAL OF FATIGUE
- A review on process capabilities of electrochemical micromachining and its hybrid variants
- (2018) Krishna Kumar Saxena et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Recent advances in the development of aerospace materials
- (2018) Xuesong Zhang et al. PROGRESS IN AEROSPACE SCIENCES
- Electropolishing of Al and Al alloys in AlCl 3 /trimethylamine hydrochloride ionic liquid
- (2018) Yuanyuan Hou et al. SURFACE & COATINGS TECHNOLOGY
- Electrical discharge coating using WS 2 and Cu powder mixture for solid lubrication and enhanced tribological performance
- (2018) R. Tyagi et al. TRIBOLOGY INTERNATIONAL
- Effect of Turning and Surface Polishing Treatments on Surface Integrity and Fatigue Performance of Nickel-Based Alloy GH4169
- (2018) Daoxia Wu et al. Metals
- Defect-free TiC/Si multi-layer electrical discharge coatings
- (2018) J.W. Murray et al. MATERIALS & DESIGN
- Life time extension of turbine rotating components under risk constraints: a state-of-the-art review and case study
- (2018) Xuefei Guan et al. INTERNATIONAL JOURNAL OF FATIGUE
- Corrosion Behavior of Wire Electrical Discharge Machined Surfaces of P91 Steel
- (2018) S. Bhattacharya et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- An investigation into the effect of surface integrity on the fatigue failure of AISI 4340 steel in different drilling strategies
- (2018) Amir Rasti et al. ENGINEERING FAILURE ANALYSIS
- Characterizing the effects of in-situ sensitization on stress corrosion cracking of austenitic steels in supercritical water
- (2018) Kai Chen et al. SCRIPTA MATERIALIA
- On modelling of laser assisted machining: Forward and inverse problems for heat placement control
- (2018) Zhendong Shang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of electropolishing on general corrosion of Alloy 690TT tubes in simulated primary coolant of pressurized water reactors
- (2018) Hee-Sang Shim et al. APPLIED SURFACE SCIENCE
- Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water
- (2018) Litao Chang et al. ACTA MATERIALIA
- Effects of dielectric fluids on surface integrity for the recast layer in high speed EDM drilling of nickel alloy
- (2018) Chaojiang Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Pitting corrosion failure analysis of a wet gas pipeline
- (2017) Hamed Mansoori et al. ENGINEERING FAILURE ANALYSIS
- Influence of surface condition due to laser beam cutting on the fatigue behavior of metastable austenitic stainless steel AISI 304
- (2017) D.F. Pessoa et al. ENGINEERING FRACTURE MECHANICS
- Surface integrity after post processing of EDM processed Inconel 718 shaft
- (2017) Jonas Holmberg et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improvement of surface integrity of Nimonic C 263 super alloy produced by WEDM through various post-processing techniques
- (2017) Amitava Mandal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of rake angle on surface integrity and fatigue performance of machined surfaces
- (2017) Youngsik Choi INTERNATIONAL JOURNAL OF FATIGUE
- The effect of trepanning speed of laser drilled acute angled cooling holes on the high temperature low cycle corrosion fatigue performance of CMSX-4 at 850 °C
- (2017) N. Morar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Monitoring and control of the electrochemical machining process under the conditions of a vibrating tool electrode
- (2017) Tomasz Paczkowski et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Formation mechanism of electrical discharge TiC-Fe composite coatings
- (2017) J.W. Murray et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser polishing of additive manufactured Ti alloys
- (2017) C.P. Ma et al. OPTICS AND LASERS IN ENGINEERING
- Surface integrity in electrochemical machining processes: An analysis on material modifications occurring during electrochemical machining
- (2017) Fritz Klocke et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Surface modification of β-phase Ti implant by hydroaxyapatite mixed electric discharge machining to enhance the corrosion resistance and in-vitro bioactivity
- (2017) Chander Prakash et al. SURFACE & COATINGS TECHNOLOGY
- Corrosion performance of medical grade NiTi after laser processing
- (2017) A. Michael et al. SURFACE & COATINGS TECHNOLOGY
- Wear resistance enhancement of titanium alloy (Ti–6Al–4V) by ball burnishing process
- (2017) Goutam Devaraya Revankar et al. Journal of Materials Research and Technology-JMR&T
- Influence of tribology on global energy consumption, costs and emissions
- (2017) Kenneth Holmberg et al. Friction
- Effect of machining-induced surface residual stress on initiation of stress corrosion cracking in 316 austenitic stainless steel
- (2016) Wenqian Zhang et al. CORROSION SCIENCE
- Chemical milling effect on the low cycle fatigue properties of cast Ti–6Al–2Sn–4Zr–2Mo alloy
- (2016) Birhan Sefer et al. INTERNATIONAL JOURNAL OF FATIGUE
- The probability of HCF – Surface and sub-surface models
- (2016) Salar Sadek et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of the WEDM process on the fatigue behavior of Inconel® 718
- (2016) Izaro Ayesta et al. INTERNATIONAL JOURNAL OF FATIGUE
- State-of-the-art in surface integrity in machining of nickel-based super alloys
- (2016) A. Thakur et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Optimising laser cut-edge durability for steel structures in high stress applications
- (2016) D.J. Thomas JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening
- (2016) M. Lieblich et al. Journal of the Mechanical Behavior of Biomedical Materials
- Influence of shot peening on high-temperature corrosion and corrosion-fatigue of nickel based superalloy 720Li
- (2016) G. J. Gibson et al. MATERIALS AT HIGH TEMPERATURES
- Plastic deformation induced nano-scale twins in Ti-6Al-4V machined surface with high speed machining
- (2016) Qingqing Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Analysis of surface quality of multi-film cooling holes in nickel-based single crystal superalloy
- (2016) Z. Wen et al. MATERIALS SCIENCE AND TECHNOLOGY
- Formation mechanisms of white layers induced by hard turning of AISI 52100 steel
- (2015) S.B. Hosseini et al. ACTA MATERIALIA
- Producing cobalt–graphene composite coating by pulse electrodeposition with excellent wear and corrosion resistance
- (2015) Cansen Liu et al. APPLIED SURFACE SCIENCE
- High performance cutting of advanced aerospace alloys and composite materials
- (2015) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Effect of electropolishing on corrosion of Alloy 600 in high temperature water
- (2015) Yaolei Han et al. CORROSION SCIENCE
- Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review
- (2015) J. Soltis CORROSION SCIENCE
- Improving the oxidation resistance of 316L stainless steel in simulated pressurized water reactor primary water by electropolishing treatment
- (2015) Guangdong Han et al. JOURNAL OF NUCLEAR MATERIALS
- Friction and wear behaviors of TiCN coating based on electrical discharge coating
- (2015) Zhao-yubo ZENG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Subsurface characterisation of wear on mechanically polished and electro-polished biomedical grade CoCrMo
- (2015) P Zeng et al. WEAR
- Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes
- (2014) Fritz Klocke et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling
- (2014) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Degradation of titanium 6Al–4V fatigue strength due to electrical discharge machining
- (2014) Todd M. Mower INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure and residual stresses of laser remelted surfaces of a hot work tool steel
- (2014) Johannes Preußner et al. International Journal of Materials Research
- Characterization of Plastic Deformation Induced by Shot-Peening in a Ni-Base Superalloy
- (2014) O. M. D. M. Messé et al. JOM
- Influence of Surface Anomalies Following Hole Making Operations on the Fatigue Performance for a Nickel-Based Superalloy
- (2014) C. Herbert et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Nanostructures in austenitic steel after EDM and pulsed electron beam irradiation
- (2014) J.W. Murray et al. SURFACE & COATINGS TECHNOLOGY
- Multitechnique characterization of CPTi surfaces after electro discharge machining (EDM)
- (2013) Spiros Zinelis et al. Clinical Oral Investigations
- Ultrafine-grained copper produced by machining and its unusual electrochemical corrosion resistance in acidic chloride pickling solutions
- (2013) Wenjun Deng et al. CORROSION SCIENCE
- Localized corrosion evaluation of the ASTM F139 stainless steel marked by laser using scanning vibrating electrode technique, X-ray photoelectron spectroscopy and Mott–Schottky techniques
- (2013) Eurico F. Pieretti et al. ELECTROCHIMICA ACTA
- Improvement of surface microhardness and wear resistance of WC/Co hard alloy by high current pulsed electron beam irradiation
- (2013) Shengzhi Hao et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- A finite element analysis of thermal relaxation of residual stress in laser shock processing Ni-based alloy GH4169
- (2013) X.D. Ren et al. MATERIALS & DESIGN
- Effect of residual stress induced by pulsed-laser irradiation on initiation of chloride stress corrosion cracking in stainless steel
- (2013) Shuzo Eto et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Electrochemical machining of super-hydrophobic Al surfaces and effect of processing parameters on wettability
- (2012) Jin-long Song et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Effect of chemical milling on low-cycle fatigue behavior of an Al–Mg–Si alloy
- (2012) Ashley D. Spear et al. CORROSION SCIENCE
- Effect of electro discharge machining (EDM) on the AISI316L SS white layer microstructure and corrosion resistance
- (2012) Habib Sidhom et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Residual stress and fatigue life in laser shock peened open hole samples
- (2012) Servando D. Cuellar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Evaluation of residual stress relaxation and its effect on fatigue strength of AISI 316L stainless steel ground surfaces: Experimental and numerical approaches
- (2012) Adnen Laamouri et al. INTERNATIONAL JOURNAL OF FATIGUE
- An evaluation of the evolution of workpiece surface integrity in hole making operations for a nickel-based superalloy
- (2012) C.R.J. Herbert et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Repair of EDM induced surface cracks by pulsed electron beam irradiation
- (2012) J.W. Murray et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Corrosion and corrosion-fatigue behavior of cp-Ti and Ti–6Al–4V laser-marked biomaterials
- (2012) F. J. Gil et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Corrosion Behavior of Stainless Steels in Simulated PWR Primary Water—Effect of Chromium Content in Alloys and Dissolved Hydrogen—
- (2012) Takumi TERACHI et al. JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY
- Fatigue response of Udimet 720 following minimum damage wire electrical discharge machining
- (2012) M.T. Antar et al. MATERIALS & DESIGN
- The effects of residual stress on fatigue behavior and crack propagation from laser shock processing-worked hole
- (2012) X.D. Ren et al. MATERIALS & DESIGN
- Microstructural and Corrosion Characteristics of Alloying Modified Layer on 5083 Al Alloy by Electrical Discharge Alloying Process with Pure Silicon Electrode
- (2012) Kuralay Stambekova et al. MATERIALS TRANSACTIONS
- Advances in gamma titanium aluminides and their manufacturing techniques
- (2012) Kunal Kothari et al. PROGRESS IN AEROSPACE SCIENCES
- Subsurface deformation during precision turning of a near-alpha titanium alloy
- (2012) Pete Crawforth et al. SCRIPTA MATERIALIA
- Evolution of residual stress states in surface layers of an AISI D2 steel treated by low energy high current pulsed electron beam
- (2012) K.M. Zhang et al. VACUUM
- Investigating surface roughness, material removal rate and corrosion resistance in PMEDM of γ-TiAl intermetallic
- (2012) Behzad Jabbaripour et al. Journal of Manufacturing Processes
- Assessment of surface hardening effects from shot peening on a Ni-based alloy using electron backscatter diffraction techniques
- (2011) D.J. Child et al. ACTA MATERIALIA
- Machinability and surface integrity of RR1000 nickel based superalloy
- (2011) S.L. Soo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity in material removal processes: Recent advances
- (2011) I.S. Jawahir et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Sensitivity of stress corrosion cracking of stainless steel to surface machining and grinding procedure
- (2011) A. Turnbull et al. CORROSION SCIENCE
- Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy
- (2011) Z. Pu et al. CORROSION SCIENCE
- Role of residual stresses induced by industrial fabrication on stress corrosion cracking susceptibility of austenitic stainless steel
- (2011) Swati Ghosh et al. MATERIALS & DESIGN
- Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys
- (2011) Hamid Reza Bakhsheshi Rad et al. MATERIALS & DESIGN
- The corrosion resistance of Nitinol alloy in simulated physiological solutions
- (2011) Ingrid Milošev et al. Materials Science & Engineering C-Materials for Biological Applications
- Improvement of fatigue property in 7050–T7451 aluminum alloy by laser peening and shot peening
- (2011) Y.K. Gao MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of peening technique using recirculating shot accelerated by water jet
- (2011) A Naito et al. MATERIALS SCIENCE AND TECHNOLOGY
- Microstructural Characterization of the White Etching Layer in Nickel-Based Superalloy
- (2011) A. M. Wusatowska-Sarnek et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Solid particle erosion on coatings employed to protect die casting molds
- (2011) J.R. Laguna-Camacho et al. PROGRESS IN ORGANIC COATINGS
- Effect of sealed anodic film on fatigue performance of 2214-T6 aluminum alloy
- (2011) Majid Shahzad et al. SURFACE & COATINGS TECHNOLOGY
- Impact of wire-EDM on dry sliding friction and wear of WC-based and ZrO2-based composites
- (2011) Y. Perez Delgado et al. WEAR
- Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel
- (2010) J.Z. Lu et al. ACTA MATERIALIA
- Effect of Grain Size on Corrosion: A Review
- (2010) K. D. Ralston et al. CORROSION
- Localized corrosion of a 2219 aluminium alloy exposed to a 3.5% NaCl solution
- (2010) Rossana Grilli et al. CORROSION SCIENCE
- The effect of Electro Discharge Machining (EDM) on the corrosion resistance of dental alloys
- (2010) Argyro Ntasi et al. DENTAL MATERIALS
- Effect of grain size on corrosion of high purity aluminium
- (2010) K.D. Ralston et al. ELECTROCHIMICA ACTA
- Effect of Tolyltriazole on the Corrosion Protection of Copper against Ammonia and Disinfectants in Cooling Systems
- (2010) Ming-Kai Hsieh et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- The effect of manufacturing variables on the corrosion resistance of a super duplex stainless steel
- (2010) A. M. Elhoud et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining induced surface integrity in titanium and nickel alloys: A review
- (2010) Durul Ulutan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of pitting corrosion on fatigue performance of shot-peened aluminium alloy 7075-T651
- (2010) U. Zupanc et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural changes in AISI 304L stainless steel due to surface machining: Effect on its susceptibility to chloride stress corrosion cracking
- (2010) Swati Ghosh et al. JOURNAL OF NUCLEAR MATERIALS
- Fatigue endurance of Ti-6Al-4V alloy with electro-eroded surface for improved bone in-growth
- (2010) Miloš Janeček et al. Journal of the Mechanical Behavior of Biomedical Materials
- Tribocorrosion behavior of β titanium alloys in physiological solutions containing synovial components
- (2010) N.S. More et al. Materials Science & Engineering C-Materials for Biological Applications
- Influence of a white layer on the performance of hard machined surfaces in rolling contact
- (2010) Y Choi PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Revealing the relationship between grain size and corrosion rate of metals
- (2010) K.D. Ralston et al. SCRIPTA MATERIALIA
- Mechanisms of hardening, wear and corrosion improvement of 316L stainless steel by low energy high current pulsed electron beam surface treatment
- (2010) J.X. Zou et al. THIN SOLID FILMS
- An Experimental Study on the Effect of Machining-Induced White Layer on Frictional and Wear Performance at Dry and Lubricated Sliding Contact
- (2010) Y. B. Guo et al. TRIBOLOGY TRANSACTIONS
- The effect of laser polishing on fretting wear between a hemisphere and a flat plate
- (2010) B. Raeymaekers et al. WEAR
- Electropolishing and passivation of NiTi shape memory alloy
- (2009) Wojciech Simka et al. ELECTROCHIMICA ACTA
- A study on the effects of machining-induced residual stress on rolling contact fatigue
- (2009) Youngsik Choi INTERNATIONAL JOURNAL OF FATIGUE
- Influence of tool flank wear on performance of finish hard machined surfaces in rolling contact
- (2009) Youngsik Choi INTERNATIONAL JOURNAL OF FATIGUE
- Effect of surface machining and cold working on the ambient temperature chloride stress corrosion cracking susceptibility of AISI 304L stainless steel
- (2009) Swati Ghosh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Electropolishing effects on corrosion behavior of 304 stainless steel in high temperature, hydrogenated water
- (2008) Stephen E. Ziemniak et al. CORROSION SCIENCE
- The effect of machining on the surface integrity and fatigue life
- (2008) A JAVIDI et al. INTERNATIONAL JOURNAL OF FATIGUE
- Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy
- (2008) M SURARATCHAI et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect on fatigue performance of shot peened components: An analysis using DOE technique
- (2008) S MAHAGAONKAR et al. INTERNATIONAL JOURNAL OF FATIGUE
- Improving the fatigue life of electro-discharge-machined SDK11 tool steel via the suppression of surface cracks
- (2008) T TAI et al. INTERNATIONAL JOURNAL OF FATIGUE
- Recast layer removal after electrical discharge machining via Taguchi analysis: A feasibility study
- (2008) Che-Chung Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface structure and biomedical properties of chemically polished and electropolished NiTi shape memory alloys
- (2008) C.L. Chu et al. Materials Science & Engineering C-Materials for Biological Applications
- Sol–gel coatings on metals for corrosion protection
- (2008) Duhua Wang et al. PROGRESS IN ORGANIC COATINGS
- Electrodeposition of Ni–SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics
- (2007) M.R. Vaezi et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- Laser beam machining—A review
- (2007) Avanish Kumar Dubey et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Simulation of stress corrosion cracking behavior in a tube-shaped specimen of nickel-based alloy 600
- (2007) Yasumoto Sato et al. NUCLEAR ENGINEERING AND DESIGN
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started