Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review
出版年份 2021 全文链接
标题
Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review
作者
关键词
High speed metal cutting, Material deformation, Material removal mechanism, Surface integrity, Cutting force and temperature, Cutting tools
出版物
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 166, Issue -, Pages 103744
出版商
Elsevier BV
发表日期
2021-05-14
DOI
10.1016/j.ijmachtools.2021.103744
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Cutting responses of additive manufactured Ti6Al4V with solid ceramic tool under dry high-speed milling processes
- (2020) Heng Zhang et al. CERAMICS INTERNATIONAL
- Geometric dynamic recrystallization of austenitic stainless steel through linear plane-strain machining
- (2020) Yaakov Idell et al. PHILOSOPHICAL MAGAZINE
- A quantitative analysis of the transition of fracture mechanisms of Ti6Al4V over a wide range of stress triaxiality and strain rate
- (2020) Bing Wang et al. ENGINEERING FRACTURE MECHANICS
- A novel method to continuously map the surface integrity and cutting mechanism transition in various cutting conditions
- (2020) Dongdong Xu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation on surface quality of high-speed cutting titanium alloy Ti6Al4V based on Split-Hopkinson pressure bar
- (2020) Zhanfei Zhang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- High speed machining of near-beta titanium Ti-5553 alloy under various cooling and lubrication conditions
- (2019) Emre Tascioglu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A quick method for evaluating the thresholds of workpiece surface damage in machining
- (2019) Dongdong Xu et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Surface integrity analysis for high-pressure jet assisted machined Ti-6Al-4V considering cooling pressures and injection positions
- (2019) Xiaoliang Liang et al. Journal of Manufacturing Processes
- New In Situ Imaging-Based Methodology to Identify the Material Constitutive Model Coefficients in Metal Cutting Process
- (2019) Xiao-Ming Zhang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Alloy Inconel 718
- (2019) Bing Wang et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Analysis and constitutive modeling of high strain rate deformation behavior of Haynes 282 aerospace superalloy
- (2019) Nnaemeka Emmanuel Ugodilinwa et al. Materials Today Communications
- State-of-the-art of surface integrity in machining of metal matrix composites
- (2019) Zhirong Liao et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Residual stress regenerated on low plasticity burnished Inconel 718 surface after initial turning process
- (2019) Yang Hua et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Quantitative characterization of machining-induced white layers in Ti–6Al–4V
- (2019) M. Brown et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - Mechanical machining case
- (2019) Zhirong Liao et al. ACTA MATERIALIA
- The effects of stress triaxiality and strain rate on the fracture strain of Ti6Al4V
- (2019) Bing Wang et al. ENGINEERING FRACTURE MECHANICS
- Experimental investigation of dynamic chip formation in orthogonal cutting
- (2019) Tamas G. Molnar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 718
- (2019) Yang Hua et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Surface Mechanical Treatments on the Microstructure-Property-Performance of Engineering Alloys
- (2019) Dharmesh Kumar et al. Materials
- Machining of particulate-reinforced metal matrix composites: An investigation into the chip formation and subsurface damage
- (2019) Qi Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of scratching speed on phase transformations in high-speed scratching of monocrystalline silicon
- (2019) Bing Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wear performance investigation of PVD coated and uncoated carbide tools during high-speed machining of TiAl6V4 aerospace alloy
- (2019) M.S.I. Chowdhury et al. WEAR
- Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review
- (2018) Bing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A probabilistic approach to study the effect of machined surface states on HCF behavior of a AA7050 alloy
- (2018) Foued Abroug et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting
- (2018) Xingchen Yan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Experimental study on fracture mechanism transformation in chip segmentation of Ti-6Al-4V alloys during high-speed machining
- (2018) Hongguang Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools
- (2018) Xiaoliang Liang et al. TRIBOLOGY INTERNATIONAL
- Environmental friendly hard machining performance of uncoated and MoS 2 coated mechanical micro-textured tungsten carbide cutting tools
- (2018) Kishor Kumar Gajrani et al. TRIBOLOGY INTERNATIONAL
- Wear and Tribological Performance of Different Ceramic Tools in Dry High Speed Machining of Ni-Co-Cr Precipitation Hardenable Aerospace Superalloy
- (2018) Mohamed A. Shalaby et al. TRIBOLOGY TRANSACTIONS
- Influences of Cutting Speed and Material Mechanical Properties on Chip Deformation and Fracture during High-Speed Cutting of Inconel 718
- (2018) Bing Wang et al. Materials
- Effect of nozzle size scaling in co-flow water cavitation jet peening
- (2018) Andrea Marcon et al. Journal of Manufacturing Processes
- Surface residual stress in high speed cutting of superalloy Inconel718 based on multiscale simulation
- (2018) YiHang Fan et al. Journal of Manufacturing Processes
- A physically based constitutive model for predicting the surface integrity in machining of Waspaloy
- (2018) Stano Imbrogno et al. MATERIALS & DESIGN
- The effect of surface damage and residual stresses on the fatigue life of nickel superalloys at high temperature
- (2018) R.M.N. Fleury et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of machining parameters on cutting force and surface integrity when high-speed turning AD 730™ with PCBN tools
- (2018) Zhe Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy
- (2018) Bing Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining
- (2017) M. Daoud et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Modelling of flexible manufacturing system: a review
- (2017) Anupma Yadav et al. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
- Efficient Multiscale Modeling and Validation of Residual Stress Field in Cutting
- (2017) F. Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Crack initiation in the very high cycle fatigue regime of nitrided 42CrMo4 steel
- (2017) Anja Weidner et al. JOURNAL OF MATERIALS RESEARCH
- Practical applications of the “energy–triaxiality” state relationship in metal cutting
- (2017) Yalla Abushawashi et al. MACHINING SCIENCE AND TECHNOLOGY
- Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T7451 aluminum alloy and Inconel 718 superalloy
- (2017) Bing Wang et al. Journal of Manufacturing Processes
- Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy
- (2017) Qingqing Wang et al. MATERIALS & DESIGN
- Distortion caused by residual stresses in machining aeronautical aluminum alloy parts: recent advances
- (2016) Jian-guang Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites
- (2016) Roland Bejjani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Hybrid modeling with finite element and statistical methods for residual stress prediction in peripheral milling of titanium alloy Ti-6Al-4V
- (2016) Dong Yang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Cutting performance of solid ceramic end milling tools in machining hardened AISI H13 steel
- (2016) Bing Wang et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining of 7050-T7451 aluminum alloy
- (2016) Bing Wang et al. JOURNAL OF CLEANER PRODUCTION
- PVDF sensor based monitoring of single-point cutting
- (2016) Vinh Nguyen et al. Journal of Manufacturing Processes
- Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V
- (2016) Bing Wang et al. MATERIALS & DESIGN
- A comprehensive experimental and numerical study on redistribution of residual stresses by shot peening
- (2016) A.H. Mahmoudi et al. MATERIALS & DESIGN
- A physically based constitutive model for simulation of segmented chip formation in orthogonal cutting of commercially pure titanium
- (2015) Shreyes N. Melkote et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Modification of the Shear-Compression Specimen for Large Strain Testing
- (2015) A. Dorogoy et al. EXPERIMENTAL MECHANICS
- 3D FEM simulation of chip breakage in metal cutting
- (2015) S. Buchkremer et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining
- (2015) Qingqing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influences of chip serration on micro-topography of machined surface in high-speed cutting
- (2015) Guosheng Su et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigations of critical cutting speed and ductile-to-brittle transition mechanism for workpiece material in ultra-high speed machining
- (2015) Bing Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Brittle Removal Mechanism of Ductile Materials With Ultrahigh-Speed Machining
- (2015) Bing Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Determination of Johnson cook material and failure model constants and numerical modelling of Charpy impact test of armour steel
- (2015) A. Banerjee et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Shear localization sensitivity analysis for Johnson–Cook constitutive parameters on serrated chips in high speed machining of Ti6Al4V
- (2015) Bing Wang et al. SIMULATION MODELLING PRACTICE AND THEORY
- Investigations on the chip formation mechanism and shear localization sensitivity of high-speed machining Ti6Al4V
- (2014) Bing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Critical cutting speed for onset of serrated chip flow in high speed machining
- (2014) G.G. Ye et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Deformation-phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy
- (2013) Jin Du et al. APPLIED SURFACE SCIENCE
- Investigations of yield stress, fracture toughness, and energy distribution in high speed orthogonal cutting
- (2013) Bing Wang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupted cutting 1045 steel by inverse heat conduction method
- (2013) Fulin Jiang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling
- (2013) Paul A. Colegrove et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Tool life and wear mechanisms in high speed machining of Ti–6Al–4V alloy with PCD tools under various coolant pressures
- (2013) Rosemar B. da Silva et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti–6Al–4V
- (2013) A. Molinari et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature
- (2013) Xiangyu Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Serrated chip formation mechanism based on mixed mode of ductile fracture and adiabatic shear
- (2013) Bing Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining
- (2013) Y. Kaynak et al. WEAR
- Tool Life and Surface Integrity in High-speed Milling of Titanium Alloy TA15 with PCD/PCBN Tools
- (2012) Honghua SU et al. Chinese Journal of Aeronautics
- Surface integrity analysis of machined Inconel 718 over multiple length scales
- (2012) Rachid M'Saoubi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Prediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations
- (2012) T. Özel et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Cutting AISI 1045 steel at very high speeds
- (2012) G.G. Ye et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Very high speed cutting of Ti–6Al–4V titanium alloy – change in morphology and mechanism of chip formation
- (2012) G. Sutter et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Chip Flow and Scaling Laws in High Speed Metal Cutting
- (2012) Guy Sutter et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Controlling deformation and microstructure on machined surfaces
- (2011) Yang Guo et al. ACTA MATERIALIA
- Surface integrity in material removal processes: Recent advances
- (2011) I.S. Jawahir et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Velocity effects in metal forming and machining processes
- (2011) R. Neugebauer et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools
- (2011) Jinming Zhou et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure model
- (2011) Guang Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- 3D modeling of residual stresses induced in finish turning of an AISI304L stainless steel
- (2011) Frédéric Valiorgue et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Cutting temperature prediction in high speed machining by numerical modelling of chip formation and its dependence with crater wear
- (2011) G. List et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools
- (2011) J.M. Zhou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Adiabatic shear banding in AISI 1045 steel during high speed machining: Mechanisms of microstructural evolution
- (2011) C.Z. Duan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Characterization of the White Etching Layer in Nickel-Based Superalloy
- (2011) A. M. Wusatowska-Sarnek et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A model of grain fragmentation based on lattice curvature
- (2009) László S. Tóth et al. ACTA MATERIALIA
- The use of hat-shaped specimens to study the high strain rate shear behaviour of Ti–6Al–4V
- (2009) J. Peirs et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Investigations of White Layer Formation During Machining of Powder Metallurgical Ni-Based ME 16 Superalloy
- (2009) S. C. Veldhuis et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Sub-surface and surface analysis of high speed machined Ti–6Al–4V alloy
- (2009) J.D. Puerta Velásquez et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation
- (2009) C. Maranhão et al. SIMULATION MODELLING PRACTICE AND THEORY
- Numerical investigating the effect of machining parameters on residual stresses in orthogonal cutting
- (2009) M. Mohammadpour et al. SIMULATION MODELLING PRACTICE AND THEORY
- Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy
- (2008) M SURARATCHAI et al. INTERNATIONAL JOURNAL OF FATIGUE
- Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)
- (2008) Tarek Mabrouki et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface integrity of dry machined titanium alloys
- (2008) A. Ginting et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analytical and Thermal Modeling of High-Speed Machining With Chamfered Tools
- (2008) Yiğit Karpat et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Adiabatic shear critical condition in the high-speed cutting
- (2008) Li Guohe et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Diffusion wear mechanism during high-speed machining of 7475-T7351 aluminum alloy with carbide end mills
- (2008) V.D. Calatoru et al. WEAR
- A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V
- (2007) Madalina Calamaz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718
- (2007) R.S. Pawade et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Finite element simulation of conventional and high speed machining of Ti6Al4V alloy
- (2007) Domenico Umbrello JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now