Review of the synergies between computational modeling and experimental characterization of materials across length scales

Statistical construction of 3-D microstructures from 2-D exemplars collected on oblique sections

(2016) David M. Turner et al.   ACTA MATERIALIA

An Open Source Software for the Measurement of Deformation Fields by Means of Digital Image Correlation

(2016) N. Vanderesse et al.   MICROSCOPY AND MICROANALYSIS

Atomistic simulation and virtual diffraction characterization of homophase and heterophase alumina interfaces

(2015) Shawn P. Coleman et al.   ACTA MATERIALIA

In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry

(2015) Martin Lentz et al.   ACTA MATERIALIA

In situ investigation of MgO nanocube deformation at room temperature

(2015) I. Issa et al.   ACTA MATERIALIA

Atom probe informed simulations of dislocation–precipitate interactions reveal the importance of local interface curvature

(2015) A. Prakash et al.   ACTA MATERIALIA

A statistical analysis of the influence of microstructure and twin–twin junctions on twin nucleation and twin growth in Zr

(2015) P.-A. Juan et al.   ACTA MATERIALIA

Effect of grain size on slip activity in pure magnesium polycrystals

(2015) C.M. Cepeda-Jiménez et al.   ACTA MATERIALIA

Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part II – crystal plasticity finite element modeling

(2015) Hamidreza Abdolvand et al.   ACTA MATERIALIA

High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy

(2015) J.C. Stinville et al.   ACTA MATERIALIA

Materials Data Science: Current Status and Future Outlook

(2015) Surya R. Kalidindi et al.   Annual Review of Materials Research

Corrigendum to “On the current role of atom probe tomography in materials characterization and materials science” [Current Opinion Solid State Mater. Sci. 17/5 (2014) 217–223]

(2015) Emmanuelle A. Marquis et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

New opportunities for quantitative tracking of polycrystal responses in three dimensions

(2015) Jay C. Schuren et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

In-situ observation of bulk 3D grain evolution during plastic deformation in polycrystalline Cu

(2015) Reeju Pokharel et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Generation and propagation dynamics of Airy beam with the tunable tail

(2015) Huilong Liu et al.   JOURNAL OF MODERN OPTICS

Calculation of grain boundary normals directly from 3D microstructure images

(2015) E J Lieberman et al.   MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING

3D visualization of dislocation arrangement using scanning electron microscope serial sectioning method

(2015) S. Yamasaki et al.   SCRIPTA MATERIALIA

Estimation of dislocation density from precession electron diffraction data using the Nye tensor

(2015) A.C. Leff et al.   ULTRAMICROSCOPY

Comparison between dislocation dynamics model predictions and experiments in precipitation-strengthened Al–Li–Sc alloys

(2014) Matthew E. Krug et al.   ACTA MATERIALIA

Orientation-dependent indentation response of magnesium single crystals: Modeling and experiments

(2014) Balaji Selvarajou et al.   ACTA MATERIALIA

Three-dimensional characterization of microstructurally small fatigue-crack evolution using quantitative fractography combined with post-mortem X-ray tomography and high-energy X-ray diffraction microscopy

(2014) Ashley D. Spear et al.   ACTA MATERIALIA

Quantitative analysis of crystal scale deformation heterogeneity during cyclic plasticity using high-energy X-ray diffraction and finite-element simulation

(2014) Mark Obstalecki et al.   ACTA MATERIALIA

Integrated experimental–simulation analysis of stress and strain partitioning in multiphase alloys

(2014) C.C. Tasan et al.   ACTA MATERIALIA

Mapping deformation in small-scale testing

(2014) Fabio Di Gioacchino et al.   ACTA MATERIALIA

Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al–Mg alloy

(2014) X. Sauvage et al.   ACTA MATERIALIA

Descriptor-based methodology for statistical characterization and 3D reconstruction of microstructural materials

(2014) Hongyi Xu et al.   COMPUTATIONAL MATERIALS SCIENCE

Understanding local deformation in metallic polycrystals using high energy X-rays and finite elements

(2014) M.P. Miller et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

EFFICIENT FATIGUE SIMULATION USING PERIODIC HOMOGENIZATION WITH MULTIPLE TIME SCALES

(2014) Guillaume Puel et al.   International Journal for Multiscale Computational Engineering

An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy

(2014) V. Herrera-Solaz et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Plastic material parameters and plastic anisotropy of tungsten single crystal: a spherical micro-indentation study

(2014) W. Z. Yao et al.   JOURNAL OF MATERIALS SCIENCE

Towards ultimate temporal and spatial resolutions with ultrafast single-electron diffraction

(2014) Peter Baum   JOURNAL OF PHYSICS B-ATOMIC MOLECULAR AND OPTICAL PHYSICS

Identification of sub-grains and low angle boundaries beyond the angular resolution of EBSD maps

(2014) L. Germain et al.   MATERIALS CHARACTERIZATION

Automated crystal orientation and phase mapping in TEM

(2014) E.F. Rauch et al.   MATERIALS CHARACTERIZATION

A multiscale approach for the deformation mechanism in pearlite microstructure: Atomistic study of the role of the heterointerface on ductility

(2014) Tomotsugu Shimokawa et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V

(2014) M. Simonelli et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Atomistic simulation of tantalum nanoindentation: Effects of indenter diameter, penetration velocity, and interatomic potentials on defect mechanisms and evolution

(2014) C.J. Ruestes et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Wet-STEM Tomography: Principles, Potentialities and Limitations

(2014) Karine Masenelli-Varlot et al.   MICROSCOPY AND MICROANALYSIS

Molecular dynamics simulations of shock-compressed single-crystal silicon

(2014) Gabriele Mogni et al.   PHYSICAL REVIEW B

Strain Profiling of a Ferritic-Martensitic Stainless Steel Sheet - Comparing Synchrotron with Conventional X-Ray Diffraction

(2014) C.-O. A. Olsson et al.   STRAIN

Theory of dynamical electron channeling contrast images of near-surface crystal defects

(2014) Y.N. Picard et al.   ULTRAMICROSCOPY

A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction

(2014) K. Babinsky et al.   ULTRAMICROSCOPY

Polycrystal Plasticity: Comparison Between Grain - Scale Observations of Deformation and Simulations

(2014) Reeju Pokharel et al.   Annual Review of Condensed Matter Physics

Atomically resolved tomography to directly inform simulations for structure–property relationships

(2014) Michael P. Moody et al.   Nature Communications

In situ nanoindentation study on plasticity and work hardening in aluminium with incoherent twin boundaries

(2014) D. Bufford et al.   Nature Communications

3D RECONSTRUCTION OF A MULTISCALE MICROSTRUCTURE BY ANISOTROPIC TESSELLATION MODELS

(2014) Hellen Altendorf et al.   Image Analysis & Stereology

Three-dimensional characterization of ODS ferritic steel using by FIB-SEM serial sectioning method

(2014) T. Endo et al.   Microscopy

Structural Reconstruction of the Graphene Monovacancy

(2013) Alex W. Robertson et al.   ACS Nano

On the current role of atom probe tomography in materials characterization and materials science

(2013) Emmanuelle A. Marquis et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Atom probe tomography spatial reconstruction: Status and directions

(2013) D.J. Larson et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

The feedback loop between theory, simulation and experiment for plasticity and property modeling

(2013) Tresa M. Pollock et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Numerical strategy for unbiased homogenization of random materials

(2013) R. Cottereau   INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING

Quantitative X-ray tomography

(2013) E. Maire et al.   INTERNATIONAL MATERIALS REVIEWS

Advances in X-ray diffraction contrast tomography: flexibility in the setup geometry and application to multiphase materials

(2013) Péter Reischig et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Electron backscatter diffraction investigation of local misorientations and orientation gradients in connection with evolution of grain boundary structures in deformed and annealed zirconium. A new approach in grain boundary analysis

(2013) Mariusz Jedrychowski et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Adaptive reconstruction method for three-dimensional orientation imaging

(2013) S. F. Li et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Molecular dynamics simulations of shock-induced deformation twinning of a body-centered-cubic metal

(2013) A. Higginbotham et al.   PHYSICAL REVIEW B

A coupling method for stochastic continuum models at different scales

(2013) Y. Le Guennec et al.   PROBABILISTIC ENGINEERING MECHANICS

Femtosecond Visualization of Lattice Dynamics in Shock-Compressed Matter

(2013) D. Milathianaki et al.   SCIENCE

Ultrafast Three-Dimensional Imaging of Lattice Dynamics in Individual Gold Nanocrystals

(2013) J. N. Clark et al.   SCIENCE

Plastic strain heterogeneities in an Mg–1Zn–0.5Nd alloy

(2013) Guilhem Martin et al.   SCRIPTA MATERIALIA

Estimation of unknown structure parameters from high-resolution (S)TEM images: What are the limits?

(2013) A.J. den Dekker et al.   ULTRAMICROSCOPY

Strain measurement at the nanoscale: Comparison between convergent beam electron diffraction, nano-beam electron diffraction, high resolution imaging and dark field electron holography

(2013) A. Béché et al.   ULTRAMICROSCOPY

Estimations of bulk geometrically necessary dislocation density using high resolution EBSD

(2013) T.J. Ruggles et al.   ULTRAMICROSCOPY

Dynamic scattering theory for dark-field electron holography of 3D strain fields

(2013) Axel Lubk et al.   ULTRAMICROSCOPY

Challenges in Multiscale Modeling of Polymer Dynamics

(2013) Ying Li et al.   Polymers

4D Electron Microscopy: Principles and Applications

(2012) David J. Flannigan et al.   ACCOUNTS OF CHEMICAL RESEARCH

Polycrystal model of the mechanical behavior of a Mo–TiC30 vol.% metal–ceramic composite using a three-dimensional microstructure map obtained by dual beam focused ion beam scanning electron microscopy

(2012) D. Cédat et al.   ACTA MATERIALIA

Measuring the stress field around an evolving crack in tensile deformed Mg AZ31 using three-dimensional X-ray diffraction

(2012) Jette Oddershede et al.   ACTA MATERIALIA

Fatigue and Damage in Structural Materials Studied by X-Ray Tomography

(2012) Philip J. Withers et al.   Annual Review of Materials Research

A multiscale method with patch for the solution of stochastic partial differential equations with localized uncertainties

(2012) M. Chevreuil et al.   COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

Uncertainty quantification in computational stochastic multiscale analysis of nonlinear elastic materials

(2012) A. Clément et al.   COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

Computational microstructure characterization and reconstruction for stochastic multiscale material design

(2012) Yu Liu et al.   COMPUTER-AIDED DESIGN

Quantitative Strain Analysis of the Large Deformation at the Scale of Microstructure: Comparison between Digital Image Correlation and Microgrid Techniques

(2012) H. Ghadbeigi et al.   EXPERIMENTAL MECHANICS

Multiscale fatigue life prediction model for heterogeneous materials

(2012) Jacob Fish et al.   INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING

A review on 3D micro-additive manufacturing technologies

(2012) Mohammad Vaezi et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Experimental validation of multiscale modeling of indentation of suspended circular graphene membranes

(2012) Xiaoding Wei et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Impact of material processing and deformation on cell morphology and mechanical behavior of polyurethane and nickel foams

(2012) A. Burteau et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Disclination densities from EBSD orientation mapping

(2012) Benoît Beausir et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Molecular Dynamics Simulation of FCC Metallic Nanowires: A Review

(2012) Jijun Lao et al.   JOM

An introduction to three-dimensional X-ray diffraction microscopy

(2012) Henning Friis Poulsen   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Effects of lattice defects on indentation-induced plasticity initiation behavior in metals

(2012) T. Ohmura et al.   JOURNAL OF MATERIALS RESEARCH

The future of atom probe tomography

(2012) Michael K. Miller et al.   Materials Today

Approaches for ultrafast imaging of transient materials processes in the transmission electron microscope

(2012) Thomas LaGrange et al.   MICRON

Real-time manipulation of ZnO nanowires on a flat surface employed for tribological measurements: Experimental methods and modeling

(2012) Leonid M. Dorogin et al.   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Hierarchical nanostructured conducting polymer hydrogel with high electrochemical activity

(2012) L. Pan et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Designing architectured materials

(2012) Mike Ashby   SCRIPTA MATERIALIA

Deformation mechanisms in nanocrystalline metals: Insights from in-situ diffraction and crystal plasticity modelling

(2012) S. Van Petegem et al.   THIN SOLID FILMS

Strain mapping near a triple junction in strained Ni-based alloy using EBSD and biaxial nanogauges

(2011) A. Clair et al.   ACTA MATERIALIA

Kinetic study of phase transformation in a highly concentrated Fe–Cr alloy: Monte Carlo simulation versus experiments

(2011) C. Pareige et al.   ACTA MATERIALIA

Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations

(2011) M.A. Lodes et al.   ACTA MATERIALIA

Prediction of internal stresses during growth of first- and second-generation twins in Mg and Mg alloys

(2011) P.-A. Juan et al.   ACTA MATERIALIA

Multiscale simulation of nanometric cutting of single crystal copper and its experimental validation

(2011) H.M. Pen et al.   COMPUTATIONAL MATERIALS SCIENCE

A stochastic-deterministic coupling method for continuum mechanics

(2011) R. Cottereau et al.   COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

A probabilistic model for bounded elasticity tensor random fields with application to polycrystalline microstructures

(2011) J. Guilleminot et al.   COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

Recent developments in dynamic transmission electron microscopy

(2011) N.D. Browning et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Nanostructural and chemical characterization of supported metal oxide catalysts by aberration corrected analytical electron microscopy

(2011) Wu Zhou et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Orientation informed nanoindentation of α-titanium: Indentation pileup in hexagonal metals deforming by prismatic slip

(2011) Claudio Zambaldi et al.   JOURNAL OF MATERIALS RESEARCH

Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis

(2011) J V Bernier et al.   JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN

A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD

(2011) C. Rehrl et al.   MATERIALS CHARACTERIZATION

Open-cellular copper structures fabricated by additive manufacturing using electron beam melting

(2011) D.A. Ramirez et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Quantitative In Situ Mechanical Testing in Electron Microscopes

(2011) M. Legros et al.   MRS BULLETIN

In Situ Transmission Electron Microscopy Observation of Microstructure and Phase Evolution in a SnO2Nanowire during Lithium Intercalation

(2011) Chong-Min Wang et al.   NANO LETTERS

In situ nanocompression testing of irradiated copper

(2011) D. Kiener et al.   NATURE MATERIALS

Diffraction contrast STEM of dislocations: Imaging and simulations

(2011) P.J. Phillips et al.   ULTRAMICROSCOPY

Electron tomography combining ESEM and STEM: A new 3D imaging technique

(2011) P. Jornsanoh et al.   ULTRAMICROSCOPY

Grain detection from 2d and 3d EBSD data—Specification of the MTEX algorithm

(2011) Florian Bachmann et al.   ULTRAMICROSCOPY

Atomistic processes of dislocation generation and plastic deformation during nanoindentation

(2010) C. Begau et al.   ACTA MATERIALIA

Steel-Based Composites: Driving Forces and Classifications

(2010) David Embury et al.   Annual Review of Materials Research

Computing mechanical response variability of polycrystalline microstructures through dimensionality reduction techniques

(2010) Zheng Li et al.   COMPUTATIONAL MATERIALS SCIENCE

Influence of boundary conditions on bi-phased polycrystal microstructure calculation

(2010) P. Evrard et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

High-resolution electron backscatter diffraction: An emerging tool for studying local deformation

(2010) A J Wilkinson et al.   JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

(2010) Marion Calcagnotto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Statistical analyses of deformation twinning in magnesium

(2010) I.J. Beyerlein et al.   PHILOSOPHICAL MAGAZINE

Bending Crystals: Emergence of Fractal Dislocation Structures

(2010) Yong S. Chen et al.   PHYSICAL REVIEW LETTERS

Micro-architectured materials: past, present and future

(2010) N. A. Fleck et al.   PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

A statistical analysis of the variation in measured crystal orientations obtained through electron backscatter diffraction

(2010) Melissa A. Bingham et al.   ULTRAMICROSCOPY

Atomistic origin of microstrain broadening in diffraction data of nanocrystalline solids

(2009) A. Stukowski et al.   ACTA MATERIALIA

An image-guided atomistic reconstruction of pyrolytic carbons

(2009) Jean-Marc Leyssale et al.   APPLIED PHYSICS LETTERS

GND accumulation in bi-crystal deformation: Crystal plasticity analysis and comparison with experiments

(2009) H. Liang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Molecular Momentum Transport at Fluid-Solid Interfaces in MEMS/NEMS: A Review

(2009) Bing-Yang Cao et al.   INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES

Micro- and nanoscale tensile testing of materials

(2009) D. S. Gianola et al.   JOM

Review of Hierarchical Multiscale Modeling to Describe the Mechanical Behavior of Amorphous Polymers

(2009) J. L. Bouvard et al.   JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME

Multiscale modeling of emergent materials: biological and soft matter

(2009) Teemu Murtola et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

On the widths of orientation gradient zones adjacent to grain boundaries

(2009) S.K. Mishra et al.   SCRIPTA MATERIALIA

Complementary techniques for the characterization of thin film Ti/Nb multilayers

(2009) Arda Genç et al.   ULTRAMICROSCOPY

In situ TEM observations of fast grain-boundary motion in stressed nanocrystalline aluminum films

(2008) Marc Legros et al.   ACTA MATERIALIA

A framework for automated analysis and simulation of 3D polycrystalline microstructures.Part 1: Statistical characterization

(2008) M GROEBER   ACTA MATERIALIA

X-ray microdiffraction and strain gradient crystal plasticity studies of geometrically necessary dislocations near a Ni bicrystal grain boundary

(2008) Tetsuya Ohashi et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Informatics for combinatorial materials science

(2008) S. Broderick et al.   JOM

EBSD as a tool to identify and quantify bainite and ferrite in low-alloyed Al-TRIP steels

(2008) S. ZAEFFERER et al.   JOURNAL OF MICROSCOPY

Neutron and Synchrotron X-ray Studies of Recrystallization Kinetics

(2008) D. Juul Jensen et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Nanoindentation and mechanical properties of solids in submicrovolumes, thin near-surface layers, and films: A Review

(2008) Yu. I. Golovin   PHYSICS OF THE SOLID STATE

Concurrent design of hierarchical materials and structures

(2008) D. L. McDowell et al.  

Microstructure reconstructions from 2-point statistics using phase-recovery algorithms

(2007) David T. Fullwood et al.   ACTA MATERIALIA

Multiscale Simulation of Soft Matter: From Scale Bridging to Adaptive Resolution

(2007) Matej Praprotnik et al.   Annual Review of Physical Chemistry

Tensor-valued random fields for meso-scale stochastic model of anisotropic elastic microstructure and probabilistic analysis of representative volume element size

(2007) C. Soize   PROBABILISTIC ENGINEERING MECHANICS