Recent progress in continuous and semi-continuous processing of solid oral dosage forms: a review
Published 2015 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Recent progress in continuous and semi-continuous processing of solid oral dosage forms: a review
Authors
Keywords
-
Journal
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
Volume 42, Issue 8, Pages 1195-1214
Publisher
Informa UK Limited
Online
2015-11-23
DOI
10.3109/03639045.2015.1122607
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Advantages and challenges of the spray-drying technology for the production of pure drug particles and drug-loaded polymeric carriers
- (2015) Alejandro Sosnik et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Continuous-Flow Technology-A Tool for the Safe Manufacturing of Active Pharmaceutical Ingredients
- (2015) Bernhard Gutmann et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Challenges and opportunities in modeling pharmaceutical manufacturing processes
- (2015) Amanda Rogers et al. COMPUTERS & CHEMICAL ENGINEERING
- Feasibility studies of concomitant administration of optimized formulation of probiotic-loaded Vancomycin hydrochloride pellets for colon delivery
- (2015) Amelia M. Avachat et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- A comparative study between conventional pan coater and quasi-continuous small batch coater on the stability of tablets containing acetylsalicylic acid
- (2015) Christine Cahyadi et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Use of a continuous twin screw granulation and drying system during formulation development and process optimization
- (2015) J. Vercruysse et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Continuous twin screw melt granulation of glyceryl behenate: Development of controlled release tramadol hydrochloride tablets for improved safety
- (2015) Justin M. Keen et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Formulation and development of pH-independent/dependent sustained release matrix tablets of ondansetron HCl by a continuous twin-screw melt granulation process
- (2015) Hemlata Patil et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Downstream processing of polymer-based amorphous solid dispersions to generate tablet formulations
- (2015) B. Démuth et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Control Systems Engineering in Continuous Pharmaceutical Manufacturing May 20–21, 2014 Continuous Manufacturing Symposium
- (2015) Allan S. Myerson et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Regulatory and Quality Considerations for Continuous Manufacturing May 20–21, 2014 Continuous Manufacturing Symposium
- (2015) Gretchen Allison et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Future Supply Chains Enabled by Continuous Processing—Opportunities Challenges May 20–21 2014 Continuous Manufacturing Symposium
- (2015) Jagjit Singh Srai et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Achieving Continuous Manufacturing: Technologies and Approaches for Synthesis, Workup, and Isolation of Drug Substance May 20–21, 2014 Continuous Manufacturing Symposium
- (2015) Ian R. Baxendale et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Achieving Continuous Manufacturing for Final Dosage Formation: Challenges and How to Meet Them May 20–21 2014 Continuous Manufacturing Symposium
- (2015) Stephen Byrn et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Achieving Continuous Manufacturing May 20–21 2014 Continuous Manufacturing Symposium
- (2015) Clive Badman et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- White Paper on Continuous Bioprocessing May 20–21 2014 Continuous Manufacturing Symposium
- (2015) Konstantin B. Konstantinov et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Effects of mill design and process parameters in milling dry extrudates
- (2015) Aditya Vanarase et al. POWDER TECHNOLOGY
- Twin screw granulation — A literature review
- (2015) Tim Chan Seem et al. POWDER TECHNOLOGY
- Process Analytical Technology for continuous manufacturing of solid-dosage forms
- (2015) Margot Fonteyne et al. TRAC-TRENDS IN ANALYTICAL CHEMISTRY
- Integrated Moving Horizon-Based Dynamic Real-Time Optimization and Hybrid MPC-PID Control of a Direct Compaction Continuous Tablet Manufacturing Process
- (2015) Ravendra Singh et al. Journal of Pharmaceutical Innovation
- Modernizing Pharmaceutical Manufacturing: from Batch to Continuous Production
- (2015) Sau L. Lee et al. Journal of Pharmaceutical Innovation
- Continuous Production of Fenofibrate Solid Lipid Nanoparticles by Hot-Melt Extrusion Technology: a Systematic Study Based on a Quality by Design Approach
- (2014) Hemlata Patil et al. AAPS Journal
- Discrete element reduced-order modeling of dynamic particulate systems
- (2014) Amanda Rogers et al. AICHE JOURNAL
- Blend uniformity and powder phenomena inside the continuous tumble mixer using DEM simulations
- (2014) Miguel Florian-Algarin et al. AICHE JOURNAL
- Continuous synthesis of artemisinin-derived medicines
- (2014) Kerry Gilmore et al. CHEMICAL COMMUNICATIONS
- Spray-dried didanosine-loaded polymeric particles for enhanced oral bioavailability
- (2014) Katia P. Seremeta et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Application of Spray-drying and Electrospraying/Electospinning for Poorly Watersoluble Drugs: A Particle Engineering Approach
- (2014) Adam Bohr et al. CURRENT PHARMACEUTICAL DESIGN
- Application of Hot Melt Extrusion for Poorly Water-Soluble Drugs: Limitations, Advances and Future Prospects
- (2014) Ming Lu et al. CURRENT PHARMACEUTICAL DESIGN
- Twin screw granulation – review of current progress
- (2014) M. R. Thompson DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Hot-melt extrusion – basic principles and pharmaceutical applications
- (2014) Bo Lang et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Development of drying-induced stresses in pharmaceutical granules prepared in continuous production line
- (2014) Maksim Mezhericher EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Prilling as manufacturing technique for multiparticulate lipid/PEG fixed-dose combinations
- (2014) A. Vervaeck et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Influence of raw material properties upon critical quality attributes of continuously produced granules and tablets
- (2014) Margot Fonteyne et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Moisture and drug solid-state monitoring during a continuous drying process using empirical and mass balance models
- (2014) Margot Fonteyne et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Crystal coating via spray drying to improve powder tabletability
- (2014) V. Vanhoorne et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Analysing drying unit performance in a continuous pharmaceutical manufacturing line by means of mass – Energy balances
- (2014) Séverine Thérèse F.C. Mortier et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Transdermal delivery of flurbiprofen from surfactant-based vesicles: Particle characterization and the effect of water on in vitro transport
- (2014) Tomonobu Uchino et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Implementation of an advanced hybrid MPC–PID control system using PAT tools into a direct compaction continuous pharmaceutical tablet manufacturing pilot plant
- (2014) Ravendra Singh et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Continuous manufacturing of solid lipid nanoparticles by hot melt extrusion
- (2014) Hemlata Patil et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- NIR spectroscopic method for the in-line moisture assessment during drying in a six-segmented fluid bed dryer of a continuous tablet production line: Validation of quantifying abilities and uncertainty assessment
- (2014) Margot Fonteyne et al. JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS
- Next Generation Drying Technologies for Pharmaceutical Applications
- (2014) Robert H. Walters et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Transfer from High‐Shear Batch to Continuous Twin Screw Wet Granulation: A Case Study in Understanding the Relationship Between Process Parameters and Product Quality Attributes
- (2014) Paul Beer et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Continuous Flow Total Synthesis of Rufinamide
- (2014) Ping Zhang et al. ORGANIC PROCESS RESEARCH & DEVELOPMENT
- New continuous tumble mixer characterization
- (2014) Miguel Florian et al. POWDER TECHNOLOGY
- Near Infrared Method Development for a Continuous Manufacturing Blending Process
- (2014) Yleana M. Colón et al. Journal of Pharmaceutical Innovation
- Real-Time Particle Size Analysis Using Focused Beam Reflectance Measurement as a Process Analytical Technology Tool for a Continuous Granulation–Drying–Milling Process
- (2013) Vijay Kumar et al. AAPS PHARMSCITECH
- End-to-End Continuous Manufacturing of Pharmaceuticals: Integrated Synthesis, Purification, and Final Dosage Formation
- (2013) Salvatore Mascia et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- A Continuous-Flow Process for the Synthesis of Artemisinin
- (2013) Daniel Kopetzki et al. CHEMISTRY-A EUROPEAN JOURNAL
- A review on the taste masking of bitter APIs: hot-melt extrusion (HME) evaluation
- (2013) Mohammed Maniruzzaman et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- In-line monitoring of the drug content of powder mixtures and tablets by near-infrared spectroscopy during the continuous direct compression tableting process
- (2013) Kristiina Järvinen et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Investigating the feasibility of temperature-controlled accelerated drug release testing for an intravaginal ring
- (2013) Anna Externbrink et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Prilling of fatty acids as a continuous process for the development of controlled release multiparticulate dosage forms
- (2013) A. Vervaeck et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- System-wide hybrid MPC–PID control of a continuous pharmaceutical tablet manufacturing process via direct compaction
- (2013) Ravendra Singh et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Use of near-infrared spectroscopy to quantify drug content on a continuous blending process: Influence of mass flow and rotation speed variations
- (2013) Lizbeth Martínez et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Stability and repeatability of a continuous twin screw granulation and drying system
- (2013) J. Vercruysse et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Exergetic sustainability assessment of batch versus continuous wet granulation based pharmaceutical tablet manufacturing: a cohesive analysis at three different levels
- (2013) Wouter De Soete et al. GREEN CHEMISTRY
- An Integrated Approach to Simulation of Pharmaceutical Processes for Solid Drug Manufacture
- (2013) Amanda J. Rogers et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Intelligent Alarm Management Applied to Continuous Pharmaceutical Tablet Manufacturing: An Integrated Approach
- (2013) Anshu Gupta et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Multi-scale flowsheet simulation of an integrated continuous purification–downstream pharmaceutical manufacturing process
- (2013) Maitraye Sen et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Hot-Melt Granulation in a Twin Screw Extruder: Effects of Processing on Formulations with Caffeine and Ibuprofen
- (2013) Sharleen Weatherley et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Passivation of High-Surface-Energy Sites of Milled Ibuprofen Crystals via Dry Coating for Reduced Cohesion and Improved Flowability
- (2013) Xi Han et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Hot-melt co-extrusion: requirements, challenges and opportunities for pharmaceutical applications
- (2013) An-Katrien Vynckier et al. JOURNAL OF PHARMACY AND PHARMACOLOGY
- Effects of powder flow properties and shear environment on the performance of continuous mixing of pharmaceutical powders
- (2013) Aditya U. Vanarase et al. POWDER TECHNOLOGY
- Continuous downstream processing of biopharmaceuticals
- (2013) Alois Jungbauer TRENDS IN BIOTECHNOLOGY
- Surrogate-Based Optimization of Expensive Flowsheet Modeling for Continuous Pharmaceutical Manufacturing
- (2013) Fani Boukouvala et al. Journal of Pharmaceutical Innovation
- Improving Continuous Powder Blending Performance Using Projection to Latent Structures Regression
- (2013) Yijie Gao et al. Journal of Pharmaceutical Innovation
- Population Balance Model Validation and Predictionof CQAs for Continuous Milling Processes: toward QbDin Pharmaceutical Drug Product Manufacturing
- (2013) Dana Barrasso et al. Journal of Pharmaceutical Innovation
- Computer-Aided Flowsheet Simulation of a Pharmaceutical Tablet Manufacturing Process Incorporating Wet Granulation
- (2013) Fani Boukouvala et al. Journal of Pharmaceutical Innovation
- A Study on In-Line Tablet Coating—the Influence of Compaction and Coating on Tablet Dimensional Changes
- (2012) C. Cahyadi et al. AAPS PHARMSCITECH
- A Feasibility Study on Pellet Coating Using a High-Speed Quasi-continuous Coater
- (2012) Christine Cahyadi et al. AAPS PHARMSCITECH
- Optimizing continuous powder mixing processes using periodic section modeling
- (2012) Yijie Gao et al. CHEMICAL ENGINEERING SCIENCE
- Towards achieving a flattop crystal size distribution by continuous seeding and controlled growth
- (2012) Mo Jiang et al. CHEMICAL ENGINEERING SCIENCE
- Continuous pellet coating in a Wurster fluidized bed process
- (2012) N. Hampel et al. CHEMICAL ENGINEERING SCIENCE
- An integrated approach for dynamic flowsheet modeling and sensitivity analysis of a continuous tablet manufacturing process
- (2012) Fani Boukouvala et al. COMPUTERS & CHEMICAL ENGINEERING
- Continuous direct tablet compression: effects of impeller rotation rate, total feed rate and drug content on the tablet properties and drug release
- (2012) Maiju A. Järvinen et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Active pharmaceutical ingredient (API) production involving continuous processes – A process system engineering (PSE)-assisted design framework
- (2012) Albert E. Cervera-Padrell et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Continuous twin screw granulation: Influence of process variables on granule and tablet quality
- (2012) J. Vercruysse et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Prediction of quality attributes of continuously produced granules using complementary pat tools
- (2012) Margot Fonteyne et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Solid crystal suspensions containing griseofulvin – Preparation and bioavailability testing
- (2012) Elena Reitz et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- An engineering study on the enhanced control and operation of continuous manufacturing of pharmaceutical tablets via roller compaction
- (2012) Ravendra Singh et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Quantitative evaluation of a hydrophilic matrix intravaginal ring for the sustained delivery of tenofovir
- (2012) Justin T. Clark et al. JOURNAL OF CONTROLLED RELEASE
- Preparation and Characterization of Surface-Engineered Coarse Microcrystalline Cellulose Through Dry Coating with Silica Nanoparticles
- (2012) Qun Zhou et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Oral transmucosal delivery of domperidone from immediate release films produced via hot-melt extrusion technology
- (2012) Chinna Reddy Palem et al. PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY
- Scale-up strategy for continuous powder blending process
- (2012) Yijie Gao et al. POWDER TECHNOLOGY
- Real-time Exceptional Events Management for a Partial Continuous Dry Granulation Line
- (2012) Intan Munirah Hamdan et al. Journal of Pharmaceutical Innovation
- Inline Real-Time Near-Infrared Granule Moisture Measurements of a Continuous Granulation–Drying–Milling Process
- (2011) Lipika Chablani et al. AAPS PHARMSCITECH
- Periodic section modeling of convective continuous powder mixing processes
- (2011) Yijie Gao et al. AICHE JOURNAL
- Model-based design and control of a continuous drum granulation process
- (2011) Rohit Ramachandran et al. CHEMICAL ENGINEERING RESEARCH & DESIGN
- Melt extrusion: process to product
- (2011) Michael A Repka et al. Expert Opinion on Drug Delivery
- Economic Analysis of Integrated Continuous and Batch Pharmaceutical Manufacturing: A Case Study
- (2011) Spencer D. Schaber et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Cone milling of compacted flakes: Process parameter selection by adopting the minimal fines approach
- (2011) A.K. Samanta et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Microencapsulation of Lactobacillus plantarum (mtcc 5422) by spray-freeze-drying method and evaluation of survival in simulated gastrointestinal conditions
- (2011) Priyanka Dolly et al. JOURNAL OF MICROENCAPSULATION
- Profoundly improving flow properties of a cohesive cellulose powder by surface coating with nano‐silica through comilling
- (2011) Sayantan Chattoraj et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Model-Based Control-Loop Performance of a Continuous Direct Compaction Process
- (2011) Rohit Ramachandran et al. Journal of Pharmaceutical Innovation
- Application of Twin Screw Extrusion in the Manufacture of Cocrystals, Part I: Four Case Studies
- (2011) Dominick Daurio et al. Pharmaceutics
- Optimization of Process Parameters for a Quasi-Continuous Tablet Coating System Using Design of Experiments
- (2010) Christine Cahyadi et al. AAPS PHARMSCITECH
- Development of directly compressible metformin hydrochloride by the spray-drying technique
- (2010) Bhavesh Barot et al. ACTA PHARMACEUTICA
- Investigation of the effect of impeller rotation rate, powder flow rate, and cohesion on powder flow behavior in a continuous blender using PEPT
- (2010) Patricia M. Portillo et al. CHEMICAL ENGINEERING SCIENCE
- Real-time monitoring of drug concentration in a continuous powder mixing process using NIR spectroscopy
- (2010) Aditya U. Vanarase et al. CHEMICAL ENGINEERING SCIENCE
- Characterizing continuous powder mixing using residence time distribution
- (2010) Yijie Gao et al. CHEMICAL ENGINEERING SCIENCE
- Near infrared and Raman spectroscopy for the in-process monitoring of pharmaceutical production processes
- (2010) T. De Beer et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Effect of operating conditions and design parameters in a continuous powder mixer
- (2010) Aditya U. Vanarase et al. POWDER TECHNOLOGY
- Population Balance Model-Based Hybrid Neural Network for a Pharmaceutical Milling Process
- (2010) Pavan Kumar Akkisetty et al. Journal of Pharmaceutical Innovation
- Evaluation of recent advances in continuous film coating processes
- (2009) Charles Cunningham et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Spray Drying Technique. I: Hardware and Process Parameters
- (2009) Krzysztof Cal et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Spray Drying Technique: II. Current Applications in Pharmaceutical Technology
- (2009) Krzysztof Sollohub et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Compact and efficient continuous mixing processes for production of food and pharmaceutical powders
- (2009) Ralf Weinekötter TRENDS IN FOOD SCIENCE & TECHNOLOGY
- Continuous mixing of powder mixtures with pharmaceutical process constraints
- (2008) Henri Berthiaux et al. CHEMICAL ENGINEERING AND PROCESSING
- Influence of stirrer type on mixture homogeneity in continuous powder mixing: A model case and a pharmaceutical case
- (2008) K. Marikh et al. CHEMICAL ENGINEERING RESEARCH & DESIGN
- Mixture Design Applied to Optimize a Directly Compressible Powder Produced via Cospray Drying
- (2008) Yves Gonnissen et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Production of pellets via extrusion–spheronisation without the incorporation of microcrystalline cellulose: A critical review
- (2008) A DUKICOTT et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Applications of hot-melt extrusion for drug delivery
- (2008) Michael A Repka et al. Expert Opinion on Drug Delivery
- Model predictive control of continuous drum granulation
- (2008) Thomas Glaser et al. JOURNAL OF PROCESS CONTROL
- Analysis of Manufacturing Costs in Pharmaceutical Companies
- (2008) Prabir Basu et al. Journal of Pharmaceutical Innovation
- Improving Pharmaceutical Product Development and Manufacturing: Impact on Cost of Drug Development and Cost of Goods Sold of Pharmaceuticals
- (2008) Pradeep Suresh et al. Journal of Pharmaceutical Innovation
- Process design applied to optimise a directly compressible powder produced via a continuous manufacturing process
- (2007) Y GONNISSEN EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Coprocessing via spray drying as a formulation platform to improve the compactability of various drugs
- (2007) Y. Gonnissen et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Impact milling of pharmaceutical agglomerates in the wet and dry states
- (2007) L SCHENCK et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreDiscover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversation