Reinforced lubrication of vegetable oils with graphene additive in tapping ADC12 aluminum alloy
Published 2017 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Reinforced lubrication of vegetable oils with graphene additive in tapping ADC12 aluminum alloy
Authors
Keywords
Metalworking fluids, Tapping torque, Thread surface, Vegetable oil, Graphene suspensions
Journal
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume 94, Issue 1-4, Pages 1031-1040
Publisher
Springer Nature
Online
2017-08-24
DOI
10.1007/s00170-017-0952-3
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Sustainability in machining: “Eco-friendly” turning of Inconel 718. Surface characterisation and economic analysis
- (2017) Vincenzo Tebaldo et al. JOURNAL OF CLEANER PRODUCTION
- Comparison among different vegetable fluids used in minimum quantity lubrication systems in the tapping process of cast aluminum alloy
- (2017) Sérgio Luiz Moni Ribeiro Filho et al. JOURNAL OF CLEANER PRODUCTION
- The emulsifying and tribological properties of modified graphene oxide in oil-in-water emulsion
- (2017) Yinglei Wu et al. TRIBOLOGY INTERNATIONAL
- Tool wear characterizations in finish turning of AISI 1045 carbon steel for MQCL conditions
- (2017) Radoslaw W. Maruda et al. WEAR
- Investigation of the tribology behaviour of the graphene nanosheets as oil additives on textured alloy cast iron surface
- (2016) Dan Zheng et al. APPLIED SURFACE SCIENCE
- Analysis of the effects of dressing and wheel topography on grinding process under different coolant-lubricant conditions
- (2016) Mohammadjafar Hadad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy
- (2016) Benkai Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization of MQL flow rate for minimum cutting force and surface roughness in end milling of hardened steel (HRC 40)
- (2016) Mozammel Mia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An experimental investigation on effect of minimum quantity cooling lubrication (MQCL) in machining titanium alloy (Ti6Al4V)
- (2016) Salman Pervaiz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Assessing the lubrication performance of vegetable oil-based nano-lubricants for environmentally conscious metal forming processes
- (2016) Behrooz Zareh-Desari et al. JOURNAL OF CLEANER PRODUCTION
- Assessment of cooling-lubrication and wettability characteristics of nano-engineered sunflower oil as cutting fluid and its impact on SQCL grinding performance
- (2016) K. ManojKumar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The Jatropha curcas vegetable base soluble cutting oil as a renewable source in the machining of aluminum alloy 7050-T7451
- (2015) Carlos Alberto Schuch Bork et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Analysis of tapping process in three types of cast iron
- (2015) Igor Cézar Pereira et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning
- (2015) Yu Su et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation of effects of nanofluids on turning of AISI D2 steel using minimum quantity lubrication
- (2015) Puneet Sharma et al. JOURNAL OF CLEANER PRODUCTION
- The effect of ultrasonic vibrations prior to high pressure die-casting of AA7075
- (2015) R. Haghayeghi et al. MATERIALS LETTERS
- Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining
- (2014) Yusuf Kaynak INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Reduced wear and friction enabled by graphene layers on sliding steel surfaces in dry nitrogen
- (2013) Diana Berman et al. CARBON
- Tribological properties of the synthesis of Cu-BTA composite nanoparticles via the thermal decomposition application in lubricants
- (2013) M. J. Kao et al. Electronic Materials Letters
- An investigation on surface grinding of hardened stainless steel S34700 and aluminum alloy AA6061 using minimum quantity of lubrication (MQL) technique
- (2013) Mohammadjafar Hadad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Enhancement of surface finish using water-miscible nano-cutting fluid in ultra-precision turning
- (2013) C.Y. Chan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Few layer graphene to reduce wear and friction on sliding steel surfaces
- (2012) Diana Berman et al. CARBON
- Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process
- (2012) S. A. Lawal et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Dispersion of alkylated graphene in organic solvents and its potential for lubrication applications
- (2012) Shivani Choudhary et al. JOURNAL OF MATERIALS CHEMISTRY
- Application of vegetable oil-based metalworking fluids in machining ferrous metals—A review
- (2011) S.A. Lawal et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Contact line motion and dynamic wetting of nanofluid solutions
- (2008) Khellil Sefiane et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements
- (2008) Bei Peng et al. Nature Nanotechnology
- Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
- (2008) C. Lee et al. SCIENCE
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started