Multipurpose optimization of fuel injection parameters for diesel engine using response surface methodology
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Multipurpose optimization of fuel injection parameters for diesel engine using response surface methodology
Authors
Keywords
-
Journal
Case Studies in Thermal Engineering
Volume -, Issue -, Pages 103718
Publisher
Elsevier BV
Online
2023-11-04
DOI
10.1016/j.csite.2023.103718
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Response surface methodology application on lubricant oil degradation, performance, and emissions in SI engine: A novel optimization of alcoholic fuel blends
- (2023) Muhammad Ali Ijaz Malik et al. SCIENCE PROGRESS
- Comparative Assessment of Ethanol and Methanol–Ethanol Blends with Gasoline in SI Engine for Sustainable Development
- (2023) Muhammad Usman et al. Sustainability
- Acetone–Gasoline Blend as an Alternative Fuel in SI Engines: A Novel Comparison of Performance, Emission, and Lube Oil Degradation
- (2023) Muhammad Usman et al. ACS Omega
- Experimental assessment of performance, emission and lube oil deterioration using gasoline and LPG for a sustainable environment
- (2023) Muhammad Usman et al. Case Studies in Thermal Engineering
- Influence of injection timing on performance, combustion and emission characteristics of a diesel engine running on hydrogen-diethyl ether, n-butanol and biodiesel blends
- (2022) Prem Kumar Chaurasiya et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Use of methanol-gasoline blend: a comparison of SI engine characteristics and lubricant oil condition
- (2022) Muhammad Ali Ijaz Malik et al. JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
- Emerging technologies for biodiesel production: Processes, challenges, and opportunities
- (2022) Arman Amani Babadi et al. BIOMASS & BIOENERGY
- Tribological Analysis of Molybdenum Disulfide (MOS2) Additivated in the Castor and Mineral Oil Used in Diesel Engine
- (2022) Mehmood Ul Hassan et al. Sustainability
- Optimization of Performance and Emission Characteristics of the CI Engine Fueled with Preheated Palm Oil in Blends with Diesel Fuel
- (2022) Iqbal Shajahan Mohamed et al. Sustainability
- Experimental and empirical investigation of a CI engine fuelled with blends of diesel and roselle biodiesel
- (2021) Tikendra Nath Verma et al. Scientific Reports
- Experimental evaluation of methanol-gasoline fuel blend on performance, emissions and lubricant oil deterioration in SI engine
- (2021) Muhammad Ali Ijaz Malik et al. Advances in Mechanical Engineering
- Response Surface Methodology Routed Optimization of Performance of Hydroxy Gas Enriched Diesel Fuel in Compression Ignition Engines
- (2021) Muhammad Usman et al. Processes
- Effect of injection parameters and producer gas derived from redgram stalk on the performance and emission characteristics of a diesel engine
- (2021) K.M. Akkoli et al. Alexandria Engineering Journal
- Parametric study of a single-channel diesel/methanol dual-fuel injector on a diesel engine fueled with directly injected methanol and pilot diesel
- (2021) Zhiyong Li et al. FUEL
- Combustion chamber modifications to improve diesel engine performance and reduce emissions: A review
- (2021) A.T. Doppalapudi et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Analysis of optimising injection parameters and EGR for DICI engine performance powered by lemongrass oil using Box–Behnken (RSM) modelling
- (2021) Sathiyamoorthi Ramalingam et al. International Journal of Ambient Energy
- Effect of injection pressure on the impinging spray and ignition characteristics of the heavy-duty diesel engine under low-temperature conditions
- (2020) Zhicheng Shi et al. APPLIED ENERGY
- Environment-friendly novel fuel additives: Investigation of the effects of graphite nanoparticles on performance and regulated gaseous emissions of CI engine
- (2020) Ammar Ahmed et al. ENERGY CONVERSION AND MANAGEMENT
- An assessment on injection pressure and timing to reduce emissions on diesel engine powered by renewable fuel
- (2020) S.V. Karthic et al. JOURNAL OF CLEANER PRODUCTION
- Experimental investigation on the effect of injector hole number on engine performance and particle number emissions in a light-duty diesel engine
- (2020) Khawar Mohiuddin et al. International Journal of Engine Research
- Optimization of diesel engine operating parameters fueled with palm oil-diesel blend: Comparative evaluation between response surface methodology (RSM) and artificial neural network (ANN)
- (2020) Samet Uslu FUEL
- Study of diesel engine characteristics by adding nanosized zinc oxide and diethyl ether additives in Mahua biodiesel–diesel fuel blend
- (2020) Manzoore Elahi M. Soudagar et al. Scientific Reports
- Experimental & predicative analysis of engine characteristics of various biodiesels
- (2020) Upendra Rajak et al. FUEL
- Heat and mass transfer effects in the nozzle of a fuel injector from the start of needle lift to after the end of injection in the presence of fuel dribble and air entrainment
- (2020) P.G. Aleiferis et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Effects of fuel injection parameters on premixed charge compression ignition combustion and emission characteristics in a medium-duty compression ignition diesel engine
- (2019) Santiago Molina et al. International Journal of Engine Research
- Environmental and enviroeconomic assessment of an LPG fueled SI engine at partial load
- (2019) Habib Gürbüz et al. JOURNAL OF ENVIRONMENTAL MANAGEMENT
- Experimental Studies of Fuel Injection in a Diesel Engine with an Inclined Injector
- (2019) V. G. Kamaltdinov et al. Energies
- Effect of injection pressure and ambient density on spray characteristics of diesel and biodiesel surrogate fuels
- (2019) Meshack Hawi et al. FUEL
- Measurement of performance and emission distinctiveness of Aegle marmelos seed cake pyrolysis oil/diesel/TBHQ opus powered in a DI diesel engine using ANN and RSM
- (2019) P. Baranitharan et al. MEASUREMENT
- Combined effect of fuel injecting timing and nozzle opening pressure of a biogas-biodiesel fuelled diesel engine
- (2019) Naseem Khayum et al. FUEL
- Is it really the end of internal combustion engines and petroleum in transport?
- (2018) Gautam Kalghatgi APPLIED ENERGY
- A numerical and experimental assessment of a coated diesel engine powered by high-performance nano biofuel
- (2018) B. Dhinesh et al. ENERGY CONVERSION AND MANAGEMENT
- Investigation on combustion and emission characteristics of a common rail diesel engine fueled with diesel/n-pentanol/methanol blends
- (2018) Hao Chen et al. ENERGY
- An overview of after-treatment systems for diesel engines
- (2018) Archit Srinivasacharya Ayodhya et al. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
- Numerical investigation of the effect of two-stage injection strategy on combustion and emission characteristics of a diesel engine
- (2017) Hanzhengnan Yu et al. APPLIED ENERGY
- Effect of exhaust gas recirculation on advanced diesel combustion and alternate fuels - A review
- (2016) J. Thangaraja et al. APPLIED ENERGY
- Optimization of biodiesel fueled engine to meet emission standards through varying nozzle opening pressure and static injection timing
- (2014) Balaji Mohan et al. APPLIED ENERGY
- Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions
- (2013) Xavier Tauzia et al. APPLIED ENERGY
- Effect of fuel injection timing and pressure on combustion, emissions and performance characteristics of a single cylinder diesel engine
- (2013) Avinash Kumar Agarwal et al. FUEL
- Fuel injection strategies for performance improvement and emissions reduction in compression ignition engines—A review
- (2013) Balaji Mohan et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel–diesel blend using response surface methodology
- (2011) M. Pandian et al. APPLIED ENERGY
- Influence of injection timing on performance, combustion and emission characteristics of Jatropha biodiesel engine
- (2011) T. Ganapathy et al. APPLIED ENERGY
- Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Jatropha methyl ester
- (2009) S. Jindal et al. APPLIED THERMAL ENGINEERING
- Effects of injection timing on the engine performance and exhaust emissions of a dual-fuel diesel engine
- (2008) Cenk Sayin et al. ENERGY CONVERSION AND MANAGEMENT
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search