On the crashworthiness of thin-walled multi-cell structures and materials: State of the art and prospects
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
On the crashworthiness of thin-walled multi-cell structures and materials: State of the art and prospects
Authors
Keywords
-
Journal
THIN-WALLED STRUCTURES
Volume 189, Issue -, Pages 110734
Publisher
Elsevier BV
Online
2023-06-21
DOI
10.1016/j.tws.2023.110734
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Additively manufactured materials and structures: A state-of-the-art review on their mechanical characteristics and energy absorption
- (2023) Yaozhong Wu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigation of energy absorption characteristics of circular paper tubes under axial impact loading
- (2022) Xiao-Gen Lian et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- A bio-inspired foam-filled multi-cell structural configuration for energy absorption
- (2022) Ruyang Yao et al. COMPOSITES PART B-ENGINEERING
- Load characteristics of triangular honeycomb structures with self-similar hierarchical features
- (2022) Yong Zhang et al. ENGINEERING STRUCTURES
- A new partially-infused fiber reinforced thermoplastic composite for improving impact resistance
- (2022) Jinzhao Huang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Impact properties of uniaxially thermoformed auxetic foams
- (2022) Qicheng Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- In-plane crushing behavior and energy absorption of a novel graded honeycomb from hierarchical architecture
- (2022) Hu Liu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Weight reduction design of multi-material vehicle components using level set-based topology optimization
- (2022) Sunghoon Lim et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Lightweight hybrid materials and structures for energy absorption: A state-of-the-art review and outlook
- (2022) Guangyong Sun et al. THIN-WALLED STRUCTURES
- Current trends in additively manufactured (3D printed) energy absorbing structures for crashworthiness application – a review
- (2022) Chukwuemeke William Isaac et al. Virtual and Physical Prototyping
- Axial crushing response of carbon/glass hybrid composite tubes: An experimental and multi-scale computational study
- (2022) Dongdong Chen et al. COMPOSITE STRUCTURES
- Dynamic behaviors of bio-inspired structures: Design, mechanisms, and models
- (2022) Wen Zhang et al. ENGINEERING STRUCTURES
- Experimental and numerical study on the ballistic impact resistance of the CFRP sandwich panel with the X-frame cores
- (2022) Jie Mei et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Numerical analysis and theoretical studies on the axial compression behavior of multi‐cell Al‐CFRP hybrid tubes
- (2022) Xiaoyu Qin et al. POLYMER COMPOSITES
- Multiobjective and multicollision scenario reliability-based design optimization of honeycomb-filled composite energy-absorbing structures for subways
- (2022) Dongtao Wang et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Investigation into multiaxial mechanical behaviors of Kelvin and Octet-B polymeric closed-cell foams
- (2022) Gang Zheng et al. THIN-WALLED STRUCTURES
- Improving the crashworthiness of bio-inspired multi-cell thin-walled tubes under axial loading: Experimental, numerical, and theoretical studies
- (2022) Mingzhu Jin et al. THIN-WALLED STRUCTURES
- Recent bicycle helmet designs and directions for future research: A comprehensive review from material and structural mechanics aspects
- (2022) Bing Leng et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Finite element modelling and experimentation of plain weave glass/epoxy composites under high strain-rate compression loading for estimation of Johnson-Cook model parameters
- (2022) Shubham et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- High-temperature and dynamic mechanical characterization of closed-cell aluminum foams
- (2022) Erdong Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Energy absorption behaviors and optimization design of thin-walled double-hat beam under bending
- (2022) Bei Zhang et al. THIN-WALLED STRUCTURES
- Energy absorption of metal-composite hybrid tubes with a diamond origami pattern
- (2022) Zhibo Song et al. THIN-WALLED STRUCTURES
- A review of advanced materials, structures and deformation modes for adaptive energy dissipation and structural crashworthiness
- (2022) John Magliaro et al. THIN-WALLED STRUCTURES
- Dynamic Performance and Crashworthiness Assessment of Honeycomb Reinforced Tubular Pipe in the Jacket Platform under Ship Collision
- (2022) Hong Lin et al. Journal of Marine Science and Engineering
- Design and Optimization of an Active Leveling System Actuator for Lunar Lander Application
- (2022) Raffaele Manca et al. Actuators
- Mechanics of textiles used as composite preforms: A review
- (2022) Junbo Xie et al. COMPOSITE STRUCTURES
- Loading rate effect and failure mechanisms of ultra-high-strength steel under mode II fracture
- (2022) Changzeng Fan et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Searching superior crashworthiness performance by constructing variable thickness honeycombs with biomimetic cells
- (2022) Xiang Xu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Low-velocity impact response of aluminum alloy corrugated sandwich beams used for high-speed trains
- (2022) Zhenhao Yu et al. THIN-WALLED STRUCTURES
- Energy absorption of diamond lattice cylindrical shells under axial compression loading
- (2022) Huaiming Zhu et al. THIN-WALLED STRUCTURES
- High-velocity impact resistance of stepwise gradient sandwich beams with metal foam cores
- (2022) Bopeng Fang et al. THIN-WALLED STRUCTURES
- Energy absorption assessment of bio-mimicked hybrid Al/PP sandwich tube: Experimental and Numerical Investigation
- (2022) Moslem Rezaei Faraz et al. THIN-WALLED STRUCTURES
- On safety design of vehicle for protection of vulnerable road users: A review
- (2022) Xiaojiang Lv et al. THIN-WALLED STRUCTURES
- An analytical investigation on the crushing behavior of thin-walled tubes filled with a foam with strain hardening region
- (2022) Seyed Sajad Barzigar et al. THIN-WALLED STRUCTURES
- Isotropic energy absorption of topology optimized lattice structure
- (2022) Sami E. Alkhatib et al. THIN-WALLED STRUCTURES
- An insight from nature: honeycomb pattern in advanced structural design for impact energy absorption
- (2022) Hossein Mohammadi et al. Journal of Materials Research and Technology-JMR&T
- Topology optimization of multi-objective crashworthiness structure based on Improved Bi-directional Evolutionary Structural Optimization
- (2022) Hanzheng Sun Alexandria Engineering Journal
- Dynamic response and energy absorption performance of aluminum foam-filled sandwich circular tubes under internal blast loading
- (2022) Tianhui Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Experimental and numerical investigation on the crashworthiness optimization of thin-walled aluminum tubes considering damage criteria
- (2021) Sinem K. Mert et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Crushing behaviors of horse-hoof-wall inspired corrugated tubes under multiple loading conditions
- (2021) Wen Ma et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Topology optimization of multi-scale structures: a review
- (2021) Jun Wu et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- On multiaxial failure behavior of closed-cell aluminum foams under medium strain rates
- (2021) Erdong Wang et al. THIN-WALLED STRUCTURES
- In-plane dynamic crushing of a novel honeycomb with functionally graded fractal self-similarity
- (2021) Hu Liu et al. COMPOSITE STRUCTURES
- A novel 3D impact energy absorption structure with negative Poisson’s ratio and its application in aircraft crashworthiness
- (2021) Tao Wang et al. COMPOSITE STRUCTURES
- Crushing responses and optimization of novel sandwich columns
- (2021) Huichao Chen et al. COMPOSITE STRUCTURES
- Performance review of various uncoupled fracture criteria for TRIP steel sheet
- (2021) Vivek K. Barnwal et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Density‐Graded Cellular Solids: Mechanics, Fabrication, and Applications
- (2021) Oyindamola Rahman et al. ADVANCED ENGINEERING MATERIALS
- Compression Property of Three-dimensional Honeycomb-structured Fabric Composites
- (2021) Chunhong Zhu et al. APPLIED COMPOSITE MATERIALS
- On the structural parameters of honeycomb-core sandwich panels against low-velocity impact
- (2021) Guangyong Sun et al. COMPOSITES PART B-ENGINEERING
- Impact analysis of a honeycomb-filled motorcycle helmet based on coupled head-helmet modelling
- (2021) Shunfeng Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Energy absorption characteristics of bio-inspired hierarchical multi-cell square tubes under axial crushing
- (2021) Ngoc San Ha et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- On the crashworthiness performance of novel hierarchical multi-cell tubes under axial loading
- (2021) Chao Gong et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Energy absorption prediction and optimization of corrugation-reinforced multicell square tubes based on machine learning
- (2021) Zhixiang Li et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Energy absorption of additively manufactured functionally bi-graded thickness honeycombs subjected to axial loads
- (2021) Yaozhong Wu et al. THIN-WALLED STRUCTURES
- Design, manufacturing and applications of auxetic tubular structures: A review
- (2021) Chen Luo et al. THIN-WALLED STRUCTURES
- A comparative study on the energy absorption mechanism of aluminum/CFRP hybrid beams under quasi-static and dynamic bending
- (2021) Zhixin Huang et al. THIN-WALLED STRUCTURES
- Multi-objective optimization of a multi-cellular aluminum extruded crush rail subjected to dynamic axial and oblique impact loading conditions
- (2021) David N. Booth et al. THIN-WALLED STRUCTURES
- Axial crushing responses of aluminum honeycomb structures filled with elastomeric polyurethane foam
- (2021) Yousef Mohamadi et al. THIN-WALLED STRUCTURES
- Crashworthiness design for multi-cell circumferentially corrugated thin-walled tubes with sub-sections under multiple loading conditions
- (2021) Emre İsa Albak THIN-WALLED STRUCTURES
- Mechanical properties of foam-filled hexagonal and re-entrant honeycombs under uniaxial compression
- (2021) Hui Chen Luo et al. COMPOSITE STRUCTURES
- Advanced honeycomb designs for improving mechanical properties: A review
- (2021) Chang Qi et al. COMPOSITES PART B-ENGINEERING
- A bionic tree-liked fractal structure as energy absorber under axial loading
- (2021) Jiacheng Wu et al. ENGINEERING STRUCTURES
- Crashworthiness improvements of multi-cell thin-walled tubes through lattice structure enhancements
- (2021) Hu Liu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Crashworthiness analysis of bio-inspired fractal tree-like multi-cell circular tubes under axial crushing
- (2021) Ngoc San Ha et al. THIN-WALLED STRUCTURES
- Energy absorption of fully clamped multi-cell square tubes under transverse loading
- (2021) Danfeng Zheng et al. THIN-WALLED STRUCTURES
- Energy absorption performance of hexagonal multi-cell tube with hierarchy under axial loading
- (2021) Ruixian Qin et al. THIN-WALLED STRUCTURES
- Parallelized optimization design of bumper systems under multiple low-speed impact loads
- (2021) Guangyong Sun et al. THIN-WALLED STRUCTURES
- Investigation of Adhesive Joining Strategies for the Application of a Multi-Material Light Rail Vehicle
- (2021) Yiding Liu et al. Materials
- Experimental, numerical and analytical investigations on the elevated strain rate compressive behavior of high-performance PES foam up to 200 s−1
- (2021) Foad Rahimidehgolan et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Strain-rate effect of polymers and correction methodology in a SHPB test
- (2021) F. Liu et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Mechanical characterization and numerical modeling on the yield and fracture behaviors of polymethacrylimide (PMI) foam materials
- (2021) Xintao Huo et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- The effect of loading rate on the compression properties of carbon fibre-reinforced epoxy honeycomb structures
- (2020) Alia R A et al. JOURNAL OF COMPOSITE MATERIALS
- Multi-cell energy-absorbing structures with hollow columns inspired by the beetle elytra
- (2020) Jianxun Du et al. JOURNAL OF MATERIALS SCIENCE
- Dynamic performance of auxetic structures: experiments and simulation
- (2020) Dong Ruan et al. Smart Materials and Structures
- Space mapping-assisted optimization of a thin-walled honeycomb structure for battery packaging
- (2020) Wenquan Shuai et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Development of composite double-hat energy absorber device subjected to traverser loads
- (2020) F. Alkhatib et al. COMPOSITE STRUCTURES
- Response of foam concrete-filled aluminum honeycombs subject to quasi-static and dynamic compression
- (2020) Hongyuan Zhou et al. COMPOSITE STRUCTURES
- Dynamic tensile behaviour of re-entrant honeycombs
- (2020) Jianjun Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Mechanical performance of bio-inspired corrugated tubes with varying vertex configurations
- (2020) Wen Ma et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Energy absorption behaviors of foam-filled holed tube subjected to axial crushing: Experimental and theoretical investigations
- (2020) Ru-Yang Yao et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Crashworthiness of tailored-property multi-cell tubular structures under axial crushing and lateral bending
- (2020) Yaozhong Wu et al. THIN-WALLED STRUCTURES
- A novel multi-cell square tubal structure based on Voronoi tessellation for enhanced crashworthiness
- (2020) Hamza Sulayman Abdullahi et al. THIN-WALLED STRUCTURES
- Crashworthiness analysis of corrugations reinforced multi-cell square tubes
- (2020) Zhixiang Li et al. THIN-WALLED STRUCTURES
- Calculation of Honeycomb Paperboard Resistance to Edge Crush Test
- (2020) Gabriela Kmita-Fudalej et al. Materials
- Numerical-Experimental Correlation of Dynamic Test of a Honeycomb Impact Attenuator for a Formula SAE Vehicle
- (2020) Andrea Vettorello et al. Metals
- A Study on Shock Absorption Characteristics of Honeycomb-Inserted Bollards
- (2020) Sangwon Seon et al. Applied Sciences-Basel
- A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects
- (2020) TianQiao Liu et al. COMPOSITES PART B-ENGINEERING
- Characterization of initial and subsequent yield behaviors of closed-cell aluminum foams under multiaxial loadings
- (2020) Erdong Wang et al. COMPOSITES PART B-ENGINEERING
- Prediction of crack formation in the progressive folding of square tubes during dynamic axial crushing
- (2020) Wenqi Liu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- New advances in fiber-reinforced composite honeycomb materials
- (2020) XingYu Wei et al. Science China-Technological Sciences
- Mechanical properties of combined structures of stacked multilayer Nomex® honeycombs
- (2020) Suchao Xie et al. THIN-WALLED STRUCTURES
- A review on crashworthiness studies of crash box structure
- (2020) N.A.Z. Abdullah et al. THIN-WALLED STRUCTURES
- Creative design for sandwich structures: A review
- (2020) Yixiong Feng et al. International Journal of Advanced Robotic Systems
- A review of numerical analyses and experimental characterization methods for forming of textile reinforcements
- (2020) Biao LIANG et al. Chinese Journal of Aeronautics
- On crashing behaviors of bio-inspired hybrid multi-cell AL/CFRP hierarchical tube under quasi-static loading: An experimental study
- (2020) Liang Ying et al. COMPOSITE STRUCTURES
- Quasi-static crushing behavior of novel re-entrant circular auxetic honeycombs
- (2020) Chang Qi et al. COMPOSITES PART B-ENGINEERING
- Energy absorption and failure pattern of hybrid composite tubes under quasi-static axial compression
- (2020) Haiyang Yang et al. COMPOSITES PART B-ENGINEERING
- A two-stage approach to the optimization design of multi-cell square tubal structures
- (2020) Hamza Sulayman Abdullahi et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Study on the crashworthiness of windowed multi-cell square tubes under axial and oblique impact
- (2020) TrongNhan Tran THIN-WALLED STRUCTURES
- Crushing responses and energy absorption behaviors of multi-cell CFRP tubes
- (2020) Qiang Liu et al. THIN-WALLED STRUCTURES
- Axial crushing of self-lock multi-cell tubes with foam filler and tube envelope
- (2020) Hui Zhang et al. THIN-WALLED STRUCTURES
- Effect of strength matching on failure characteristics of polyurea coated thin metal plates under localized air blast loading: Experiment and numerical analysis
- (2020) Changhai Chen et al. THIN-WALLED STRUCTURES
- Effect of Absorbent Foam Filling on Mechanical Behaviors of 3D-Printed Honeycombs
- (2020) Leilei Yan et al. Polymers
- Axial crushing of Nylon and Al/Nylon hybrid tubes by FDM 3D printing
- (2020) Xinrong Fu et al. COMPOSITE STRUCTURES
- Energy absorption analysis of square-circle hybrid section tubes under axial loading
- (2020) Bingquan Lu et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Crushing behavior of honeycomb vs. foam under combined shear-compression loading
- (2020) Yu Duan et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Crushing characteristic of polygonal tubes with hierarchical triangular cells
- (2020) Shuguang Yao et al. THIN-WALLED STRUCTURES
- Thin-walled corrugated structures: A review of crashworthiness designs and energy absorption characteristics
- (2020) Ngoc San Ha et al. THIN-WALLED STRUCTURES
- Crashworthiness analysis of bionic thin-walled tubes inspired by the evolution laws of plant stems
- (2020) Chao Gong et al. THIN-WALLED STRUCTURES
- Energy absorption of origami inspired structures and materials
- (2020) X.M. Xiang et al. THIN-WALLED STRUCTURES
- Temperature dependent mechanical properties of graphene based carbon honeycombs under tension and compression
- (2020) Jiabao Hu et al. PHYSICS LETTERS A
- Parametric analysis of energy absorption capacity of thin aluminum plates impacted by rigid spherical projectiles
- (2020) Paulo Teixeira et al. THIN-WALLED STRUCTURES
- Energy absorption performance of hybrid cross section tubes under oblique loads
- (2020) Junyuan Zhang et al. THIN-WALLED STRUCTURES
- Crashworthiness of circular fiber reinforced plastic tubes filled with composite skeletons/aluminum foam under drop-weight impact loading
- (2020) Haiyang Yang et al. THIN-WALLED STRUCTURES
- On energy-absorbing mechanisms and structural crashworthiness of laterally crushed thin-walled structures filled with aluminum foam and CFRP skeleton
- (2020) Guohua Zhu et al. THIN-WALLED STRUCTURES
- Design, optimisation and analysis of a helmet made with graded honeycomb structure under impact load
- (2019) Farshid Kholoosi et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Crushing behavior of honeycomb structure: a review
- (2019) Tiju Thomas et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Parametric study of the cross-section shape of aluminium tubes in dynamic three-point bending
- (2019) David Bilston et al. THIN-WALLED STRUCTURES
- Crushing and energy absorption mechanisms of carbon fiber-epoxy tubes under axial impact
- (2019) P.B. Ataabadi et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Deformation and energy absorption analysis of simple and multi-cell thin-walled tubes under quasi-static axial crushing
- (2019) I. Vimal Kannan et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Crushing Behaviors of Fractal Hexagonal Tubular Structures: Experiments and Plastic Analysis
- (2019) Weiwei Li et al. ACTA MECHANICA SOLIDA SINICA
- Static and dynamic axial crushing of Al/CRFP hybrid tubes with single-cell and multi-cell sections
- (2019) Zhixin Huang et al. COMPOSITE STRUCTURES
- Multi-material design of a vehicle body considering crashworthiness safety and social effects
- (2019) Yuan Chen et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Static and dynamic axial crushing of self-locking multi-cell tubes
- (2019) Xiong Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- A crushing analysis and multi-objective optimization of thin-walled five-cell structures
- (2019) Ali Bigdeli et al. THIN-WALLED STRUCTURES
- Axial crushing theory of metal-FRP hybrid square tubes wrapped with antisymmetric angle-ply
- (2019) Junyuan Zhang et al. THIN-WALLED STRUCTURES
- Three-point bending of thin-walled rectangular section tubes with indentation mode
- (2019) Zhixin Huang et al. THIN-WALLED STRUCTURES
- Multi-objective optimisation of a honeycomb-filled composite energy absorber for subway vehicles
- (2019) Ping Xu et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Theoretical prediction and crashworthiness optimization of thin-walled structures with single-box multi-cell section under three-point bending loading
- (2019) Zhanpeng Du et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Energy absorption of thin-walled tubes enhanced by lattice structures
- (2019) Erhan Cetin et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Multi-objective crashworthiness optimization of square and octagonal bitubal structures including different hole shapes
- (2019) Sadjad Pirmohammad et al. THIN-WALLED STRUCTURES
- Metallic tube-reinforced aluminum honeycombs: Compressive and bending performances
- (2019) Yunwei Zhang et al. COMPOSITES PART B-ENGINEERING
- Dynamic perforation of ultra-hard high-strength armor steel: Impact experiments and modeling
- (2019) Teresa Fras et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- The origami inspired optimization design to improve the crashworthiness of a multi-cell thin-walled structure for high speed train
- (2019) Shiming Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Experimental characterisation and numerical modelling of the influence of bondline thickness, loading rate, and deformation mode on the response of ductile adhesive interfaces
- (2019) M. Lißner et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Evaluation of various multi-cell design concepts for crashworthiness design of thin-walled aluminum tubes
- (2019) E. Acar et al. THIN-WALLED STRUCTURES
- Theoretical analysis and crashworthiness optimization of hybrid multi-cell structures
- (2019) Tengteng Chen et al. THIN-WALLED STRUCTURES
- Experimental and theoretical investigations on axial crushing of aluminum foam-filled grooved tube
- (2019) Ru-yang Yao et al. COMPOSITE STRUCTURES
- Energy absorption mechanism of axially-varying thickness (AVT) multicell thin-walled structures under out-of-plane loading
- (2019) Tong Pang et al. ENGINEERING STRUCTURES
- Stress–strain curves of metallic materials and post‐necking strain hardening characterization: A review
- (2019) Shengwen Tu et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Attempt to improve the material utilisation and crashworthiness of grooved tube subjected to axial crushing
- (2019) Ru-Yang Yao et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Crashworthiness analysis and bionic design of multi-cell tubes under axial and oblique impact loads
- (2019) Han Huang et al. THIN-WALLED STRUCTURES
- Crushing behavior of circumferentially corrugated square tube with different cross inner ribs
- (2019) Zhixiang Li et al. THIN-WALLED STRUCTURES
- Crashworthiness and optimization design of quadruple-cell Aluminum/CFRP hybrid tubes under transverse bending
- (2019) Zhixin Huang et al. COMPOSITE STRUCTURES
- Energy-absorbing mechanisms and crashworthiness design of CFRP multi-cell structures
- (2019) Guohua Zhu et al. COMPOSITE STRUCTURES
- A review of recent research on bio-inspired structures and materials for energy absorption applications
- (2019) Ngoc San Ha et al. COMPOSITES PART B-ENGINEERING
- Hybrid multi-cell thin-walled tubes for energy absorption applications: Blast shielding and crashworthiness
- (2019) Mahmoud Abada et al. COMPOSITES PART B-ENGINEERING
- Experimental and numerical studies on the bending collapse of multi-cell Aluminum/CFRP hybrid tubes
- (2019) Zhixin Huang et al. COMPOSITES PART B-ENGINEERING
- Crashworthiness analysis of thin-walled bio-inspired multi-cell corrugated tubes under quasi-static axial loading
- (2019) Wen Ma et al. ENGINEERING STRUCTURES
- Static strength prediction of adhesive joints: A review
- (2019) L.D.C. Ramalho et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Crashworthiness of multi-cell circumferentially corrugated square tubes with cosine and triangular configurations
- (2019) Zhixiang Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Multi-objective optimization of crashworthiness of vehicle front longitudinal beam
- (2019) Hangyan Wang et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- On impacting mechanical behaviors of side fractal structures
- (2019) Yong Zhang et al. THIN-WALLED STRUCTURES
- Energy absorption properties of multi-cell thin-walled tubes with a double surface gradient
- (2019) Junxian Zhou et al. THIN-WALLED STRUCTURES
- Topological design of multi-cell hexagonal tubes under axial and lateral loading cases using a modified particle swarm algorithm
- (2018) Na Qiu et al. APPLIED MATHEMATICAL MODELLING
- Crashworthiness design of novel hierarchical hexagonal columns
- (2018) Xiang Xu et al. COMPOSITE STRUCTURES
- Experimental investigation of the quasi-static axial crushing behavior of filament-wound CFRP and aluminum/CFRP hybrid tubes
- (2018) Guangyong Sun et al. COMPOSITE STRUCTURES
- Numerical and analytical investigation on crushing of fractal-like honeycombs with self-similar hierarchy
- (2018) Dahai Zhang et al. COMPOSITE STRUCTURES
- Characterization of 3D printed long fibre reinforced composites
- (2018) J. Justo et al. COMPOSITE STRUCTURES
- Tidal turbine blade composites - A review on the effects of hygrothermal aging on the properties of CFRP
- (2018) Parvez Alam et al. COMPOSITES PART B-ENGINEERING
- On folding mechanics of multi-cell thin-walled square tubes
- (2018) Zhonggang Wang et al. COMPOSITES PART B-ENGINEERING
- Reinforcements in multi-scale polymer composites: Processing, properties, and applications
- (2018) Garima Mittal et al. COMPOSITES PART B-ENGINEERING
- Crashworthiness optimal design of multi-cell triangular tubes under axial and oblique impact loading
- (2018) TrongNhan Tran et al. ENGINEERING FAILURE ANALYSIS
- A review on functionally graded structures and materials for energy absorption
- (2018) Fengxiang Xu et al. ENGINEERING STRUCTURES
- Topological configuration analysis and design for foam filled multi-cell tubes
- (2018) Guangyong Sun et al. ENGINEERING STRUCTURES
- Approaching perfect energy absorption through structural hierarchy
- (2018) Hualin Fan et al. INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE
- Experimental study on energy absorption of bionic tubes inspired by bamboo structures under axial crushing
- (2018) B.C. Chen et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Dynamic compressive behaviour of cellular materials: A review of phenomenon, mechanism and modelling
- (2018) Yongle Sun et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Dynamic axial crush analysis and design optimization of a square multi-cell thin-walled tube with lateral variable thickness
- (2018) Xueshan Ding et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A more weight-efficient hierarchical hexagonal multi-cell tubular absorber
- (2018) Weiwei Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Crushing analysis for novel bio-inspired hierarchical circular structures subjected to axial load
- (2018) Yong Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Yield surfaces of periodic honeycombs with tunable Poisson's ratio
- (2018) Xiang Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Three-point bending collapse of thin-walled rectangular beams
- (2018) Zhixin Huang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- On hierarchical honeycombs under out-of-plane crushing
- (2018) Jianguang Fang et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Experimental and numerical analysis and multi-objective optimization of quasi-static compressive test on thin-walled cylindrical with internal networking
- (2018) Ali Bigdeli et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Auxetic metamaterials and structures: a review
- (2018) Xin Ren et al. Smart Materials and Structures
- Fracture behaviour of ceramic blocks with thin-walled cellular structures under dynamic loadings
- (2018) Petr Hála et al. THIN-WALLED STRUCTURES
- In-plane and out-of-plane bending responses of aluminum mortise-tenon joints in lightweight electric vehicle inspired by timber structures
- (2018) Qiang Liu et al. THIN-WALLED STRUCTURES
- Experimental and numerical investigation on bending collapse of embedded multi-cell tubes
- (2018) Xiong Zhang et al. THIN-WALLED STRUCTURES
- Crashworthiness optimization of combined straight-tapered tubes using genetic algorithm and neural networks
- (2018) S. Pirmohammad et al. THIN-WALLED STRUCTURES
- Axial crushing of tubes fabricated by metal sheet bending
- (2018) Xiong Zhang et al. THIN-WALLED STRUCTURES
- Energy absorption characteristics of multi-frusta configurations under axial impact loading
- (2018) Ning Gan et al. THIN-WALLED STRUCTURES
- Crashworthiness design for bio-inspired multi-cell tubes with quadrilateral, hexagonal and octagonal sections
- (2018) Linwei Zhang et al. THIN-WALLED STRUCTURES
- Investigation of lateral crushing behaviors of hierarchical quadrangular thin-walled tubular structures
- (2018) Yonghao Luo et al. THIN-WALLED STRUCTURES
- The impact performance of honeycomb-filled structures under eccentric loading for subway vehicles
- (2018) Shuguang Yao et al. THIN-WALLED STRUCTURES
- A novel multi-cell tubal structure with circular corners for crashworthiness
- (2018) Siji Chen et al. THIN-WALLED STRUCTURES
- Energy absorption characteristics of thin aluminium plate against hemispherical nosed projectile impact
- (2018) G. Tiwari et al. THIN-WALLED STRUCTURES
- Energy absorption performance of concentric and multi-cell profiles involving damage evolution criteria
- (2018) Quirino Estrada et al. THIN-WALLED STRUCTURES
- Simplified crashworthiness method of automotive frame for conceptual design
- (2018) Chunyang Gui et al. THIN-WALLED STRUCTURES
- Multi-objective optimization of multi-cell tubes with origami patterns for energy absorption
- (2018) Kai Yang et al. THIN-WALLED STRUCTURES
- Energy absorption and optimization design of multi-cell tubes subjected to lateral indentation
- (2018) Zhixin Huang et al. THIN-WALLED STRUCTURES
- Energy absorbing ability of rectangular self-similar multi-cell sandwich-walled tubular structures
- (2018) Yonghao Luo et al. THIN-WALLED STRUCTURES
- Dynamic crushing response of auxetic honeycombs under large deformation: Theoretical analysis and numerical simulation
- (2018) L.L. Hu et al. THIN-WALLED STRUCTURES
- Experimental testing and numerical analysis of FDM multi-cell inserts and hybrid structures
- (2018) Stefan Tabacu et al. THIN-WALLED STRUCTURES
- Energy absorption of foam-filled multi-cell composite panels under quasi-static compression
- (2018) Jiye Chen et al. COMPOSITES PART B-ENGINEERING
- An analytical model of square CFRP tubes subjected to axial compression
- (2018) Rafea Dakhil Hussein et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Crashworthiness of bionic fractal hierarchical structures
- (2018) Yong Zhang et al. MATERIALS & DESIGN
- Energy absorption analysis for tapered multi-cell tubes improved by foams: Theoretical development and numerical simulation
- (2018) H. Saeidi Googarchin et al. COMPOSITE STRUCTURES
- Dynamic impact response of aluminum honeycombs filled with Expanded Polypropylene foam
- (2018) Yanqin Zhang et al. COMPOSITES PART B-ENGINEERING
- In-plane compressive behavior of graphene-coated aluminum nano-honeycombs
- (2018) Yu Zhou et al. COMPUTATIONAL MATERIALS SCIENCE
- Effect of foam-filling on collapse mode transition of thin-walled circular columns under axial compression: Analytical, numerical and experimental studies
- (2018) Fan Yang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Design for cost performance of crashworthy structures made of high strength steel
- (2018) Guangyong Sun et al. THIN-WALLED STRUCTURES
- Collision performance and multi-objective robust optimization of a combined multi-cell thin-walled structure for high speed train
- (2018) Shiming Wang et al. THIN-WALLED STRUCTURES
- Design of bionic-bamboo thin-walled structures for energy absorption
- (2018) Jie Fu et al. THIN-WALLED STRUCTURES
- Bending collapse of dual rectangle thin-walled tubes for conceptual design
- (2018) Jiantao Bai et al. THIN-WALLED STRUCTURES
- Crushing resistance and energy absorption of pomelo peel inspired hierarchical honeycomb
- (2018) Wen Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Design and characterisation of cellular composite structures for automotive crash-boxes manufactured by out of die ultraviolet cured pultrusion
- (2018) I. Saenz-Dominguez et al. COMPOSITES PART B-ENGINEERING
- A novel multi-cell CFRP/AA6061 hybrid tube and its structural multiobjective optimization
- (2018) Haiyan Yu et al. COMPOSITE STRUCTURES
- Mechanical property of re-entrant anti-trichiral honeycombs under large deformation
- (2018) L.L. Hu et al. COMPOSITES PART B-ENGINEERING
- An updated review of adhesively bonded joints in composite materials
- (2017) S. Budhe et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Optimisation for bending crashworthiness of functionally graded foam-filled cellular structure
- (2017) Hanfeng Yin et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Crashworthiness study for multi-cell composite filling structures
- (2017) Yong Zhang et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Influence of internal pressure on the out-of-plane dynamic behavior of circular-celled honeycombs
- (2017) L.L. Hu et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Testing of a hot stamped axial crush member with tailored properties – Experiments and models
- (2017) Kaab Omer et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- The effect of percent foam fill ratio on the energy absorption capacity of axially compressed thin-walled multi-cell square and circular tubes
- (2017) Murat Altin et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Bending collapse of multi-cell tubes
- (2017) Zong Wang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Experimental and numerical investigation into axial compressive behaviour of thin-walled structures filled with foams and composite skeleton
- (2017) Guohua Zhu et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Crashworthiness analysis of multi-cell square tubes under axial loads
- (2017) Suchao Xie et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Axial crushing of embedded multi-cell tubes
- (2017) Xiong Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Effects of coupling anisotropic yield functions with the optimization process of extruded aluminum front rail geometries in crashworthiness
- (2017) Christopher P. Kohar et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Compressive crushing of novel aluminum hexagonal honeycombs with perforations: Experimental and numerical investigations
- (2017) Zhengjin Wang et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Topology Optimization of Multicell Tubes Under Out-of-Plane Crushing Using a Modified Artificial Bee Colony Algorithm
- (2017) Jianguang Fang et al. JOURNAL OF MECHANICAL DESIGN
- Theoretical prediction and crashworthiness optimization of multi-cell polygonal tubes
- (2017) Hanfeng Yin et al. JOURNAL OF SANDWICH STRUCTURES & MATERIALS
- Plastic analyses of thin-walled steel honeycombs with re-entrant deformation style
- (2017) Zhongxin Zhou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Some comments on the energy-absorbing effectiveness factor
- (2017) Norman Jones PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Crashworthiness investigation of bitubal columns reinforced with several inside ribs under axial and oblique impact loads
- (2017) Sadjad Pirmohammad et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
- Configurational optimization of multi-cell topologies for multiple oblique loads
- (2017) Guangyong Sun et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Crushing analysis and multiobjective optimization design for rectangular unequal triple-cell tubes subjected to axial loading
- (2017) Wen Shen et al. THIN-WALLED STRUCTURES
- Crushing analysis under multiple impact loading cases for multi-cell triangular tubes
- (2017) TrongNhan Tran THIN-WALLED STRUCTURES
- Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact
- (2017) Corin Reuter et al. THIN-WALLED STRUCTURES
- Crashworthiness analysis of octagonal multi-cell tube with functionally graded thickness under multiple loading angles
- (2017) Yafeng Chen et al. THIN-WALLED STRUCTURES
- On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments
- (2017) Ahmad Baroutaji et al. THIN-WALLED STRUCTURES
- Crushing and theoretical analysis of multi-cell thin-walled triangular tubes under lateral loading
- (2017) TrongNhan Tran THIN-WALLED STRUCTURES
- Development of a hot stamped channel section with axially tailored properties – experiments and models
- (2017) Kaab Omer et al. International Journal of Material Forming
- In-plane dynamic crushing and energy absorption capacity of self-similar hierarchical honeycombs
- (2017) Li-qiang An et al. Advances in Mechanical Engineering
- Lateral crushing behaviour and theoretical prediction of thin-walled rectangular and square tubes
- (2016) T.N. Tran et al. COMPOSITE STRUCTURES
- Design, manufacturing and evaluation of glass/polyester composite crash structures for lightweight vehicles
- (2016) A. Esnaola et al. INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY
- Finite element analysis of foam-filled honeycomb structures under impact loading and crashworthiness design
- (2016) Hozhabr Mozafari et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Novel approach for design of 3D-multi-cell thin-walled circular tube to improve the energy absorption characteristics under axial impact loading
- (2016) M. S. Zahran et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Crashworthiness analysis and structural optimisation of multi-cell square tubes under axial and oblique loads
- (2016) Xiang Zou et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- An incremental stress state dependent damage model for ductile failure prediction
- (2016) F. X. C. Andrade et al. INTERNATIONAL JOURNAL OF FRACTURE
- Development of high crush efficient, extrudable aluminium front rails for vehicle lightweighting
- (2016) Christopher P. Kohar et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- On design of multi-cell thin-wall structures for crashworthiness
- (2016) Suzhen Wu et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Plastic collapse of cylindrical shell-plate periodic honeycombs under uniaxial compression: experimental and numerical analyses
- (2016) Qiang Chen et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Bending collapse of folded tubes
- (2016) Xiong Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Theoretical, numerical, and experimental study on laterally variable thickness (LVT) multi-cell tubes for crashworthiness
- (2016) Gang Zheng et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Crushing mechanism of hierarchical lattice structure
- (2016) Fangfang Sun et al. MECHANICS OF MATERIALS
- On design optimization for structural crashworthiness and its state of the art
- (2016) Jianguang Fang et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo
- (2016) Meng Zou et al. THIN-WALLED STRUCTURES
- Theoretical development and numerical investigation on energy absorption behavior of tapered multi-cell tubes
- (2016) A. Mahmoodi et al. THIN-WALLED STRUCTURES
- Axial crushing of aluminum extrusions filled with PET foam and GFRP. An experimental investigation
- (2016) M. Costas et al. THIN-WALLED STRUCTURES
- Influences of different internal stiffeners on energy absorption behavior of square sections during the flattening process
- (2016) Pedram Khanchehzar et al. THIN-WALLED STRUCTURES
- Crushing analysis and multi-objective optimization of a railway vehicle driver's cab
- (2016) Jian Li et al. THIN-WALLED STRUCTURES
- Multi-objective robust optimization of foam-filled bionic thin-walled structures
- (2016) Hanfeng Yin et al. THIN-WALLED STRUCTURES
- Bending resistance of thin-walled multi-cell square tubes
- (2016) Zong Wang et al. THIN-WALLED STRUCTURES
- Theoretical prediction and optimization of multi-cell hexagonal tubes under axial crashing
- (2016) Na Qiu et al. THIN-WALLED STRUCTURES
- Analysis of circular tubes with rectangular multi-cell insert under oblique impact loads
- (2016) Stefan Tabacu THIN-WALLED STRUCTURES
- Crushing behavior of new designed multi-cell members subjected to axial and oblique quasi-static loads
- (2016) S. Pirmohammad et al. THIN-WALLED STRUCTURES
- Crashworthiness design of horsetail-bionic thin-walled structures under axial dynamic loading
- (2016) Youye Xiao et al. International Journal of Mechanics and Materials in Design
- Comparative analysis of energy absorption capacity of polygonal tubes, multi-cell tubes and honeycombs by utilizing key performance indicators
- (2016) Yanfei Xiang et al. MATERIALS & DESIGN
- Quasi-static and dynamic experiments of aluminum honeycombs under combined compression-shear loading
- (2016) ASM Ashab et al. MATERIALS & DESIGN
- In-plane dynamic crushing of re-entrant auxetic cellular structure
- (2016) Wangyu Liu et al. MATERIALS & DESIGN
- Effect of strain rate on the failure mechanisms and energy absorption in polymer composite elements under axial loading
- (2015) Matthew David et al. COMPOSITE STRUCTURES
- Crushing analysis and numerical optimization of angle element structures under axial impact loading
- (2015) TrongNhan Tran et al. COMPOSITE STRUCTURES
- A comparative study of three groups of ductile fracture loci in the 3D space
- (2015) Yuanli Bai et al. ENGINEERING FRACTURE MECHANICS
- Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases
- (2015) Na Qiu et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Development of new deformable barriers for testing vehicle performance in different crash configurations
- (2015) Miguel Sánchez et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Behaviour of Al-Mg-Si alloys at a wide range of temperatures and strain rates
- (2015) V. Vilamosa et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Crashworthiness analysis of multi-cell prismatic structures
- (2015) Annisa Jusuf et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- The crush resistance of four-panel angle elements
- (2015) Xiong Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness
- (2015) Jianguang Fang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Some problems on the axial crushing of multi-cells
- (2015) Xiong Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Flow stress and work-hardening behaviour of Al–Mg binary alloys
- (2015) M. Jobba et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A Survey of Computational Models for Adhesion
- (2015) Roger A. Sauer JOURNAL OF ADHESION
- Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes
- (2015) Peng Wang et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Experimental investigation of the mechanical behavior of aluminum honeycombs under quasi-static and dynamic indentation
- (2015) ASM Ashab et al. MATERIALS & DESIGN
- Design and analysis of a composite energy-absorbing structure for use on railway vehicles
- (2015) Suchao Xie et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT
- Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation
- (2015) Qiancheng Zhang et al. PROGRESS IN MATERIALS SCIENCE
- An adaptive RBF-based multi-objective optimization method for crashworthiness design of functionally graded multi-cell tube
- (2015) Hanfeng Yin et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Multi-objective robust optimization of foam-filled tapered multi-cell thin-walled structures
- (2015) Hanfeng Yin et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Axial crushing of circular structures with rectangular multi-cell insert
- (2015) Stefan Tabacu THIN-WALLED STRUCTURES
- Multiobjective optimization for foam-filled multi-cell thin-walled structures under lateral impact
- (2015) Hanfeng Yin et al. THIN-WALLED STRUCTURES
- On design of multi-cell tubes under axial and oblique impact loads
- (2015) Jianguang Fang et al. THIN-WALLED STRUCTURES
- Study on the collision performance of a composite energy-absorbing structure for subway vehicles
- (2015) Yong Peng et al. THIN-WALLED STRUCTURES
- Crushing analysis and multi-objective optimization design for bionic thin-walled structure
- (2015) Hanfeng Yin et al. MATERIALS & DESIGN
- Design optimization of the S-frame to improve crashworthiness
- (2014) Shu-Tian Liu et al. ACTA MECHANICA SINICA
- Mathematical design of electric vehicle impact attenuators: Metallic vs composite material
- (2014) Simonetta Boria et al. COMPOSITE STRUCTURES
- Impact characteristics of a composite energy absorbing bearing structure for railway vehicles
- (2014) Suchao Xie et al. COMPOSITES PART B-ENGINEERING
- Determination of mechanical properties of the weld line by combining micro-indentation with inverse modeling
- (2014) Guangyong Sun et al. COMPUTATIONAL MATERIALS SCIENCE
- Identification of mechanical properties of the weld line by combining 3D digital image correlation with inverse modeling procedure
- (2014) Guangyao Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Theoretical prediction and crashworthiness optimization of multi-cell square tubes under oblique impact loading
- (2014) TrongNhan Tran et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Crushing analysis and multiobjective optimization for functionally graded foam-filled tubes under multiple load cases
- (2014) Guangyao Li et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Mechanics of anisotropic hierarchical honeycombs
- (2014) R. Oftadeh et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Preparation of density-graded aluminum foam
- (2014) Si-Yuan He et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Optimal Fractal-Like Hierarchical Honeycombs
- (2014) Ramin Oftadeh et al. PHYSICAL REVIEW LETTERS
- Axial crushing and optimal design of square tubes with graded thickness
- (2014) Xiong Zhang et al. THIN-WALLED STRUCTURES
- Theoretical prediction and crashworthiness optimization of multi-cell triangular tubes
- (2014) TrongNhan Tran et al. THIN-WALLED STRUCTURES
- Crashworthiness design of functionally graded foam-filled multi-cell thin-walled structures
- (2014) Hanfeng Yin et al. THIN-WALLED STRUCTURES
- Recent development in aluminium for automotive applications
- (2014) Jürgen HIRSCH TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Theoretical analysis on the collapse mechanisms of thin-walled composite tubes
- (2013) S. Boria et al. COMPOSITE STRUCTURES
- The mechanical properties of natural fibre based honeycomb core materials
- (2013) M.Y.M. Zuhri et al. COMPOSITES PART B-ENGINEERING
- A review on steel/CFRP strengthening systems focusing environmental performance
- (2013) Mehran Gholami et al. CONSTRUCTION AND BUILDING MATERIALS
- Energy absorption limit of plates in thin-walled structures under compression
- (2013) Xiong Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Axial crushing behaviors of multi-cell tubes with triangular lattices
- (2013) Wu Hong et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness
- (2013) Guangyong Sun et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Axial crushing of circular multi-cell columns
- (2013) Xiong Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- A relationship between progressive collapse and initial buckling for tubular structures under axial loading
- (2013) Jie Song et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Non-symmetric deformation of lattices under quasi-static uniaxial compression
- (2013) Jun Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Simulating the Response of a Composite Honeycomb Energy Absorber. I: Dynamic Crushing of Components and Multiterrain Impacts
- (2013) K. E. Jackson et al. JOURNAL OF AEROSPACE ENGINEERING
- Manufacturing and testing of a sandwich panel honeycomb core reinforced with natural-fiber fabrics
- (2013) Ariel Stocchi et al. MATERIALS & DESIGN
- A comparative study on the windowed and multi-cell square tubes under axial and oblique loading
- (2013) Jie Song et al. THIN-WALLED STRUCTURES
- An investigation on the energy absorption characteristics of multi-cell square tubes
- (2013) A. Alavi Nia et al. THIN-WALLED STRUCTURES
- Energy absorption of multi-cell stub columns under axial compression
- (2013) Xiong Zhang et al. THIN-WALLED STRUCTURES
- Crashworthiness optimization design for foam-filled multi-cell thin-walled structures
- (2013) Hanfeng Yin et al. THIN-WALLED STRUCTURES
- Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections
- (2013) A. Alavi Nia et al. THIN-WALLED STRUCTURES
- An experimental investigation into crushing behavior of radially stiffened GFRP composite tubes
- (2013) E. Mahdi et al. THIN-WALLED STRUCTURES
- Functional grading in hierarchical honeycombs: Density specific elastic performance
- (2012) C.M. Taylor et al. COMPOSITE STRUCTURES
- Theoretical and numerical investigation on the crush resistance of rhombic and kagome honeycombs
- (2012) Xiong Zhang et al. COMPOSITE STRUCTURES
- In-plane elastic constants and strengths of circular cell honeycombs
- (2012) Ting-Chun Lin et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Numerical and theoretical studies on energy absorption of three-panel angle elements
- (2012) Xiong Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Effect of cell-wall angle on the in-plane crushing behaviour of hexagonal honeycombs
- (2012) Lingling Hu et al. MATERIALS & DESIGN
- Sequential multiscale analysis on size-dependent mechanical behavior of micro/nano-sized honeycomb structures
- (2012) Joonho Jeong et al. MECHANICS OF MATERIALS
- Quasi-static and dynamic axial crushing of TWCF open-section members
- (2012) Maria Kotelko et al. THIN-WALLED STRUCTURES
- Crushing analysis and multiobjective crashworthiness optimization of tapered square tubes under oblique impact loading
- (2012) Chang Qi et al. THIN-WALLED STRUCTURES
- Analysis of energy absorption characteristics of cylindrical multi-cell columns
- (2012) Zhiliang Tang et al. THIN-WALLED STRUCTURES
- Shock absorption performance of a motorbike helmet with honeycomb reinforced liner
- (2011) Gaetano D. Caserta et al. COMPOSITE STRUCTURES
- Numerical simulation of the crushing process of a corrugated composite plate
- (2011) Vladimir S. Sokolinsky et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Quasi-static axial compression of thin-walled tubes with different cross-sectional shapes
- (2011) Z. Fan et al. ENGINEERING STRUCTURES
- Optimum design for energy absorption of bitubal hexagonal columns with honeycomb core
- (2011) Xiong Zhang et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Crashworthiness design optimisation of metal honeycomb energy absorber used in lunar lander
- (2011) Meng Li et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Steel foam for structures: A review of applications, manufacturing and material properties
- (2011) B.H. Smith et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Combined effects of relative density and material distribution on the mechanical properties of metallic honeycombs
- (2011) H.X. Zhu et al. MECHANICS OF MATERIALS
- Review of uncertainty-based multidisciplinary design optimization methods for aerospace vehicles
- (2011) Wen Yao et al. PROGRESS IN AEROSPACE SCIENCES
- On the behaviour characterization of metallic cellular materials under impact loading
- (2010) Dai-Ning Fang et al. ACTA MECHANICA SINICA
- Design of lightweight multi-material automotive bodies using new material performance indices of thin-walled beams for the material selection with crashworthiness consideration
- (2010) Xintao Cui et al. MATERIALS & DESIGN
- Mechanics of axial plastic collapse in multi-cell, multi-corner crush tubes
- (2010) Ali Najafi et al. THIN-WALLED STRUCTURES
- Improvement of crashworthiness behaviour for simplified structural models of aircraft fuselage
- (2009) F. X. Meng et al. INTERNATIONAL JOURNAL OF CRASHWORTHINESS
- Energy-absorbing effectiveness factor
- (2009) Norman Jones INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Finite element modelling of the progressive crushing of braided composite tubes under axial impact
- (2009) Carla McGregor et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Crashworthiness design for functionally graded foam-filled thin-walled structures
- (2009) Guangyong Sun et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A double-cell foam-filled composite block for efficient energy absorption under axial compression
- (2008) Siavash T. Taher et al. COMPOSITE STRUCTURES
- Strain localization in circular honeycombs under in-plane biaxial quasi-static and low-velocity impact loading
- (2008) D. Karagiozova et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Experimental investigation on the dynamic response of scaled ship model with rubber sandwich coatings subjected to underwater explosion
- (2008) Yong Chen et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- The influence of cell micro-topology on the in-plane dynamic crushing of honeycombs
- (2008) Ying Liu et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Forming severity concept for predicting sheet necking under complex loading histories
- (2008) Yuanli Bai et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Structural optimization of an automobile roof structure using equivalent static loads
- (2008) S-B Jeong et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING
- Numerical modelling of honeycomb core crush behaviour
- (2007) Levent Aktay et al. ENGINEERING FRACTURE MECHANICS
- Dynamic crush behaviors of aluminum honeycomb specimens under compression dominant inclined loads
- (2007) S HONG et al. INTERNATIONAL JOURNAL OF PLASTICITY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now