Energy absorption behaviors and optimization design of thin-walled double-hat beam under bending

Composite Hat Structure Design for Vehicle Safety: Potential Application to B-Pillar and Door Intrusion Beam

(2022) Samer Fakhri Abdulqadir et al.   Materials

A bio-inspired foam-filled multi-cell structural configuration for energy absorption

(2022) Ruyang Yao et al.   COMPOSITES PART B-ENGINEERING

Tabu efficient global optimization with applications in additive manufacturing

(2021) Long Wang et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

On lower confidence bound improvement matrix-based approaches for multiobjective Bayesian optimization and its applications to thin-walled structures

(2021) Guangyong Sun et al.   THIN-WALLED STRUCTURES

Multi-objective optimization design of B-pillar and rocker sub-systems of battery electric vehicle

(2021) Qiqi Li et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Design and optimisation of vehicle frontal bumper beam with alternative carbon fibre-reinforced plastics in corrugated sandwich structure

(2021) Mingzhi Li et al.   INTERNATIONAL JOURNAL OF CRASHWORTHINESS

Design optimization and application of hot-stamped B pillar with local patchwork blanks

(2021) Dongyong Shi et al.   THIN-WALLED STRUCTURES

Parallelized optimization design of bumper systems under multiple low-speed impact loads

(2021) Guangyong Sun et al.   THIN-WALLED STRUCTURES

Crashworthiness and optimization of novel concave thin-walled tubes

(2021) Jianbo Chen et al.   COMPOSITE STRUCTURES

On low-velocity impact response of foam-core sandwich panels

(2020) Xintao Huo et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Numerical Prediction and Reduction of Hat-Shaped Part Springback Made of Dual-Phase AHSS Steel

(2020) Peter Mulidrán et al.   Metals

Experimental and numerical investigations on the quasi-static structural properties of fibre metal laminates processed by thermoforming

(2020) Tobias Fischer et al.   COMPOSITE STRUCTURES

Three-point bending of thin-walled rectangular section tubes with indentation mode

(2019) Zhixin Huang et al.   THIN-WALLED STRUCTURES

Experimental study on the dynamic responses of foam sandwich panels with different facesheets and core gradients subjected to blast impulse

(2019) Guangyong Sun et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Multi-objective crashworthiness optimization of square and octagonal bitubal structures including different hole shapes

(2019) Sadjad Pirmohammad et al.   THIN-WALLED STRUCTURES

Coupled thermal–structural analysis and multi-objective optimization of a cutting-type energy-absorbing structure for subway vehicles

(2019) Junyan Wang et al.   THIN-WALLED STRUCTURES

Computational analysis and optimization of sandwich panels with homogeneous and graded foam cores for blast resistance

(2019) Erdong Wang et al.   THIN-WALLED STRUCTURES

Crashworthiness optimization of VRB thin-walled structures under manufacturing constraints by the eHCA-VRB algorithm

(2019) Libin Duan et al.   APPLIED MATHEMATICAL MODELLING

Quasi-static bending and transverse crushing behaviors for hat-shaped composite tubes made of CFRP, GFRP and their hybrid structures

(2019) Dongdong Chen et al.   COMPOSITE STRUCTURES

Cross-sectional shape design of automobile structure considering rigidity and driver's field of view

(2018) Wenjie Zuo et al.   ADVANCES IN ENGINEERING SOFTWARE

Crashworthiness optimization of automotive parts with tailor rolled blank

(2018) Guangyong Sun et al.   ENGINEERING STRUCTURES

Offline Data-Driven Evolutionary Optimization Using Selective Surrogate Ensembles

(2018) Handing Wang et al.   IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION

Crashworthiness optimization of combined straight-tapered tubes using genetic algorithm and neural networks

(2018) S. Pirmohammad et al.   THIN-WALLED STRUCTURES

Axial crushing of tubes fabricated by metal sheet bending

(2018) Xiong Zhang et al.   THIN-WALLED STRUCTURES

A novel multi-cell tubal structure with circular corners for crashworthiness

(2018) Siji Chen et al.   THIN-WALLED STRUCTURES

Energy absorption and optimization design of multi-cell tubes subjected to lateral indentation

(2018) Zhixin Huang et al.   THIN-WALLED STRUCTURES

Bending characteristics of top-hat structures through tailor rolled blank (TRB) process

(2018) Huile Zhang et al.   THIN-WALLED STRUCTURES

A comparative study on empty and foam-filled hybrid material double-hat beams under lateral impact

(2018) Chang Qi et al.   THIN-WALLED STRUCTURES

Design for cost performance of crashworthy structures made of high strength steel

(2018) Guangyong Sun et al.   THIN-WALLED STRUCTURES

Multi-Objective Bayesian Global Optimization using expected hypervolume improvement gradient

(2018) Kaifeng Yang et al.   Swarm and Evolutionary Computation

Design of bionic-bamboo thin-walled structures for energy absorption

(2018) Jie Fu et al.   THIN-WALLED STRUCTURES

Expected Improvement Matrix-Based Infill Criteria for Expensive Multiobjective Optimization

(2017) Dawei Zhan et al.   IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION

Parameterization of criss-cross configurations for multiobjective crashworthiness optimization

(2017) Guangyong Sun et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Cross-sectional shape optimisation for thin-walled beam crashworthiness with stamping constraints using genetic algorithm

(2017) Jiantao Bai et al.   INTERNATIONAL JOURNAL OF VEHICLE DESIGN

On functionally-graded crashworthy shape of conical structures for multiple load cases

(2017) Tong Pang et al.   Journal of Mechanical Science and Technology

Dynamic axial crashing of tailor-welded blanks (TWBs) thin-walled structures with top-hat shaped section

(2016) Fengxiang Xu et al.   ADVANCES IN ENGINEERING SOFTWARE

Bending analysis and design optimisation of tailor-rolled blank thin-walled structures with top-hat sections

(2016) Libin Duan et al.   INTERNATIONAL JOURNAL OF CRASHWORTHINESS

On design of hybrid material double-hat thin-walled beams under lateral impact

(2016) Chang Qi et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Bending collapse of folded tubes

(2016) Xiong Zhang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

A new RBDO method using adaptive response surface and first-order score function for crashworthiness design

(2016) Lei Shi et al.   RELIABILITY ENGINEERING & SYSTEM SAFETY

On design optimization for structural crashworthiness and its state of the art

(2016) Jianguang Fang et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Crashworthiness design for functionally graded foam-filled bumper beam

(2015) Zhi Xiao et al.   ADVANCES IN ENGINEERING SOFTWARE

Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases

(2015) Na Qiu et al.   FINITE ELEMENTS IN ANALYSIS AND DESIGN

Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness

(2015) Jianguang Fang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

On design of multi-cell tubes under axial and oblique impact loads

(2015) Jianguang Fang et al.   THIN-WALLED STRUCTURES

Parametric analysis and multiobjective optimization for functionally graded foam-filled thin-wall tube under lateral impact

(2014) Jianguang Fang et al.   COMPUTATIONAL MATERIALS SCIENCE

Beam Bounding Box – a novel approach for beam concept modeling and optimization handling

(2012) P. Mihaylova et al.   FINITE ELEMENTS IN ANALYSIS AND DESIGN

A method for selecting surrogate models in crashworthiness optimization

(2012) Lei Shi et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Differential Evolution Algorithm With Strategy Adaptation for Global Numerical Optimization

(2008) A.K. Qin et al.   IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION