Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship
Authors
Keywords
-
Journal
PROGRESS IN MATERIALS SCIENCE
Volume 136, Issue -, Pages 101108
Publisher
Elsevier BV
Online
2023-03-07
DOI
10.1016/j.pmatsci.2023.101108
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- A method to manipulate non-steady-state columnar-to-equiaxed transition in powder bed fusion additive manufacturing using an electron beam
- (2022) Yuchao Lei et al. ACTA MATERIALIA
- Influence of powder characteristics on microstructure and mechanical properties of Inconel 718 superalloy manufactured by direct energy deposition
- (2022) Zhen Wang et al. APPLIED SURFACE SCIENCE
- Defects and anomalies in powder bed fusion metal additive manufacturing
- (2022) Amir Mostafaei et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques
- (2022) Michael P. Haines et al. JOURNAL OF MATERIALS SCIENCE
- Revealing deformation mechanisms in additively manufactured Alloy 718: Cryogenic to elevated temperatures
- (2022) Nabeel Ahmad et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of crack-free Inconel 738 fabricated by laser powder bed fusion
- (2022) Ashutosh Jena et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Multiphysics modeling of particle spattering and induced defect formation mechanism in Inconel 718 laser powder bed fusion
- (2022) Qian Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties
- (2022) Nana Kwabena Adomako et al. MATERIALS & DESIGN
- The Influence of Powder Reuse on the Properties of Nickel Super Alloy ATI 718™ in Laser Powder Bed Fusion Additive Manufacturing
- (2021) Christopher Rock et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- On the determination of residual stresses in additively manufactured lattice structures
- (2021) Tobias Fritsch et al. JOURNAL OF APPLIED CRYSTALLOGRAPHY
- Microstructure and mechanical properties of nickel-based superalloy fabricated by laser powder-bed fusion using recycled powders
- (2021) De-cheng Kong et al. International Journal of Minerals Metallurgy and Materials
- Effect of the scanning strategy on microstructure and mechanical anisotropy of Hastelloy X superalloy produced by Laser Powder Bed Fusion
- (2021) Xuan Zhang et al. MATERIALS CHARACTERIZATION
- Very-High-Cycle Fatigue Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting at Elevated Temperature
- (2021) Zongxian Song et al. Materials
- Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing
- (2021) Yunhui Chen et al. ACTA MATERIALIA
- Scanning Manufacturing Parameters Determining the Residual Stress State in LPBF IN718 Small Parts
- (2021) Itziar Serrano-Munoz et al. ADVANCED ENGINEERING MATERIALS
- Superior tensile properties of Hastelloy X enabled by additive manufacturing
- (2021) Reza Ghiaasiaan et al. Materials Research Letters
- Internal Stress Evolution and Subsurface Phase Transformation in Titanium Parts Manufactured by Laser Powder Bed Fusion – An in situ X‐ray Diffraction Study
- (2021) Felix Schmeiser et al. ADVANCED ENGINEERING MATERIALS
- The Importance of Subsurface Residual Stress in Laser Powder Bed Fusion IN718
- (2021) Itziar Serrano-Munoz et al. ADVANCED ENGINEERING MATERIALS
- Microstructure, cracking behavior and mechanical properties of René 104 superalloy fabricated by selective laser melting
- (2021) Bing Wei et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In-situ alloying in laser-based additive manufacturing processes: A critical review
- (2021) Mohammad Hossein Mosallanejad et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of Heat Treatment on Microstructure and Residual Stress of GH3536 Superalloy Fabricated by Selective Laser Melting
- (2021) Guowen Qiao et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Laser powder bed fusion of advanced submicrometer TiB2 reinforced high-performance Ni-based composite
- (2021) Zhenhua Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Material-structure-performance integrated laser-metal additive manufacturing
- (2021) Dongdong Gu et al. SCIENCE
- The effects of energy density and heat treatment on the microstructure and mechanical properties of laser additive manufactured Haynes 282
- (2021) John Boswell et al. MATERIALS & DESIGN
- Additively manufactured Haynes 282: effect of unimodal vs. bimodal γʹ- microstructure on mechanical properties
- (2021) Reza Ghiaasiaan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of micrometer-sized TiB2 on crack mitigation, mechanical and electrochemical performance of a Ni-based alloy fabricated by selective laser melting
- (2021) Shengzhao Yang et al. OPTICS AND LASER TECHNOLOGY
- An Effective Strengthening Strategy of Nano Carbide Precipitation and Cellular Microstructure Refinement in a Superalloy Fabricated by Selective Laser Melting Process
- (2021) Kai-Chun Chang et al. Metals
- Very High Cycle Fatigue Investigations on the Fatigue Strength of Additive Manufactured and Conventionally Wrought Inconel 718 at 873 K
- (2021) Alexander Schmiedel et al. Metals
- Diffraction-Based Residual Stress Characterization in Laser Additive Manufacturing of Metals
- (2021) Jakob Schröder et al. Metals
- In-Situ Defect Detection in Laser Powder Bed Fusion by Using Thermography and Optical Tomography—Comparison to Computed Tomography
- (2020) Gunther Mohr et al. Metals
- Towards understanding grain nucleation under Additive Manufacturing solidification conditions
- (2020) Arvind Prasad et al. ACTA MATERIALIA
- Heterodyne Eddy Current Testing Using Magnetoresistive Sensors for Additive Manufacturing Purposes
- (2020) Henrik Ehlers et al. IEEE SENSORS JOURNAL
- Investigation of the IN-738 superalloy microstructure and mechanical properties for the manufacturing of gas turbine engine nozzle guide vane by selective laser melting
- (2020) A. V. Sotov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Analytical modeling of part porosity in metal additive manufacturing
- (2020) Jinqiang Ning et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Selective laser melting of Inconel 625 alloy with reduced defect formation
- (2020) Maciej Mazur et al. JOURNAL OF LASER APPLICATIONS
- Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion
- (2020) O. Sanchez-Mata et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Variations in ambient and elevated temperature mechanical behavior of IN718 manufactured by selective laser melting via process parameter control
- (2020) Tait D. McLouth et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
- (2020) Saad A. Khairallah et al. SCIENCE
- Metal 3D printing as a disruptive technology for superalloys
- (2020) Chinnapat Panwisawas et al. Nature Communications
- Further Studies into Crack Growth in Additively Manufactured Materials
- (2020) Athanasios P. Iliopoulos et al. Materials
- Microstructure and Creep Properties of Ni-Base Superalloy IN718 Built up by Selective Laser Melting in a Vacuum Environment
- (2020) Toshiki Nagahari et al. Metals
- Numerical analysis of non-spherical particle effect on molten pool dynamics in laser-powder bed fusion additive manufacturing
- (2020) Xuesong Gao et al. COMPUTATIONAL MATERIALS SCIENCE
- Effects of surface roughness and build thickness on fatigue properties of selective laser melted Inconel 718 at 650 °C
- (2020) H.Y. Wan et al. INTERNATIONAL JOURNAL OF FATIGUE
- The effect of defects and notches in quasi-static and fatigue loading of Inconel 718 specimens produced by selective laser melting
- (2020) Klas Solberg et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue behavior and microstructural evolution of additively manufactured Inconel 718 under cyclic loading at elevated temperature
- (2020) P.D. Nezhadfar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding
- (2020) S. Mohammad H. Hojjatzadeh et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of Co content on the microstructures and mechanical properties of a Ni–Co base superalloy made by specific additive manufacturing process
- (2020) Ling Tang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanistic models for additive manufacturing of metallic components
- (2020) H.L. Wei et al. PROGRESS IN MATERIALS SCIENCE
- A laser powder bed fusion system for in situ x-ray diffraction with high-energy synchrotron radiation
- (2020) Eckart Uhlmann et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Effect of yttrium addition on creep properties of a Ni-base superalloy built up by selective laser melting
- (2020) Koji Kakehi et al. SCRIPTA MATERIALIA
- Review of Laser Powder Bed Fusion of Gamma-Prime-Strengthened Nickel-Based Superalloys
- (2020) Olutayo Adegoke et al. Metals
- Small punch creep performance of heterogeneous microstructure dominated Inconel 718 fabricated by selective laser melting
- (2020) L.Y. Wang et al. MATERIALS & DESIGN
- Microstructure and fatigue crack growth behavior of Inconel 718 superalloy manufactured by laser directed energy deposition
- (2020) Xiaobin Yu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Understanding tensile and creep properties of WC reinforced nickel-based composites fabricated by selective laser melting
- (2020) Hongmei Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy
- (2020) Ming Cao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing
- (2020) J. Logan McNeil et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Investigation of Microstructure and Mechanical Performance of IN738LC Superalloy Thin Wall Produced by Pulsed Plasma Arc Additive Manufacturing
- (2020) Kaibo Wang et al. Materials
- Electron Backscattered Diffraction to Estimate Residual Stress Levels of a Superalloy Produced by Laser Powder Bed Fusion and Subsequent Heat Treatments
- (2020) Mathieu Terner et al. Materials
- The residual stress in as-built Laser Powder Bed Fusion IN718 alloy as a consequence of the scanning strategy induced microstructure
- (2020) Itziar Serrano-Munoz et al. Scientific Reports
- Selective laser melting of Hastelloy X nanocomposite: Effects of TiC reinforcement on crack elimination and strength improvement
- (2020) Quanquan Han et al. COMPOSITES PART B-ENGINEERING
- An investigation into the effects of cyclic strain rate on the high cycle and very high cycle fatigue behaviors of wrought and additively manufactured Inconel 718
- (2020) Muztahid Muhammad et al. INTERNATIONAL JOURNAL OF FATIGUE
- On the influence of heat treatment on microstructure and mechanical behavior of laser powder bed fused Inconel 718
- (2020) Jakob Schröder et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization
- (2019) Laura Cordova et al. JOM
- Microstructural influence on fatigue crack propagation during high cycle fatigue testing of additively manufactured Alloy 718
- (2019) Arun Ramanathan Balachandramurthi et al. MATERIALS CHARACTERIZATION
- Surface modification of binder-jet additive manufactured Inconel 625 via electrospark deposition
- (2019) Pablo D. Enrique et al. SURFACE & COATINGS TECHNOLOGY
- Predicting the Microstructural Evolution of Electron Beam Melting of Alloy 718 with Phase-Field Modeling
- (2019) Chamara Kumara et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Varied heat treatments and properties of laser powder bed printed Inconel 718
- (2019) Runbo Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures
- (2019) Sean Gribbin et al. MATERIALS CHARACTERIZATION
- On the solidification behaviour and cracking origin of a nickel-based superalloy during selective laser melting
- (2019) Chunlei Qiu et al. MATERIALS CHARACTERIZATION
- Fatigue behaviour of additive manufactured materials: An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects
- (2019) Ali Fatemi et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti 6Al 4V alloy
- (2019) Punit Kumar et al. ACTA MATERIALIA
- Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
- (2019) M.J. Bermingham et al. ACTA MATERIALIA
- Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
- (2019) Dongdong Gu et al. COMPOSITES PART B-ENGINEERING
- Multiscale dendritic needle network model of alloy solidification with fluid flow
- (2019) D. Tourret et al. COMPUTATIONAL MATERIALS SCIENCE
- Effect of TiB2 particles on microstructure and crystallographic texture of Al-12Si fabricated by selective laser melting
- (2019) L. Xi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Anomalous Notch Rupture Behavior of Nickel-Based Superalloy Inconel 718 Due to Fabrication by Additive Manufacturing
- (2019) David B. Witkin et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Influence of Process Parameters and Build Orientation on the Creep Behaviour of a Laser Powder Bed Fused Ni-based Superalloy for Aerospace Applications
- (2019) Hani Hilal et al. Materials
- A cellular automaton finite volume method for microstructure evolution during additive manufacturing
- (2019) Yanping Lian et al. MATERIALS & DESIGN
- Nanomechanical Characterization of Laser Peened Additively Manufactured Inconel 718 Superalloy
- (2019) Tyler Palma et al. ADVANCED ENGINEERING MATERIALS
- Influence of substrate characteristics on residual stress of SLMed Inconel 718
- (2019) Yong Cheng et al. RAPID PROTOTYPING JOURNAL
- Cracking during thermal post-processing of laser powder bed fabricated CM247LC Ni-superalloy
- (2019) John H. Boswell et al. MATERIALS & DESIGN
- Laser‐Based Additive Manufacturing Technologies for Aerospace Applications
- (2019) Nick Tepylo et al. ADVANCED ENGINEERING MATERIALS
- Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF
- (2019) Mohamad Bayat et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures
- (2019) Saeede Ghorbanpour et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Oxide and spatter powder formation during laser powder bed fusion of Hastelloy X
- (2019) A.N.D. Gasper et al. POWDER TECHNOLOGY
- Powder-spreading mechanisms in powder-bed-based additive manufacturing: Experiments and computational modeling
- (2019) Hui Chen et al. ACTA MATERIALIA
- Short-term creep behavior of an additive manufactured non-weldable Nickel-base superalloy evaluated by slow strain rate testing
- (2019) Jinghao Xu et al. ACTA MATERIALIA
- Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity
- (2019) J.-R. Poulin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Smooth and notch fatigue behavior of selectively laser melted Inconel 718 with as-built surfaces
- (2019) Gianni Nicoletto INTERNATIONAL JOURNAL OF FATIGUE
- Temperature Profile, Bead Geometry, and Elemental Evaporation in Laser Powder Bed Fusion Additive Manufacturing Process
- (2019) Faiyaz Ahsan et al. JOM
- Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion
- (2019) David B. Witkin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Pore space characteristics and corresponding effect on tensile properties of Inconel 625 fabricated via laser powder bed fusion
- (2019) Mehrnaz Salarian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing
- (2019) Zhen Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The role of texturing and microstructure evolution on the tensile behavior of heat-treated Inconel 625 produced via laser powder bed fusion
- (2019) Giulio Marchese et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental Investigation on the LCF Behavior Affected by Manufacturing Defects and Creep Damage of One Selective Laser Melting Nickel-Based Superalloy at 815 °C
- (2019) Xiao-An Hu et al. Acta Metallurgica Sinica-English Letters
- The effects of stress relieving heat treatment on the microstructure and residual stress of Inconel 718 fabricated by laser metal powder bed fusion additive manufacturing process
- (2019) Xiaoqing Wang et al. Journal of Manufacturing Processes
- Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
- (2019) Xiaoqiang Zhang et al. MATERIALS & DESIGN
- Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing
- (2019) Quanquan Han et al. OPTICS AND LASER TECHNOLOGY
- Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
- (2018) Qilin Guo et al. ACTA MATERIALIA
- Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion
- (2018) Fan Zhang et al. ACTA MATERIALIA
- Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
- (2018) Edouard Chauvet et al. ACTA MATERIALIA
- The role of powder layer thickness on the quality of SLM printed parts
- (2018) Q.B. Nguyen et al. Archives of Civil and Mechanical Engineering
- Predictive modeling capabilities from incident powder and laser to mechanical properties for laser directed energy deposition
- (2018) Yung C. Shin et al. COMPUTATIONAL MECHANICS
- Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections
- (2018) Pengfei Guo et al. CORROSION SCIENCE
- Feedstock powder processing research needs for additive manufacturing development
- (2018) Iver E. Anderson et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Estimation of crack initiation stress and local fracture toughness of Ni-alloys 945X (UNS N09946) and 718 (UNS N07718) under hydrogen environment via fracture surface topography analysis
- (2018) Dhinakaran Sampath et al. ENGINEERING FRACTURE MECHANICS
- Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape
- (2018) A. Yadollahi et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Defect detection in selective laser melting technology by acoustic signals with deep belief networks
- (2018) Dongsen Ye et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of compressive residual stress on short fatigue crack growth in a nickel-based superalloy
- (2018) H.Y. Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions
- (2018) J.-R. Poulin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Single-Track Melt-Pool Measurements and Microstructures in Inconel 625
- (2018) Supriyo Ghosh et al. JOM
- A Review of the Fatigue Properties of Additively Manufactured Ti-6Al-4V
- (2018) Fei Cao et al. JOM
- Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting
- (2018) Xing Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing
- (2018) Neda Mohammadian et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- High-temperature deformation of delta-processed Inconel 718
- (2018) Pedro Páramo-Kañetas et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts
- (2018) Imade Koutiri et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Creep behaviour of inconel 718 processed by laser powder bed fusion
- (2018) Zhengkai Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks
- (2018) Marco Simonelli et al. MATERIALS CHARACTERIZATION
- The effect of boron and zirconium on wrought structure and γ-γ′ lattice misfit characterization in nickel-based superalloy ATI 718Plus
- (2018) Seyed Ali Hosseini et al. MATERIALS CHEMISTRY AND PHYSICS
- Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism
- (2018) Quanquan Han et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion
- (2018) Giulio Marchese et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
- (2018) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Electron beam melting of Inconel 718: effects of processing and post-processing
- (2018) Peeyush Nandwana et al. MATERIALS SCIENCE AND TECHNOLOGY
- The Influence of the Support Structure on Residual Stress and Distortion in SLM Inconel 718 Parts
- (2018) Tatiana Mishurova et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification
- (2018) S. S. Babu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Characterization of Ni-Based Superalloy Built by Selective Laser Melting and Electron Beam Melting
- (2018) Yen-Ling Kuo et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 718
- (2018) Benjamin Shassere et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- High-Temperature Low-Cycle Fatigue Behavior in HAYNES 282: Influence of Initial Microstructure
- (2018) K. Barat et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization
- (2018) G. Chen et al. POWDER TECHNOLOGY
- Jamming during particle spreading in additive manufacturing
- (2018) Wenguang Nan et al. POWDER TECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Producing Ni-base superalloys single crystal by selective electron beam melting
- (2018) Edouard Chauvet et al. SCRIPTA MATERIALIA
- Precipitation and dissolution of δ and γ″ during heat treatment of a laser powder-bed fusion produced Ni-based superalloy
- (2018) Eric A. Lass et al. SCRIPTA MATERIALIA
- Current and future trends in topology optimization for additive manufacturing
- (2018) Jikai Liu et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting
- (2018) Yen-Ling Kuo et al. Materials
- Numerical and experimental study of laser aided additive manufacturing for melt-pool profile and grain orientation analysis
- (2018) Jie Song et al. MATERIALS & DESIGN
- Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
- (2018) Hiroshige Masuo et al. INTERNATIONAL JOURNAL OF FATIGUE
- Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting
- (2018) Yoichi Yamashita et al. INTERNATIONAL JOURNAL OF FATIGUE
- Investigation on Microsegregation of IN718 Alloy During Additive Manufacturing via Integrated Phase-Field and Finite-Element Modeling
- (2018) X. Wang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- On the Tensile Properties of Inconel 718 Fabricated by EBM for As-Built and Heat-Treated Components
- (2018) Laith Abdullah Al-Juboori et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy
- (2018) S.J. Davies et al. MATERIALS & DESIGN
- Microstructure, mechanical properties and cracking behaviour in a γ′-precipitation strengthened nickel-base superalloy fabricated by electron beam melting
- (2018) H. Peng et al. MATERIALS & DESIGN
- X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
- (2018) Anton du Plessis et al. 3D Printing and Additive Manufacturing
- Microstructure simulations of Inconel 718 during selective laser melting using a phase field model
- (2018) Xiaoqing Wang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure, precipitates and mechanical properties of powder bed fused Inconel 718 before and after heat treatment
- (2018) Le Zhou et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Direct laser metal deposition of Inconel 738
- (2018) A. Ramakrishnan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser assisted direct energy deposition of Hastelloy-X
- (2018) A.N. Jinoop et al. OPTICS AND LASER TECHNOLOGY
- Mechanical and tribological behaviors of graphene/Inconel 718 composites
- (2018) Wei-han XIAO et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
- (2018) T. Mukherjee et al. Journal of Manufacturing Processes
- On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
- (2018) Reza Esmaeilizadeh et al. Journal of Manufacturing Processes
- Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel
- (2018) Hahn Choo et al. MATERIALS & DESIGN
- Comparative investigation of small punch creep resistance of Inconel 718 fabricated by selective laser melting
- (2018) L.Y. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire + arc additive manufacture process
- (2018) Xiangfang Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
- (2018) Shang Sui et al. ACTA MATERIALIA
- The effect of powder oxidation on defect formation in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. ACTA MATERIALIA
- Experimental evaluation on elevated temperature fatigue and tensile properties of one selective laser melted nickel based superalloy
- (2018) Z.H. Jiao et al. INTERNATIONAL JOURNAL OF FATIGUE
- Finite element simulation of laser additive melting and solidification of Inconel 718 with experimentally tested thermal properties
- (2017) Richard Andreotta et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Eddy current detection of subsurface defects for additive/subtractive hybrid manufacturing
- (2017) Wei Du et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On cold dwell facet fatigue in titanium alloy aero-engine components
- (2017) M.A. Cuddihy et al. INTERNATIONAL JOURNAL OF FATIGUE
- Occurrence of dynamic strain aging in Alloy 617M under low cycle fatigue loading
- (2017) Vani Shankar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting
- (2017) M.M. Kirka et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of fatigue resistant materials: Challenges and opportunities
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
- (2017) Saeede Ghorbanpour et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Effect of Build Angle on Surface Properties of Nickel Superalloys Processed by Selective Laser Melting
- (2017) Ernesto E. Covarrubias et al. JOM
- Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
- (2017) Ross Cunningham et al. JOM
- Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing
- (2017) Y.L. Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure characterization of recycled IN718 powder and resulting laser clad material
- (2017) Mario Renderos et al. MATERIALS CHARACTERIZATION
- Effects of post-processing on cyclic fatigue response of a titanium alloy additively manufactured by electron beam melting
- (2017) Xiaoli Shui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
- (2017) Mang Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments
- (2017) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
- (2017) Wakshum M. Tucho et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718
- (2017) Shang Sui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Process defects andin situmonitoring methods in metal powder bed fusion: a review
- (2017) Marco Grasso et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing
- (2017) Eric A. Lass et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and strain-stress analysis of the dynamic strain aging in inconel 625 at high temperature
- (2017) P. Maj et al. METALS AND MATERIALS INTERNATIONAL
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting
- (2017) Joon-Phil Choi et al. POWDER TECHNOLOGY
- Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
- (2017) Yen-Ling Kuo et al. SCRIPTA MATERIALIA
- Mitigation of thermal distortion during additive manufacturing
- (2017) T. Mukherjee et al. SCRIPTA MATERIALIA
- In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
- (2017) C. Kenel et al. Scientific Reports
- Influence of Powder Surface Contamination in the Ni-Based Superalloy Alloy718 Fabricated by Selective Laser Melting and Hot Isostatic Pressing
- (2017) Yen-Ling Kuo et al. Metals
- Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments
- (2017) Ahmad Mostafa et al. Metals
- An Overview of Additive Manufacturing of Titanium Components by Directed Energy Deposition: Microstructure and Mechanical Properties
- (2017) Abdollah Saboori et al. Applied Sciences-Basel
- Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties
- (2017) Di Wang et al. MATERIALS & DESIGN
- The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing
- (2017) Yen-Ling Kuo et al. MATERIALS & DESIGN
- Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 718
- (2017) Naresh Nadammal et al. MATERIALS & DESIGN
- Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions
- (2017) Zhuqing Wang et al. MATERIALS & DESIGN
- Characteristics of Inconel Powders for Powder-Bed Additive Manufacturing
- (2017) Quy Bau Nguyen et al. Engineering
- Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing
- (2017) J. Raplee et al. Scientific Reports
- Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
- (2017) Sonny Ly et al. Scientific Reports
- Detecting a Surprisingly Low Transmission Distance in the Early Phase of the 2009 Influenza Pandemic
- (2017) Valentina Marziano et al. Scientific Reports
- Three-dimensional dendritic needle network model for alloy solidification
- (2016) D. Tourret et al. ACTA MATERIALIA
- Denudation of metal powder layers in laser powder bed fusion processes
- (2016) Manyalibo J. Matthews et al. ACTA MATERIALIA
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
- (2016) Saad A. Khairallah et al. ACTA MATERIALIA
- Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
- (2016) Narendran Raghavan et al. ACTA MATERIALIA
- Microstructural Control of Additively Manufactured Metallic Materials
- (2016) P.C. Collins et al. Annual Review of Materials Research
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- Mesoscale modeling and simulation of microstructure evolution during dynamic recrystallization of a Ni-based superalloy
- (2016) Fei Chen et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718
- (2016) Sean Gribbin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Long fatigue crack growth in Inconel 718 produced by selective laser melting
- (2016) R. Konečná et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of hatch spacing on heat and mass transfer, thermodynamics and laser processability during additive manufacturing of Inconel 718 alloy
- (2016) Mujian Xia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Additive manufacturing of metallic components by selective electron beam melting — a review
- (2016) C. Körner INTERNATIONAL MATERIALS REVIEWS
- Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser-Deposited Inconel 718
- (2016) Alex S. Johnson et al. JOM
- Unexpected δ-Phase Formation in Additive-Manufactured Ni-Based Superalloy
- (2016) Y. Idell et al. JOM
- Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties
- (2016) M. M. Kirka et al. JOM
- Predicting Mesoscale Microstructural Evolution in Electron Beam Welding
- (2016) T. M. Rodgers et al. JOM
- Formation of novel graded interface and its function on mechanical properties of WC 1−x reinforced Inconel 718 composites processed by selective laser melting
- (2016) Ting Rong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Simulation of transport phenomena and melt pool shape for multiple layer additive manufacturing
- (2016) Yousub Lee et al. JOURNAL OF LASER APPLICATIONS
- Processability of different IN738LC powder batches by selective laser melting
- (2016) Roman Engeli et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A solidification model for the columnar to equiaxed transition in welding of a Cr-Mo ferritic stainless steel with Ti as inoculant
- (2016) V. Villaret et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A multiscale modeling approach for fast prediction of part distortion in selective laser melting
- (2016) C. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Spatially resolved acoustic spectroscopy for selective laser melting
- (2016) Richard J. Smith et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment
- (2016) V.D. Divya et al. MATERIALS CHARACTERIZATION
- Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting
- (2016) Tanja Trosch et al. MATERIALS LETTERS
- Superior creep strength of a nickel-based superalloy produced by selective laser melting
- (2016) M. Pröbstle et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
- (2016) M.E. Aydinöz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure, texture and elastic anisotropy of the nickel-based superalloy CM247LC processed by selective laser melting
- (2016) R. Muñoz-Moreno et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain structure evolution in Inconel 718 during selective electron beam melting
- (2016) H. Helmer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies
- (2016) Fabian Geiger et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting
- (2016) Michael Cloots et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Process optimisation of selective laser melting using energy density model for nickel based superalloys
- (2016) L. N. Carter et al. MATERIALS SCIENCE AND TECHNOLOGY
- Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
- (2016) Markus Ramsperger et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Empirical Approach to Understanding the Fatigue Behavior of Metals Made Using Additive Manufacturing
- (2016) David B. Witkin et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Additive manufacturing of Ni-based superalloys: The outstanding issues
- (2016) Moataz M. Attallah et al. MRS BULLETIN
- Microhardness and microstructure evolution of TiB2 reinforced Inconel 625/TiB2 composite produced by selective laser melting
- (2016) Baicheng Zhang et al. OPTICS AND LASER TECHNOLOGY
- Surface texture metrology for metal additive manufacturing: a review
- (2016) A. Townsend et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review
- (2016) Babis Schoinochoritis et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components
- (2016) S. Tammas-Williams et al. SCRIPTA MATERIALIA
- Interdiffusion in MCrAlY coated nickel-base superalloys
- (2016) Moritz Elsaß et al. SURFACE & COATINGS TECHNOLOGY
- Effects of tailored gradient interface on wear properties of WC/Inconel 718 composites using selective laser melting
- (2016) Ting Rong et al. SURFACE & COATINGS TECHNOLOGY
- Improved surface of additive manufactured products by coating
- (2016) Shan Yao et al. Journal of Manufacturing Processes
- Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718
- (2016) Yuan Chen et al. MATERIALS & DESIGN
- Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method
- (2016) A. Zinoviev et al. MATERIALS & DESIGN
- Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting
- (2016) B. Ruttert et al. MATERIALS & DESIGN
- Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 625
- (2016) Amir Mostafaei et al. MATERIALS & DESIGN
- Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles
- (2016) Michael Cloots et al. MATERIALS & DESIGN
- Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
- (2016) Galina Kasperovich et al. MATERIALS & DESIGN
- A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder
- (2016) Chongliang Zhong et al. MATERIALS & DESIGN
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Phase-field modeling of microstructure formation during rapid solidification in Inconel 718 superalloy
- (2015) Julia Kundin et al. ACTA MATERIALIA
- Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
- (2015) Neil J. Harrison et al. ACTA MATERIALIA
- Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM)
- (2015) Johannes Strößner et al. ADVANCED ENGINEERING MATERIALS
- Calculation of laser absorption by metal powders in additive manufacturing
- (2015) C. D. Boley et al. APPLIED OPTICS
- Ultrasonic fatigue performance of high temperature structural material Inconel 718 alloys at high temperature after UNSM treatment
- (2015) A. Amanov et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- The Influence of the Melt-Pouring Temperature and Inoculant Content on the Macro and Microstructure of the IN713C Ni-Based Superalloy
- (2015) Hubert Matysiak et al. JOM
- Characterization and Control of Powder Properties for Additive Manufacturing
- (2015) A. Strondl et al. JOM
- Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
- (2015) H. P. Tang et al. JOM
- Cracking behavior and control of Rene 104 superalloy produced by direct laser fabrication
- (2015) Jingjing Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting
- (2015) H.P. Tang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
- (2015) E. Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)
- (2015) Karsten Kunze et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
- (2015) L. M. Sochalski-Kolbus et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting
- (2015) Peeyush Nandwana et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
- (2015) Yanjin Lu et al. OPTICS AND LASER TECHNOLOGY
- A crystal plasticity finite element model for flow stress anomalies in Ni3Al single crystals
- (2015) Shahriyar Keshavarz et al. PHILOSOPHICAL MAGAZINE
- Microstructural aspects of fatigue in Ni-base superalloys
- (2015) S. D. Antolovich PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Evolution of solidification texture during additive manufacturing
- (2015) H. L. Wei et al. Scientific Reports
- Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
- (2015) W. E. King et al. Applied Physics Reviews
- Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain
- (2015) Jason Dawes et al. Johnson Matthey Technology Review
- Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites
- (2015) Pengpeng Yuan et al. MATERIALS & DESIGN
- Analysis and correction of defects within parts fabricated using powder bed fusion technology
- (2015) Jorge Mireles et al. Surface Topography-Metrology and Properties
- Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy
- (2014) Pulin Nie et al. ACTA MATERIALIA
- Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
- (2014) B. Vrancken et al. ACTA MATERIALIA
- Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology
- (2014) G. Ziółkowski et al. Archives of Civil and Mechanical Engineering
- Additive Manufacturing: Making Imagination the Major Limitation
- (2014) Yuwei Zhai et al. JOM
- The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
- (2014) Luke N. Carter et al. JOURNAL OF ALLOYS AND COMPOUNDS
- On Process Temperature in Powder-Bed Electron Beam Additive Manufacturing: Model Development and Validation
- (2014) Bo Cheng et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
- (2014) Gustavo Tapia et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
- (2014) Wayne E. King et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mesoscopic simulation model of selective laser melting of stainless steel powder
- (2014) Saad A. Khairallah et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure
- (2014) Harald Ernst Helmer et al. JOURNAL OF MATERIALS RESEARCH
- On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
- (2014) Stefan Leuders et al. JOURNAL OF MATERIALS RESEARCH
- Resource recycling of superalloys and hydrometallurgical challenges
- (2014) Rajiv Ranjan Srivastava et al. JOURNAL OF MATERIALS SCIENCE
- A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites
- (2014) Milan Ardeljan et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing
- (2014) Guijun Bi et al. MATERIALS & DESIGN
- Evaluation of fracture toughness and impact toughness of laser rapid manufactured Inconel-625 structures and their co-relation
- (2014) Ganesh Puppala et al. MATERIALS & DESIGN
- Microstructural and texture development in direct laser fabricated IN718
- (2014) Lakshmi L. Parimi et al. MATERIALS CHARACTERIZATION
- Fatigue performance evaluation of selective laser melted Ti–6Al–4V
- (2014) P. Edwards et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process
- (2014) Yuan Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Thermodynamic stability and electronic structure of η-Ni6Nb(Al,Ti) from first principles
- (2014) N.C. Eurich et al. SCRIPTA MATERIALIA
- Multiscale dendritic needle network model of alloy solidification
- (2013) D. Tourret et al. ACTA MATERIALIA
- Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
- (2013) L.E. Murr et al. ACTA MATERIALIA
- Oxide films in laser additive manufactured Inconel 718
- (2013) Y.N. Zhang et al. ACTA MATERIALIA
- Computer simulation of phase transformation and plastic deformation in IN718 superalloy: Microstructural evolution during precipitation
- (2013) N. Zhou et al. ACTA MATERIALIA
- Initiation and growth mechanisms for weld solidification cracking
- (2013) N. Coniglio et al. INTERNATIONAL MATERIALS REVIEWS
- Effect of Cooling Rate on the Microstructure of Laser-Remelted INCONEL 718 Coating
- (2013) Yaocheng Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures
- (2013) Chen Hong et al. OPTICS AND LASER TECHNOLOGY
- High temperature material properties of IN738LC processed by selective laser melting (SLM) technology
- (2013) L. Rickenbacher et al. RAPID PROTOTYPING JOURNAL
- Grain refining efficiency and mechanism of pure nickel
- (2013) Tian-Dong Xia et al. RARE METALS
- A Low-Cost Open-Source Metal 3-D Printer
- (2013) Gerald C. Anzalone et al. IEEE Access
- Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
- (2012) K.N. Amato et al. ACTA MATERIALIA
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- The Interdependence Theory: The relationship between grain formation and nucleant selection
- (2011) D.H. StJohn et al. ACTA MATERIALIA
- A novel integrated model combining Cellular Automata and Phase Field methods for microstructure evolution during solidification of multi-component and multi-phase alloys
- (2011) Wenda Tan et al. COMPUTATIONAL MATERIALS SCIENCE
- Balling behavior of stainless steel and nickel powder during selective laser melting process
- (2011) Ruidi Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology
- (2011) Fude Wang INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multiaxial fatigue: An overview and some approximation models for life estimation
- (2011) Ali Fatemi et al. INTERNATIONAL JOURNAL OF FATIGUE
- On-line control of processing atmospheres for proper sintering of oxidation-sensitive PM steels
- (2011) E. Hryha et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In-Situ observation of primary γ′ melting in Ni-base superalloy using confocal laser scanning microscopy
- (2011) M.M. Attallah et al. MATERIALS CHARACTERIZATION
- Alloying Behavior of Ni3M-Type Compounds with D0a Structure
- (2011) H. Sugimura et al. MATERIALS TRANSACTIONS
- Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring
- (2011) Tom Craeghs et al. OPTICS AND LASERS IN ENGINEERING
- Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation
- (2010) S. Biamino et al. INTERMETALLICS
- Mesoscopic simulation of selective beam melting processes
- (2010) Carolin Körner et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Residual stresses in laser direct metal deposited Waspaloy
- (2010) R.J. Moat et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
- (2010) Fencheng Liu et al. OPTICS AND LASER TECHNOLOGY
- Fatigue behavior of laser consolidated IN-625 at room and elevated temperatures
- (2009) A. Theriault et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)
- (2009) A Strondl et al. MATERIALS SCIENCE AND TECHNOLOGY
- Characterization of powder flow: Static and dynamic testing
- (2009) Matthew Krantz et al. POWDER TECHNOLOGY
- Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysis
- (2008) Fujun Wang et al. APPLIED SURFACE SCIENCE
- High-temperature fatigue properties of austenitic superalloys 718, A286 and 304L
- (2008) K KOBAYASHI et al. INTERNATIONAL JOURNAL OF FATIGUE
- Compressive property and energy absorption characteristic of open-cell ZA22 foams
- (2008) Sirong Yu et al. MATERIALS & DESIGN
- The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming
- (2008) Xiaoming Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High density selective laser melting of Waspaloy®
- (2007) Kamran Aamir Mumtaz et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now