Defects and anomalies in powder bed fusion metal additive manufacturing
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Defects and anomalies in powder bed fusion metal additive manufacturing
Authors
Keywords
Additive manufacturing, Powder-related defects, Processing-related defects, Post-processing-related defects, Defect mitigation, Process-structure–property relationship
Journal
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
Volume 26, Issue 2, Pages 100974
Publisher
Elsevier BV
Online
2022-01-22
DOI
10.1016/j.cossms.2021.100974
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Defect-Based Fatigue Life Prediction of L-PBF Additive Manufactured Metals
- (2021) Niloofar Sanaei et al. ENGINEERING FRACTURE MECHANICS
- Effect of the scanning strategy on microstructure and mechanical anisotropy of Hastelloy X superalloy produced by Laser Powder Bed Fusion
- (2021) Xuan Zhang et al. MATERIALS CHARACTERIZATION
- Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges
- (2021) Uwe Zerbst et al. PROGRESS IN MATERIALS SCIENCE
- Toward in-situ flaw detection in laser powder bed fusion additive manufacturing through layerwise imagery and machine learning
- (2021) Zackary Snow et al. JOURNAL OF MANUFACTURING SYSTEMS
- Directional fatigue behaviour of maraging steel grade 300 produced by laser powder bed fusion
- (2021) Klas Solberg et al. INTERNATIONAL JOURNAL OF FATIGUE
- Powder Bed Fusion of nickel-based superalloys: A review
- (2021) Salomé Sanchez et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental investigation into microstructure, mechanical properties, and cracking mechanism of IN713LC processed by laser powder bed fusion
- (2021) M. Mohsin Raza et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental investigation into the effect of supports and overhangs on accuracy and roughness in laser powder bed fusion
- (2021) Mattia Mele et al. OPTICS AND LASER TECHNOLOGY
- Investigation of laser powder bed fusion manufacturing and post-processing for surface quality of as-built 17-4PH stainless steel
- (2021) Kyung-Tae Yang et al. SURFACE & COATINGS TECHNOLOGY
- Effect of the Process Atmosphere Composition on Alloy 718 Produced by Laser Powder Bed Fusion
- (2021) Camille Pauzon et al. Metals
- Quantitative investigation of gas flow, powder-gas interaction, and powder behavior under different ambient pressure levels in laser powder bed fusion
- (2021) Xuxiao Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of surface geometry on laser powder bed fusion defects
- (2021) Alistair Jones et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Hot cracking in ZK60 magnesium alloy produced by laser powder bed fusion process
- (2021) Jinge Liu et al. MATERIALS LETTERS
- Numerical and experimental investigation into gas flow field and spattering phenomena in laser powder bed fusion processing of Inconel 718
- (2021) Cheng-Yen Chien et al. MATERIALS & DESIGN
- Additive manufacturing of heavy rare earth free high-coercivity permanent magnets
- (2020) A.S. Volegov et al. ACTA MATERIALIA
- Effects of crack orientation and heat treatment on fatigue-crack-growth behavior of AM 17-4 PH stainless steel
- (2020) Aref Yadollahi et al. ENGINEERING FRACTURE MECHANICS
- Effect of build location on microstructural characteristics and corrosion behavior of EB-PBF built Alloy 718
- (2020) P. Karimi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser metal deposition of copper on diverse metals using green laser sources
- (2020) Himani Siva Prasad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Supervised deep learning for real-time quality monitoring of laser welding with X-ray radiographic guidance
- (2020) Sergey Shevchik et al. Scientific Reports
- Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing
- (2020) Vivek Thampy et al. Scientific Reports
- Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing
- (2020) M. Kahlin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders
- (2020) Daniel Powell et al. JOURNAL OF CLEANER PRODUCTION
- sAdditive Manufacturing of Magnetic Materials
- (2020) V. Chaudhary et al. PROGRESS IN MATERIALS SCIENCE
- Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
- (2020) Saad A. Khairallah et al. SCIENCE
- High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: Effect of sub-surface porosity and surface roughness
- (2020) Simone Romano et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- In-situ optical emission spectroscopy of selective laser melting
- (2020) Cody S. Lough et al. Journal of Manufacturing Processes
- Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy
- (2020) Vishwanadh Bathula et al. ACTA MATERIALIA
- Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms
- (2020) Ruidi Li et al. ACTA MATERIALIA
- Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L
- (2020) K.M. Bertsch et al. ACTA MATERIALIA
- High-Energy X-Ray Diffraction Microscopy in Materials Science
- (2020) Joel V. Bernier et al. Annual Review of Materials Research
- Pitting corrosion of 17-4PH stainless steel manufactured by laser beam melting
- (2020) Adrien Barroux et al. CORROSION SCIENCE
- Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding
- (2020) S. Mohammad H. Hojjatzadeh et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Thermodynamic Investigation of New High-Strength Low-Alloy Steels with Heusler Phase Strengthening for Welding and Additive Manufacturing: High-Throughput CALPHAD Calculations and Key Experiments for Database Verification
- (2020) Xin Wang et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Investigations on the fracture behavior of Inconel 718 superalloys obtained from cast and additive manufacturing processes
- (2020) B. Vieille et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Melting, fusion and solidification behaviors of Ti-6Al-4V alloy in selective laser melting at different scanning speeds
- (2020) Snehashis Pal et al. RAPID PROTOTYPING JOURNAL
- Influence of Heat Input on the Formation of Laves Phases and Hot Cracking in Plasma Arc Welding (PAW) Additive Manufacturing of Inconel 718
- (2020) Teresa Artaza et al. Metals
- Energy-Coupling Mechanisms Revealed through Simultaneous Keyhole Depth and Absorptance Measurements during Laser-Metal Processing
- (2020) Troy R. Allen et al. Physical Review Applied
- Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: State of the art review
- (2020) R. Acevedo et al. Journal of Materials Research and Technology-JMR&T
- In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing
- (2020) J. Logan McNeil et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Cooling dynamics of two titanium alloys during laser powder bed fusion probed with in situ X-ray imaging and diffraction
- (2020) Nicholas P. Calta et al. MATERIALS & DESIGN
- Invited Review: Machine Learning for Materials Developments in Metals Additive Manufacturing
- (2020) N.S. Johnson et al. Additive Manufacturing
- Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing
- (2020) Zhenlin Xu et al. CORROSION SCIENCE
- Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 °C
- (2020) R. Firoz et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Critical instability at moving keyhole tip generates porosity in laser melting
- (2020) Cang Zhao et al. SCIENCE
- Direct comparison of microstructure-sensitive fatigue crack initiation via crystal plasticity simulations and in situ high-energy X-ray experiments
- (2020) Veerappan Prithivirajan et al. MATERIALS & DESIGN
- A modified El-Haddad model for versatile defect tolerant design
- (2020) Luke Sheridan INTERNATIONAL JOURNAL OF FATIGUE
- Experimental study of effect of post processing on fracture toughness and fatigue crack growth performance of selective laser melting Ti-6Al-4V
- (2019) Haiying ZHANG et al. Chinese Journal of Aeronautics
- Effect of Post-heat Treatment on the Corrosion Behavior of AlSi10Mg Alloy Produced by Additive Manufacturing
- (2019) Amit Zakay et al. JOM
- Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization
- (2019) Laura Cordova et al. JOM
- Alumina loss mechanism of Al2O3-AlSi10 Mg composites during selective laser melting
- (2019) Hailong Liao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property
- (2019) Zhaopeng Tong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Localized Changes of Stainless Steel Powder Characteristics During Selective Laser Melting Additive Manufacturing
- (2019) D. Galicki et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A Comprehensive Study of Steel Powders (316L, H13, P20 and 18Ni300) for Their Selective Laser Melting Additive Manufacturing
- (2019) Jujie Yan et al. Metals
- In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing
- (2019) Sarah J. Wolff et al. Scientific Reports
- Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
- (2019) Ross Cunningham et al. SCIENCE
- Microstructure Development of 308L Stainless Steel During Additive Manufacturing
- (2019) D. W. Brown et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of working environment and built orientation on the tensile properties of selective laser melted AlSi10Mg alloy
- (2019) Srinivasa Rakesh Ch et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the use of 2D moment invariants in the classification of additive manufacturing powder feedstock
- (2019) Ryan Harrison et al. MATERIALS CHARACTERIZATION
- In situ detection of thermally induced porosity in additively manufactured and sintered objects
- (2019) Einat Strumza et al. JOURNAL OF MATERIALS SCIENCE
- Traceable Porosity Measurements in Industrial Components Using X-Ray Computed Tomography
- (2019) Petr Hermanek et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Fine Grains Reduce Cracking Susceptibility During Solidification: Insights from Phase-Field Simulations
- (2019) Ping Jiang et al. JOM
- Crack Paths in Additive Manufactured Metallic Materials Subjected to Multiaxial Cyclic Loads Including Surface Roughness, HIP, and Notch Effects
- (2019) Reza Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds
- (2019) Alexander Kopp et al. Acta Biomaterialia
- Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
- (2019) M.J. Bermingham et al. ACTA MATERIALIA
- Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing
- (2019) Jianchao Ye et al. ADVANCED ENGINEERING MATERIALS
- High-speed X-ray investigation of melt dynamics during continuous-wave laser remelting of selective laser melted Co-Cr alloy
- (2019) Brodan Richter et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Statistical approach for electrochemical evaluation of the effect of heat treatments on the corrosion resistance of AlSi10Mg alloy by laser powder bed fusion
- (2019) M. Cabrini et al. ELECTROCHIMICA ACTA
- From in-situ monitoring toward high-throughput process control: cost-driven decision-making framework for laser-based additive manufacturing
- (2019) Ruholla Jafari-Marandi et al. JOURNAL OF MANUFACTURING SYSTEMS
- Influence of thermal post treatments on microstructure and oxidation behavior of EB-PBF manufactured Alloy 718
- (2019) Esmaeil Sadeghi et al. MATERIALS CHARACTERIZATION
- The effect of sub-grain structure on intergranular corrosion of 316L stainless steel fabricated via selective laser melting
- (2019) Cheng Man et al. MATERIALS LETTERS
- Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts
- (2019) Usman Ali et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An experimental study of residual stress and direction-dependence of fatigue crack growth behaviour in as-built and stress-relieved selective-laser-melted Ti6Al4V
- (2019) Abdul Khadar Syed et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Computed tomography based procedure for reproducible porosity measurement of additive manufactured samples
- (2019) Tomáš Zikmund et al. NDT & E INTERNATIONAL
- Dynamics of pore formation during laser powder bed fusion additive manufacturing
- (2019) Aiden A. Martin et al. Nature Communications
- Influences of tilt angles on microstructure and mechanical properties of 316L stainless steel parts fabricated by selective laser melting (SLM)
- (2019) Cong Ni et al. Materials Research Express
- Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy
- (2019) Wei Xiong et al. MATERIALS & DESIGN
- Coercivity enhancement of selective laser sintered NdFeB magnets by grain boundary infiltration
- (2019) Christian Huber et al. ACTA MATERIALIA
- Laser‐Induced Keyhole Defect Dynamics during Metal Additive Manufacturing
- (2019) Andrew M. Kiss et al. ADVANCED ENGINEERING MATERIALS
- Geometrical metrology for metal additive manufacturing
- (2019) R.K. Leach et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Modified inherent strain method for efficient prediction of residual deformation in direct metal laser sintered components
- (2019) Xuan Liang et al. COMPUTATIONAL MECHANICS
- Effect of post-treatment on the microstructure and high-temperature oxidation behaviour of additively manufactured inconel 718 alloy
- (2019) Yeon-Ji Kang et al. CORROSION SCIENCE
- Analytical evaluation of defect generation for selective laser melting of metals
- (2019) Patcharapit Promoppatum et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of primary processing parameters on surface roughness in laser powder bed additive manufacturing
- (2019) Bo Whip et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Cyclic deformation and fatigue behavior of additively manufactured 17–4 PH stainless steel
- (2019) Luiz Carneiro et al. INTERNATIONAL JOURNAL OF FATIGUE
- Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6Al-4V obtained by additive manufacturing
- (2019) Bastien Vayssette et al. INTERNATIONAL JOURNAL OF FATIGUE
- The influence of additive manufacturing processing parameters on surface roughness and fatigue life
- (2019) Joy Gockel et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment
- (2019) P.D. Nezhadfar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Improving fatigue performances of selective laser melted Al-7Si-0.6Mg alloy via defects control
- (2019) Jeremy H. Rao et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure
- (2019) P.D. Nezhadfar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effects of Recycled Powder on Solidification Defects, Microstructure, and Corrosion Properties of DMLS Fabricated AlSi10Mg
- (2019) M. Rafieazad et al. JOM
- Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
- (2019) Wenhui Yu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of manufacturing geometric defects on the mechanical properties of AlSi10Mg alloy fabricated by selective laser melting
- (2019) Panding Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Increasing keyhole stability of fiber laser welding under reduced ambient pressure
- (2019) Meng Jiang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion
- (2019) Dillon S. Watring et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of fine-grained and dislocation-populated CrMnFeCoNi high entropy alloy by laser engineered net shaping
- (2019) S. Guan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D characterization of defects in deep-powder-bed manufactured Ti–6Al–4V and their influence on tensile properties
- (2019) J. Elambasseril et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718
- (2019) Changhao Pei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dynamic keyhole behavior and keyhole instability in high power fiber laser welding of stainless steel
- (2019) Dabin Zhang et al. OPTICS AND LASER TECHNOLOGY
- Discrete element simulation of powder layer thickness in laser additive manufacturing
- (2019) Quanquan Han et al. POWDER TECHNOLOGY
- The effect of process parameters on the residual stress of selective laser melted Inconel 718 thin-walled part
- (2019) Changpeng Chen et al. RAPID PROTOTYPING JOURNAL
- Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics
- (2019) Nadia Kouraytem et al. Physical Review Applied
- Laser‐Based Additive Manufacturing Technologies for Aerospace Applications
- (2019) Nick Tepylo et al. ADVANCED ENGINEERING MATERIALS
- On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting
- (2019) Majid Laleh et al. CORROSION SCIENCE
- On microstructure and corrosion behaviour of AlSi10Mg alloy with low surface roughness fabricated by direct metal laser sintering
- (2019) P. Fathi et al. CORROSION SCIENCE
- Residual stress prediction in selective laser melting
- (2019) Leonardo Bertini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Towards predicting differences in fatigue performance of laser powder bed fused Ti-6Al-4V coupons from the same build
- (2019) P. Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF
- (2019) Mohamad Bayat et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Methods for Rapid Pore Classification in Metal Additive Manufacturing
- (2019) Robert Snell et al. JOM
- Microstructural control of alloy 718 fabricated by electron beam melting with expanded processing window by adaptive offset method
- (2019) Xiao Ding et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Surface and Subsurface Defects on Fatigue Behavior of AlSi10Mg Alloy Processed by Laser Powder Bed Fusion (L-PBF)
- (2019) Milad Hamidi Nasab et al. Metals
- Powder-spreading mechanisms in powder-bed-based additive manufacturing: Experiments and computational modeling
- (2019) Hui Chen et al. ACTA MATERIALIA
- In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting
- (2019) K. Sofinowski et al. ACTA MATERIALIA
- A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM)
- (2019) Binqi Liu et al. APPLIED MATHEMATICAL MODELLING
- Analytical modeling of lack-of-fusion porosity in metal additive manufacturing
- (2019) Jinqiang Ning et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting
- (2019) V. Cruz et al. CORROSION SCIENCE
- Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing
- (2019) Chengshuang Zhou et al. CORROSION SCIENCE
- Microscale interaction between laser and metal powder in powder-bed additive manufacturing: Conduction mode versus keyhole mode
- (2019) Hongze Wang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Selective laser melting of the hard-to-weld IN738LC superalloy: Efforts to mitigate defects and the resultant microstructural and mechanical properties
- (2019) H. Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: multiscale investigation
- (2019) Bassem Barkia et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Susceptibility of magnesium alloys to solidification cracking
- (2019) Kun Liu et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Defect Prevention in Selective Laser Melting Components: Compositional and Process Effects
- (2019) Hossein Eskandari Sabzi et al. Materials
- Additive manufacturing of fatigue resistant austenitic stainless steels by understanding process-structure–property relationships
- (2019) Jonathan W. Pegues et al. Materials Research Letters
- Solidification-driven orientation gradients in additively manufactured stainless steel
- (2019) Andrew T. Polonsky et al. ACTA MATERIALIA
- Finite interface dissipation phase field modeling of Ni–Nb under additive manufacturing conditions
- (2019) Kubra Karayagiz et al. ACTA MATERIALIA
- Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion
- (2019) David B. Witkin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects
- (2019) J.W. Pegues et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance
- (2019) R. Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Compositionally-tailored steel-based materials manufactured by electron beam melting using blended pre-alloyed powders
- (2019) Andrey Koptyug et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of ultrafine-grained high-strength titanium alloys
- (2019) Duyao Zhang et al. NATURE
- Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
- (2019) Xiaoqiang Zhang et al. MATERIALS & DESIGN
- Melt pool geometry and microstructure of Ti6Al4V with B additions processed by selective laser melting additive manufacturing
- (2019) Yining He et al. MATERIALS & DESIGN
- Improved fracture toughness by microalloying of Fe in Ti-6Al-4V
- (2019) Fuwen Chen et al. MATERIALS & DESIGN
- Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing
- (2019) Majid Laleh et al. CORROSION SCIENCE
- Ultra-fine bimodal (α + β) microstructure induced mechanical strength and corrosion resistance of Ti-6Al-4V alloy produced via laser powder bed fusion process
- (2019) B. Pazhanivel et al. OPTICS AND LASER TECHNOLOGY
- Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing
- (2019) Quanquan Han et al. OPTICS AND LASER TECHNOLOGY
- Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
- (2018) Qilin Guo et al. ACTA MATERIALIA
- Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion
- (2018) Fan Zhang et al. ACTA MATERIALIA
- A simple test for assessing solidification cracking susceptibility and checking validity of susceptibility prediction
- (2018) Tayfun Soysal et al. ACTA MATERIALIA
- Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
- (2018) Edouard Chauvet et al. ACTA MATERIALIA
- Fluid and particle dynamics in laser powder bed fusion
- (2018) P. Bidare et al. ACTA MATERIALIA
- Phase field simulation of powder bed-based additive manufacturing
- (2018) Liang-Xing Lu et al. ACTA MATERIALIA
- Corrosion behaviour of CoCrMo alloy fabricated by electron beam melting
- (2018) Xiaojuan Gong et al. CORROSION SCIENCE
- High temperature oxidation of IN 718 manufactured by laser beam melting and electron beam melting: Effect of surface topography
- (2018) Tom Sanviemvongsak et al. CORROSION SCIENCE
- Corrosion assessment of Ti-6Al-4V fabricated using laser powder-bed fusion additive manufacturing
- (2018) Tse-Ming Chiu et al. ELECTROCHIMICA ACTA
- Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
- (2018) S. Romano et al. ENGINEERING FRACTURE MECHANICS
- Dynamic simulation of powder packing structure for powder bed additive manufacturing
- (2018) Y. S. Lee et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach
- (2018) Haider Ali et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
- (2018) Jonathan Pegues et al. INTERNATIONAL JOURNAL OF FATIGUE
- Strain accumulation and fatigue crack initiation at pores and carbides in a SX superalloy at room temperature
- (2018) R. Jiang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Characterization of molten pool behavior and humping formation tendency in high-speed gas tungsten arc welding
- (2018) Xiangmeng Meng et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A numerical investigation on the physical mechanisms of single track defects in selective laser melting
- (2018) C. Tang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Effect of process parameters on the Selective Laser Melting (SLM) of tungsten
- (2018) Ravi K. Enneti et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Selective laser melting of tungsten and tungsten alloys
- (2018) Aljaž Iveković et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition
- (2018) René Streubel et al. JAPANESE JOURNAL OF APPLIED PHYSICS
- Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys
- (2018) Xiaojia Nie et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Heat treatments effects on functionalization and corrosion behavior of Ti-6Al-4V ELI alloy made by additive manufacturing
- (2018) Guilherme Arthur Longhitano et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fluid dynamical simulation of high speed micro welding
- (2018) Andreas Otto et al. JOURNAL OF LASER APPLICATIONS
- A Computationally Efficient Finite Element Framework to Simulate Additive Manufacturing Processes
- (2018) Shiyan Jayanath et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- From Process Condition to Build Quality through Modeling and Monitoring of In-process Layerwise Images in Laser Powder Bed Fusion Additive Manufacturing Process
- (2018) Farhad Imani et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- In-process Monitoring of Material Cross-Contamination Defects in Laser Powder Bed Fusion
- (2018) Mohammad Montazeri et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Porosity prediction: Supervised-learning of thermal history for direct laser deposition
- (2018) Mojtaba Khanzadeh et al. JOURNAL OF MANUFACTURING SYSTEMS
- Analysis of processing parameters and characteristics of selective laser melted high strength Al-Cu-Mg alloys: From single tracks to cubic samples
- (2018) Xiaojia Nie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Scaling laws for the additive manufacturing
- (2018) Alexander M. Rubenchik et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- General investigations on processing tool steel X40CrMoV5-1 with selective laser melting
- (2018) Julian Krell et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A comparative study on corrosion and microstructure of direct metal laser sintered AlSi10Mg_200C and die cast A360.1 aluminum
- (2018) Parisa Fathi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts
- (2018) Imade Koutiri et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L
- (2018) Rebecca F. Schaller et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718
- (2018) Andrew T. Polonsky et al. MATERIALS CHARACTERIZATION
- Effects of processing defects on the dynamic tensile mechanical behavior of laser-solid-formed Ti-6Al-4 V
- (2018) Peng-Hui Li et al. MATERIALS CHARACTERIZATION
- Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures
- (2018) Michaela Fousová et al. MATERIALS CHARACTERIZATION
- Microstructure and properties of novel AlSi11CuMn alloy manufactured by selective laser melting
- (2018) A.V. Pozdniakov et al. MATERIALS LETTERS
- Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting
- (2018) Tomasz Kurzynowski et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting
- (2018) Yung Suk Jeremy Yoo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V
- (2018) Haider Ali et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting
- (2018) Kun V. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dislocation network in additive manufactured steel breaks strength–ductility trade-off
- (2018) Leifeng Liu et al. Materials Today
- High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained
- (2018) Md. Shamsujjoha et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
- (2018) C. Körner et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Impact of Defects in Powder Feedstock Materials on Microstructure of 304L and 316L Stainless Steel Produced by Additive Manufacturing
- (2018) Benjamin M. Morrow et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A Computational Study on Porosity Evolution in Parts Produced by Selective Laser Melting
- (2018) J. L. Tan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- In situ process monitoring in selective laser sintering using optical coherence tomography
- (2018) Michael R. Gardner et al. OPTICAL ENGINEERING
- Review on thermal analysis in laser-based additive manufacturing
- (2018) Zhaorui Yan et al. OPTICS AND LASER TECHNOLOGY
- A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization
- (2018) G. Chen et al. POWDER TECHNOLOGY
- Jamming during particle spreading in additive manufacturing
- (2018) Wenguang Nan et al. POWDER TECHNOLOGY
- Topography of as built surfaces generated in metal additive manufacturing: A multi scale analysis from form to roughness
- (2018) F. Cabanettes et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes
- (2018) Nicholas P. Calta et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting
- (2018) Kun V. Yang et al. SCRIPTA MATERIALIA
- Signatures of the unique microstructure of additively manufactured steel observed via diffraction
- (2018) R. Pokharel et al. SCRIPTA MATERIALIA
- Additive manufacturing of WC reinforced maraging steel 300 composites by cold spraying and selective laser melting
- (2018) Xingchen Yan et al. SURFACE & COATINGS TECHNOLOGY
- Finite Element Analysis of Interaction of Laser Beam with Material in Laser Metal Powder Bed Fusion Process
- (2018) Guang Fu et al. Materials
- Internal Friction Angle of Metal Powders
- (2018) Jiri Zegzulka et al. Metals
- In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry
- (2018) Philip J. DePond et al. MATERIALS & DESIGN
- Meso-scale modeling of multiple-layer fabrication process in Selective Electron Beam Melting: Inter-layer/track voids formation
- (2018) Wentao Yan et al. MATERIALS & DESIGN
- Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting
- (2018) Decheng Kong et al. MATERIALS & DESIGN
- The printability, microstructure, crystallographic features and microhardness of selective laser melted Inconel 718 thin wall
- (2018) Huihui Yang et al. MATERIALS & DESIGN
- Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring
- (2018) Yingjie Zhang et al. MATERIALS & DESIGN
- Mechanism of porosity formation and influence on mechanical properties in selective laser melting of Ti-6Al-4V parts
- (2018) Jonathan Stef et al. MATERIALS & DESIGN
- Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction
- (2018) Claire Bruna-Rosso et al. MATERIALS & DESIGN
- Forming and defect analysis for single track scanning in selective laser melting of Ti6Al4V
- (2018) Yu Xiang et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Tensile behavior of Ti-6Al-4V alloy fabricated by selective laser melting: effects of microstructures and as-built surface quality
- (2018) Pan Tao et al. China Foundry
- Characterization and oxidation resistance of additive manufactured and forged IN718 Ni-based superalloys
- (2018) C. Juillet et al. CORROSION SCIENCE
- On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting
- (2018) O. Gharbi et al. CORROSION SCIENCE
- Corrosion behavior of laser additive manufactured titanium alloy
- (2018) R. M. Mahamood et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects
- (2018) Reza Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
- (2018) Hiroshige Masuo et al. INTERNATIONAL JOURNAL OF FATIGUE
- Elucidation of keyhole induced bubble formation mechanism in fiber laser welding of low carbon steel
- (2018) Dongsheng Wu et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Overview on Microstructure- and Defect-Sensitive Fatigue Modeling of Additively Manufactured Materials
- (2018) Brian Torries et al. JOM
- Grain boundary and microstructure engineering of Inconel 690 cladding on stainless-steel 316L using electron powder bed fusion additive manufacturing
- (2018) I.A. Segura et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Coupled experimental and computational study of residual stresses in additively manufactured Ti-6Al-4V components
- (2018) M. Strantza et al. MATERIALS LETTERS
- Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
- (2018) Longchao Zhuo et al. MATERIALS LETTERS
- Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations
- (2018) S. J. Foster et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of Microstructure and Surface Roughness on Oxidation Kinetics at 500–600 °C of Ti–6Al–4V Alloy Fabricated by Additive Manufacturing
- (2018) Antoine Casadebaigt et al. OXIDATION OF METALS
- Characterisation Methods for Powder Bed Fusion Processed Surface Topography
- (2018) S. Lou et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Fabrication of Crack-Free Nickel-Based Superalloy Considered Non-Weldable during Laser Powder Bed Fusion
- (2018) Oscar Sanchez-Mata et al. Materials
- Effect of alloy element on weld pool dynamics in laser welding of aluminum alloys
- (2018) Masanori Miyagi et al. Scientific Reports
- Revealing particle-scale powder spreading dynamics in powder-bed-based additive manufacturing process by high-speed x-ray imaging
- (2018) Luis I. Escano et al. Scientific Reports
- Fatigue Behavior of As-Built L-PBF A357.0 Parts
- (2018) Elena Bassoli et al. Metals
- Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions
- (2018) D. Carluccio et al. Journal of Manufacturing Processes
- Ultrafast X-ray imaging of laser–metal additive manufacturing processes
- (2018) Niranjan D. Parab et al. JOURNAL OF SYNCHROTRON RADIATION
- Defects-dictated tensile properties of selective laser melted Ti-6Al-4V
- (2018) Thomas Voisin et al. MATERIALS & DESIGN
- Investigation of Pitting Corrosion Initiation and Propagation of a Type 316L Stainless Steel Manufactured by the Direct Metal Laser Sintering Process
- (2018) Claudia Prieto et al. CORROSION
- Corrosion of Additively Manufactured Alloys: A Review
- (2018) G. Sander et al. CORROSION
- A pragmatic continuum level model for the prediction of the onset of keyholing in laser powder bed fusion
- (2018) A. M. Philo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Defect Identification and Mitigation Via Visual Inspection in Large-Scale Additive Manufacturing
- (2018) Michael Borish et al. JOM
- Selective Laser Melting of 316L Stainless Steel: Physics of Melting Mode Transition and Its Influence on Microstructural and Mechanical Behavior
- (2018) Akash Aggarwal et al. JOM
- Laser additive manufacturing of powdered bismuth telluride
- (2018) Haidong Zhang et al. JOURNAL OF MATERIALS RESEARCH
- Numerical simulation of powder flow during spreading in additive manufacturing
- (2018) Wenguang Nan et al. POWDER TECHNOLOGY
- Comparison of electropolished 316L steel samples manufactured by SLM and traditional technology
- (2018) Edyta Lyczkowska-Widlak et al. RAPID PROTOTYPING JOURNAL
- Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion
- (2018) Le Zhou et al. SCRIPTA MATERIALIA
- Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy
- (2018) Ahmed Maamoun et al. Materials
- Time-Resolved Absorptance and Melt Pool Dynamics during Intense Laser Irradiation of a Metal
- (2018) Brian J. Simonds et al. Physical Review Applied
- Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
- (2018) T. Mukherjee et al. Journal of Manufacturing Processes
- On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
- (2018) Reza Esmaeilizadeh et al. Journal of Manufacturing Processes
- Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel
- (2018) Hahn Choo et al. MATERIALS & DESIGN
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- A high-resolution and large field-of-view scanner for in-line characterization of powder bed defects during additive manufacturing
- (2018) Le Tan Phuc et al. MATERIALS & DESIGN
- Modeling and characterization of cohesion in fine metal powders with a focus on additive manufacturing process simulations
- (2018) Christoph Meier et al. POWDER TECHNOLOGY
- Expanding particle size distribution and morphology of aluminium-silicon powders for Laser Beam Melting by dry coating with silica nanoparticles
- (2018) Michael Cornelius Hermann Karg et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Crack suppression in additively manufactured tungsten by introducing secondary-phase nanoparticles into the matrix
- (2018) Kailun Li et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Investigation of the mechanisms by which hot isostatic pressing improves the fatigue performance of powder bed fused Ti-6Al-4V
- (2018) P. Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of heat treatments on the corrosion mechanism of additive manufactured AlSi10Mg
- (2018) Tim Rubben et al. CORROSION SCIENCE
- The effect of powder oxidation on defect formation in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. ACTA MATERIALIA
- Notch-defect interaction in additively manufactured Inconel 718
- (2018) K. Solberg et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of the focus offset on the defects, microstructure, and mechanical properties of an Inconel 718 superalloy fabricated by electron beam additive manufacturing
- (2018) Hae-Jin Lee et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Critical influences of particle size and adhesion on the powder layer uniformity in metal additive manufacturing
- (2018) Christoph Meier et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The investigation of plume and spatter signatures on melted states in selective laser melting
- (2018) Dongsen Ye et al. OPTICS AND LASER TECHNOLOGY
- Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy
- (2018) Zhen Wang et al. OPTICS AND LASER TECHNOLOGY
- A statistical learning method for image-based monitoring of the plume signature in laser powder bed fusion
- (2018) M. Grasso et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Surface-active element transport and its effect on liquid metal flow in laser-assisted additive manufacturing
- (2017) Zhengtao Gan et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Investigation of remelting and preheating in SLM of 18Ni300 maraging steel as corrective and preventive measures for porosity reduction
- (2017) Ali Gökhan Demir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue properties of a titanium alloy (Ti–6Al–4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress
- (2017) Nikolas Hrabe et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of microstructure [alpha+beta and beta] on very high cycle fatigue behaviour of Ti-6Al-4V alloy
- (2017) Vincenzo Crupi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
- (2017) Daniel Greitemeier et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
- (2017) J. Günther et al. INTERNATIONAL JOURNAL OF FATIGUE
- Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
- (2017) Ming Tang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of fatigue resistant materials: Challenges and opportunities
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes
- (2017) S. Beretta et al. INTERNATIONAL JOURNAL OF FATIGUE
- A three-dimensional numerical simulation model for weld characteristics analysis in fiber laser keyhole welding
- (2017) Yuewei Ai et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy
- (2017) Mujian Xia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Flow behavior of powder particles in layering process of selective laser melting: Numerical modeling and experimental verification based on discrete element method
- (2017) Hui Chen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Using Laser Ultrasound to Detect Subsurface Defects in Metal Laser Powder Bed Fusion Components
- (2017) Sarah Everton et al. JOM
- Influence of Postbuild Microstructure on the Electrochemical Behavior of Additively Manufactured 17-4 PH Stainless Steel
- (2017) M. R. Stoudt et al. JOM
- Review of the Methods for Production of Spherical Ti and Ti Alloy Powder
- (2017) Pei Sun et al. JOM
- Anisotropic Mechanical Behavior of AlSi10Mg Parts Produced by Selective Laser Melting
- (2017) Ming Tang et al. JOM
- Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
- (2017) Ross Cunningham et al. JOM
- Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification
- (2017) Mohsen Seifi et al. JOM
- Prediction of mechanical performance of Ti6Al4V cast alloy based on microCT-based load simulation
- (2017) Anton du Plessis et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing
- (2017) Y.L. Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Grain refinement of wire arc additively manufactured titanium by the addition of silicon
- (2017) S. Mereddy et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Measurement and correlation of isobaric vapour-liquid equilibria for binary systems of 1-(methoxymethoxy)-2-methyl-propane with 1-butanol and isobutanol at 101.33 kPa
- (2017) Yu-He Song et al. JOURNAL OF CHEMICAL THERMODYNAMICS
- Experimental determination of influencing factors on the humping phenomenon during laser micro welding of thin metal sheets
- (2017) Michael Seiler et al. JOURNAL OF LASER APPLICATIONS
- Analysis of laser–melt pool–powder bed interaction during the selective laser melting of a stainless steel
- (2017) Valérie Gunenthiram et al. JOURNAL OF LASER APPLICATIONS
- Influence of Powder Characteristics on Formation of Porosity in Additive Manufacturing of Ti-6Al-4V Components
- (2017) Maurizio Iebba et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Modeling of Powder Bed Manufacturing Defects
- (2017) H.-W. Mindt et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Selective laser melting of TiB 2 /H13 steel nanocomposites: Influence of hot isostatic pressing post-treatment
- (2017) Bandar AlMangour et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)
- (2017) R. Rashid et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Roughness modeling of AlSi10Mg parts fabricated by selective laser melting
- (2017) Alberto Boschetto et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Direction and location dependency of selective laser melted AlSi10Mg specimens
- (2017) Leonhard Hitzler et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of AlSi10Mg: Effects of scan direction, part placement and inert gas flow velocity on tensile strength
- (2017) Ahmad Bin Anwar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)
- (2017) Bartłomiej Wysocki et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
- (2017) E. Liverani et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting
- (2017) G. Sander et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy
- (2017) Nianwei Dai et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot-isostatic pressing, and casting
- (2017) K. Geenen et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- Effect of surface roughness on corrosion fatigue performance of AlSi10Mg alloy produced by Selective Laser Melting (SLM)
- (2017) Avi Leon et al. MATERIALS CHARACTERIZATION
- Comparison on mechanical anisotropies of selective laser melted Ti-6Al-4V alloy and 304 stainless steel
- (2017) Hanchen Yu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing
- (2017) O.G. Rivera et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V
- (2017) Haider Ali et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
- (2017) Mang Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
- (2017) Naor Elad Uzan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Integral method of preparation and fabrication of metal matrix composite: Selective laser melting of in-situ nano/submicro-sized carbides reinforced iron matrix composites
- (2017) Bo Song et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and composition homogeneity, tensile property, and underlying thermal physical mechanism of selective laser melting tool steel parts
- (2017) Hongyu Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments
- (2017) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
- (2017) Wakshum M. Tucho et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder
- (2017) Hamed Asgari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Process defects andin situmonitoring methods in metal powder bed fusion: a review
- (2017) Marco Grasso et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
- (2017) Jingjing Yang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing
- (2017) Eric A. Lass et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Application of Serial Sectioning Microscopy to Additively Manufactured Metallic Samples
- (2017) Michael Chapman et al. MICROSCOPY AND MICROANALYSIS
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Additively manufactured hierarchical stainless steels with high strength and ductility
- (2017) Y. Morris Wang et al. NATURE MATERIALS
- Discrete element simulation and experimental study of powder spreading process in additive manufacturing
- (2017) S. Haeri et al. POWDER TECHNOLOGY
- Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel
- (2017) Mohamad Mahmoudi et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
- (2017) Qi Chao et al. SCRIPTA MATERIALIA
- Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
- (2017) Hu Zhang et al. SCRIPTA MATERIALIA
- Mitigation of thermal distortion during additive manufacturing
- (2017) T. Mukherjee et al. SCRIPTA MATERIALIA
- In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
- (2017) C. Kenel et al. Scientific Reports
- The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
- (2017) S. Tammas-Williams et al. Scientific Reports
- Corrosion Properties of Powder Bed Fusion Additively Manufactured 17-4 PH Stainless Steel
- (2017) Rebecca F. Schaller et al. CORROSION
- Process monitoring and inspection systems in metal additive manufacturing: Status and applications
- (2017) Zhong Yang Chua et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- A Summary of Corrosion Properties of Al-Rich Solid Solution and Secondary Phase Particles in Al Alloys
- (2017) Jichao Li et al. Metals
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V
- (2017) Ross Cunningham et al. Materials Research Letters
- Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
- (2017) A.B. Spierings et al. MATERIALS & DESIGN
- Laser additive manufacturing of iron aluminides strengthened by ordering, borides or coherent Heusler phase
- (2017) Alena Michalcová et al. MATERIALS & DESIGN
- Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode
- (2017) Ting Qi et al. MATERIALS & DESIGN
- Two-dimensional simulation of grain structure growth within selective laser melted AA-2024
- (2017) Omar Lopez-Botello et al. MATERIALS & DESIGN
- In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
- (2017) Umberto Scipioni Bertoli et al. MATERIALS & DESIGN
- Effect of scan pattern on the microstructure and mechanical properties of Powder Bed Fusion additive manufactured 17-4 stainless steel
- (2017) Andelle Kudzal et al. MATERIALS & DESIGN
- Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions
- (2017) Zhuqing Wang et al. MATERIALS & DESIGN
- Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing
- (2017) Hui Xiao et al. MATERIALS & DESIGN
- Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Spatter formation in selective laser melting process using multi-laser technology
- (2017) Mohsen Taheri Andani et al. MATERIALS & DESIGN
- A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion
- (2017) Patcharapit Promoppatum et al. Engineering
- Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing
- (2017) J. Raplee et al. Scientific Reports
- Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
- (2017) Sonny Ly et al. Scientific Reports
- Microstructure and strength of selectively laser melted AlSi10Mg
- (2016) J. Wu et al. ACTA MATERIALIA
- Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
- (2016) Y.J. Liu et al. ACTA MATERIALIA
- Effect of substrate orientation on the formation of equiaxed stray grains in laser surface remelted single crystal superalloys: Experimental investigation
- (2016) L. Wang et al. ACTA MATERIALIA
- Denudation of metal powder layers in laser powder bed fusion processes
- (2016) Manyalibo J. Matthews et al. ACTA MATERIALIA
- Origin of grain orientation during solidification of an aluminum alloy
- (2016) H.L. Wei et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
- (2016) Saad A. Khairallah et al. ACTA MATERIALIA
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- Discrete element modeling of particle-based additive manufacturing processes
- (2016) John C. Steuben et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Effect of Temperature on the Localized Corrosion of AA2024-T3 and the Electrochemistry of Intermetallic Compounds During Exposure to a Dilute NaCl Solution
- (2016) Jichao Li et al. CORROSION
- Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy
- (2016) M. Cabrini et al. ELECTROCHIMICA ACTA
- Analytical modelling of residual stress in additive manufacturing
- (2016) O Fergani et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Sensitivity analysis of material and process parameters in finite element modeling of selective laser melting of Inconel 625
- (2016) Luis E. Criales et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718
- (2016) Sean Gribbin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Long fatigue crack growth in Inconel 718 produced by selective laser melting
- (2016) R. Konečná et al. INTERNATIONAL JOURNAL OF FATIGUE
- Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research
- (2016) P. Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue crack growth behavior and microstructural mechanisms in Ti-6Al-4V manufactured by laser engineered net shaping
- (2016) Yuwei Zhai et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of metallic components by selective electron beam melting — a review
- (2016) C. Körner INTERNATIONAL MATERIALS REVIEWS
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Effects of Powder Attributes and Laser Powder Bed Fusion (L-PBF) Process Conditions on the Densification and Mechanical Properties of 17-4 PH Stainless Steel
- (2016) Harish Irrinki et al. JOM
- Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography
- (2016) Ross Cunningham et al. JOM
- Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing
- (2016) Joseph T. McKeown et al. JOM
- Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
- (2016) Jason R. Trelewicz et al. JOM
- Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser-Deposited Inconel 718
- (2016) Alex S. Johnson et al. JOM
- Overview of Materials Qualification Needs for Metal Additive Manufacturing
- (2016) Mohsen Seifi et al. JOM
- The Influence of As-Built Surface Conditions on Mechanical Properties of Ti-6Al-4V Additively Manufactured by Selective Electron Beam Melting
- (2016) Y. Y. Sun et al. JOM
- Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks
- (2016) Brian L. DeCost et al. JOM
- Rapid Solidification: Selective Laser Melting of AlSi10Mg
- (2016) Ming Tang et al. JOM
- Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling
- (2016) Yuan Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigations of welding instabilities and weld seam formation during laser microwelding of ultrathin metal sheets
- (2016) Michael Seiler et al. JOURNAL OF LASER APPLICATIONS
- Simulation of Forming Process of Powder Bed for Additive Manufacturing
- (2016) Zhaowei Xiang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Simulating Melt Pool Shape and Lack of Fusion Porosity for Selective Laser Melting of Cobalt Chromium Components
- (2016) Chong Teng et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Changing the alloy composition of Al7075 for better processability by selective laser melting
- (2016) Maria L. Montero-Sistiaga et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Evaluation of corrosion resistance of Al–10Si–Mg alloy obtained by means of Direct Metal Laser Sintering
- (2016) Marina Cabrini et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Finite-element analysis and experimental validation of thermal residual stress and distortion in electron beam additive manufactured Ti-6Al-4V build plates
- (2016) Jun Cao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On the formation of AlSi10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties
- (2016) Nesma T. Aboulkhair et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In situ morphology-based defect detection of selective laser melting through inline coherent imaging
- (2016) Jordan A. Kanko et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Grain morphology control and texture characterization of laser solid formed Ti6Al2Sn2Zr3Mo1.5Cr2Nb titanium alloy
- (2016) Q. Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting
- (2016) R. Casati et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Local Corrosion Behavior of Additive Manufactured AlSiMg Alloy Assessed by SEM and SKPFM
- (2016) Reynier I. Revilla et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment
- (2016) V.D. Divya et al. MATERIALS CHARACTERIZATION
- Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718
- (2016) Derek H. Smith et al. MATERIALS CHARACTERIZATION
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting
- (2016) Tanja Trosch et al. MATERIALS LETTERS
- In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders
- (2016) M. Fischer et al. Materials Science & Engineering C-Materials for Biological Applications
- Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
- (2016) Amanda J. Sterling et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
- (2016) M.E. Aydinöz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Damage evolution and failure mechanisms in additively manufactured stainless steel
- (2016) Holly D. Carlton et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolutions and nucleation mechanisms of dynamic recrystallization of a powder metallurgy Ni-based superalloy during hot compression
- (2016) Guoai He et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material
- (2016) Arne Röttger et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain structure evolution in Inconel 718 during selective electron beam melting
- (2016) H. Helmer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties
- (2016) Hu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
- (2016) Nesma T. Aboulkhair et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting
- (2016) G. Miranda et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of additive manufactured, powder-bed laser-fused materials
- (2016) Todd M. Mower et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V
- (2016) D. Greitemeier et al. MATERIALS SCIENCE AND TECHNOLOGY
- X-ray computed tomography for additive manufacturing: a review
- (2016) A Thompson et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Correlation of Thermally Induced Pores with Microstructural Features Using High Energy X-rays
- (2016) David B. Menasche et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Process Optimization of Dual-Laser Beam Welding of Advanced Al-Li Alloys Through Hot Cracking Susceptibility Modeling
- (2016) Yingtao Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
- (2016) Markus Ramsperger et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting
- (2016) Samuel Tammas-Williams et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Particle-based simulation of powder application in additive manufacturing
- (2016) Eric J.R. Parteli et al. POWDER TECHNOLOGY
- Surface texture metrology for metal additive manufacturing: a review
- (2016) A. Townsend et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Direct laser deposition of Ti-6Al-4V from elemental powder blends
- (2016) Lei Yan et al. RAPID PROTOTYPING JOURNAL
- Utilization of a microstructure sensitive fatigue model for additively manufactured Ti-6Al-4V
- (2016) Brian Torries et al. RAPID PROTOTYPING JOURNAL
- Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components
- (2016) S. Tammas-Williams et al. SCRIPTA MATERIALIA
- Corrosion resistance of direct metal laser sintering AlSiMg alloy
- (2016) M. Cabrini et al. SURFACE AND INTERFACE ANALYSIS
- Fatigue behaviour of selective laser melting steel components
- (2016) L.M.S. Santos et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Effect of Temperature on the Localized Corrosion of AA2024-T3 and the Electrochemistry of Intermetallic Compounds During Exposure to a Dilute NaCl Solution
- (2016) Jichao Li et al. CORROSION
- Synchrotron X-ray CT characterization of titanium parts fabricated by additive manufacturing. Part II. Defects
- (2016) Nicola Vivienne Yorke Scarlett et al. JOURNAL OF SYNCHROTRON RADIATION
- Strength and plasticity of nanolaminated materials
- (2016) Jian Wang et al. Materials Research Letters
- Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
- (2016) Khairul Amilin Ibrahim et al. MATERIALS & DESIGN
- Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
- (2016) Nesma T. Aboulkhair et al. MATERIALS & DESIGN
- 3D imaging and quantification of porosity in electron beam welded dissimilar steel to Fe-Al alloy joints by X-ray tomography
- (2016) Soumitra Kumar Dinda et al. MATERIALS & DESIGN
- Reducing lack of fusion during selective laser melting of CoCrMo alloy: Effect of laser power on geometrical features of tracks
- (2016) K. Darvish et al. MATERIALS & DESIGN
- Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology
- (2016) Alejandro Hinojos et al. MATERIALS & DESIGN
- Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting
- (2016) Xiaoli Zhao et al. MATERIALS & DESIGN
- Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy
- (2016) Jingjing Yang et al. MATERIALS & DESIGN
- Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development
- (2016) U. Tradowsky et al. MATERIALS & DESIGN
- Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718
- (2016) Yuan Chen et al. MATERIALS & DESIGN
- Nanocrystalline TiC-reinforced H13 steel matrix nanocomposites fabricated by selective laser melting
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting
- (2016) H. Schwab et al. MATERIALS & DESIGN
- Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles
- (2016) Michael Cloots et al. MATERIALS & DESIGN
- Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
- (2016) Galina Kasperovich et al. MATERIALS & DESIGN
- A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder
- (2016) Chongliang Zhong et al. MATERIALS & DESIGN
- A novel titanium alloy manufactured by selective laser melting: Microstructure, high temperature oxidation resistance
- (2016) Y. Zhou et al. MATERIALS & DESIGN
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting
- (2016) Takahiro Kimura et al. MATERIALS & DESIGN
- Investigation of dendritic growth and liquation cracking in laser melting deposited Inconel 718 at different laser input angles
- (2016) Yuan Chen et al. MATERIALS & DESIGN
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Effect of substrate orientation on the columnar-to-equiaxed transition in laser surface remelted single crystal superalloys
- (2015) L. Wang et al. ACTA MATERIALIA
- On the role of melt flow into the surface structure and porosity development during selective laser melting
- (2015) Chunlei Qiu et al. ACTA MATERIALIA
- A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
- (2015) X.P. Li et al. ACTA MATERIALIA
- A criterion for cracking during solidification
- (2015) Sindo Kou ACTA MATERIALIA
- Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
- (2015) M.J. Bermingham et al. ACTA MATERIALIA
- Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
- (2015) W. Xu et al. ACTA MATERIALIA
- Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
- (2015) Neil J. Harrison et al. ACTA MATERIALIA
- 2015 W.R. Whitney Award Lecture:The Effects of Microstructure and Composition on Al Alloy Corrosion
- (2015) G.S. Frankel CORROSION
- WPD-PCA-Based Laser Welding Process Monitoring and Defects Diagnosis by Using FNN and SVM
- (2015) Deyong You et al. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
- Evaluation of analytical modeling for improvement of surface roughness of FDM test part using measurement results
- (2015) Sadegh Rahmati et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Manipulation and Characterization of a Novel Titanium Powder Precursor for Additive Manufacturing Applications
- (2015) Y. Y. Sun et al. JOM
- Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
- (2015) Allison M. Beese et al. JOM
- Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure
- (2015) Sudha Cheruvathur et al. JOM
- Additive Manufacturing of Al-12Si Alloy Via Pulsed Selective Laser Melting
- (2015) R. Chou et al. JOM
- Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
- (2015) H. P. Tang et al. JOM
- Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V
- (2015) Mohsen Seifi et al. JOM
- Fabrication of large Ti–6Al–4V structures by direct laser deposition
- (2015) Chunlei Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties
- (2015) Stefan Ziegelmeier et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
- (2015) Christian Weingarten et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
- (2015) Galina Kasperovich et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting
- (2015) Shafaqat Siddique et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Balling phenomena in selective laser melted tungsten
- (2015) Xin Zhou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Build Direction Effects on Microchannel Tolerance and Surface Roughness
- (2015) Jacob C. Snyder et al. JOURNAL OF MECHANICAL DESIGN
- Selective laser sintering of MA956 oxide dispersion strengthened steel
- (2015) Ryan M. Hunt et al. JOURNAL OF NUCLEAR MATERIALS
- The anisotropy of laser melting deposition additive manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy
- (2015) Yanyan Zhu et al. MATERIALS & DESIGN
- Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
- (2015) Noriko Read et al. MATERIALS & DESIGN
- Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel
- (2015) Tyler LeBrun et al. MATERIALS & DESIGN
- The TriBeam system: Femtosecond laser ablation in situ SEM
- (2015) McLean P. Echlin et al. MATERIALS CHARACTERIZATION
- XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting
- (2015) S. Tammas-Williams et al. MATERIALS CHARACTERIZATION
- Process development for the manufacturing of 99.94% pure copper via selective electron beam melting
- (2015) Matthias A. Lodes et al. MATERIALS LETTERS
- Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
- (2015) Craig Brice et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Titanium alloyed with rhenium by selective laser melting
- (2015) Edward Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
- (2015) Aref Yadollahi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
- (2015) Dongyun Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting
- (2015) H.P. Tang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of porous commercially pure Ti and Ti–TiB composite materials manufactured by selective laser melting
- (2015) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hardened austenite steel with columnar sub-grain structure formed by laser melting
- (2015) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
- (2015) E. Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V
- (2015) Marco Simonelli et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
- (2015) Nesma T. Aboulkhair et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
- (2015) L. M. Sochalski-Kolbus et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
- (2015) Stefan Leuders et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting
- (2015) Martin Joachim Holzweissig et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Characterization of Nickel Based Superalloys Processed Through Direct Metal Laser Sintering Technique of Additive Manufacturing
- (2015) Yaakov Idell et al. MICROSCOPY AND MICROANALYSIS
- Rheological behavior of β-Ti and NiTi powders produced by atomization for SLM production of open porous orthopedic implants
- (2015) G. Yablokova et al. POWDER TECHNOLOGY
- The present and future of additive manufacturing in the aerospace sector: A review of important aspects
- (2015) Adrián Uriondo et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING
- A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
- (2015) E.O. Olakanmi et al. PROGRESS IN MATERIALS SCIENCE
- On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting
- (2015) C. Panwisawas et al. SCRIPTA MATERIALIA
- MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DIRECT METAL LASER SINTERED TI-6AL-4V
- (2015) Thorsten Hermann Becker et al. South African Journal of Industrial Engineering
- The macromolecular crystallography beamlines at BESSY II of the Helmholtz-Zentrum Berlin: Current status and perspectives
- (2015) Uwe Mueller et al. European Physical Journal Plus
- MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DIRECT METAL LASER SINTERED TI-6AL-4V
- (2015) Thorsten Hermann Becker et al. South African Journal of Industrial Engineering
- Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
- (2015) W. E. King et al. Applied Physics Reviews
- 2015 W.R. Whitney Award Lecture:The Effects of Microstructure and Composition on Al Alloy Corrosion
- (2015) G.S. Frankel CORROSION
- Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting
- (2015) Haijun Gong et al. MATERIALS & DESIGN
- Functionalization of Ti6Al4V scaffolds produced by direct metal laser for biomedical applications
- (2015) Juan J. de Damborenea et al. MATERIALS & DESIGN
- Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder
- (2015) Yang Liu et al. MATERIALS & DESIGN
- Computed tomography for characterization of fatigue performance of selective laser melted parts
- (2015) Shafaqat Siddique et al. MATERIALS & DESIGN
- The influence of heat accumulation on the surface roughness in powder-bed additive manufacturing
- (2015) Mahdi Jamshidinia et al. Surface Topography-Metrology and Properties
- Surface texture measurement for additive manufacturing
- (2015) Andrew Triantaphyllou et al. Surface Topography-Metrology and Properties
- Surface topography and the impact on fatigue performance
- (2015) D T Ardi et al. Surface Topography-Metrology and Properties
- Characterization of typical surface effects in additive manufacturing with confocal microscopy
- (2015) Tobias Grimm et al. Surface Topography-Metrology and Properties
- Characterization and analysis of surface notches on Ti-alloy plates fabricated by additive manufacturing techniques
- (2015) Kwai S Chan Surface Topography-Metrology and Properties
- Analysis and correction of defects within parts fabricated using powder bed fusion technology
- (2015) Jorge Mireles et al. Surface Topography-Metrology and Properties
- Dynamic compressive behaviour of Ti-6Al-4V alloy processed by electron beam melting under high strain rate loading
- (2015) A. Mohammadhosseini et al. Advances in Manufacturing
- Processing window and evaporation phenomena for Ti–6Al–4V produced by selective electron beam melting
- (2014) V. Juechter et al. ACTA MATERIALIA
- Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
- (2014) B. Vrancken et al. ACTA MATERIALIA
- Relationship between spatter formation and dynamic molten pool during high-power deep-penetration laser welding
- (2014) Shichun Li et al. APPLIED SURFACE SCIENCE
- Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology
- (2014) G. Ziółkowski et al. Archives of Civil and Mechanical Engineering
- Chemical polishing of scaffolds made of Ti–6Al–7Nb alloy by additive manufacturing
- (2014) E. Łyczkowska et al. Archives of Civil and Mechanical Engineering
- Implementation of a thermomechanical model for the simulation of selective laser melting
- (2014) N. E. Hodge et al. COMPUTATIONAL MECHANICS
- Prediction of short fatigue crack growth of Ti-6Al-4V
- (2014) K. Wang et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Modeling metal deposition in heat transfer analyses of additive manufacturing processes
- (2014) Panagiotis Michaleris FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Selective electron beam melting of Ti–48Al–2Nb–2Cr: Microstructure and aluminium loss
- (2014) Jan Schwerdtfeger et al. INTERMETALLICS
- The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
- (2014) Luke N. Carter et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Heat transfer and material flow during laser assisted multi-layer additive manufacturing
- (2014) V. Manvatkar et al. JOURNAL OF APPLIED PHYSICS
- A complete model of keyhole and melt pool dynamics to analyze instabilities and collapse during laser welding
- (2014) Mickael Courtois et al. JOURNAL OF LASER APPLICATIONS
- On Process Temperature in Powder-Bed Electron Beam Additive Manufacturing: Model Development and Validation
- (2014) Bo Cheng et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Selective Laser Melting of Crack-Free High Density M2 High Speed Steel Parts by Baseplate Preheating
- (2014) Karolien Kempen et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
- (2014) Gustavo Tapia et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
- (2014) Wayne E. King et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mesoscopic simulation model of selective laser melting of stainless steel powder
- (2014) Saad A. Khairallah et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Defect generation and propagation mechanism during additive manufacturing by selective beam melting
- (2014) A. Bauereiß et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization of microstructure and residual stress in a 3D H13 tool steel component produced by additive manufacturing
- (2014) Ryan Cottam et al. JOURNAL OF MATERIALS RESEARCH
- Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
- (2014) William J. Sames et al. JOURNAL OF MATERIALS RESEARCH
- Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure
- (2014) Harald Ernst Helmer et al. JOURNAL OF MATERIALS RESEARCH
- Analysis of multi-phase interaction and its effects on keyhole dynamics with a multi-physics numerical model
- (2014) Wenda Tan et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods
- (2014) Alexander Klassen et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Fatigue performance evaluation of selective laser melted Ti–6Al–4V
- (2014) P. Edwards et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
- (2014) X.J. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
- (2014) M. Simonelli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Site specific control of crystallographic grain orientation through electron beam additive manufacturing
- (2014) R. R. Dehoff et al. MATERIALS SCIENCE AND TECHNOLOGY
- Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory
- (2014) W. King et al. MATERIALS SCIENCE AND TECHNOLOGY
- An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
- (2014) Amanda S. Wu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Selective laser melting additive manufactured Inconel 718 superalloy parts: High-temperature oxidation property and its mechanisms
- (2014) Qingbo Jia et al. OPTICS AND LASER TECHNOLOGY
- Characterization of Metal Powders Used for Additive Manufacturing
- (2014) J. A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
- (2014) John A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
- (2013) L.E. Murr et al. ACTA MATERIALIA
- Oxide films in laser additive manufactured Inconel 718
- (2013) Y.N. Zhang et al. ACTA MATERIALIA
- Observation of spatter formation mechanisms in high-power fiber laser welding of thick plate
- (2013) M.J. Zhang et al. APPLIED SURFACE SCIENCE
- A novel method for manufacturing sintered aluminium heat pipes (SAHP)
- (2013) M. Ameli et al. APPLIED THERMAL ENGINEERING
- Effect of heat treatment on microstructure and mechanical properties of the hot-isostatic-pressed Inconel 718 powder compact
- (2013) Litao Chang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
- (2013) Qingbo Jia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
- (2013) Damien Buchbinder et al. JOURNAL OF LASER APPLICATIONS
- Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
- (2013) P. Edwards et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Sliding Wear Characteristics and Corrosion Behaviour of Selective Laser Melted 316L Stainless Steel
- (2013) Y. Sun et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
- (2013) H. K. Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti–6Al–4V powder fractions
- (2013) Joakim Karlsson et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dynamic keyhole profile during high-power deep-penetration laser welding
- (2013) S. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructures and Hardness Properties for β-Phase Ti–24Nb–4Zr–7.9Sn Alloy Fabricated by Electron Beam Melting
- (2013) J. Hernandez et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location
- (2013) Nikolas Hrabe et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment
- (2013) K.G. Prashanth et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Monitoring of high-power laser welding using high-speed photographing and image processing
- (2013) Deyong You et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Melt behavior on the keyhole front during high speed laser welding
- (2013) I. Eriksson et al. OPTICS AND LASERS IN ENGINEERING
- Fatigue performance of additive manufactured metallic parts
- (2013) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- Humping Effect in Welding of Steel with Single-Mode Fibre Laser
- (2013) C. Thomy et al. Welding in the World
- On the mechanism of porosity formation during welding of titanium alloys
- (2012) Jianglin L. Huang et al. ACTA MATERIALIA
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- High-Resolution Microfocus X-Ray Computed Tomography for 3D Surface Roughness Measurements of Additive Manufactured Porous Materials
- (2012) Greet Kerckhofs et al. ADVANCED ENGINEERING MATERIALS
- Photographic study of bubble departure diameter in saturated pool boiling to electrolyte solutions
- (2012) S.M. Peyghambarzadeh et al. Chemical Industry & Chemical Engineering Quarterly
- Influence of process parameters on surface roughness of aluminum parts produced by DMLS
- (2012) F. Calignano et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Material defects as the basis of fatigue design
- (2012) Yukitaka Murakami INTERNATIONAL JOURNAL OF FATIGUE
- The physics of fatigue crack initiation
- (2012) Michael D. Sangid INTERNATIONAL JOURNAL OF FATIGUE
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Evaluations of cellular lattice structures manufactured using selective laser melting
- (2012) Chunze Yan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
- (2012) Bey Vrancken et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti–6Al–4V alloy
- (2012) Myriam Gharbi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface roughness analysis, modelling and prediction in selective laser melting
- (2012) Giovanni Strano et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Laser deposition and deformation behavior of Ti–Nb–Zr–Ta alloys for orthopedic implants
- (2012) S. Nag et al. Journal of the Mechanical Behavior of Biomedical Materials
- Biocompatibility of Ti-alloys for long-term implantation
- (2012) Mohamed Abdel-Hady Gepreel et al. Journal of the Mechanical Behavior of Biomedical Materials
- Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants
- (2012) Kwai S. Chan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- NEW FRONTIERS IN THERMAL PLASMAS FROM SPACE TO NANOMATERIALS
- (2012) Maher I. Boulos Nuclear Engineering and Technology
- Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method
- (2012) Jean-Pierre Kruth et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Laser sintering of blended Al‐Si powders
- (2012) Eyitayo Olatunde Olakanmi et al. RAPID PROTOTYPING JOURNAL
- Corrosion mechanism associated with Mg2Si and Si particles in Al–Mg–Si alloys
- (2012) Feng-li ZENG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Analysis of Fracture Toughness and Crack Propagation of Ti6Al4V Produced by Selective Laser Melting
- (2011) Brecht Van Hooreweder et al. ADVANCED ENGINEERING MATERIALS
- Balling behavior of stainless steel and nickel powder during selective laser melting process
- (2011) Ruidi Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials
- (2011) Jordi Delgado et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
- (2011) Wang Di et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multiaxial fatigue: An overview and some approximation models for life estimation
- (2011) Ali Fatemi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Spatter in laser welding
- (2011) A. F. H. Kaplan et al. JOURNAL OF LASER APPLICATIONS
- Relationship of laser absorption to keyhole behavior in high power fiber laser welding of stainless steel and aluminum alloy
- (2011) Yousuke Kawahito et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition
- (2011) Bernd Baufeld et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Gas flow effects on selective laser melting (SLM) manufacturing performance
- (2011) B. Ferrar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A simple methodology for predicting laser-weld properties from material and laser parameters
- (2011) D B Hann et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Modelling of keyhole dynamics and porosity formation considering the adaptive keyhole shape and three-phase coupling during deep-penetration laser welding
- (2011) Haiyan Zhao et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
- (2011) Edward Chlebus et al. MATERIALS CHARACTERIZATION
- Direct Laser Fabrication of Ti-25V-15Cr-2Al-0.2C (wt pct) Burn-Resistant Titanium Alloy
- (2011) Fude Wang METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
- (2011) L. E. Murr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The conflicts between strength and toughness
- (2011) Robert O. Ritchie NATURE MATERIALS
- Comparison of density measurement techniques for additive manufactured metallic parts
- (2011) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
- (2011) Evren Yasa et al. RAPID PROTOTYPING JOURNAL
- Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
- (2011) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- The effect of oxygen on transitional Marangoni flow in laser spot welding
- (2010) C.X. Zhao et al. ACTA MATERIALIA
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications
- (2010) A. Sato et al. ACTA MATERIALIA
- Metastable Austenite in 17-4 Precipitation-Hardening Stainless Steel Produced by Selective Laser Melting
- (2010) Luca Facchini et al. ADVANCED ENGINEERING MATERIALS
- Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting
- (2010) Ruidi Li et al. APPLIED SURFACE SCIENCE
- Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation
- (2010) S. Biamino et al. INTERMETALLICS
- Microstructure-sensitive computational modeling of fatigue crack formation
- (2010) D.L. McDowell et al. INTERNATIONAL JOURNAL OF FATIGUE
- Advanced gas atomization processing for Ti and Ti alloy powder manufacturing
- (2010) A. J. Heidloff et al. JOM
- Production and corrosion behaviours of the Al–12Si–XMg alloys containing in situ Mg2Si particles
- (2010) H. Ahlatci JOURNAL OF ALLOYS AND COMPOUNDS
- Single track formation in selective laser melting of metal powders
- (2010) I. Yadroitsev et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mesoscopic simulation of selective beam melting processes
- (2010) Carolin Körner et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of aluminium components
- (2010) Eleftherios Louvis et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Melt pool and keyhole behaviour analysis for deep penetration laser welding
- (2010) R Fabbro JOURNAL OF PHYSICS D-APPLIED PHYSICS
- A three-dimensional sharp interface model for self-consistent keyhole and weld pool dynamics in deep penetration laser welding
- (2010) Shengyong Pang et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Residual stresses in laser direct metal deposited Waspaloy
- (2010) R.J. Moat et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture and Crystal Orientation in Ti-6Al-4V Builds Fabricated by Shaped Metal Deposition
- (2010) Bernd Baufeld et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
- (2010) S. S. Al-Bermani et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys
- (2010) Johann Kastner et al. NDT & E INTERNATIONAL
- Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
- (2010) Luca Facchini et al. RAPID PROTOTYPING JOURNAL
- Revealing the relationship between grain size and corrosion rate of metals
- (2010) K.D. Ralston et al. SCRIPTA MATERIALIA
- The Significance of Crack Initiation Stage in Very High Cycle Fatigue of Steels
- (2010) V. Kazymyrovych et al. STEEL RESEARCH INTERNATIONAL
- Application of direct laser metal tooling for AISI H13 tool steel
- (2010) Jae-Ho LEE et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A mechanism governing oxidation-assisted low-cycle fatigue of superalloys
- (2009) A.G. Evans et al. ACTA MATERIALIA
- Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams
- (2009) Jicheng Gong et al. ACTA MATERIALIA
- A pragmatic model for selective laser melting with evaporation
- (2009) F. Verhaeghe et al. ACTA MATERIALIA
- Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
- (2009) L.E. Murr et al. ACTA MATERIALIA
- Porosity formation and gas bubble retention in laser metal deposition
- (2009) G. K. L. Ng et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat source
- (2009) S. Bag et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Model of Radiation and Heat Transfer in Laser-Powder Interaction Zone at Selective Laser Melting
- (2009) A. V. Gusarov et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Numerical Simulation of Random Packing of Spherical Particles for Powder-Based Additive Manufacturing
- (2009) Jianhua Zhou et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Selective Laser Melting of thin wall parts using pulse shaping
- (2009) K.A. Mumtaz et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
- (2009) Dongdong Gu et al. MATERIALS & DESIGN
- Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
- (2009) Bernd Baufeld et al. MATERIALS & DESIGN
- The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminium alloy
- (2009) F. Malek Ghaini et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanisms for Solidification Crack Initiation and Growth in Aluminum Welding
- (2009) N. Coniglio et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental–numerical investigation
- (2009) Masoud Alimardani et al. OPTICS AND LASERS IN ENGINEERING
- Microstructure and mechanical properties of Ti‐6Al‐4V produced by electron beam melting of pre‐alloyed powders
- (2009) Luca Facchini et al. RAPID PROTOTYPING JOURNAL
- Top surface and side roughness of Inconel 625 parts processed using selective laser melting
- (2009) Kamran Mumtaz et al. RAPID PROTOTYPING JOURNAL
- Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scales
- (2008) F. Bridier et al. ACTA MATERIALIA
- Recent advances in X-ray microtomography applied to materials
- (2008) S. R. Stock INTERNATIONAL MATERIALS REVIEWS
- Grain-refinement mechanisms in titanium alloys
- (2008) M.J. Bermingham et al. JOURNAL OF MATERIALS RESEARCH
- Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
- (2008) L.E. Murr et al. Journal of the Mechanical Behavior of Biomedical Materials
- Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V
- (2008) L.E. Murr et al. MATERIALS CHARACTERIZATION
- Effect of microstructure on ultra-high cycle fatigue behavior of Ti–6Al–4V
- (2007) J.H. Zuo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A novel “sandwich” method for observation of the keyhole in deep penetration laser welding
- (2007) Yi Zhang et al. OPTICS AND LASERS IN ENGINEERING
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now