Effect of cross-flow velocity on spray evolution and impingement characteristics of a multi-hole port fuel injector

Mixture formation characteristics and feasibility of methanol as an alternative fuel for gasoline in port fuel injection engines: Droplet evaporation and spray visualization

(2023) Bo Yuan et al.   ENERGY CONVERSION AND MANAGEMENT

Computational Investigations of Spray Atomization and Evaporation Under Cold-Start Conditions of a Diesel Engine

(2022) Utkarsha Sonawane et al.   JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME

Dynamics of micrometer-sized droplet impact on vertical walls with different surface roughness

(2022) Lingzi Wang et al.   EUROPEAN JOURNAL OF MECHANICS B-FLUIDS

Droplet impact on a heated porous plate above the Leidenfrost temperature: A lattice Boltzmann study

(2022) Geng Wang et al.   PHYSICS OF FLUIDS

Evaluation of multi-hole diesel injectors spray under evaporating conditions: Effects of adjacent spray plumes on the macroscopic and mixture characteristics of target spray

(2022) Safiullah et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING

Reactivity Controlled Compression Ignition Engine Fueled With Mineral Diesel and Butanol at Varying Premixed Ratios and Loads

(2021) Avinash Kumar Agarwal et al.   JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME

Experimental study of the effects of droplet number density on turbulence-driven polydisperse droplet size growth

(2021) M. Shyam Kumar et al.   JOURNAL OF FLUID MECHANICS

Effect of airflow pressure on the droplet breakup in the shear breakup regime

(2021) Wanli Zhu et al.   PHYSICS OF FLUIDS

Spray droplet size distribution and droplet velocity measurements in a firing optical engine

(2020) Nikhil Sharma et al.   PHYSICS OF FLUIDS

Time-resolved measurement of the near-nozzle air entrainment of high-pressure diesel spray by high-speed micro-PTV technique

(2020) Yijie Wei et al.   FUEL

Effect of Fuel Injection Pressure and Premixed Ratio on Mineral Diesel-Methanol Fueled Reactivity Controlled Compression Ignition Mode Combustion Engine

(2020) Akhilendra P. Singh et al.   JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME

Leidenfrost behavior in drop-wall impacts at combustor-relevant ambient pressures

(2020) Abhijeet Chausalkar et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Microscopic Spray Characteristics of Biodiesels Derived From Karanja, Jatropha, and Waste Cooking Oils

(2020) Chetankumar Patel et al.   JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME

A Comprehensive Experimental Investigation on the PFI spray impingement: Effect of Impingement geometry, Cross-Flow and Wall Temperature

(2019) Yaoting Li et al.   APPLIED THERMAL ENGINEERING

Effect of cross-flow on spray structure, droplet diameter and velocity of impinging spray

(2018) Zhanbo Si et al.   FUEL

Microscopic behavior of spray droplets under flat-wall impinging condition

(2018) Hongliang Luo et al.   FUEL

SPH simulation of fuel drop impact on heated surfaces

(2018) Xiufeng Yang et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Evolution, challenges and path forward for low temperature combustion engines

(2017) Avinash Kumar Agarwal et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Diesoline, Diesohol, and Diesosene Fuelled HCCI Engine Development

(2016) Akhilendra Pratap Singh et al.   JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME

Liquid jet in a subsonic gaseous crossflow: Recent progress and remaining challenges

(2016) M. Broumand et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion engines

(2015) Rolf D. Reitz et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Combustion and Emission Characterization ofn-Butanol Fueled HCCI Engine

(2014) Rakesh Kumar Maurya et al.   JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME

Homogeneous charge compression ignition (HCCI) combustion: Mixture preparation and control strategies in diesel engines

(2014) Harisankar Bendu et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Experimental study on spray break-up and atomization processes from GDI injector using high injection pressure up to 30MPa

(2013) Sanghoon Lee et al.   INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW

Imaging diagnostics of ethanol port fuel injection sprays for automobile engine applications

(2012) Srinivas Padala et al.   APPLIED THERMAL ENGINEERING

Spray characterization of gasoline-ethanol blends from a multi-hole port fuel injector

(2012) T.N.C. Anand et al.   FUEL

Effect of a cross-flow on spray impingement with port fuel injection systems for HCCI engines

(2012) Miguel R. Oliveira Panão et al.   FUEL

Breakup and coalescence characteristics of a hollow cone swirling spray

(2012) Abhishek Saha et al.   PHYSICS OF FLUIDS

Bouncing, coalescence, and separation in head-on collision of unequal-size droplets

(2012) Chenglong Tang et al.   PHYSICS OF FLUIDS

Micrometer-Sized Water Droplet Impingement Dynamics and Evaporation on a Flat Dry Surface

(2010) Alejandro M. Briones et al.   LANGMUIR

Laser-Based Spatio-Temporal Characterisation of Port Fuel Injection (PFI) Sprays

(2010) C. T. N. Anand et al.   International Journal of Spray and Combustion Dynamics