Mixture formation characteristics and feasibility of methanol as an alternative fuel for gasoline in port fuel injection engines: Droplet evaporation and spray visualization

Progress in experimental investigations on evaporation characteristics of a fuel droplet

(2022) Zhaowen Wang et al.   FUEL PROCESSING TECHNOLOGY

A new shift mechanism for micro-explosion of water-diesel emulsion droplets at different ambient temperatures

(2022) Zhaowen Wang et al.   APPLIED ENERGY

Understanding the antagonistic effect of methanol as a component in surrogate fuel models: A case study of methanol/n-heptane mixtures

(2021) Yingtao Wu et al.   COMBUSTION AND FLAME

Laser Induced Fluorescence Investigation on Deposited Fuel Film from Spray Impingement on Viscous Film over a Solid Wall

(2021) Chenxi Wang et al.   ENERGY

Comparison in the effects of alumina, ceria and silica nanoparticle additives on the combustion and emission characteristics of a modern methanol-diesel dual-fuel CI engine

(2021) Jiangjun Wei et al.   ENERGY CONVERSION AND MANAGEMENT

A review of strategies for mitigating roadside air pollution in urban street canyons

(2021) Yuhan Huang et al.   ENVIRONMENTAL POLLUTION

Dual injection: An effective and efficient technology to use renewable fuels in spark ignition engines

(2021) Yuhan Huang et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Experimental study on the evaporation characteristics of biodiesel-ABE blended droplets

(2021) Kai Han et al.   ENERGY

Low-carbon biomass-fueled integrated system for power, methane and methanol production

(2021) Beneta Eisavi et al.   ENERGY CONVERSION AND MANAGEMENT

Spray and combustion characteristics of polyoxymethylene dimethyl ethers and diesel blends in a constant volume chamber

(2021) Jingjing He et al.   Energy Reports

Assessment of ultra-lean burn characteristics for a stratified-charge direct-injection spark-ignition methanol engine under different high compression ratios

(2020) Changming Gong et al.   APPLIED ENERGY

Experiment investigation on the effects of air assisted SCR spray impingement on wall temperature evolution

(2020) Jun Wang et al.   ENERGY

Parametric study on effects of excess air/fuel ratio, spark timing, and methanol injection timing on combustion characteristics and performance of natural gas/methanol dual-fuel engine at low loads

(2020) Zhanming Chen et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental study on evaporation and micro-explosion characteristics of biodiesel/n-propanol blended droplet

(2020) Xiaoyu Huang et al.   ENERGY

Experimental investigation on performance and combustion characteristics of spark-ignition dual-fuel engine fueled with methanol/natural gas

(2019) Zhanming Chen et al.   APPLIED THERMAL ENGINEERING

A Comprehensive Experimental Investigation on the PFI spray impingement: Effect of Impingement geometry, Cross-Flow and Wall Temperature

(2019) Yaoting Li et al.   APPLIED THERMAL ENGINEERING

Development of Heat Transfer Model at Intake System of IC Engine with Consideration of Backflow Gas Effect

(2019) Emir Yilmaz et al.   INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY

Ethanol droplet evaporation: Effects of ambient temperature, pressure and fuel vapor concentration

(2019) Abgail P. Pinheiro et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Characteristics of the deposited fuel liquid film when GDI spray impacts viscous oil film

(2019) Yi Liu et al.   ENERGY

The impact from the direct injection and multi-port fuel injection technologies for gasoline vehicles on solid particle number and black carbon emissions

(2018) Liqiang He et al.   APPLIED ENERGY

Effects of injection pressure on spray structure after wall impingement

(2018) Wei Du et al.   APPLIED THERMAL ENGINEERING

Effect of cross-flow on spray structure, droplet diameter and velocity of impinging spray

(2018) Zhanbo Si et al.   FUEL

Effect of temperature on fuel adhesion under spray-wall impingement condition

(2018) Hongliang Luo et al.   FUEL

Methanol as a fuel for internal combustion engines

(2018) Sebastian Verhelst et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Effects of spark timing and methanol addition on combustion characteristics and emissions of dual-fuel engine fuelled with natural gas and methanol under lean-burn condition

(2018) Zhanming Chen et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental study on puffing characteristics of biodiesel-butanol droplet

(2017) Yu Zhang et al.   FUEL

The effect of different n -butanol-fatty acid methyl esters (FAME) blends on puffing characteristics

(2017) Yu Zhang et al.   FUEL

Tailpipe emissions from gasoline direct injection (GDI) and port fuel injection (PFI) vehicles at both low and high ambient temperatures

(2016) Rencheng Zhu et al.   ENVIRONMENTAL POLLUTION

Experimental investigation on spray-wall impingement characteristics of n-butanol/diesel blended fuels

(2016) Hanzhengnan Yu et al.   FUEL

An overview of methanol as an internal combustion engine fuel

(2015) Xudong Zhen et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Particulate Matter Emission Comparison of Spark Ignition Direct Injection (SIDI) and Port Fuel Injection (PFI) Operation of a Boosted Gasoline Engine

(2014) Jianye Su et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

Optical diagnostics of the combustion process in a PFI SI boosted engine fueled with butanol–gasoline blend

(2012) Cinzia Tornatore et al.   ENERGY

Effect of a cross-flow on spray impingement with port fuel injection systems for HCCI engines

(2012) Miguel R. Oliveira Panão et al.   FUEL

Drop Impact on Superheated Surfaces

(2012) Tuan Tran et al.   PHYSICAL REVIEW LETTERS

Optical contouring of an acrylic surface for non-intrusive diagnostics in pipe-flow investigations

(2008) Benjamin J. de Witt et al.   EXPERIMENTS IN FLUIDS