On adiabatic shear instability in impacts of micron-scale Al-6061 particles with sapphire and Al-6061 substrates
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
On adiabatic shear instability in impacts of micron-scale Al-6061 particles with sapphire and Al-6061 substrates
Authors
Keywords
-
Journal
INTERNATIONAL JOURNAL OF PLASTICITY
Volume 166, Issue -, Pages 103630
Publisher
Elsevier BV
Online
2023-05-12
DOI
10.1016/j.ijplas.2023.103630
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Shear band formation in porous thin-walled tubes subjected to dynamic torsion
- (2022) A.R. Vishnu et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Ultrahigh strain rate-activated superplastic forming of aluminum and gold nanometals
- (2022) Jian Liu et al. MATERIALS & DESIGN
- Miniature Beryllium Split-Hopkinson Pressure Bars for Extending the Range of Achievable Strain-Rates
- (2022) Bryan Zuanetti et al. Metals
- Lode-dependent second porosity in porous plasticity for shear-dominated loadings
- (2022) Gilles Rousselier INTERNATIONAL JOURNAL OF PLASTICITY
- Anisotropic thermal-conductivity degradation in the phase-field method accounting for crack directionality
- (2021) Lampros Svolos et al. ENGINEERING FRACTURE MECHANICS
- Controllable additive manufacturing of gradient bulk metallic glass composite with high strength and tensile ductility
- (2021) Yunzhuo Lu et al. ACTA MATERIALIA
- Numerical modelling of particle impact and residual stresses in cold sprayed coatings: A review
- (2021) Ahmed Fardan et al. SURFACE & COATINGS TECHNOLOGY
- A mixed finite element formulation for ductile damage modeling of thermoviscoplastic metals accounting for void shearing
- (2021) João Paulo Pascon et al. COMPUTATIONAL MECHANICS
- Finite element analysis to determine the role of porosity in dynamic localization and fragmentation: Application to porous microstructures obtained from additively manufactured materials
- (2021) M. Marvi-Mashhadi et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Microstructure Quantification and Multiresolution Mechanical Characterization of Ti-Based Bulk Metallic Glass-Matrix Composites
- (2021) Ali Khosravani et al. JOM
- A physical-based unified constitutive model of AA7075 for a novel hot forming condition with pre-cooling
- (2021) Yong Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Structural evolution of a CuZr-based bulk metallic glass composite during cryogenic treatment observed by in-situ high-energy X-ray diffraction
- (2021) Peng Xue et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A novel micromechanics-enhanced phase-field model for frictional damage and fracture of quasi-brittle geomaterials
- (2021) Tao You et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Density, Microstructure, and Strain-Rate Effects on the Compressive Response of Polyurethane Foams
- (2021) K. B. Bhagavathula et al. EXPERIMENTAL MECHANICS
- Quasi-static and dynamic investigation of an advanced high strength and corrosion resistant 10 % Cr nanocomposite martensitic steel
- (2021) Saadi A. Habib et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- New insights into the role of porous microstructure on dynamic shear localization
- (2021) A.R. Vishnu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- “Self-sharpening” tungsten high-entropy alloy
- (2020) Xing-Fa Liu et al. ACTA MATERIALIA
- Quasi-static and dynamic response, and texture evolution of two overaged Al 7056 alloy plates in T761 and T721 tempers: Experiments and modeling
- (2020) Angela Y. Ku et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Cyclic Strain Heterogeneity and Damage Formation in Rolled Magnesium Via In Situ Microscopic Image Correlation
- (2020) N. Shafaghi et al. EXPERIMENTAL MECHANICS
- Thermal-conductivity degradation across cracks in coupled thermo-mechanical systems modeled by the phase-field fracture method
- (2020) Lampros Svolos et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Towards joinability of thermal self-piercing riveting for AA7075-T6 aluminum alloy sheets under quasi-static loading conditions
- (2020) Liang Ying et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Porous plasticity revisited: Macroscopic and multiscale modeling
- (2020) Gilles Rousselier INTERNATIONAL JOURNAL OF PLASTICITY
- Grain refinement in hot working of 2219 aluminium alloy: On the effect of deformation mode and loading path
- (2020) X. Zeng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A modified Johnson-Cook material model with strain gradient plasticity consideration for numerical simulation of cold spray process
- (2020) Rohan Chakrabarty et al. SURFACE & COATINGS TECHNOLOGY
- High resolution digital image correlation mapping of strain localization upon room and high temperature, high cycle fatigue of a TiAl intermetallic alloy
- (2020) Thomas Edward James Edwards et al. INTERNATIONAL JOURNAL OF FATIGUE
- A three-pronged approach to predict the effect of plastic orthotropy on the formability of thin sheets subjected to dynamic biaxial stretching
- (2020) K.E. N’souglo et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Flow stress correction for hot compression of titanium alloys considering temperature gradient induced heterogeneous deformation
- (2020) H. Xiao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The combined effect of size, inertia and porosity on the indentation response of ductile materials
- (2020) T. dos Santos et al. MECHANICS OF MATERIALS
- A thermodynamic framework to predict ductile damage in thermoviscoplastic porous metals
- (2020) João Paulo Pascon et al. MECHANICS OF MATERIALS
- Shear localization in metallic materials at high strain rates
- (2020) Na Yan et al. PROGRESS IN MATERIALS SCIENCE
- Effects of Interface Bonding on the Residual Stresses in Cold-Sprayed Al-6061: A Numerical Investigation
- (2019) Enqiang Lin et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- An experimental study of the polycrystalline plasticity of lamellar titanium aluminide
- (2019) Thomas Edward James Edwards et al. INTERNATIONAL JOURNAL OF PLASTICITY
- In situ investigation of strain heterogeneity and microstructural shear bands in rolled Magnesium AZ31
- (2019) İ. Buğra Üçel et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Serration and shear avalanches in a ZrCu based bulk metallic glass composite in different loading methods
- (2019) Haichao Sun et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Slip bands in lamellar TiAl during high cycle fatigue microcompression by correlative total strain mapping, diffraction orientation mapping and transmission electron imaging
- (2019) Thomas Edward James Edwards et al. INTERNATIONAL JOURNAL OF FATIGUE
- Thermal forming limit diagram (TFLD) of AA7075 aluminum alloy based on a modified continuum damage model: Experimental and theoretical investigations
- (2019) Hai Rong et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Fracture of an anisotropic rare-earth-containing magnesium alloy (ZEK100) at different stress states and strain rates: Experiments and modeling
- (2019) Saadi A. Habib et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Grain morphology related microstructural developments in bulk deformation of 2219 aluminum alloy sheet at elevated temperature
- (2019) X. Zeng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Characterization of Aluminum 6061 Splats Cold Spray Deposited on Aluminum 6061-T6 Substrate
- (2019) Wendy C. Evans et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- In situ study of the shear band features of a CuZr-based bulk metallic glass composite
- (2019) Songshan Jiang et al. INTERMETALLICS
- Crystal plasticity analysis of deformation anisotropy of lamellar TiAl alloy: 3D microstructure-based modelling and in-situ micro-compression
- (2019) Liu Chen et al. INTERNATIONAL JOURNAL OF PLASTICITY
- On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminum alloy: Numerical and experimental investigation
- (2019) Liang Ying et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Enhanced tensile plasticity of a CuZr-based bulk metallic glass composite induced by ion irradiation
- (2019) Peng Xue et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- The mechanical performance and a rate-dependent constitutive model for Al3Ti compound
- (2019) Yang Cao et al. Defence Technology
- Mesoscale modeling of jet initiation behavior and microstructural evolution during cold spray single particle impact
- (2019) Sumit Suresh et al. ACTA MATERIALIA
- Investigation on mechanical behavior and plastic damage of AA7075 aluminum alloy by thermal small punch test: Experimental trials, numerical analysis
- (2019) Tianhan Gao et al. Journal of Manufacturing Processes
- Laser additive manufacturing of structural-graded bulk metallic glass
- (2018) Yunzhuo Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Achieving fine-grained equiaxed alpha via thermo-mechanical loading under off-equilibrium state in two-phase Ti-alloys
- (2018) M. Meng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A CuZr-based bulk metallic glass composite with excellent mechanical properties by optimizing microstructure
- (2018) Song-Shan Jiang et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- High-Strain-Rate Material Behavior and Adiabatic Material Instability in Impact of Micron-Scale Al-6061 Particles
- (2018) Qiyong Chen et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- On the instability of chip flow in high-speed machining
- (2018) G.G. Ye et al. MECHANICS OF MATERIALS
- Strain Localization during Equal-Channel Angular Pressing Analyzed by Finite Element Simulations
- (2018) Tobias Horn et al. Metals
- Adiabatic shear instability is not necessary for adhesion in cold spray
- (2018) Mostafa Hassani-Gangaraj et al. ACTA MATERIALIA
- Explicit and implicit methods for shear band modeling at high strain rates
- (2018) Luc Berger-Vergiat et al. COMPUTATIONAL MECHANICS
- Direct Determination of Structural Heterogeneity in Metallic Glasses Using Four-Dimensional Scanning Transmission Electron Microscopy
- (2018) Soohyun Im et al. ULTRAMICROSCOPY
- Thermal gradient and its contribution to size effect of specific cutting energy
- (2018) G. G. Ye et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Eddy current induced dynamic deformation behaviors of aluminum alloy during EMF: Modeling and quantitative characterization
- (2018) Hong-wei Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Response to Comment on “Adiabatic shear instability is not necessary for adhesion in cold spray”
- (2018) Mostafa Hassani-Gangaraj et al. SCRIPTA MATERIALIA
- Comment on ‘Adiabatic shear instability is not necessary for adhesion in cold spray’
- (2018) H. Assadi et al. SCRIPTA MATERIALIA
- Interaction of the Portevin–Le Chatelier phenomenon with ductile fracture of a thin aluminum CT specimen: experiments and simulations
- (2017) Gilles Rousselier et al. INTERNATIONAL JOURNAL OF FRACTURE
- Size effects on the mechanical properties of nanocrystalline NbMoTaW refractory high entropy alloy thin films
- (2017) X.B. Feng et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Combined stability analysis of phase-field dynamic fracture and shear band localization
- (2017) Miguel Arriaga et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Anisotropy, tension-compression asymmetry and texture evolution of a rare-earth-containing magnesium alloy sheet, ZEK100, at different strain rates and temperatures: Experiments and modeling
- (2017) Saadi A. Habib et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Multiple necking pattern in nonlinear elastic bars subjected to dynamic stretching: The role of defects and inertia
- (2017) A. Vaz-Romero et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- The critical neck spacing in ductile plates subjected to dynamic biaxial loading: On the interplay between loading path and inertia effects
- (2017) J.A. Rodríguez-Martínez et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Bending behavior of as-cast and annealed ZrCuNiAl bulk metallic glass
- (2017) Yongjiang Huang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Texture-dependent character of strain heterogeneity in Magnesium AZ31 under reversed loading
- (2017) Enver Kapan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation behavior and microstructure evolution during hot working of a coarse-grained Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy in beta phase field
- (2017) X.G. Fan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Onset and evolution of discontinuously segmented chip flow in ultra-high-speed cutting Ti-6Al-4V
- (2016) G. G. Ye et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Characterization and modeling of the strain rate sensitivity of polyetheretherketone’s compressive yield stress
- (2015) Zakaria El-Qoubaa et al. MATERIALS & DESIGN
- A Modified Eyring Equation for Modeling Yield and Flow Stresses of Metals at Strain Rates Ranging from 10−5to 5 × 104 s−1
- (2015) Ramzi Othman Advances in Materials Science and Engineering
- Integration of a new data acquisition/processing scheme in SHPB test and characterization of the dynamic material properties of high-strength steels using the optional form of Johnson-Cook model
- (2014) Brian J. Tuazon et al. Journal of Mechanical Science and Technology
- A Numerical Investigation Into Cold Spray Bonding Processes
- (2014) Baran Yildirim et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration
- (2014) J.-H. Lee et al. SCIENCE
- Temperature and strain rate effects in cold spray investigated by smoothed particle hydrodynamics
- (2014) V. Lemiale et al. SURFACE & COATINGS TECHNOLOGY
- Cold spray coating: review of material systems and future perspectives
- (2014) A. Moridi et al. SURFACE ENGINEERING
- Negative to positive strain rate sensitivity in 5xxx series aluminum alloys: Experiment and constitutive modeling
- (2013) Farhoud Kabirian et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Cold spray coating process for corrosion protection: a review
- (2013) N. Bala et al. SURFACE ENGINEERING
- An experimental–numerical investigation on aluminium tubes subjected to ballistic impact with soft core 7.62 ball projectiles
- (2013) Andrea Manes et al. THIN-WALLED STRUCTURES
- High strain rate deformation of layered nanocomposites
- (2012) Jae-Hwang Lee et al. Nature Communications
- Constitutive modelling of plasticity of fcc metals under extremely high strain rates
- (2011) C.Y. Gao et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A dynamic punch method to quantify the dynamic shear strength of brittle solids
- (2011) S. Huang et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- 3D FEM simulations of shoulder milling operations on a 304L stainless steel
- (2011) A. Maurel-Pantel et al. SIMULATION MODELLING PRACTICE AND THEORY
- Modeling of high velocity impact of spherical particles
- (2011) Baran Yildirim et al. WEAR
- From Particle Acceleration to Impact and Bonding in Cold Spraying
- (2009) Tobias Schmidt et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started