- Home
- Publications
- Publication Search
- Publication Details
Title
Shear localization in metallic materials at high strain rates
Authors
Keywords
-
Journal
PROGRESS IN MATERIALS SCIENCE
Volume 119, Issue -, Pages 100755
Publisher
Elsevier BV
Online
2020-11-25
DOI
10.1016/j.pmatsci.2020.100755
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Temperature Rise Associated with Adiabatic Shear Band: Causality Clarified
- (2019) Yazhou Guo et al. PHYSICAL REVIEW LETTERS
- Rates of Dynamic Recrystallization in Geologic Materials
- (2019) A. J. Cross et al. JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
- Strain localization and dynamic recrystallization in polycrystalline metals: thermodynamic theory and simulation framework
- (2019) Charles K.C. Lieou et al. INTERNATIONAL JOURNAL OF PLASTICITY
- In Situ Observation of Adiabatic Shear Band Formation in Aluminum Alloys
- (2019) Y. Nie et al. EXPERIMENTAL MECHANICS
- Plasticity without dislocations in a polycrystalline intermetallic
- (2019) Hubin Luo et al. Nature Communications
- Reassessment of the Dynamic Thermomechanical Conversion in Metals
- (2019) J. C. Nieto-Fuentes et al. PHYSICAL REVIEW LETTERS
- Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy
- (2018) Zezhou Li et al. ACTA MATERIALIA
- Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures
- (2018) Yan Ma et al. ACTA MATERIALIA
- On shear failure behaviors of an armor steel over a large range of strain rates
- (2018) Zejian Xu et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Elastic precursor wave decay in shock-compressed aluminum over a wide range of temperature
- (2018) Ryan A. Austin JOURNAL OF APPLIED PHYSICS
- Laser shock compression induced crystallization of Ce3Al metallic glass
- (2018) Alex W. Bryant et al. JOURNAL OF APPLIED PHYSICS
- Dynamic shear localization of a titanium alloy under high-rate tension characterized by x-ray digital image correlation
- (2018) S.Y. Wu et al. MATERIALS CHARACTERIZATION
- Mechanical and microstructural properties of 2024-T351 aluminium using a hat-shaped specimen at high strain rates
- (2018) Nathan J. Edwards et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel
- (2018) J.T. Benzing et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution of adiabatic shear bands in pure copper during impact at high strain rates
- (2018) Solomon Boakye-Yiadom et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution within adiabatic shear band in peak aged ZK60 magnesium alloy
- (2018) Lihong Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Respective/combined roles of thermal softening and dynamic recrystallization in adiabatic shear banding initiation
- (2018) Patrice Longère MECHANICS OF MATERIALS
- Grain refinement and amorphization in nanocrystalline NiTi micropillars under uniaxial compression
- (2018) Peng Hua et al. SCRIPTA MATERIALIA
- Shock-induced amorphization in silicon carbide
- (2018) S. Zhao et al. ACTA MATERIALIA
- Dynamic recrystallization in adiabatic shear banding: Effective-temperature model and comparison to experiments in ultrafine-grained titanium
- (2018) Charles K.C. Lieou et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Modeling the temperature and high strain rate sensitivity in BCC iron: Atomistically informed multiscale dislocation dynamics simulations
- (2018) Pascale El Ters et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Omega phase formation and deformation mechanism in heat treated Ti-5553 alloy under high strain rate compression
- (2018) Tayyeb Ali et al. MATERIALS LETTERS
- A novel method in dynamic shear testing of bulk materials using the traditional SHPB technique
- (2017) Zejian Xu et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Evolution of precipitates in ZK60 magnesium alloy during high strain rate deformation
- (2017) Yang Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Stress dependence of microstructures in experimentally deformed calcite
- (2017) John P. Platt et al. JOURNAL OF STRUCTURAL GEOLOGY
- The fabrication of Cu nanowire/graphene/Al doped ZnO transparent conductive film on PET substrate with high flexibility and air stability
- (2017) Liqiang Zhang et al. MATERIALS LETTERS
- Enhanced quasi-static and dynamic shear properties by heterogeneous gradient and lamella structures in 301 stainless steels
- (2017) Junxia Xing et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure investigations on 2A10 aluminum alloy bars subjected to electromagnetic impact upsetting
- (2017) Xu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Quasi-static and dynamic forced shear deformation behaviors of Ti-5Mo-5V-8Cr-3Al alloy
- (2017) Zhiming Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation and failure in extreme regimes by high-energy pulsed lasers: A review
- (2017) Tane P. Remington et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical responses and dynamic failure of nanostructure Cu–Al alloys under uniaxial compression
- (2017) Jianguo Li et al. MECHANICS OF MATERIALS
- Dynamic large strain characterization of tantalum using shear-compression and shear-tension testing
- (2017) A. Dorogoy et al. MECHANICS OF MATERIALS
- Generating gradient germanium nanostructures by shock-induced amorphization and crystallization
- (2017) Shiteng Zhao et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- A review on the strain rate dependency of the dynamic viscoplastic response of FCC metals
- (2017) Francisco C. Salvado et al. PROGRESS IN MATERIALS SCIENCE
- High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure
- (2017) Z. Li et al. Scientific Reports
- Determination of geometrically necessary dislocations in large shear strain localization in aluminum
- (2016) Chaoyi Zhu et al. ACTA MATERIALIA
- Compact forced simple-shear sample for studying shear localization in materials
- (2016) G.T. Gray et al. ACTA MATERIALIA
- Amorphization and nanocrystallization of silicon under shock compression
- (2016) S. Zhao et al. ACTA MATERIALIA
- On the formation of adiabatic shear bands in textured HCP polycrystals
- (2016) Zhen Zhang et al. INTERNATIONAL JOURNAL OF PLASTICITY
- On adiabatic shear fracture in high-speed machining of martensitic precipitation-hardening stainless steel
- (2016) Liyao Gu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Diffusive transformation at high strain rate: On instantaneous dissolution of precipitates in aluminum alloy during adiabatic shear deformation
- (2016) Yang Yang et al. JOURNAL OF MATERIALS RESEARCH
- Effect of heat treatment on adiabatic shear susceptibility in ZK60 magnesium alloy
- (2016) Yang Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Shear localization and microstructure in coarse grained beta titanium alloy
- (2016) Bingfeng Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Capturing of the propagating processes of adiabatic shear band in Ti–6Al–4V alloys under dynamic compression
- (2016) Chao Zheng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of heat-treatment on the dynamic behavior of 3D laser-deposited Ti–6Al–4V alloy
- (2016) Jin Yao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Directional amorphization of boron carbide subjected to laser shock compression
- (2016) Shiteng Zhao et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
- (2016) Bernd Gludovatz et al. Nature Communications
- Adiabatic shear localization in nanostructured face centered cubic metals under uniaxial compression
- (2016) Jianguo Li et al. MATERIALS & DESIGN
- The genesis of adiabatic shear bands
- (2016) P. Landau et al. Scientific Reports
- Progressive shear band propagation in metallic glasses under compression
- (2015) R.T. Qu et al. ACTA MATERIALIA
- Study on the characteristics and thermal stability of nanostructures in adiabatic shear band of 2195 Al–Li alloy
- (2015) Yang Yang et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Compact SHPB System for Intermediate and High Strain Rate Plasticity and Fracture Testing of Sheet Metal
- (2015) C. C. Roth et al. EXPERIMENTAL MECHANICS
- A Shear-Tension Specimen for Large Strain Testing
- (2015) A. Dorogoy et al. EXPERIMENTAL MECHANICS
- Modification of the Shear-Compression Specimen for Large Strain Testing
- (2015) A. Dorogoy et al. EXPERIMENTAL MECHANICS
- Effect of Strain on Microstructure Evolution of 1Cr18Ni9Ti Stainless Steel During Adiabatic Shearing
- (2015) Y. Yang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Influence of shear heating on microstructurally defined plate boundary shear zones
- (2015) John P. Platt JOURNAL OF STRUCTURAL GEOLOGY
- Self-organization of adiabatic shear bands in OFHC copper and HY-100 steel
- (2015) N.A. Kudryashov et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Adiabatic shear localization in a near beta Ti–5Al–5Mo–5 V–1Cr–1Fe alloy
- (2015) Bingfeng Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Adiabatic shear localization in pure titanium deformed by dynamic loading: Microstructure and microtexture characteristic
- (2015) Yanghui Jiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Major Steps in the Discovery of Adiabatic Shear Bands
- (2015) Bradley Dodd et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Room Temperature Dynamic Strain Aging in Ultrafine-Grained Titanium
- (2015) Felipe Perissé D. Lopes et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Joining of bulk metallic glass to brass by thick-walled cylinder explosion
- (2015) M.Q. Jiang et al. SCRIPTA MATERIALIA
- The effect of microstructure on abrasive wear of a Fe–Cr–C–Nb hardfacing alloy deposited by the open arc welding process
- (2015) E.O. Correa et al. SURFACE & COATINGS TECHNOLOGY
- Material transfer behaviour between a Ti6Al4V blade and an aluminium hexagonal boron nitride abradable coating during high-speed rubbing
- (2015) W.H. Xue et al. WEAR
- Underlying mechanism of periodical adiabatic shear bands generated in Ti–6Al–4V target by projectile impact
- (2015) Jintao Liu et al. MATERIALS & DESIGN
- Influence of severe plastic deformation on dynamic strain aging of ultrafine grained Al–Mg alloys
- (2014) Shiteng Zhao et al. ACTA MATERIALIA
- A single shear band in a metallic glass: Local core and wide soft zone
- (2014) R. Maaß et al. APPLIED PHYSICS LETTERS
- Experimental Study on the Perforation Process of 5754-H111 and 6082-T6 Aluminium Plates Subjected to Normal Impact by Conical, Hemispherical and Blunt Projectiles
- (2014) M. Rodríguez-Millán et al. EXPERIMENTAL MECHANICS
- Simulation of shock wave propagation in single crystal and polycrystalline aluminum
- (2014) J.T. Lloyd et al. INTERNATIONAL JOURNAL OF PLASTICITY
- An extension of the linear stability analysis for the prediction of multiple necking during dynamic extension of round bar
- (2014) S. El Maï et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Characterisation of aluminium matrix syntactic foams under drop weight impact
- (2014) M. Altenaiji et al. MATERIALS & DESIGN
- Prolonged work hardening range in high manganese TRIP steel during adiabatic shear band formation
- (2014) Jing Li et al. MATERIALS LETTERS
- Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact
- (2014) Solomon Boakye Yiadom et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of microstructures on ballistic impact property of Ti–6Al–4V targets
- (2014) Chao Zheng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An EBSD investigation on deformation-induced shear bands in a low nickel austenitic stainless steel under controlled shock-loading conditions
- (2014) B.F. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Plastic flow behavior of 7017 and 7055 aluminum alloys under different high strain rate test methods
- (2014) Bidyapati Mishra et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A systematic study of grain refinement during impact of 4340 steel
- (2014) Solomon Boakye-Yiadom et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A modified split Hopkinson torsional bar system for correlated study of - relations, shear localization and microstructural evolution
- (2014) R. Yang et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- In situ damage assessment using synchrotron X-rays in materials loaded by a Hopkinson bar
- (2014) W. W. Chen et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Load-Inversion Device for the High Strain Rate Tensile Testing of Sheet Materials with Hopkinson Pressure Bars
- (2013) M. Dunand et al. EXPERIMENTAL MECHANICS
- La-based bulk metallic glass failure analysis under static and dynamic loading
- (2013) Jun Liu et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy
- (2013) M.H. Miguélez et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Collective evolution dynamics of multiple shear bands in bulk metallic glasses
- (2013) Y. Chen et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Identification of the critical wavelength responsible for the fragmentation of ductile rings expanding at very high strain rates
- (2013) J.A. Rodríguez-Martínez et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti–6Al–4V
- (2013) A. Molinari et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Experimental and numerical analysis of micromechanical damage in the punching process for High-Strength Low-Alloy steels
- (2013) Mohamed Achouri et al. MATERIALS & DESIGN
- Shear bands in metallic glasses
- (2013) A.L. Greer et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Adiabatic shear failure of aluminum matrix composites and microstructural characteristics of transformed bands
- (2013) Dezhi Zhu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A numerical model for adiabatic shear bands with application to a thick-walled cylinder in 304 stainless steel
- (2013) Mingtao Liu et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Microstructures and properties of high-entropy alloys
- (2013) Yong Zhang et al. PROGRESS IN MATERIALS SCIENCE
- Plastic strain localization in metals: origins and consequences
- (2013) Stephen D. Antolovich et al. PROGRESS IN MATERIALS SCIENCE
- Transition from Impact-induced Thermal Runaway to Prompt Mechanochemical Explosion in Nanoscaled Ni/Al Reactive Systems
- (2013) Robert V. Reeves et al. PROPELLANTS EXPLOSIVES PYROTECHNICS
- High speed synchrotron x-ray phase contrast imaging of dynamic material response to split Hopkinson bar loading
- (2013) M. Hudspeth et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- A Review of Dynamic Experimental Techniques and Mechanical Behaviour of Rock Materials
- (2013) Q. B. Zhang et al. ROCK MECHANICS AND ROCK ENGINEERING
- Shock experiments up to 30 GPa and their consequences on microstructures and magnetic properties in pyrrhotite
- (2012) Christoph Mang et al. GEOCHEMISTRY GEOPHYSICS GEOSYSTEMS
- Annealing effect on the evolution of adiabatic shear band under dynamic shear loading in ultra-fine-grained iron
- (2012) Fuping Yuan et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Microstructural examination of quasi-static and dynamic shear in high-purity iron
- (2012) E.K. Cerreta et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Modeling periodic adiabatic shear band evolution during high speed machining Ti-6Al-4V alloy
- (2012) G.G. Ye et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Contact variables and thermal effects at the tool–chip interface in orthogonal cutting
- (2012) A. Molinari et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Experimental and numerical analysis of the martensitic transformation in AISI 304 steel sheets subjected to perforation by conical and hemispherical projectiles
- (2012) J.A. Rodríguez-Martínez et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Microstructure of adiabatic shear bands in Ti6Al4V
- (2012) J. Peirs et al. MATERIALS CHARACTERIZATION
- Shear band formation during hot compression of AZ31 Mg alloy sheets
- (2012) H.L. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characterization of adiabatic shear bands in the zirconium alloy impacted by split Hopkinson pressure bar at a strain rate of 6000s−1
- (2012) D.L. Zou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Shear-band toughness of bulk metallic glasses
- (2011) M.Q. Jiang et al. ACTA MATERIALIA
- Localized amorphism after high-strain-rate deformation in TWIP steel
- (2011) N. Li et al. ACTA MATERIALIA
- Microstructure and mechanical properties at different length scales and strain rates of nanocrystalline tantalum produced by high-pressure torsion
- (2011) Q. Wei et al. ACTA MATERIALIA
- Finite element simulation of high-speed machining of titanium alloy (Ti–6Al–4V) based on ductile failure model
- (2011) Guang Chen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Electro-magnetic collapse of thick-walled cylinders to investigate spontaneous shear localization
- (2011) Z. Lovinger et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Study of cutting deformation in machining nickel-based alloy Inconel 718
- (2011) Gao Dong et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Micromechanical analysis of strain rate-dependent deformation and failure in composite microstructures under dynamic loading conditions
- (2011) Yuli Chen et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Relating inhomogeneous deformation to local texture in zirconium through grain-scale digital image correlation strain mapping experiments
- (2011) H.A. Padilla et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Plastic flow in shock-loaded silver at strain rates from 104s−1to 107s−1and temperatures from 296 K to 1233 K
- (2011) E. B. Zaretsky et al. JOURNAL OF APPLIED PHYSICS
- Tensile fracture criterion of metallic glass
- (2011) R. T. Qu et al. JOURNAL OF APPLIED PHYSICS
- Grainsize evolution in ductile shear zones: Implications for strain localization and the strength of the lithosphere
- (2011) J.P. Platt et al. JOURNAL OF STRUCTURAL GEOLOGY
- Characterization of adiabatic shear bands in AM60B magnesium alloy under ballistic impact
- (2011) D.L. Zou et al. MATERIALS CHARACTERIZATION
- Microstructural evolution in adiabatic shear bands of copper at high strain rates: Electron backscatter diffraction characterization
- (2011) Lin Tang et al. MATERIALS CHARACTERIZATION
- Effect of phase composition on self-organization of shear bands in Ti-1300 titanium alloy
- (2011) Y. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Shear strength and shear failure, overview of testing and behavior of ductile metals
- (2011) Lothar W. Meyer et al. MECHANICS OF TIME-DEPENDENT MATERIALS
- A technique for combined dynamic compression-shear test
- (2011) P. D. Zhao et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Grain-scale experimental investigation of localised deformation in sand: a discrete particle tracking approach
- (2011) Edward Andò et al. Acta Geotechnica
- Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates
- (2010) I. Ulacia et al. ACTA MATERIALIA
- Effect of projectile nose shape on the ballistic resistance of ductile targets
- (2010) M.A. Iqbal et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Numerical and analytical modeling of orthogonal cutting: The link between local variables and global contact characteristics
- (2010) A. Molinari et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates
- (2010) Ryan A. Austin et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Modeling adiabatic shear failure from energy considerations
- (2010) M. Dolinski et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Deformed microstructure evolution in AM60B Mg alloy under hypervelocity impact at a velocity of 5kms−1
- (2010) D.L. Zou et al. MATERIALS & DESIGN
- Microstructure evolution of adiabatic shear bands in AM60B magnesium alloy under ballistic impact
- (2010) L. Zhen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Observation of the microstructure in the adiabatic shear band of 7075 aluminum alloy
- (2010) D.H. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On factors influencing the ductile-to-brittle transition in a bulk metallic glass
- (2009) R. Raghavan et al. ACTA MATERIALIA
- Modeling effects of crystalline microstructure, energy storage mechanisms, and residual volume changes on penetration resistance of precipitate-hardened aluminum alloys
- (2009) J.D. Clayton COMPOSITES PART B-ENGINEERING
- Effects of material microstructure on blunt projectile penetration of a nickel-based super alloy
- (2009) Jeffrey J. DeMange et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- The use of hat-shaped specimens to study the high strain rate shear behaviour of Ti–6Al–4V
- (2009) J. Peirs et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Shock compression of reactive powder mixtures
- (2009) D E Eakins et al. INTERNATIONAL MATERIALS REVIEWS
- Analysis and characterization by electron backscatter diffraction of microstructural evolution in the adiabatic shear bands in Fe–Cr–Ni alloys
- (2009) Huajie Yang et al. JOURNAL OF MATERIALS RESEARCH
- A different viewpoint on adiabatic shear localization
- (2009) D Rittel JOURNAL OF PHYSICS D-APPLIED PHYSICS
- On the origin of shear banding instability in metallic glasses
- (2009) M.Q. Jiang et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Dynamic deformation response of a high-strength, high-toughness Fe–10Ni–0.1C steel
- (2009) P. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolution associated with adiabatic shear bands and shear band failure in ballistic plug formation in Ti–6Al–4V targets
- (2009) L.E. Murr et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical Behavior and Microstructural Development of Low-Carbon Steel and Microcomposite Steel Reinforcement Bars Deformed under Quasi-Static and Dynamic Shear Loading
- (2009) L.M. Dougherty et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Prediction of shear-band thickness in metallic glasses
- (2009) M.Q. Jiang et al. SCRIPTA MATERIALIA
- Shear striations and deformation kinetics in highly deformed Zr-based bulk metallic glasses
- (2008) Florian H. Dalla Torre et al. ACTA MATERIALIA
- High-strain-rate response of ultra-fine-grained copper
- (2008) A. Mishra et al. ACTA MATERIALIA
- Instability of crack propagation in brittle bulk metallic glass
- (2008) G. Wang et al. ACTA MATERIALIA
- Effect of the Zener–Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation
- (2008) Y LI et al. ACTA MATERIALIA
- Shear band melting and serrated flow in metallic glasses
- (2008) K. Georgarakis et al. APPLIED PHYSICS LETTERS
- Influence of conical projectile diameter on perpendicular impact of thin steel plate
- (2008) A. Rusinek et al. ENGINEERING FRACTURE MECHANICS
- On perforation of ductile metallic plates by blunt rigid projectile
- (2008) X.W. Chen et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- High strain rate properties of metals and alloys
- (2008) R. W. Armstrong et al. INTERNATIONAL MATERIALS REVIEWS
- Strain localisation patterns under equal-channel angular pressing
- (2008) Rimma Lapovok et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Stress–strain characteristics of tin-based solder alloys at medium strain rate
- (2008) E.H. Wong et al. MATERIALS LETTERS
- The influence of microstructure on the mechanical response of copper in shear
- (2008) E.K. Cerreta et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Shear Localization in Dynamic Deformation: Microstructural Evolution
- (2008) Yongbo Xu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Energy dissipation in fracture of bulk metallic glasses via inherent competition between local softening and quasi-cleavage
- (2008) M. Q. Jiang et al. PHILOSOPHICAL MAGAZINE
- Dynamic Recrystallization as a Potential Cause for Adiabatic Shear Failure
- (2008) D. Rittel et al. PHYSICAL REVIEW LETTERS
- Numerical simulations of impact behaviour of thin steel plates subjected to cylindrical, conical and hemispherical non-deformable projectiles
- (2007) A. Arias et al. ENGINEERING FRACTURE MECHANICS
- A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V
- (2007) Madalina Calamaz et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Microstructure evolution in adiabatic shear band in fine-grain-sized Ti–3Al–5Mo–4.5V alloy
- (2007) B.F. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Temperature field measurement in titanium alloy during high strain rate loading—Adiabatic shear bands phenomenon
- (2007) N. Ranc et al. MECHANICS OF MATERIALS
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started