On adiabatic shear instability in impacts of micron-scale Al-6061 particles with sapphire and Al-6061 substrates
出版年份 2023 全文链接
标题
On adiabatic shear instability in impacts of micron-scale Al-6061 particles with sapphire and Al-6061 substrates
作者
关键词
-
出版物
INTERNATIONAL JOURNAL OF PLASTICITY
Volume 166, Issue -, Pages 103630
出版商
Elsevier BV
发表日期
2023-05-12
DOI
10.1016/j.ijplas.2023.103630
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Shear band formation in porous thin-walled tubes subjected to dynamic torsion
- (2022) A.R. Vishnu et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Ultrahigh strain rate-activated superplastic forming of aluminum and gold nanometals
- (2022) Jian Liu et al. MATERIALS & DESIGN
- Miniature Beryllium Split-Hopkinson Pressure Bars for Extending the Range of Achievable Strain-Rates
- (2022) Bryan Zuanetti et al. Metals
- Lode-dependent second porosity in porous plasticity for shear-dominated loadings
- (2022) Gilles Rousselier INTERNATIONAL JOURNAL OF PLASTICITY
- Anisotropic thermal-conductivity degradation in the phase-field method accounting for crack directionality
- (2021) Lampros Svolos et al. ENGINEERING FRACTURE MECHANICS
- Controllable additive manufacturing of gradient bulk metallic glass composite with high strength and tensile ductility
- (2021) Yunzhuo Lu et al. ACTA MATERIALIA
- Numerical modelling of particle impact and residual stresses in cold sprayed coatings: A review
- (2021) Ahmed Fardan et al. SURFACE & COATINGS TECHNOLOGY
- A mixed finite element formulation for ductile damage modeling of thermoviscoplastic metals accounting for void shearing
- (2021) João Paulo Pascon et al. COMPUTATIONAL MECHANICS
- Finite element analysis to determine the role of porosity in dynamic localization and fragmentation: Application to porous microstructures obtained from additively manufactured materials
- (2021) M. Marvi-Mashhadi et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Microstructure Quantification and Multiresolution Mechanical Characterization of Ti-Based Bulk Metallic Glass-Matrix Composites
- (2021) Ali Khosravani et al. JOM
- A physical-based unified constitutive model of AA7075 for a novel hot forming condition with pre-cooling
- (2021) Yong Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Structural evolution of a CuZr-based bulk metallic glass composite during cryogenic treatment observed by in-situ high-energy X-ray diffraction
- (2021) Peng Xue et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A novel micromechanics-enhanced phase-field model for frictional damage and fracture of quasi-brittle geomaterials
- (2021) Tao You et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Density, Microstructure, and Strain-Rate Effects on the Compressive Response of Polyurethane Foams
- (2021) K. B. Bhagavathula et al. EXPERIMENTAL MECHANICS
- Quasi-static and dynamic investigation of an advanced high strength and corrosion resistant 10 % Cr nanocomposite martensitic steel
- (2021) Saadi A. Habib et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- New insights into the role of porous microstructure on dynamic shear localization
- (2021) A.R. Vishnu et al. INTERNATIONAL JOURNAL OF PLASTICITY
- “Self-sharpening” tungsten high-entropy alloy
- (2020) Xing-Fa Liu et al. ACTA MATERIALIA
- Quasi-static and dynamic response, and texture evolution of two overaged Al 7056 alloy plates in T761 and T721 tempers: Experiments and modeling
- (2020) Angela Y. Ku et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Cyclic Strain Heterogeneity and Damage Formation in Rolled Magnesium Via In Situ Microscopic Image Correlation
- (2020) N. Shafaghi et al. EXPERIMENTAL MECHANICS
- Thermal-conductivity degradation across cracks in coupled thermo-mechanical systems modeled by the phase-field fracture method
- (2020) Lampros Svolos et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Towards joinability of thermal self-piercing riveting for AA7075-T6 aluminum alloy sheets under quasi-static loading conditions
- (2020) Liang Ying et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Porous plasticity revisited: Macroscopic and multiscale modeling
- (2020) Gilles Rousselier INTERNATIONAL JOURNAL OF PLASTICITY
- Grain refinement in hot working of 2219 aluminium alloy: On the effect of deformation mode and loading path
- (2020) X. Zeng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A modified Johnson-Cook material model with strain gradient plasticity consideration for numerical simulation of cold spray process
- (2020) Rohan Chakrabarty et al. SURFACE & COATINGS TECHNOLOGY
- High resolution digital image correlation mapping of strain localization upon room and high temperature, high cycle fatigue of a TiAl intermetallic alloy
- (2020) Thomas Edward James Edwards et al. INTERNATIONAL JOURNAL OF FATIGUE
- A three-pronged approach to predict the effect of plastic orthotropy on the formability of thin sheets subjected to dynamic biaxial stretching
- (2020) K.E. N’souglo et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Flow stress correction for hot compression of titanium alloys considering temperature gradient induced heterogeneous deformation
- (2020) H. Xiao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The combined effect of size, inertia and porosity on the indentation response of ductile materials
- (2020) T. dos Santos et al. MECHANICS OF MATERIALS
- A thermodynamic framework to predict ductile damage in thermoviscoplastic porous metals
- (2020) João Paulo Pascon et al. MECHANICS OF MATERIALS
- Shear localization in metallic materials at high strain rates
- (2020) Na Yan et al. PROGRESS IN MATERIALS SCIENCE
- Effects of Interface Bonding on the Residual Stresses in Cold-Sprayed Al-6061: A Numerical Investigation
- (2019) Enqiang Lin et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- An experimental study of the polycrystalline plasticity of lamellar titanium aluminide
- (2019) Thomas Edward James Edwards et al. INTERNATIONAL JOURNAL OF PLASTICITY
- In situ investigation of strain heterogeneity and microstructural shear bands in rolled Magnesium AZ31
- (2019) İ. Buğra Üçel et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Serration and shear avalanches in a ZrCu based bulk metallic glass composite in different loading methods
- (2019) Haichao Sun et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Slip bands in lamellar TiAl during high cycle fatigue microcompression by correlative total strain mapping, diffraction orientation mapping and transmission electron imaging
- (2019) Thomas Edward James Edwards et al. INTERNATIONAL JOURNAL OF FATIGUE
- Thermal forming limit diagram (TFLD) of AA7075 aluminum alloy based on a modified continuum damage model: Experimental and theoretical investigations
- (2019) Hai Rong et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Fracture of an anisotropic rare-earth-containing magnesium alloy (ZEK100) at different stress states and strain rates: Experiments and modeling
- (2019) Saadi A. Habib et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Grain morphology related microstructural developments in bulk deformation of 2219 aluminum alloy sheet at elevated temperature
- (2019) X. Zeng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Characterization of Aluminum 6061 Splats Cold Spray Deposited on Aluminum 6061-T6 Substrate
- (2019) Wendy C. Evans et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- In situ study of the shear band features of a CuZr-based bulk metallic glass composite
- (2019) Songshan Jiang et al. INTERMETALLICS
- Crystal plasticity analysis of deformation anisotropy of lamellar TiAl alloy: 3D microstructure-based modelling and in-situ micro-compression
- (2019) Liu Chen et al. INTERNATIONAL JOURNAL OF PLASTICITY
- On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminum alloy: Numerical and experimental investigation
- (2019) Liang Ying et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Enhanced tensile plasticity of a CuZr-based bulk metallic glass composite induced by ion irradiation
- (2019) Peng Xue et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- The mechanical performance and a rate-dependent constitutive model for Al3Ti compound
- (2019) Yang Cao et al. Defence Technology
- Mesoscale modeling of jet initiation behavior and microstructural evolution during cold spray single particle impact
- (2019) Sumit Suresh et al. ACTA MATERIALIA
- Investigation on mechanical behavior and plastic damage of AA7075 aluminum alloy by thermal small punch test: Experimental trials, numerical analysis
- (2019) Tianhan Gao et al. Journal of Manufacturing Processes
- Laser additive manufacturing of structural-graded bulk metallic glass
- (2018) Yunzhuo Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Achieving fine-grained equiaxed alpha via thermo-mechanical loading under off-equilibrium state in two-phase Ti-alloys
- (2018) M. Meng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A CuZr-based bulk metallic glass composite with excellent mechanical properties by optimizing microstructure
- (2018) Song-Shan Jiang et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- High-Strain-Rate Material Behavior and Adiabatic Material Instability in Impact of Micron-Scale Al-6061 Particles
- (2018) Qiyong Chen et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- On the instability of chip flow in high-speed machining
- (2018) G.G. Ye et al. MECHANICS OF MATERIALS
- Strain Localization during Equal-Channel Angular Pressing Analyzed by Finite Element Simulations
- (2018) Tobias Horn et al. Metals
- Adiabatic shear instability is not necessary for adhesion in cold spray
- (2018) Mostafa Hassani-Gangaraj et al. ACTA MATERIALIA
- Explicit and implicit methods for shear band modeling at high strain rates
- (2018) Luc Berger-Vergiat et al. COMPUTATIONAL MECHANICS
- Direct Determination of Structural Heterogeneity in Metallic Glasses Using Four-Dimensional Scanning Transmission Electron Microscopy
- (2018) Soohyun Im et al. ULTRAMICROSCOPY
- Thermal gradient and its contribution to size effect of specific cutting energy
- (2018) G. G. Ye et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Eddy current induced dynamic deformation behaviors of aluminum alloy during EMF: Modeling and quantitative characterization
- (2018) Hong-wei Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Response to Comment on “Adiabatic shear instability is not necessary for adhesion in cold spray”
- (2018) Mostafa Hassani-Gangaraj et al. SCRIPTA MATERIALIA
- Comment on ‘Adiabatic shear instability is not necessary for adhesion in cold spray’
- (2018) H. Assadi et al. SCRIPTA MATERIALIA
- Interaction of the Portevin–Le Chatelier phenomenon with ductile fracture of a thin aluminum CT specimen: experiments and simulations
- (2017) Gilles Rousselier et al. INTERNATIONAL JOURNAL OF FRACTURE
- Size effects on the mechanical properties of nanocrystalline NbMoTaW refractory high entropy alloy thin films
- (2017) X.B. Feng et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Combined stability analysis of phase-field dynamic fracture and shear band localization
- (2017) Miguel Arriaga et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Anisotropy, tension-compression asymmetry and texture evolution of a rare-earth-containing magnesium alloy sheet, ZEK100, at different strain rates and temperatures: Experiments and modeling
- (2017) Saadi A. Habib et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Multiple necking pattern in nonlinear elastic bars subjected to dynamic stretching: The role of defects and inertia
- (2017) A. Vaz-Romero et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- The critical neck spacing in ductile plates subjected to dynamic biaxial loading: On the interplay between loading path and inertia effects
- (2017) J.A. Rodríguez-Martínez et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Bending behavior of as-cast and annealed ZrCuNiAl bulk metallic glass
- (2017) Yongjiang Huang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Texture-dependent character of strain heterogeneity in Magnesium AZ31 under reversed loading
- (2017) Enver Kapan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation behavior and microstructure evolution during hot working of a coarse-grained Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy in beta phase field
- (2017) X.G. Fan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Onset and evolution of discontinuously segmented chip flow in ultra-high-speed cutting Ti-6Al-4V
- (2016) G. G. Ye et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Characterization and modeling of the strain rate sensitivity of polyetheretherketone’s compressive yield stress
- (2015) Zakaria El-Qoubaa et al. MATERIALS & DESIGN
- A Modified Eyring Equation for Modeling Yield and Flow Stresses of Metals at Strain Rates Ranging from 10−5to 5 × 104 s−1
- (2015) Ramzi Othman Advances in Materials Science and Engineering
- Integration of a new data acquisition/processing scheme in SHPB test and characterization of the dynamic material properties of high-strength steels using the optional form of Johnson-Cook model
- (2014) Brian J. Tuazon et al. Journal of Mechanical Science and Technology
- A Numerical Investigation Into Cold Spray Bonding Processes
- (2014) Baran Yildirim et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration
- (2014) J.-H. Lee et al. SCIENCE
- Temperature and strain rate effects in cold spray investigated by smoothed particle hydrodynamics
- (2014) V. Lemiale et al. SURFACE & COATINGS TECHNOLOGY
- Cold spray coating: review of material systems and future perspectives
- (2014) A. Moridi et al. SURFACE ENGINEERING
- Negative to positive strain rate sensitivity in 5xxx series aluminum alloys: Experiment and constitutive modeling
- (2013) Farhoud Kabirian et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Cold spray coating process for corrosion protection: a review
- (2013) N. Bala et al. SURFACE ENGINEERING
- An experimental–numerical investigation on aluminium tubes subjected to ballistic impact with soft core 7.62 ball projectiles
- (2013) Andrea Manes et al. THIN-WALLED STRUCTURES
- High strain rate deformation of layered nanocomposites
- (2012) Jae-Hwang Lee et al. Nature Communications
- Constitutive modelling of plasticity of fcc metals under extremely high strain rates
- (2011) C.Y. Gao et al. INTERNATIONAL JOURNAL OF PLASTICITY
- A dynamic punch method to quantify the dynamic shear strength of brittle solids
- (2011) S. Huang et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- 3D FEM simulations of shoulder milling operations on a 304L stainless steel
- (2011) A. Maurel-Pantel et al. SIMULATION MODELLING PRACTICE AND THEORY
- Modeling of high velocity impact of spherical particles
- (2011) Baran Yildirim et al. WEAR
- From Particle Acceleration to Impact and Bonding in Cold Spraying
- (2009) Tobias Schmidt et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now