A comparative study on microstructure, nanomechanical and corrosion behaviors of AlCoCuFeNi high entropy alloys fabricated by selective laser melting and laser metal deposition

Manufacturing of FeCoCrNi + FeCoCrNiAl laminated high-entropy alloy by laser melting deposition (LMD)

(2021) Yangchuan Cai et al.   MATERIALS LETTERS

Processing window for laser metal deposition of Al 7075 powder with minimized defects

(2021) M.J. Benoit et al.   Journal of Manufacturing Processes

Pressure- and temperature-dependent physical metallurgy in a face-centered cubic NiCoFeCrMn high entropy alloy and its subsystems

(2021) Md. Lokman Ali et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Study on the mechanism of heat input on the grain boundary distribution and impact toughness in CGHAZ of X100 pipeline steel from the aspect of variant

(2021) Xiaonan Qi et al.   MATERIALS CHARACTERIZATION

Phase transformation and morphological features in a cold-worked CrMnFeCoNi high entropy alloy with Al addition

(2021) Alok Singh et al.   MATERIALS CHARACTERIZATION

High temperature oxidation behavior of high entropy alloy Al4Co3Cr25Cu10Fe25Ni33 in oxygen-containing atmospheres

(2021) Feng-Yi Cho et al.   MATERIALS CHEMISTRY AND PHYSICS

Direct laser metal deposition additive manufacturing of Inconel 718 superalloy: Statistical modelling and optimization by design of experiments

(2021) Mahmoud Moradi et al.   OPTICS AND LASER TECHNOLOGY

Microstructure and tribological behaviors of FeCoCrNiMoSix high-entropy alloy coatings prepared by laser cladding

(2021) Yucheng Yang et al.   SURFACE & COATINGS TECHNOLOGY

Fabrication of laminated high entropy alloys using differences in laser melting deposition characteristics of FeCoCrNi and FeCoCrNiAl

(2021) Yangchuan Cai et al.   Journal of Manufacturing Processes

Cracking mechanism and mechanical properties of selective laser melted CoCrFeMnNi high entropy alloy using different scanning strategies

(2020) Chengcheng Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms

(2020) Ruidi Li et al.   ACTA MATERIALIA

Anisotropic corrosion behavior of Sc and Zr modified Al-Mg alloy produced by selective laser melting

(2020) Dongdong Gu et al.   CORROSION SCIENCE

A novel Cu-bearing high-entropy alloy with significant antibacterial behavior against corrosive marine biofilms

(2020) Enze Zhou et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

A novel Cu-doped high entropy alloy with excellent comprehensive performances for marine application

(2020) Yuan Yu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion

(2020) Yaojia Ren et al.   Virtual and Physical Prototyping

Comparative Study of Pure Iron Manufactured by Selective Laser Melting, Laser Metal Deposition, and Casting Processes

(2019) Danilo Carluccio et al.   ADVANCED ENGINEERING MATERIALS

The role of low angle grain boundary in deformation of titanium and its size effect

(2019) Sijing Chen et al.   SCRIPTA MATERIALIA

Evaluating elastic properties of a body-centered cubic NbHfZrTi high-entropy alloy – A direct comparison between experiments and ab initio calculations

(2019) Y.X. Ye et al.   INTERMETALLICS

Effect of Interlayer Cooling Time, Constraint and Tool Path Strategy on Deformation of Large Components Made by Laser Metal Deposition with Wire

(2019) Yousub Lee et al.   Applied Sciences-Basel

Nanoscale serration and creep characteristics of Al 0.5 CoCrCuFeNi high-entropy alloys

(2018) Shuying Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Phase composition of Al x FeNiCrCo high entropy alloys prepared by sintering and arc-melting methods

(2018) J. Cieslak et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructural stability and mechanical properties of equiatomic CoCrCuFeNi, CrCuFeMnNi, CoCrCuFeMn alloys

(2018) Seung Min Oh et al.   MATERIALS CHEMISTRY AND PHYSICS

Precipitation and its strengthening of Cu-rich phase in CrMnFeCoNiCu x high-entropy alloys

(2018) Xin Xian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Composition and phase structure dependence of mechanical and magnetic properties for AlCoCuFeNi high entropy alloys

(2018) Cong Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

High temperature wear in CoCrFeNiCux high entropy alloys: The role of Cu

(2018) A. Verma et al.   SCRIPTA MATERIALIA

Elemental segregation in an AlCoCrFeNi high-entropy alloy – A comparison between selective laser melting and induction melting

(2018) Dennis Karlsson et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Additively manufactured hierarchical stainless steels with high strength and ductility

(2017) Y. Morris Wang et al.   NATURE MATERIALS

Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys

(2017) D.H. Xiao et al.   MATERIALS & DESIGN

High-entropy alloy: challenges and prospects

(2016) Y.F. Ye et al.   Materials Today

Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi

(2016) E.J. Pickering et al.   SCRIPTA MATERIALIA

High entropy alloy thin films deposited by magnetron sputtering of powder targets

(2015) B.R. Braeckman et al.   THIN SOLID FILMS

Tribological behavior of AlCoCrCuFeNi and AlCoCrFeNiTi0.5 high entropy alloys under hydrogen peroxide solution against different counterparts

(2015) Yuan Yu et al.   TRIBOLOGY INTERNATIONAL

Effect of Nb addition on the structure and mechanical behaviors of CoCrCuFeNi high-entropy alloy coatings

(2014) J.B. Cheng et al.   SURFACE & COATINGS TECHNOLOGY

Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation-strengthened ferritic alloys

(2013) Y.R. Wen et al.   ACTA MATERIALIA

Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum

(2013) Lore Thijs et al.   ACTA MATERIALIA

Microstructure characterization of Cu-rich nanoprecipitates in a Fe–2.5 Cu–1.5 Mn–4.0 Ni–1.0 Al multicomponent ferritic alloy

(2013) Y.R. Wen et al.   ACTA MATERIALIA

Microstructures and properties of high-entropy alloys

(2013) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE