Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion

Recent Advances on High‐Entropy Alloys for 3D Printing

(2020) Changjun Han et al.   ADVANCED MATERIALS

Mesoscopic study of thermal behavior, fluid dynamics and surface morphology during selective laser melting of Ti-based composites

(2020) Donghua Dai et al.   COMPUTATIONAL MATERIALS SCIENCE

Microstructures and properties of equimolar AlCoCrCuFeNi high-entropy alloy additively manufactured by selective laser melting

(2020) Yin Wang et al.   INTERMETALLICS

Microstructures and Tribological Properties of TiC Reinforced FeCoNiCuAl High-Entropy Alloy at Normal and Elevated Temperature

(2020) Tie Zhu et al.   Metals

Microstructure and mechanical properties of (TiB+TiC)/Ti composites fabricated in situ via selective laser melting of Ti and B4C powders

(2020) Changjun Han et al.   Additive Manufacturing

In vitro degradation behavior and cytocompatibility of ZK30/bioactive glass composites fabricated by selective laser melting for biomedical applications

(2019) Yong Yin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication of high-strength AZ80 alloys via multidirectional forging in air with no need of ageing treatment

(2019) Xiaojie Zhou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review

(2019) W.H. Yu et al.   PROGRESS IN MATERIALS SCIENCE

Nanoindentation studies of the mechanical behaviours of spark plasma sintered multiwall carbon nanotubes reinforced Ti6Al4V nanocomposites

(2019) Avwerosuoghene Moses Okoro et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nanomechanical characterization of nanostructured La2(Zr0.75Ce0.25)2O7 thermal barrier coatings by nanoindentation

(2019) F.F. Zhou et al.   APPLIED SURFACE SCIENCE

Improvement on mechanical properties and corrosion resistance of titanium-tantalum alloys in-situ fabricated via selective laser melting

(2019) Danlei Zhao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Development of Fe-Co-Cr-Mn-Ni-C high entropy cast iron (HE cast iron) available for casting in air atmosphere

(2019) Takeshi Nagase et al.   MATERIALS & DESIGN

Spark plasma sintering of low modulus titanium-niobium-tantalum-zirconium (TNTZ) alloy for biomedical applications

(2019) Nicholas Mavros et al.   MATERIALS & DESIGN

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

(2019) E.P. George et al.   ACTA MATERIALIA

On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi

(2018) Soheil Saedi et al.   ACTA MATERIALIA

High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating

(2018) Guo Jin et al.   APPLIED SURFACE SCIENCE

Fracture mechanisms of a Mo alloyed CoCrFeNi high entropy alloy: In-situ SEM investigation

(2018) W.P. Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Wear characteristics of hybrid aluminum-matrix composites reinforced with well-dispersed reduced graphene oxide nanosheets and silicon carbide particulates

(2018) Xiang Zeng et al.   VACUUM

Ultrahard bulk nanocrystalline VNbMoTaW high-entropy alloy

(2018) S.W. Xin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of FeCoCrNiNb high-entropy alloy coatings

(2018) Qihong Fang et al.   PHYSICA B-CONDENSED MATTER

Tribological behavior of cBN-WC-10Co composites for dry reciprocating sliding wear

(2018) Cong Mao et al.   CERAMICS INTERNATIONAL

Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy

(2018) Z.H. Xiong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys

(2018) Zezhou Li et al.   PROGRESS IN MATERIALS SCIENCE

Beta titanium single crystal with bone-like elastic modulus and large crystallographic elastic anisotropy

(2018) Pan Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The effects of phase constitution on magnetic and mechanical properties of FeCoNi(CuAl) x ( x  = 0–1.2) high-entropy alloys

(2017) Q. Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC Al x CoCrFeNi high entropy alloys

(2017) Jithin Joseph et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Grain growth during selective laser melting of a Co–Cr–Mo alloy

(2017) Z. W. Chen et al.   JOURNAL OF MATERIALS SCIENCE

A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition

(2017) Mingming Ma et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Additively manufactured hierarchical stainless steels with high strength and ductility

(2017) Y. Morris Wang et al.   NATURE MATERIALS

Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus

(2017) Takuya Ishimoto et al.   SCRIPTA MATERIALIA

A combinatorial assessment of Al x CrCuFeNi 2 (0 

(2016) T. Borkar et al.   ACTA MATERIALIA

Additive manufacturing of metals

(2016) Dirk Herzog et al.   ACTA MATERIALIA

Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms

(2016) Mujian Xia et al.   Science Bulletin

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl 0.5 high-entropy alloy

(2015) X.D. Xu et al.   ACTA MATERIALIA

Effect of metal vaporization behavior on keyhole-mode surface morphology of selective laser melted composites using different protective atmospheres

(2015) Donghua Dai et al.   APPLIED SURFACE SCIENCE

First principles theoretical investigations of low Young's modulus beta Ti–Nb and Ti–Nb–Zr alloys compositions for biomedical applications

(2015) Rajamallu Karre et al.   Materials Science & Engineering C-Materials for Biological Applications

Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted Al x CoCrFeNi high entropy alloys

(2015) Jithin Joseph et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)

(2015) Karsten Kunze et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tribological and corrosion properties of Al–12Si produced by selective laser melting

(2014) K.G. Prashanth et al.   JOURNAL OF MATERIALS RESEARCH

A fracture-resistant high-entropy alloy for cryogenic applications

(2014) B. Gludovatz et al.   SCIENCE

A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures

(2014) Khaled M. Youssef et al.   Materials Research Letters

Why does titanium alloy wear cobalt chrome alloy despite lower bulk hardness: A nanoindentation study?

(2013) N. Moharrami et al.   THIN SOLID FILMS

Characterization of the Young's modulus and residual stresses for a sputtered silicon oxynitride film using micro-structures

(2013) Jian Dong et al.   THIN SOLID FILMS