An Overview of Various Additive Manufacturing Technologies and Materials for Electrochemical Energy Conversion Applications
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
An Overview of Various Additive Manufacturing Technologies and Materials for Electrochemical Energy Conversion Applications
Authors
Keywords
-
Journal
ACS Omega
Volume -, Issue -, Pages -
Publisher
American Chemical Society (ACS)
Online
2022-11-03
DOI
10.1021/acsomega.2c05096
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Additive Manufacturing of Thermoelectrics: Emerging Trends and Outlook
- (2022) Danwei Zhang et al. ACS Energy Letters
- 3D printed anode electrodes for microbial electrolysis cells
- (2022) Furkan Baş et al. FUEL
- A new and simple way to prepare monolithic solid oxide fuel cell stack by stereolithography 3D printing technology using 8 mol% yttria stabilized zirconia photocurable slurry
- (2022) Kaijie Jia et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- A review of 3D printed porous ceramics
- (2022) Feng Zhang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Development of Pt coated SS316 mesh gas diffusion electrodes for a PEM water electrolyzer anode
- (2022) Murat Kıstı et al. FUEL
- Ni-Pt coating on graphene based 3D printed electrodes for hydrogen evolution reactions in alkaline media
- (2022) Bulut Hüner et al. FUEL
- Additive Manufacturing Processes in Medical Applications
- (2021) Mika Salmi Materials
- A review on amorphous noble-metal-based electrocatalysts for fuel cells: Synthesis, characterization, performance, and future perspective
- (2021) Quoc Tuan Phan et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Cellulose and Graphene Based Polyurethane Nanocomposites for FDM 3D Printing: Filament Properties and Printability
- (2021) Izaskun Larraza et al. Polymers
- Green activation using reducing agents of carbon-based 3D printed electrodes: Turning good electrodes to great
- (2021) Edurne Redondo et al. CARBON
- Expert elicitation survey predicts 37% to 49% declines in wind energy costs by 2050
- (2021) Ryan Wiser et al. Nature Energy
- 5 kW SOFC stack via 3D printing manufacturing: An evaluation of potential environmental benefits
- (2021) Victor J. Ferreira et al. APPLIED ENERGY
- A Review of Conductive Carbon Materials for 3D Printing: Materials, Technologies, Properties, and Applications
- (2021) Yanling Zheng et al. Materials
- 3D printing technology; methods, biomedical applications, future opportunities and trends
- (2021) Yahya Bozkurt et al. Journal of Materials Research and Technology-JMR&T
- 3D printing of reduced graphene oxide aerogels for energy storage devices: A paradigm from materials and technologies to applications
- (2021) Binbin Guo et al. Energy Storage Materials
- Multimaterial Vat Polymerization Additive Manufacturing
- (2021) Kathleen L. Sampson et al. ACS Applied Polymer Materials
- Synthesis of 3D printing materials and their electrochemical applications
- (2021) Huijie Zhou et al. CHINESE CHEMICAL LETTERS
- Electrodeposition of NiCu bimetal on 3D printed electrodes for hydrogen evolution reactions in alkaline media
- (2021) Bulut Hüner et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Trace Analysis of Heavy Metals (Cd, Pb, Hg) Using Native and Modified 3D Printed Graphene/Poly(Lactic Acid) Composite Electrodes
- (2020) John G. Walters et al. ELECTROANALYSIS
- Thermally drawn advanced functional fibers: New frontier of flexible electronics
- (2020) Wei Yan et al. Materials Today
- A brief introduction to the selective laser melting of Ti6Al4V powders by supreme-speed plasma rotating electrode process
- (2020) Yang Liu et al. Progress in Natural Science-Materials International
- Additive-manufactured sensors for biofuel analysis: copper determination in bioethanol using a 3D-printed carbon black/polylactic electrode
- (2020) Afonso F. João et al. ANALYTICAL AND BIOANALYTICAL CHEMISTRY
- Improving PEM water electrolyser’s performance by magnetic field application
- (2020) Mehmet Fatih Kaya et al. APPLIED ENERGY
- Additive Manufacturing of Epoxy Resins: Materials, Methods, and Latest Trends
- (2020) Mazhar Peerzada et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- A review of advances in the preparation and application of polyaniline based thermoset blends and composites
- (2020) Jolly Bhadra et al. JOURNAL OF POLYMER RESEARCH
- Thin wall deposition of IN625 using directed energy deposition
- (2020) Myong Joon Kim et al. Journal of Manufacturing Processes
- High-Performance Cyanate Ester Resins with Interpenetration Networks for 3D Printing
- (2020) Zhao-Xi Zhou et al. ACS Applied Materials & Interfaces
- Evolution of 3D Printing Methods and Materials for Electrochemical Energy Storage
- (2020) Vladimir Egorov et al. ADVANCED MATERIALS
- Powder-Based 3D Printing for the Fabrication of Device with Micro and Mesoscale Features
- (2020) Seow Yong Chin et al. Micromachines
- 3D printing technologies: techniques, materials, and post-processing
- (2020) Ilbey Karakurt et al. Current Opinion in Chemical Engineering
- Inkjet Bioprinting of Biomaterials
- (2020) Xinda Li et al. CHEMICAL REVIEWS
- Phenomenological modelling of direct laser metal deposition for single tracks
- (2020) Marco Mazzarisi et al. The International Journal of Advanced Manufacturing Technology
- Effect of Heat-Treatment on the Microstructure, Mechanical Properties and Corrosion Behaviour of SS 316 Structures Built by Laser Directed Energy Deposition Based Additive Manufacturing
- (2020) K. Benarji et al. METALS AND MATERIALS INTERNATIONAL
- Catalyst coating of 3D printed structures via electrochemical deposition: Case of the transition metal chalcogenide MoSx for hydrogen evolution reaction
- (2020) Christian Iffelsberger et al. Applied Materials Today
- A comprehensive review of the methods and mechanisms for powder feedstock handling in directed energy deposition
- (2020) Ambrish Singh et al. Additive Manufacturing
- 3D-printed reduced graphene oxide/polylactic acid electrodes: A new prototyped platform for sensing and biosensing applications
- (2020) Vinicius A.O.P. Silva et al. BIOSENSORS & BIOELECTRONICS
- Dip-coating of MXene and transition metal dichalcogenides on 3D-printed nanocarbon electrodes for the hydrogen evolution reaction
- (2020) K.P. Akshay Kumar et al. ELECTROCHEMISTRY COMMUNICATIONS
- Performance of a Thermally Regenerative Battery with 3D-Printed Cu/C Composite Electrodes: Effect of Electrode Pore Size
- (2020) Pengyu Chen et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Shape-Versatile 3D Thermoelectric Generators by Additive Manufacturing
- (2020) Md Mofasser Mallick et al. ACS Energy Letters
- 3D printed supercapacitor using porous carbon derived from packaging waste
- (2020) Mohanad Idrees et al. Additive Manufacturing
- Polyamide-nanodiamond filament
- (2020) Shadi Houshyar et al. MATERIALS LETTERS
- A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
- (2019) Zengguang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Corrosion properties of 304L stainless steel made by directed energy deposition additive manufacturing
- (2019) Michael A. Melia et al. CORROSION SCIENCE
- Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties
- (2019) Abolfazl Azarniya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Atomic Layer Deposition as a General Method Turns any 3D‐Printed Electrode into a Desired Catalyst: Case Study in Photoelectrochemisty
- (2019) Michelle P. Browne et al. Advanced Energy Materials
- Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting
- (2019) Majid Laleh et al. CORROSION SCIENCE
- 3D-printed Ag/AgCl pseudo-reference electrodes
- (2019) Nasuha Rohaizad et al. ELECTROCHEMISTRY COMMUNICATIONS
- 110th Anniversary: Vat Photopolymerization-based Additive Manufacturing: Current Trends and Future Directions in Materials Design
- (2019) Gayan A. Appuhamillage et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Emerging approach in semiconductor photocatalysis: Towards 3D architectures for efficient solar fuels generation in semi-artificial photosynthetic systems
- (2019) Chong-Yong Lee et al. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS
- Direct metal fabrication in rapid prototyping: A review
- (2019) Naveed Ahmed Journal of Manufacturing Processes
- State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
- (2019) Adrita Dass et al. Coatings
- Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives
- (2019) Balasubramanian Nagarajan et al. Engineering
- One-step electrodeposition of copper on conductive 3D printed objects
- (2019) Myung Jun Kim et al. Additive Manufacturing
- Preserving Fine Structure Details and Dramatically Enhancing Electron Transfer Rates in Graphene 3D-Printed Electrodes via Thermal Annealing: Toward Nitroaromatic Explosives Sensing
- (2019) Filip Novotný et al. ACS Applied Materials & Interfaces
- Binder jetting: A review of process, materials, and methods
- (2019) Mohsen Ziaee et al. Additive Manufacturing
- 3D Printing of Interdigitated Dielectric Elastomer Actuators
- (2019) Alex Chortos et al. ADVANCED FUNCTIONAL MATERIALS
- Engineering inkjet bioprinting processes toward translational therapies
- (2019) Ioannis Angelopoulos et al. BIOTECHNOLOGY AND BIOENGINEERING
- Dense 8 mol% yttria-stabilized zirconia electrolyte by DLP stereolithography
- (2019) Bohang Xing et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Ni−Fe (Oxy)hydroxide Modified Graphene Additive Manufactured (3D‐Printed) Electrochemical Platforms as an Efficient Electrocatalyst for the Oxygen Evolution Reaction
- (2019) Pãmyla L. Santos et al. ChemElectroChem
- 3D Printing of Bio-Based Polycarbonate and Its Potential Applications in Ecofriendly Indoor Manufacturing
- (2019) Seong Je Park et al. Additive Manufacturing
- Copper electroplating of 3D printed composite electrodes
- (2019) Eva Vaněčková et al. JOURNAL OF ELECTROANALYTICAL CHEMISTRY
- 3D printed polylactic acid/carbon black electrodes with nearly ideal electrochemical behaviour
- (2019) Eva Vaněčková et al. JOURNAL OF ELECTROANALYTICAL CHEMISTRY
- Effects of Filament Extrusion, 3D Printing and Hot-Pressing on Electrical and Tensile Properties of Poly(Lactic) Acid Composites Filled with Carbon Nanotubes and Graphene
- (2019) Giovanni Spinelli et al. Nanomaterials
- Multiscale ceramic components from preceramic polymers by hybridization of vat polymerization-based technologies
- (2019) Johanna Schmidt et al. Additive Manufacturing
- 3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis
- (2018) C. Lorena Manzanares Palenzuela et al. ANALYTICAL CHEMISTRY
- Fully printed and integrated electrolyzer cells with additive manufacturing for high-efficiency water splitting
- (2018) Gaoqiang Yang et al. APPLIED ENERGY
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- The effect of additive manufacturing on global energy demand: An assessment using a bottom-up approach
- (2018) Leendert A. Verhoef et al. ENERGY POLICY
- Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling
- (2018) Shenglong Jiang et al. HIGH PERFORMANCE POLYMERS
- FDM process parameters influence over the mechanical properties of polymer specimens: A review
- (2018) Diana Popescu et al. POLYMER TESTING
- A review of powder additive manufacturing processes for metallic biomaterials
- (2018) W.S.W. Harun et al. POWDER TECHNOLOGY
- Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
- (2018) Chuan Yi Foo et al. Scientific Reports
- The effects of printing orientation on the electrochemical behaviour of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes
- (2018) Hairul Hisham Bin Hamzah et al. Scientific Reports
- 3D printing of high performance cyanate ester thermoset polymers
- (2018) Swetha Chandrasekaran et al. Journal of Materials Chemistry A
- 3D printed porous carbon anode for enhanced power generation in microbial fuel cell
- (2018) Bin Bian et al. Nano Energy
- Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
- (2018) Peng Qin et al. ACS Biomaterials-Science & Engineering
- Improved corrosion behavior of ultrafine-grained eutectic Al-12Si alloy produced by selective laser melting
- (2018) Yan Yang et al. MATERIALS & DESIGN
- 3D Printed Electrodes for Improved Gas Reactant Transport for Electrochemical Reactions
- (2018) Tânia Machado Benedetti et al. 3D Printing and Additive Manufacturing
- Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
- (2018) Peng Qin et al. ACS Biomaterials Science & Engineering
- Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries
- (2018) Meng Cheng et al. ADVANCED MATERIALS
- Mechanical performance of PEEK produced by additive manufacturing
- (2018) T.J. Hoskins et al. POLYMER TESTING
- Femtosecond Laser Produced Hydrophobic Hierarchical Structures on Additive Manufacturing Parts
- (2018) Lishi Jiao et al. Nanomaterials
- 3D Printed Graphene Electrodes’ Electrochemical Activation
- (2018) Michelle P. Browne et al. ACS Applied Materials & Interfaces
- 3D Printed Terahertz Rectangular Waveguides of Polystyrene and TOPAS: a Comparison
- (2018) R. Guo et al. Journal of Infrared Millimeter and Terahertz Waves
- All-printed solid-state substrate-versatile and high-performance micro-supercapacitors for in situ fabricated transferable and wearable energy storage via multi-material 3D printing
- (2018) Yan Zhang et al. JOURNAL OF POWER SOURCES
- 3D printing of ceramics: A review
- (2018) Zhangwei Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Evaluation of commercially available polylactic acid (PLA) filaments for 3D printing applications
- (2018) Bruna Driussi Mistro Matos et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Direct laser metal deposition of Inconel 738
- (2018) A. Ramakrishnan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Multimaterial 3D-Printed Water Electrolyzer with Earth-Abundant Electrodeposited Catalysts
- (2018) Adriano Ambrosi et al. ACS Sustainable Chemistry & Engineering
- Hierarchical 3D electrodes for electrochemical energy storage
- (2018) Hongtao Sun et al. Nature Reviews Materials
- Macroporous epoxy-carbon fiber structures with a sacrificial 3D printed polymeric mesh suppresses electromagnetic radiation
- (2018) Saswat Mishra et al. CHEMICAL ENGINEERING JOURNAL
- Additive manufactured bipolar plate for high-efficiency hydrogen production in proton exchange membrane electrolyzer cells
- (2017) Gaoqiang Yang et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Additive Manufacturing of Metallic Materials: A Review
- (2017) Yi Zhang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Biodegradable poly(lactic acid)-based scaffolds: synthesis and biomedical applications
- (2017) Mustafa Abu Ghalia et al. JOURNAL OF POLYMER RESEARCH
- Three-dimensional printed yttria-stabilized zirconia self-supported electrolytes for solid oxide fuel cell applications
- (2017) S. Masciandaro et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Effect of post weld heat treatment on the 6061 aluminum alloy produced by ultrasonic additive manufacturing
- (2017) M.N. Gussev et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The role of microstructure on the mechanical properties of polyurethane foams containing thermoregulating microcapsules
- (2017) Angel Serrano et al. POLYMER TESTING
- 3D-Printed Conical Arrays of TiO2 Electrodes for Enhanced Photoelectrochemical Water Splitting
- (2017) Chong-Yong Lee et al. Advanced Energy Materials
- Three-dimensional printed cellular stainless steel as a high-activity catalytic electrode for oxygen evolution
- (2017) Xiaolei Huang et al. Journal of Materials Chemistry A
- Additive Manufacturing: Unlocking the Evolution of Energy Materials
- (2017) Adilet Zhakeyev et al. Advanced Science
- Resistivity and Its Anisotropy Characterization of 3D-Printed Acrylonitrile Butadiene Styrene Copolymer (ABS)/Carbon Black (CB) Composites
- (2017) Jie Zhang et al. Applied Sciences-Basel
- Current Status and Challenges in Printed Batteries: Toward Form Factor-Free, Monolithic Integrated Power Sources
- (2017) Keun-Ho Choi et al. ACS Energy Letters
- 3D Printed Graphene Based Energy Storage Devices
- (2017) Christopher W. Foster et al. Scientific Reports
- Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
- (2016) Daeho Hong et al. Acta Biomaterialia
- A Flexible Quasi-Solid-State Nickel-Zinc Battery with High Energy and Power Densities Based on 3D Electrode Design
- (2016) Jinping Liu et al. ADVANCED MATERIALS
- 3D-printing technologies for electrochemical applications
- (2016) Adriano Ambrosi et al. CHEMICAL SOCIETY REVIEWS
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- All-Polystyrene 3D-Printed Electrochemical Device with Embedded Carbon Nanofiber-Graphite-Polystyrene Composite Conductor
- (2016) Zuhayr Rymansaib et al. ELECTROANALYSIS
- The survey of key technologies in hydrogen energy storage
- (2016) Fan Zhang et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Process improvements and characterization of ultrasonic additive manufactured structures
- (2016) P.J. Wolcott et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a review
- (2016) Sharon Olivera et al. JOURNAL OF MATERIALS SCIENCE
- Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications
- (2016) Jayasheelan Vaithilingam et al. Materials Science & Engineering C-Materials for Biological Applications
- Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
- (2016) Amanda J. Sterling et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of additive manufactured, powder-bed laser-fused materials
- (2016) Todd M. Mower et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High performance polymer nanocomposites for additive manufacturing applications
- (2016) Al C. de Leon et al. REACTIVE & FUNCTIONAL POLYMERS
- Three dimensional printing of high dielectric capacitor using projection based stereolithography method
- (2016) Yang Yang et al. Nano Energy
- Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
- (2016) Khairul Amilin Ibrahim et al. MATERIALS & DESIGN
- Preserving rapid prototypes: a review
- (2016) Carolien Coon et al. Heritage Science
- Helical 3D-Printed Metal Electrodes as Custom-Shaped 3D Platform for Electrochemical Devices
- (2015) Adriano Ambrosi et al. ADVANCED FUNCTIONAL MATERIALS
- Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering
- (2015) Arghavan Farzadi et al. CERAMICS INTERNATIONAL
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
- (2015) Fuda Ning et al. COMPOSITES PART B-ENGINEERING
- Microstructural and mechanical characterization of Ti6Al4V refurbished parts obtained by laser metal deposition
- (2015) Ramesh Raju et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An exploration of binder jetting of copper
- (2015) Yun Bai et al. RAPID PROTOTYPING JOURNAL
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Optimization of fused deposition modeling process parameters: a review of current research and future prospects
- (2015) Omar A. Mohamed et al. Advances in Manufacturing
- FDM 3D Printing Technology in Manufacturing Composite Elements
- (2014) P. Dudek ARCHIVES OF METALLURGY AND MATERIALS
- Three dimensional (3D) printed electrodes for interdigitated supercapacitors
- (2014) Chen Zhao et al. ELECTROCHEMISTRY COMMUNICATIONS
- Bio-inspired flow field designs for polymer electrolyte membrane fuel cells
- (2014) Nannan Guo et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
- (2014) Yong Huang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Electrochemical properties of vanadium oxide coatings grown by hydrothermal synthesis on FTO substrates
- (2013) D. Vernardou et al. NEW JOURNAL OF CHEMISTRY
- Electrochemical properties of vanadium oxide coatings grown by APCVD on glass substrates
- (2013) D. Louloudakis et al. SURFACE & COATINGS TECHNOLOGY
- Performance of sinking EDM electrodes made by selective laser sintering technique
- (2012) Fred L. Amorim et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- 3D lithium ion batteries—from fundamentals to fabrication
- (2011) Matthew Roberts et al. JOURNAL OF MATERIALS CHEMISTRY
- Three-dimensional electrodes and battery architectures
- (2011) Timothy S. Arthur et al. MRS BULLETIN
- A review on global solar energy policy
- (2011) K.H. Solangi et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Fabrication of modified graphite bipolar plates by indirect selective laser sintering (SLS) for direct methanol fuel cells
- (2010) Kaushik Alayavalli et al. RAPID PROTOTYPING JOURNAL
- Parametric appraisal of mechanical property of fused deposition modelling processed parts
- (2009) Anoop Kumar Sood et al. MATERIALS & DESIGN
- Stability of ABS compounds subjected to repeated cycles of extrusion processing
- (2009) E.-K. Karahaliou et al. POLYMER ENGINEERING AND SCIENCE
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started