An Overview of Various Additive Manufacturing Technologies and Materials for Electrochemical Energy Conversion Applications
出版年份 2022 全文链接
标题
An Overview of Various Additive Manufacturing Technologies and Materials for Electrochemical Energy Conversion Applications
作者
关键词
-
出版物
ACS Omega
Volume -, Issue -, Pages -
出版商
American Chemical Society (ACS)
发表日期
2022-11-03
DOI
10.1021/acsomega.2c05096
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Additive Manufacturing of Thermoelectrics: Emerging Trends and Outlook
- (2022) Danwei Zhang et al. ACS Energy Letters
- 3D printed anode electrodes for microbial electrolysis cells
- (2022) Furkan Baş et al. FUEL
- A new and simple way to prepare monolithic solid oxide fuel cell stack by stereolithography 3D printing technology using 8 mol% yttria stabilized zirconia photocurable slurry
- (2022) Kaijie Jia et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- A review of 3D printed porous ceramics
- (2022) Feng Zhang et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Development of Pt coated SS316 mesh gas diffusion electrodes for a PEM water electrolyzer anode
- (2022) Murat Kıstı et al. FUEL
- Ni-Pt coating on graphene based 3D printed electrodes for hydrogen evolution reactions in alkaline media
- (2022) Bulut Hüner et al. FUEL
- Additive Manufacturing Processes in Medical Applications
- (2021) Mika Salmi Materials
- A review on amorphous noble-metal-based electrocatalysts for fuel cells: Synthesis, characterization, performance, and future perspective
- (2021) Quoc Tuan Phan et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Cellulose and Graphene Based Polyurethane Nanocomposites for FDM 3D Printing: Filament Properties and Printability
- (2021) Izaskun Larraza et al. Polymers
- Green activation using reducing agents of carbon-based 3D printed electrodes: Turning good electrodes to great
- (2021) Edurne Redondo et al. CARBON
- Expert elicitation survey predicts 37% to 49% declines in wind energy costs by 2050
- (2021) Ryan Wiser et al. Nature Energy
- 5 kW SOFC stack via 3D printing manufacturing: An evaluation of potential environmental benefits
- (2021) Victor J. Ferreira et al. APPLIED ENERGY
- A Review of Conductive Carbon Materials for 3D Printing: Materials, Technologies, Properties, and Applications
- (2021) Yanling Zheng et al. Materials
- 3D printing technology; methods, biomedical applications, future opportunities and trends
- (2021) Yahya Bozkurt et al. Journal of Materials Research and Technology-JMR&T
- 3D printing of reduced graphene oxide aerogels for energy storage devices: A paradigm from materials and technologies to applications
- (2021) Binbin Guo et al. Energy Storage Materials
- Multimaterial Vat Polymerization Additive Manufacturing
- (2021) Kathleen L. Sampson et al. ACS Applied Polymer Materials
- Synthesis of 3D printing materials and their electrochemical applications
- (2021) Huijie Zhou et al. CHINESE CHEMICAL LETTERS
- Electrodeposition of NiCu bimetal on 3D printed electrodes for hydrogen evolution reactions in alkaline media
- (2021) Bulut Hüner et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Trace Analysis of Heavy Metals (Cd, Pb, Hg) Using Native and Modified 3D Printed Graphene/Poly(Lactic Acid) Composite Electrodes
- (2020) John G. Walters et al. ELECTROANALYSIS
- Thermally drawn advanced functional fibers: New frontier of flexible electronics
- (2020) Wei Yan et al. Materials Today
- A brief introduction to the selective laser melting of Ti6Al4V powders by supreme-speed plasma rotating electrode process
- (2020) Yang Liu et al. Progress in Natural Science-Materials International
- Additive-manufactured sensors for biofuel analysis: copper determination in bioethanol using a 3D-printed carbon black/polylactic electrode
- (2020) Afonso F. João et al. ANALYTICAL AND BIOANALYTICAL CHEMISTRY
- Improving PEM water electrolyser’s performance by magnetic field application
- (2020) Mehmet Fatih Kaya et al. APPLIED ENERGY
- Additive Manufacturing of Epoxy Resins: Materials, Methods, and Latest Trends
- (2020) Mazhar Peerzada et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- A review of advances in the preparation and application of polyaniline based thermoset blends and composites
- (2020) Jolly Bhadra et al. JOURNAL OF POLYMER RESEARCH
- Thin wall deposition of IN625 using directed energy deposition
- (2020) Myong Joon Kim et al. Journal of Manufacturing Processes
- High-Performance Cyanate Ester Resins with Interpenetration Networks for 3D Printing
- (2020) Zhao-Xi Zhou et al. ACS Applied Materials & Interfaces
- Evolution of 3D Printing Methods and Materials for Electrochemical Energy Storage
- (2020) Vladimir Egorov et al. ADVANCED MATERIALS
- Powder-Based 3D Printing for the Fabrication of Device with Micro and Mesoscale Features
- (2020) Seow Yong Chin et al. Micromachines
- 3D printing technologies: techniques, materials, and post-processing
- (2020) Ilbey Karakurt et al. Current Opinion in Chemical Engineering
- Inkjet Bioprinting of Biomaterials
- (2020) Xinda Li et al. CHEMICAL REVIEWS
- Phenomenological modelling of direct laser metal deposition for single tracks
- (2020) Marco Mazzarisi et al. The International Journal of Advanced Manufacturing Technology
- Effect of Heat-Treatment on the Microstructure, Mechanical Properties and Corrosion Behaviour of SS 316 Structures Built by Laser Directed Energy Deposition Based Additive Manufacturing
- (2020) K. Benarji et al. METALS AND MATERIALS INTERNATIONAL
- Catalyst coating of 3D printed structures via electrochemical deposition: Case of the transition metal chalcogenide MoSx for hydrogen evolution reaction
- (2020) Christian Iffelsberger et al. Applied Materials Today
- A comprehensive review of the methods and mechanisms for powder feedstock handling in directed energy deposition
- (2020) Ambrish Singh et al. Additive Manufacturing
- 3D-printed reduced graphene oxide/polylactic acid electrodes: A new prototyped platform for sensing and biosensing applications
- (2020) Vinicius A.O.P. Silva et al. BIOSENSORS & BIOELECTRONICS
- Dip-coating of MXene and transition metal dichalcogenides on 3D-printed nanocarbon electrodes for the hydrogen evolution reaction
- (2020) K.P. Akshay Kumar et al. ELECTROCHEMISTRY COMMUNICATIONS
- Performance of a Thermally Regenerative Battery with 3D-Printed Cu/C Composite Electrodes: Effect of Electrode Pore Size
- (2020) Pengyu Chen et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Shape-Versatile 3D Thermoelectric Generators by Additive Manufacturing
- (2020) Md Mofasser Mallick et al. ACS Energy Letters
- 3D printed supercapacitor using porous carbon derived from packaging waste
- (2020) Mohanad Idrees et al. Additive Manufacturing
- Polyamide-nanodiamond filament
- (2020) Shadi Houshyar et al. MATERIALS LETTERS
- A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
- (2019) Zengguang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Corrosion properties of 304L stainless steel made by directed energy deposition additive manufacturing
- (2019) Michael A. Melia et al. CORROSION SCIENCE
- Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties
- (2019) Abolfazl Azarniya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Atomic Layer Deposition as a General Method Turns any 3D‐Printed Electrode into a Desired Catalyst: Case Study in Photoelectrochemisty
- (2019) Michelle P. Browne et al. Advanced Energy Materials
- Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting
- (2019) Majid Laleh et al. CORROSION SCIENCE
- 3D-printed Ag/AgCl pseudo-reference electrodes
- (2019) Nasuha Rohaizad et al. ELECTROCHEMISTRY COMMUNICATIONS
- 110th Anniversary: Vat Photopolymerization-based Additive Manufacturing: Current Trends and Future Directions in Materials Design
- (2019) Gayan A. Appuhamillage et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Emerging approach in semiconductor photocatalysis: Towards 3D architectures for efficient solar fuels generation in semi-artificial photosynthetic systems
- (2019) Chong-Yong Lee et al. JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY C-PHOTOCHEMISTRY REVIEWS
- Direct metal fabrication in rapid prototyping: A review
- (2019) Naveed Ahmed Journal of Manufacturing Processes
- State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
- (2019) Adrita Dass et al. Coatings
- Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives
- (2019) Balasubramanian Nagarajan et al. Engineering
- One-step electrodeposition of copper on conductive 3D printed objects
- (2019) Myung Jun Kim et al. Additive Manufacturing
- Preserving Fine Structure Details and Dramatically Enhancing Electron Transfer Rates in Graphene 3D-Printed Electrodes via Thermal Annealing: Toward Nitroaromatic Explosives Sensing
- (2019) Filip Novotný et al. ACS Applied Materials & Interfaces
- Binder jetting: A review of process, materials, and methods
- (2019) Mohsen Ziaee et al. Additive Manufacturing
- 3D Printing of Interdigitated Dielectric Elastomer Actuators
- (2019) Alex Chortos et al. ADVANCED FUNCTIONAL MATERIALS
- Engineering inkjet bioprinting processes toward translational therapies
- (2019) Ioannis Angelopoulos et al. BIOTECHNOLOGY AND BIOENGINEERING
- Dense 8 mol% yttria-stabilized zirconia electrolyte by DLP stereolithography
- (2019) Bohang Xing et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Ni−Fe (Oxy)hydroxide Modified Graphene Additive Manufactured (3D‐Printed) Electrochemical Platforms as an Efficient Electrocatalyst for the Oxygen Evolution Reaction
- (2019) Pãmyla L. Santos et al. ChemElectroChem
- 3D Printing of Bio-Based Polycarbonate and Its Potential Applications in Ecofriendly Indoor Manufacturing
- (2019) Seong Je Park et al. Additive Manufacturing
- Copper electroplating of 3D printed composite electrodes
- (2019) Eva Vaněčková et al. JOURNAL OF ELECTROANALYTICAL CHEMISTRY
- 3D printed polylactic acid/carbon black electrodes with nearly ideal electrochemical behaviour
- (2019) Eva Vaněčková et al. JOURNAL OF ELECTROANALYTICAL CHEMISTRY
- Effects of Filament Extrusion, 3D Printing and Hot-Pressing on Electrical and Tensile Properties of Poly(Lactic) Acid Composites Filled with Carbon Nanotubes and Graphene
- (2019) Giovanni Spinelli et al. Nanomaterials
- Multiscale ceramic components from preceramic polymers by hybridization of vat polymerization-based technologies
- (2019) Johanna Schmidt et al. Additive Manufacturing
- 3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis
- (2018) C. Lorena Manzanares Palenzuela et al. ANALYTICAL CHEMISTRY
- Fully printed and integrated electrolyzer cells with additive manufacturing for high-efficiency water splitting
- (2018) Gaoqiang Yang et al. APPLIED ENERGY
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- The effect of additive manufacturing on global energy demand: An assessment using a bottom-up approach
- (2018) Leendert A. Verhoef et al. ENERGY POLICY
- Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling
- (2018) Shenglong Jiang et al. HIGH PERFORMANCE POLYMERS
- FDM process parameters influence over the mechanical properties of polymer specimens: A review
- (2018) Diana Popescu et al. POLYMER TESTING
- A review of powder additive manufacturing processes for metallic biomaterials
- (2018) W.S.W. Harun et al. POWDER TECHNOLOGY
- Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
- (2018) Chuan Yi Foo et al. Scientific Reports
- The effects of printing orientation on the electrochemical behaviour of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes
- (2018) Hairul Hisham Bin Hamzah et al. Scientific Reports
- 3D printing of high performance cyanate ester thermoset polymers
- (2018) Swetha Chandrasekaran et al. Journal of Materials Chemistry A
- 3D printed porous carbon anode for enhanced power generation in microbial fuel cell
- (2018) Bin Bian et al. Nano Energy
- Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
- (2018) Peng Qin et al. ACS Biomaterials-Science & Engineering
- Improved corrosion behavior of ultrafine-grained eutectic Al-12Si alloy produced by selective laser melting
- (2018) Yan Yang et al. MATERIALS & DESIGN
- 3D Printed Electrodes for Improved Gas Reactant Transport for Electrochemical Reactions
- (2018) Tânia Machado Benedetti et al. 3D Printing and Additive Manufacturing
- Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
- (2018) Peng Qin et al. ACS Biomaterials Science & Engineering
- Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries
- (2018) Meng Cheng et al. ADVANCED MATERIALS
- Mechanical performance of PEEK produced by additive manufacturing
- (2018) T.J. Hoskins et al. POLYMER TESTING
- Femtosecond Laser Produced Hydrophobic Hierarchical Structures on Additive Manufacturing Parts
- (2018) Lishi Jiao et al. Nanomaterials
- 3D Printed Graphene Electrodes’ Electrochemical Activation
- (2018) Michelle P. Browne et al. ACS Applied Materials & Interfaces
- 3D Printed Terahertz Rectangular Waveguides of Polystyrene and TOPAS: a Comparison
- (2018) R. Guo et al. Journal of Infrared Millimeter and Terahertz Waves
- All-printed solid-state substrate-versatile and high-performance micro-supercapacitors for in situ fabricated transferable and wearable energy storage via multi-material 3D printing
- (2018) Yan Zhang et al. JOURNAL OF POWER SOURCES
- 3D printing of ceramics: A review
- (2018) Zhangwei Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Evaluation of commercially available polylactic acid (PLA) filaments for 3D printing applications
- (2018) Bruna Driussi Mistro Matos et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Direct laser metal deposition of Inconel 738
- (2018) A. Ramakrishnan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Multimaterial 3D-Printed Water Electrolyzer with Earth-Abundant Electrodeposited Catalysts
- (2018) Adriano Ambrosi et al. ACS Sustainable Chemistry & Engineering
- Hierarchical 3D electrodes for electrochemical energy storage
- (2018) Hongtao Sun et al. Nature Reviews Materials
- Macroporous epoxy-carbon fiber structures with a sacrificial 3D printed polymeric mesh suppresses electromagnetic radiation
- (2018) Saswat Mishra et al. CHEMICAL ENGINEERING JOURNAL
- Additive manufactured bipolar plate for high-efficiency hydrogen production in proton exchange membrane electrolyzer cells
- (2017) Gaoqiang Yang et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Additive Manufacturing of Metallic Materials: A Review
- (2017) Yi Zhang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Biodegradable poly(lactic acid)-based scaffolds: synthesis and biomedical applications
- (2017) Mustafa Abu Ghalia et al. JOURNAL OF POLYMER RESEARCH
- Three-dimensional printed yttria-stabilized zirconia self-supported electrolytes for solid oxide fuel cell applications
- (2017) S. Masciandaro et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Effect of post weld heat treatment on the 6061 aluminum alloy produced by ultrasonic additive manufacturing
- (2017) M.N. Gussev et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The role of microstructure on the mechanical properties of polyurethane foams containing thermoregulating microcapsules
- (2017) Angel Serrano et al. POLYMER TESTING
- 3D-Printed Conical Arrays of TiO2 Electrodes for Enhanced Photoelectrochemical Water Splitting
- (2017) Chong-Yong Lee et al. Advanced Energy Materials
- Three-dimensional printed cellular stainless steel as a high-activity catalytic electrode for oxygen evolution
- (2017) Xiaolei Huang et al. Journal of Materials Chemistry A
- Additive Manufacturing: Unlocking the Evolution of Energy Materials
- (2017) Adilet Zhakeyev et al. Advanced Science
- Resistivity and Its Anisotropy Characterization of 3D-Printed Acrylonitrile Butadiene Styrene Copolymer (ABS)/Carbon Black (CB) Composites
- (2017) Jie Zhang et al. Applied Sciences-Basel
- Current Status and Challenges in Printed Batteries: Toward Form Factor-Free, Monolithic Integrated Power Sources
- (2017) Keun-Ho Choi et al. ACS Energy Letters
- 3D Printed Graphene Based Energy Storage Devices
- (2017) Christopher W. Foster et al. Scientific Reports
- Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
- (2016) Daeho Hong et al. Acta Biomaterialia
- A Flexible Quasi-Solid-State Nickel-Zinc Battery with High Energy and Power Densities Based on 3D Electrode Design
- (2016) Jinping Liu et al. ADVANCED MATERIALS
- 3D-printing technologies for electrochemical applications
- (2016) Adriano Ambrosi et al. CHEMICAL SOCIETY REVIEWS
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- All-Polystyrene 3D-Printed Electrochemical Device with Embedded Carbon Nanofiber-Graphite-Polystyrene Composite Conductor
- (2016) Zuhayr Rymansaib et al. ELECTROANALYSIS
- The survey of key technologies in hydrogen energy storage
- (2016) Fan Zhang et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Process improvements and characterization of ultrasonic additive manufactured structures
- (2016) P.J. Wolcott et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Plating on acrylonitrile–butadiene–styrene (ABS) plastic: a review
- (2016) Sharon Olivera et al. JOURNAL OF MATERIALS SCIENCE
- Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications
- (2016) Jayasheelan Vaithilingam et al. Materials Science & Engineering C-Materials for Biological Applications
- Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
- (2016) Amanda J. Sterling et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of additive manufactured, powder-bed laser-fused materials
- (2016) Todd M. Mower et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High performance polymer nanocomposites for additive manufacturing applications
- (2016) Al C. de Leon et al. REACTIVE & FUNCTIONAL POLYMERS
- Three dimensional printing of high dielectric capacitor using projection based stereolithography method
- (2016) Yang Yang et al. Nano Energy
- Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
- (2016) Khairul Amilin Ibrahim et al. MATERIALS & DESIGN
- Preserving rapid prototypes: a review
- (2016) Carolien Coon et al. Heritage Science
- Helical 3D-Printed Metal Electrodes as Custom-Shaped 3D Platform for Electrochemical Devices
- (2015) Adriano Ambrosi et al. ADVANCED FUNCTIONAL MATERIALS
- Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering
- (2015) Arghavan Farzadi et al. CERAMICS INTERNATIONAL
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
- (2015) Fuda Ning et al. COMPOSITES PART B-ENGINEERING
- Microstructural and mechanical characterization of Ti6Al4V refurbished parts obtained by laser metal deposition
- (2015) Ramesh Raju et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An exploration of binder jetting of copper
- (2015) Yun Bai et al. RAPID PROTOTYPING JOURNAL
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Optimization of fused deposition modeling process parameters: a review of current research and future prospects
- (2015) Omar A. Mohamed et al. Advances in Manufacturing
- FDM 3D Printing Technology in Manufacturing Composite Elements
- (2014) P. Dudek ARCHIVES OF METALLURGY AND MATERIALS
- Three dimensional (3D) printed electrodes for interdigitated supercapacitors
- (2014) Chen Zhao et al. ELECTROCHEMISTRY COMMUNICATIONS
- Bio-inspired flow field designs for polymer electrolyte membrane fuel cells
- (2014) Nannan Guo et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
- (2014) Yong Huang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Electrochemical properties of vanadium oxide coatings grown by hydrothermal synthesis on FTO substrates
- (2013) D. Vernardou et al. NEW JOURNAL OF CHEMISTRY
- Electrochemical properties of vanadium oxide coatings grown by APCVD on glass substrates
- (2013) D. Louloudakis et al. SURFACE & COATINGS TECHNOLOGY
- Performance of sinking EDM electrodes made by selective laser sintering technique
- (2012) Fred L. Amorim et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- 3D lithium ion batteries—from fundamentals to fabrication
- (2011) Matthew Roberts et al. JOURNAL OF MATERIALS CHEMISTRY
- Three-dimensional electrodes and battery architectures
- (2011) Timothy S. Arthur et al. MRS BULLETIN
- A review on global solar energy policy
- (2011) K.H. Solangi et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Fabrication of modified graphite bipolar plates by indirect selective laser sintering (SLS) for direct methanol fuel cells
- (2010) Kaushik Alayavalli et al. RAPID PROTOTYPING JOURNAL
- Parametric appraisal of mechanical property of fused deposition modelling processed parts
- (2009) Anoop Kumar Sood et al. MATERIALS & DESIGN
- Stability of ABS compounds subjected to repeated cycles of extrusion processing
- (2009) E.-K. Karahaliou et al. POLYMER ENGINEERING AND SCIENCE
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now