Enhanced heat resistance and compression strength of microcellular poly (lactic acid) foam by promoted stereocomplex crystallization with added D-Mannitol

Cellulose nanofiber reinforced poly (lactic acid) with enhanced rheology, crystallization and foaming ability

(2022) Qian Ren et al.   CARBOHYDRATE POLYMERS

Fabrication of super-hydrophilic and highly open-porous poly (lactic acid) scaffolds using supercritical carbon dioxide foaming

(2022) Qian Ren et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Achieving low‐thermal conductivity and high β phase in PVDF / PMMA blend foams via low‐pressure microcellular foaming

(2022) Zhengsheng Weng et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Enhanced Nonisothermal Crystallization and Heat Resistance of Poly(l-lactic acid) by d-Sorbitol as a Homogeneous Nucleating Agent

(2021) Xin Zhang et al.   ACS Macro Letters

Importance of Low‐Temperature Melt‐Mixing on the Construction of Stereocomplex Crystallites with Superior Nucleation Efficiency in Asymmetric Poly( l ‐lactide)/Poly( d ‐lactide) Blends

(2021) Ju Yao et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

A green fabrication method of poly (lactic acid) perforated membrane via tuned crystallization and gas diffusion process

(2021) Qian Ren et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Highly Reinforced Poly(lactic acid) Foam Fabricated by Formation of a Heat-Resistant Oriented Stereocomplex Crystalline Structure

(2021) Ruiguang Li et al.   ACS Sustainable Chemistry & Engineering

Lightweight and strong gelling agent-reinforced injection-molded polypropylene composite foams fabricated using low-pressure CO2 as the foaming agent

(2021) Qian Ren et al.   Journal of CO2 Utilization

Microcellular PLA/PMMA foam fabricated by CO2 foaming with outstanding shape-memory performance

(2021) Jialong Chai et al.   Journal of CO2 Utilization

Ultrahigh performance polylactide achieved by the design of molecular structure

(2021) Peng Li et al.   MATERIALS & DESIGN

Achieving morphological evolution and interfacial enhancement in fully degradable and supertough polylactide/polyurethane elastomer blends by interfacial stereocomplexation

(2021) Wenjuan Zhou et al.   APPLIED SURFACE SCIENCE

Nanocellular TPU composite foams achieved by stretch-assisted microcellular foaming with low-pressure gaseous CO2 as blowing agent

(2021) Jinchuan Zhao et al.   Journal of CO2 Utilization

Recent advancements in manufacturing technologies of microcellular polymers: a review

(2020) Rupesh Dugad et al.   JOURNAL OF POLYMER RESEARCH

Green and High-Expansion PLLA/PDLA Foams with Excellent Thermal Insulation and Enhanced Compressive Properties

(2020) Zhihui Yan et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

A novel aryl hydrazide nucleator to effectively promote stereocomplex crystallization in high-molecular-weight poly(L-lactide)/poly(D-lactide) blends

(2020) Huili Liu et al.   POLYMER

Multiphase TixOy nanoparticles by pulsed laser ablation of titanium in supercritical CO2

(2019) Amandeep Singh et al.   APPLIED SURFACE SCIENCE

An efficient, food contact accelerator for stereocomplexation of high-molecular-weight poly( -lactide)/ poly( -lactide) blend under nonisothermal crystallization

(2019) Yuan Chen et al.   POLYMER

Green Method to Widen the Foaming Processing Window of PLA by Introducing Stereocomplex Crystallites

(2019) Zhihui Yan et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Strong and thermally insulating polylactic acid/glass fiber composite foam fabricated by supercritical carbon dioxide foaming

(2019) Jiachang Wang et al.   INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

Stereocomplex-type polylactide with remarkably enhanced melt-processability and electrical performance via incorporating multifunctional carbon black

(2019) Zhenwei Liu et al.   POLYMER

The effect of surface modification of glass fiber on the performance of poly(lactic acid) composites: Graphene oxide vs. silane coupling agents

(2018) Mengfan Jing et al.   APPLIED SURFACE SCIENCE

Fabrication and mechanism of poly(butylene succinate) urethane ionomer microcellular foams with high thermal insulation and compressive feature

(2018) Yue Xu et al.   EUROPEAN POLYMER JOURNAL

Better scCO2 Foaming of Polypropylene via Earlier Crystallization with the Addition of Composite Nucleating Agent

(2018) Chenguang Yang et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Ultra-high expansion linear polypropylene foams prepared in a semi-molten state under supercritical CO2

(2018) Junji Hou et al.   JOURNAL OF SUPERCRITICAL FLUIDS

Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies

(2017) M. Nofar et al.   EUROPEAN POLYMER JOURNAL

Plasticized poly(3-hydroxybutyrate) with improved melt processing and balanced properties

(2017) Denis Mihaela Panaitescu et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Enhancing Stereocomplexation Ability of Polylactide by Coalescing from Its Inclusion Complex with Urea

(2017) Ping Liu et al.   Polymers

Fundamental Influences of Induced Crystallization and Phase Separation on the Foaming Behavior of Poly(lactic acid)/Polyethylene Glycol Blends Blown with Compressed CO2

(2016) Qian Ren et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Stereocomplexation of high-molecular-weight enantiomeric poly(lactic acid)s enhanced by miscible polymer blending with hydrogen bond interactions

(2016) Pengju Pan et al.   POLYMER

Preferential formation of stereocomplex in high-molecular-weight polylactic acid racemic blend induced by carbon nanotubes

(2016) Su Yang et al.   POLYMER

Enantiomeric blends of high-molecular-weight poly(lactic acid)/poly(ethylene glycol) triblock copolymers: Enhanced stereocomplexation and thermomechanical properties

(2016) Lili Han et al.   POLYMER

Perspective on Polylactic Acid (PLA) based Sustainable Materials for Durable Applications: Focus on Toughness and Heat Resistance

(2016) Vidhya Nagarajan et al.   ACS Sustainable Chemistry & Engineering

Morphological structure, thermal and mechanical properties of tough poly(lactic acid) upon stereocomplexes

(2015) Fei Qi et al.   EUROPEAN POLYMER JOURNAL

Stereocomplex crystallization of high-molecular-weight poly(l-lactic acid)/poly(d-lactic acid) racemic blends promoted by a selective nucleator

(2015) Lili Han et al.   POLYMER

Mannitol metabolism during pathogenic fungal–host interactions under stressed conditions

(2015) Mukesh Meena et al.   Frontiers in Microbiology

Stereocomplex Crystallite Network in Asymmetric PLLA/PDLA Blends: Formation, Structure, and Confining Effect on the Crystallization Rate of Homocrystallites

(2014) Xin-Feng Wei et al.   MACROMOLECULES

Solid State Foaming of Poly(lactic acid) Blown with Compressed CO2: Influences of Long Chain Branching and Induced Crystallization on Foam Expansion and Cell Morphology

(2013) Qian Ren et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Hydrothermal in situ preparation of TiO2 particles onto poly(lactic acid) electrospun nanofibres

(2012) Kamal K. Gupta et al.   APPLIED SURFACE SCIENCE

Evidence of a dual network/spherulitic crystalline morphology in PLA stereocomplexes

(2012) Sajjad Saeidlou et al.   POLYMER

Ultrasonic Irradiation Enhanced Cell Nucleation in Microcellular Poly(lactic Acid): A Novel Approach to Reduce Cell Size Distribution and Increase Foam Expansion

(2011) Jing Wang et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Batch foaming of chain extended PLA with supercritical CO2: Influence of the rheological properties and the process parameters on the cellular structure

(2011) Yves-Marie Corre et al.   JOURNAL OF SUPERCRITICAL FLUIDS

Shear-Induced Nucleation and Growth of Long Helices in Supercooled Isotactic Polypropylene

(2009) Yong Geng et al.   MACROMOLECULES

Rheology and extrusion foaming of chain-branched poly(lactic acid)

(2009) Mihaela Mihai et al.   POLYMER ENGINEERING AND SCIENCE

Crystalline Structure and Morphology of Poly(l-lactide) Formed under High-Pressure CO2

(2008) Hironori Marubayashi et al.   MACROMOLECULES