Role of porosity defects in metal 3D printing: Formation mechanisms, impacts on properties and mitigation strategies
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Role of porosity defects in metal 3D printing: Formation mechanisms, impacts on properties and mitigation strategies
Authors
Keywords
-
Journal
Materials Today
Volume -, Issue -, Pages -
Publisher
Elsevier BV
Online
2022-09-10
DOI
10.1016/j.mattod.2022.08.014
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Mechanism of keyhole pore formation in metal additive manufacturing
- (2022) Lu Wang et al. npj Computational Materials
- Inconel 718-W7Ni3Fe bimetallic structures using directed energy deposition-based additive manufacturing
- (2022) C. Groden et al. Virtual and Physical Prototyping
- Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing
- (2022) Yuze Huang et al. Nature Communications
- Manipulating molten pool dynamics during metal 3D printing by ultrasound
- (2022) Zhichao Yang et al. Applied Physics Reviews
- Additive manufacturing of bimetallic structures
- (2022) Amit Bandyopadhyay et al. Virtual and Physical Prototyping
- Multi-scale defects in powder-based additively manufactured metals and alloys
- (2022) J. Fu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Defect-Based Fatigue Life Prediction of L-PBF Additive Manufactured Metals
- (2021) Niloofar Sanaei et al. ENGINEERING FRACTURE MECHANICS
- Influence of Compositionally Graded Interface on Microstructure and Compressive Deformation of 316L Stainless Steel to Al12Si Aluminum Alloy Bimetallic Structures
- (2021) Yanning Zhang et al. ACS Applied Materials & Interfaces
- Multi-physics modeling of direct energy deposition process of thin-walled structures: defect analysis
- (2021) Shuhao Wang et al. COMPUTATIONAL MECHANICS
- A physics-informed machine learning model for porosity analysis in laser powder bed fusion additive manufacturing
- (2021) Rui Liu et al. The International Journal of Advanced Manufacturing Technology
- Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges
- (2021) Uwe Zerbst et al. PROGRESS IN MATERIALS SCIENCE
- The effect of defect population on anisotropic fatigue resistance of selective laser melted AlSi10Mg alloy
- (2021) Z.K. Wu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Defect-correlated fatigue resistance of additively manufactured Al-Mg4.5Mn alloy with in situ micro-rolling
- (2021) Cheng Xie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Universal scaling laws of keyhole stability and porosity in 3D printing of metals
- (2021) Zhengtao Gan et al. Nature Communications
- In situ X-ray imaging of pore formation mechanisms and dynamics in laser powder-blown directed energy deposition additive manufacturing
- (2021) Sarah J. Wolff et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Selective laser melting additive manufacturing of tungsten with niobium alloying: Microstructure and suppression mechanism of microcracks
- (2021) Juanqin Xue et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Uncovering the coupled impact of defect morphology and microstructure on the tensile behavior of Ti-6Al-4V fabricated via laser powder bed fusion
- (2021) Timothy Montalbano et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 2D nanomaterials in 3D/4D-printed biomedical devices
- (2021) Manojit Das et al. JOURNAL OF MATERIALS RESEARCH
- Topologically engineered 3D printed architectures with superior mechanical strength
- (2021) Rushikesh S. Ambekar et al. Materials Today
- Smoke Suppression in Electron Beam Melting of Inconel 718 Alloy Powder Based on Insulator–Metal Transition of Surface Oxide Film by Mechanical Stimulation
- (2021) Akihiko Chiba et al. Materials
- Thermoelectric Magnetohydrodynamic Model for Laser-Based Metal Additive Manufacturing
- (2021) Lu Wang et al. Physical Review Applied
- Nondiffractive beam shaping for enhanced optothermal control in metal additive manufacturing
- (2021) Thejaswi U. Tumkur et al. Science Advances
- Evaluation of a modified void descriptor function to uniquely characterize pore networks and predict fracture-related properties in additively manufactured metals
- (2021) Dillon S. Watring et al. ACTA MATERIALIA
- Tomoscopy: Time‐Resolved Tomography for Dynamic Processes in Materials
- (2021) Francisco García‐Moreno et al. ADVANCED MATERIALS
- How defects depend on geometry and scanning strategy in additively manufactured AlSi10Mg
- (2021) Lukas Englert et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In situ design of advanced titanium alloy with concentration modulations by additive manufacturing
- (2021) Tianlong Zhang et al. SCIENCE
- Multi-track alternated overlapping model suitable for variable laser cladding process parameters
- (2021) Peihua Xu et al. SURFACE & COATINGS TECHNOLOGY
- 3D Printed Materials in Water Treatment Applications
- (2021) Pranjal Ghosal et al. Advanced Sustainable Systems
- Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
- (2020) Ievgenii Liashenko et al. Nature Communications
- Grain structure control during metal 3D printing by high-intensity ultrasound
- (2020) C. J. Todaro et al. Nature Communications
- Effect of defects and specimen size with rectangular cross-section on the tensile properties of additively manufactured components
- (2020) Pan Wang et al. Virtual and Physical Prototyping
- High cycle fatigue in selective laser melted Ti-6Al-4V
- (2020) Punit Kumar et al. ACTA MATERIALIA
- Investigation of the sensitivity of the fatigue resistance to defect position in aluminium alloys obtained by Selective laser melting using artificial defects
- (2020) Matthieu Bonneric et al. INTERNATIONAL JOURNAL OF FATIGUE
- Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications
- (2020) A. Fatemi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of selective laser melting scanning speed parameter on the surface morphology, surface roughness, and micropores for manufactured Ti6Al4V parts
- (2020) Mohd Faizal Sadali et al. JOURNAL OF MATERIALS RESEARCH
- Analysis of the effect of internal defects on fatigue performance of additive manufactured metals
- (2020) Niloofar Sanaei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
- (2020) Saad A. Khairallah et al. SCIENCE
- High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: Effect of sub-surface porosity and surface roughness
- (2020) Simone Romano et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Controlling the porosity using exponential decay heat input regimes during electron beam wire-feed additive manufacturing of Al-Mg alloy
- (2020) V. R. Utyaganova et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V alloy
- (2020) Y.N. Hu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding
- (2020) S. Mohammad H. Hojjatzadeh et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- In Situ Analysis of Laser Powder Bed Fusion Using Simultaneous High-Speed Infrared and X-ray Imaging
- (2020) Benjamin Gould et al. JOM
- Mechanistic models for additive manufacturing of metallic components
- (2020) H.L. Wei et al. PROGRESS IN MATERIALS SCIENCE
- A modified volumetric energy density–based approach for porosity assessment in additive manufacturing process design
- (2020) Paolo Ferro et al. The International Journal of Advanced Manufacturing Technology
- Influence of the position and size of various deterministic defects on the high cycle fatigue resistance of a 316L steel manufactured by laser powder bed fusion
- (2020) Olivier Andreau et al. INTERNATIONAL JOURNAL OF FATIGUE
- Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
- (2020) Niloofar Sanaei et al. PROGRESS IN MATERIALS SCIENCE
- Metallurgy, mechanistic models and machine learning in metal printing
- (2020) T. DebRoy et al. Nature Reviews Materials
- Combined interface shape and material stiffness optimization for uniform distribution of contact stress
- (2020) Yicong Zhou et al. MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES
- Critical instability at moving keyhole tip generates porosity in laser melting
- (2020) Cang Zhao et al. SCIENCE
- Effect of N2 content in shielding gas on formation quality and microstructure of high nitrogen austenitic stainless steel fabricated by wire and arc additive manufacturing
- (2020) Dongqing Yang et al. Journal of Manufacturing Processes
- Mechanical behavior prediction of additively manufactured components based on defect evolution observation by synchrotron radiation X-ray tomography
- (2020) Dianyin Hu et al. MATERIALS & DESIGN
- On the role of laser in situ re-melting into pore elimination of Ti–6Al–4V components fabricated by selective laser melting
- (2020) Fei Lv et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A review of cadmium sorption mechanisms on soil mineral surfaces revealed from synchrotron-based X-ray absorption fine structure spectroscopy: Implications for soil remediation
- (2020) Xinxin MO et al. PEDOSPHERE
- Additive manufacturing of advanced ceramic materials
- (2020) Y. Lakhdar et al. PROGRESS IN MATERIALS SCIENCE
- A modified El-Haddad model for versatile defect tolerant design
- (2020) Luke Sheridan INTERNATIONAL JOURNAL OF FATIGUE
- Defects as a root cause of fatigue failure of metallic components. II: Non-metallic inclusions
- (2019) U. Zerbst et al. ENGINEERING FAILURE ANALYSIS
- Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
- (2019) Ross Cunningham et al. SCIENCE
- Defects as a root cause of fatigue failure of metallic components. I: Basic aspects
- (2019) U. Zerbst et al. ENGINEERING FAILURE ANALYSIS
- Defects as a root cause of fatigue failure of metallic components. III: Cavities, dents, corrosion pits, scratches
- (2019) U. Zerbst et al. ENGINEERING FAILURE ANALYSIS
- Criticality of porosity defects on the fatigue performance of wire + arc additive manufactured titanium alloy
- (2019) Romali Biswal et al. INTERNATIONAL JOURNAL OF FATIGUE
- A competition between the contour and hatching zones on the high cycle fatigue behaviour of a 316L stainless steel: Analyzed using X-ray computed tomography
- (2019) Olivier Andreau et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Interpretation of the fatigue anisotropy of additively manufactured TA6V alloys via a fracture mechanics approach
- (2019) Viet-Duc Le et al. ENGINEERING FRACTURE MECHANICS
- 3D characterization of defects in deep-powder-bed manufactured Ti–6Al–4V and their influence on tensile properties
- (2019) J. Elambasseril et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718
- (2019) Changhao Pei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Scientific, technological and economic issues in metal printing and their solutions
- (2019) T. DebRoy et al. NATURE MATERIALS
- State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
- (2019) Adrita Dass et al. Coatings
- Additive manufacturing of thermoelectric materials via fused filament fabrication
- (2019) Cagri Oztan et al. Applied Materials Today
- Prediction of fatigue limit in additively manufactured Ti-6Al-4V alloy at elevated temperature
- (2019) Toshifumi Kakiuchi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF
- (2019) Mohamad Bayat et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Methods for Rapid Pore Classification in Metal Additive Manufacturing
- (2019) Robert Snell et al. JOM
- Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316L stainless steel processed via selective laser melting
- (2019) Taban Larimian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Relationship between manufacturing defects and fatigue properties of additive manufactured austenitic stainless steel
- (2019) Thale R. Smith et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel
- (2019) Jin Myoung Jeon et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Characteristics and Processing of Hydrogen-Treated Copper Powders for EB-PBF Additive Manufacturing
- (2019) Christopher Ledford et al. Applied Sciences-Basel
- Defect formation and prevention in directed energy deposition of high-manganese steels and the effect on mechanical properties
- (2019) Fabian Kies et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strategies for improving the sustainability of structural metals
- (2019) Dierk Raabe et al. NATURE
- Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
- (2019) Anton du Plessis et al. MATERIALS & DESIGN
- Hot-wire arc additive manufacturing Ti–6.5Al–2Zr–1Mo–1V titanium alloy: Pore characterization, microstructural evolution, and mechanical properties
- (2019) Tao Lu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Pore space characteristics and corresponding effect on tensile properties of Inconel 625 fabricated via laser powder bed fusion
- (2019) Mehrnaz Salarian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Loss of elemental Mg during wire + arc additive manufacturing of Al-Mg alloy and its effect on mechanical properties
- (2019) Tao Yuan et al. Journal of Manufacturing Processes
- The influence of oxygen on the chemical composition and mechanical properties of Ti-6Al-4V during laser powder bed fusion (L-PBF)
- (2019) Kai Dietrich et al. Additive Manufacturing
- Single track and single layer formation in selective laser melting of niobium solid solution alloy
- (2018) Yueling GUO et al. Chinese Journal of Aeronautics
- Heat and fluid flow in additive manufacturing—Part I: Modeling of powder bed fusion
- (2018) T. Mukherjee et al. COMPUTATIONAL MATERIALS SCIENCE
- Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys
- (2018) T. Mukherjee et al. COMPUTATIONAL MATERIALS SCIENCE
- Data-driven multi-scale multi-physics models to derive process–structure–property relationships for additive manufacturing
- (2018) Wentao Yan et al. COMPUTATIONAL MECHANICS
- Feedstock powder processing research needs for additive manufacturing development
- (2018) Iver E. Anderson et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
- (2018) S. Romano et al. ENGINEERING FRACTURE MECHANICS
- Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity
- (2018) M. Benedetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- Representing crack growth in additively manufactured Ti-6Al-4V
- (2018) R. Jones et al. INTERNATIONAL JOURNAL OF FATIGUE
- Porosity prediction: Supervised-learning of thermal history for direct laser deposition
- (2018) Mojtaba Khanzadeh et al. JOURNAL OF MANUFACTURING SYSTEMS
- Scaling laws for the additive manufacturing
- (2018) Alexander M. Rubenchik et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In situ reactive multi-material Ti6Al4V-calcium phosphate-nitride coatings for bio-tribological applications
- (2018) Himanshu Sahasrabudhe et al. Journal of the Mechanical Behavior of Biomedical Materials
- Additive manufacturing of multi-material structures
- (2018) Amit Bandyopadhyay et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Effect of building direction on porosity and fatigue life of selective laser melted AlSi12Mg alloy
- (2018) Junwen Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing: scientific and technological challenges, market uptake and opportunities
- (2018) Syed A.M. Tofail et al. Materials Today
- Effect of electric-magnetic compound field on the pore distribution in laser cladding process
- (2018) Nan Zhang et al. OPTICS AND LASER TECHNOLOGY
- A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization
- (2018) G. Chen et al. POWDER TECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. Nature Communications
- The role of defects and critical pore size analysis in the fatigue response of additively manufactured IN718 via crystal plasticity
- (2018) Veerappan Prithivirajan et al. MATERIALS & DESIGN
- Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
- (2018) Hiroshige Masuo et al. INTERNATIONAL JOURNAL OF FATIGUE
- Build Rate Optimization for Powder Bed Fusion
- (2018) Ming Tang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718
- (2018) Arun Ramanathan Balachandramurthi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy
- (2018) N.O. Larrosa et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
- (2018) Bintao Wu et al. Journal of Manufacturing Processes
- Defects-dictated tensile properties of selective laser melted Ti-6Al-4V
- (2018) Thomas Voisin et al. MATERIALS & DESIGN
- Characterization of the Effects of Internal Pores on Tensile Properties of Additively Manufactured Austenitic Stainless Steel 316L
- (2018) A. E. Wilson-Heid et al. EXPERIMENTAL MECHANICS
- An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing
- (2018) G. Meneghetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- Double-slit photoelectron interference in strong-field ionization of the neon dimer
- (2018) Maksim Kunitski et al. Nature Communications
- Effect of Hatch Spacing on Melt Pool and As-built Quality During Selective Laser Melting of Stainless Steel: Modeling and Experimental Approaches
- (2018) Zhichao Dong et al. Materials
- Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
- (2018) T. Mukherjee et al. Journal of Manufacturing Processes
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- Fatigue properties of AlSi10Mg produced by Additive Layer Manufacturing
- (2018) Julius N. Domfang Ngnekou et al. INTERNATIONAL JOURNAL OF FATIGUE
- The effect of powder oxidation on defect formation in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. ACTA MATERIALIA
- Eddy current detection of subsurface defects for additive/subtractive hybrid manufacturing
- (2017) Wei Du et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review
- (2017) Ehsan Malekipour et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fatigue properties of a titanium alloy (Ti–6Al–4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress
- (2017) Nikolas Hrabe et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
- (2017) Daniel Greitemeier et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
- (2017) J. Günther et al. INTERNATIONAL JOURNAL OF FATIGUE
- Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
- (2017) Ming Tang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of fatigue resistant materials: Challenges and opportunities
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes
- (2017) S. Beretta et al. INTERNATIONAL JOURNAL OF FATIGUE
- A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping of stainless steel
- (2017) Weilong Cong et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Review of the Methods for Production of Spherical Ti and Ti Alloy Powder
- (2017) Pei Sun et al. JOM
- Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
- (2017) Ross Cunningham et al. JOM
- Porosity elimination and heat treatment of diode laser-clad homogeneous coating on cast aluminum-copper alloy
- (2017) Zhixiang Yang et al. SURFACE & COATINGS TECHNOLOGY
- The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
- (2017) S. Tammas-Williams et al. Scientific Reports
- Qualification of AM parts: Extreme value statistics applied to tomographic measurements
- (2017) S. Romano et al. MATERIALS & DESIGN
- Location, location & size: defects close to surfaces dominate fatigue crack initiation
- (2017) Itziar Serrano-Munoz et al. Scientific Reports
- Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
- (2017) Michiru Nishita et al. Scientific Reports
- Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
- (2016) Y.J. Liu et al. ACTA MATERIALIA
- Selective laser melting of Invar 36: Microstructure and properties
- (2016) Chunlei Qiu et al. ACTA MATERIALIA
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
- (2016) Saad A. Khairallah et al. ACTA MATERIALIA
- The hydrodynamics of bubble rise and impact with solid surfaces
- (2016) Rogerio Manica et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support
- (2016) Jacob Smith et al. COMPUTATIONAL MECHANICS
- Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research
- (2016) P. Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography
- (2016) Ross Cunningham et al. JOM
- Damage evolution and failure mechanisms in additively manufactured stainless steel
- (2016) Holly D. Carlton et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
- (2016) M. Qian et al. MRS BULLETIN
- Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components
- (2016) S. Tammas-Williams et al. SCRIPTA MATERIALIA
- Reducing lack of fusion during selective laser melting of CoCrMo alloy: Effect of laser power on geometrical features of tracks
- (2016) K. Darvish et al. MATERIALS & DESIGN
- Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
- (2016) Galina Kasperovich et al. MATERIALS & DESIGN
- Evaluation of defect density, microstructure, residual stress, elastic modulus, hardness and strength of laser-deposited AISI 4340 steel
- (2015) Guifang Sun et al. ACTA MATERIALIA
- 3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT
- (2015) Xin Zhou et al. ACTA MATERIALIA
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- A new computational intelligence approach in formulation of functional relationship of open porosity of the additive manufacturing process
- (2015) A. Garg et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fabrication of large Ti–6Al–4V structures by direct laser deposition
- (2015) Chunlei Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
- (2015) Christian Weingarten et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mitigation of pores generation at overlapping zone during laser cladding
- (2015) Chunyang Zhou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
- (2015) Galina Kasperovich et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Balling phenomena in selective laser melted tungsten
- (2015) Xin Zhou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting
- (2015) S. Tammas-Williams et al. MATERIALS CHARACTERIZATION
- Interfacial characterization of SLM parts in multi-material processing: Intermetallic phase formation between AlSi10Mg and C18400 copper alloy
- (2015) S.L. Sing et al. MATERIALS CHARACTERIZATION
- Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
- (2015) Stefan Leuders et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V
- (2015) A. W. Prabhu et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting
- (2015) Haijun Gong et al. MATERIALS & DESIGN
- A review of ultrasonic peening treatment
- (2015) Massoud Malaki et al. MATERIALS & DESIGN
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
- (2014) Wayne E. King et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mesoscopic simulation model of selective laser melting of stainless steel powder
- (2014) Saad A. Khairallah et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Defect generation and propagation mechanism during additive manufacturing by selective beam melting
- (2014) A. Bauereiß et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fatigue performance evaluation of selective laser melted Ti–6Al–4V
- (2014) P. Edwards et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental and numerical investigation of temperature distribution and melt pool geometry during pulsed laser welding of Ti6Al4V alloy
- (2014) Mohammad Akbari et al. OPTICS AND LASER TECHNOLOGY
- Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
- (2014) John A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Modified NASGRO equation for physically short cracks
- (2013) J. Maierhofer et al. INTERNATIONAL JOURNAL OF FATIGUE
- Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
- (2013) P. Edwards et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel
- (2013) Marcel Bachmann et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Bone tissue engineering using 3D printing
- (2013) Susmita Bose et al. Materials Today
- Synchrotron-based X-ray microscopic studies for bioeffects of nanomaterials
- (2013) Ying Zhu et al. Nanomedicine-Nanotechnology Biology and Medicine
- Material defects as the basis of fatigue design
- (2012) Yukitaka Murakami INTERNATIONAL JOURNAL OF FATIGUE
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Effects of Pore Position in Depth on Stress/Strain Concentration and Fatigue Crack Initiation
- (2011) Zhiqiang Xu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering
- (2010) Bin Duan et al. Acta Biomaterialia
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Selective laser melting of aluminium components
- (2010) Eleftherios Louvis et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Quantification of the interaction within defect populations on fatigue behavior in an aluminum alloy
- (2009) P. Li et al. ACTA MATERIALIA
- Modelling of fatigue thresholds for small cracks in a mild steel by “Strip-Yield” model
- (2009) S. Beretta et al. ENGINEERING FRACTURE MECHANICS
- On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental–numerical investigation
- (2009) Masoud Alimardani et al. OPTICS AND LASERS IN ENGINEERING
- Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing
- (2008) M. Turker et al. MATERIALS CHARACTERIZATION
- Porosity and the fatigue behavior of hypoeutectic and hypereutectic aluminum–silicon casting alloys
- (2007) H AMMAR et al. INTERNATIONAL JOURNAL OF FATIGUE
- Surface roughness variation of thin wall milling, related to modal interactions
- (2007) Sébastien Seguy et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- High density selective laser melting of Waspaloy®
- (2007) Kamran Aamir Mumtaz et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started