- Home
- Publications
- Publication Search
- Publication Details
Title
3D Printed Materials in Water Treatment Applications
Authors
Keywords
-
Journal
Advanced Sustainable Systems
Volume -, Issue -, Pages 2100282
Publisher
Wiley
Online
2021-12-30
DOI
10.1002/adsu.202100282
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Mechanical and Acoustic Behavior of 3D Printed Hierarchical Mathematical Fractal Menger Sponge
- (2021) Brijesh Kushwaha et al. ADVANCED ENGINEERING MATERIALS
- Atomic Scale Structure Inspired 3D‐Printed Porous Structures with Tunable Mechanical Response
- (2021) Rushikesh S. Ambekar et al. ADVANCED ENGINEERING MATERIALS
- Manufacturing and Application of 3D Printed Photo Fenton Reactors for Wastewater Treatment
- (2021) Kourosh Nasr Esfahani et al. International Journal of Environmental Research and Public Health
- Quantifying instant water cleaning efficiency using zinc oxide decorated complex 3D printed porous architectures
- (2021) Partha Kumbhakar et al. JOURNAL OF HAZARDOUS MATERIALS
- Topologically engineered 3D printed architectures with superior mechanical strength
- (2021) Rushikesh S. Ambekar et al. Materials Today
- The Journey of Water Remediation through Biomimetic Strategies: A Mechanistic Insight
- (2021) Ria Sen Gupta et al. Advanced Sustainable Systems
- The emerging role of 3D printing in water desalination
- (2021) Abdullah Khalil et al. SCIENCE OF THE TOTAL ENVIRONMENT
- Fouling mitigation in reverse osmosis processes with 3D printed sinusoidal spacers
- (2021) Jing Wee Koo et al. WATER RESEARCH
- Solvent based Slurry Stereolithography 3D printed hydrophilic ceramic membrane for ultrafiltration application
- (2020) Saikat Sinha Ray et al. CERAMICS INTERNATIONAL
- Photo-induced degradation of bio-toxic Ciprofloxacin using the porous 3D hybrid architecture of an atomically thin sulfur-doped g-C3N4/ZnO nanosheet
- (2020) Bramha Gupta et al. ENVIRONMENTAL RESEARCH
- Co-production of knowledge and adaptation to water scarcity in developing countries
- (2020) Zahra Zarei et al. JOURNAL OF ENVIRONMENTAL MANAGEMENT
- Three-dimensional, printed water-filtration system for economical, on-site arsenic removal
- (2020) Kihoon Kim et al. PLoS One
- A Flexible Method for Nanofiber-based 3D Microfluidic Device Fabrication for Water Quality Monitoring
- (2020) Xiaojun Chen et al. Micromachines
- 3D-Printed Repeating Re-Entrant Topography to Achieve On-Demand Wettability and Separation
- (2020) Bingchen Wang et al. ACS Applied Materials & Interfaces
- 3D printing for drug delivery and biomedical applications
- (2020) Sarwar Beg et al. DRUG DISCOVERY TODAY
- 3D-printed surface-patterned ceramic membrane with enhanced performance in crossflow filtration
- (2020) Zhiyang Lyu et al. JOURNAL OF MEMBRANE SCIENCE
- Functional Supported ZnO/Bi2MoO6 Heterojunction Photocatalysts with 3D-Printed Fractal Polymer Substrates and Produced by Innovative Plasma-Based Immobilization Methods
- (2020) Yoann de Rancourt de Mimérand et al. ACS Applied Materials & Interfaces
- Macroscale Control of Reactivity using 3D Printed Materials with Intrinsic Catalytic Properties
- (2020) J. Sebastián Manzano et al. APPLIED CATALYSIS A-GENERAL
- 3D printed honeycomb-shaped feed channel spacer for membrane fouling mitigation in nanofiltration
- (2020) Sanghun Park et al. JOURNAL OF MEMBRANE SCIENCE
- Improving the performance of vacuum membrane distillation using a 3D-printed helical baffle and a superhydrophobic nanocomposite membrane
- (2020) Qiyuan Li et al. SEPARATION AND PURIFICATION TECHNOLOGY
- On the mechanical properties of atomic and 3D printed zeolite-templated carbon nanotube networks
- (2020) Rushikesh S. Ambekar et al. Additive Manufacturing
- 3D-printed highly porous and reusable chitosan monoliths for Cu(II) removal
- (2019) Dongxing Zhang et al. JOURNAL OF MATERIALS SCIENCE
- A biopolymer‐based 3D printable hydrogel for toxic metal adsorption from water
- (2019) Gayan A Appuhamillage et al. POLYMER INTERNATIONAL
- 3D-Printed Anti-Fouling Cellulose Mesh for Highly Efficient Oil/Water Separation Applications
- (2019) J. Justin Koh et al. ACS Applied Materials & Interfaces
- 3D printed floating photocatalysts for wastewater treatment
- (2019) María J. Martín de Vidales et al. CATALYSIS TODAY
- N-doped porous carbon material prepared via direct ink writing for the removal of methylene blue
- (2019) Zhenxing Liu et al. DIAMOND AND RELATED MATERIALS
- Photoactive Hybrid Materials with Fractal Designs Produced via 3D Printing and Plasma Grafting Technologies
- (2019) Yoann de Rancourt de Mimérand et al. ACS Applied Materials & Interfaces
- 3D Printed Fouling-Resistant Composite Membranes
- (2019) Saeed Mazinani et al. ACS Applied Materials & Interfaces
- 3D printed spacers for organic fouling mitigation in membrane distillation
- (2019) Erik Hugo Cabrera Castillo et al. JOURNAL OF MEMBRANE SCIENCE
- 3D printed spacers based on TPMS architectures for scaling control in membrane distillation
- (2019) Navya Thomas et al. JOURNAL OF MEMBRANE SCIENCE
- Preparation of hybrid chitosan membranes by selective laser sintering for adsorption and catalysis
- (2019) Pengbo Sun et al. MATERIALS & DESIGN
- 3D printing of mixed matrix films based on metal-organic frameworks and thermoplastic polyamide 12 by selective laser sintering for water applications
- (2019) Rui Li et al. ACS Applied Materials & Interfaces
- Pharmaceutically active compounds in aqueous environment: A status, toxicity and insights of remediation
- (2019) Abhradeep Majumder et al. ENVIRONMENTAL RESEARCH
- Three-Dimensionally Printed Bioinspired Superhydrophobic Packings for Oil-in-Water Emulsion Separation
- (2019) Ruizhe Xing et al. LANGMUIR
- 3D printed microstructured Au/TiO2 catalyst for hydrogen photoproduction
- (2019) Ander Elkoro et al. Applied Materials Today
- Metal–organic framework mixed-matrix coatings on 3D printed devices
- (2019) Andreu Figuerola et al. Applied Materials Today
- Magnetically navigable 3D printed multifunctional microdevices for environmental applications
- (2019) Roberto Bernasconi et al. Additive Manufacturing
- 3D-printed ceramic structures with in situ grown whiskers for effective oil/water separation
- (2019) Zhe Chen et al. CHEMICAL ENGINEERING JOURNAL
- 3D printed robust superhydrophilic and underwater superoleophobic composite membrane for high efficient oil/water separation
- (2019) Xipeng Li et al. SEPARATION AND PURIFICATION TECHNOLOGY
- Energy efficient 3D printed column type feed spacer for membrane filtration
- (2019) Syed Muztuza Ali et al. WATER RESEARCH
- 3D printed chitosan scaffolds: A new TiO2 support for the photocatalytic degradation of amoxicillin in water
- (2019) Laura Bergamonti et al. WATER RESEARCH
- 3D printing for membrane separation, desalination and water treatment
- (2019) Leonard D. Tijing et al. Applied Materials Today
- 3D printed chemically and mechanically robust membrane by selective laser sintering for separation of oil/water and immiscible organic mixtures
- (2019) Shushan Yuan et al. CHEMICAL ENGINEERING JOURNAL
- Patterned Carbon Nitride-Based Hybrid Aerogel Membranes via 3D Printing for Broadband Solar Wastewater Remediation
- (2018) Peisheng He et al. ADVANCED FUNCTIONAL MATERIALS
- Fully printed and integrated electrolyzer cells with additive manufacturing for high-efficiency water splitting
- (2018) Gaoqiang Yang et al. APPLIED ENERGY
- 3D printed polyvinyl alcohol ferrate(VI) capsules: Effective means for the removal of pharmaceuticals and illicit drugs from wastewater
- (2018) Marianna Czölderová et al. CHEMICAL ENGINEERING JOURNAL
- Investigation of the performance behavior of a forward osmosis membrane system using various feed spacer materials fabricated by 3D printing technique
- (2018) Numan Yanar et al. CHEMOSPHERE
- 3D printed feed spacers based on triply periodic minimal surfaces for flux enhancement and biofouling mitigation in RO and UF
- (2018) Nurshaun Sreedhar et al. DESALINATION
- 3D printed triply periodic minimal surfaces as spacers for enhanced heat and mass transfer in membrane distillation
- (2018) Navya Thomas et al. DESALINATION
- Biocatalytic membranes prepared by inkjet printing functionalized yeast cells onto microfiltration substrates
- (2018) Yingying Chen et al. JOURNAL OF MEMBRANE SCIENCE
- Mg(OH)2 Films Prepared by Ink-Jet Printing and Their Photocatalytic Activity in CO2 Reduction and H2O Conversion
- (2018) E. Luévano-Hipólito et al. TOPICS IN CATALYSIS
- Fouling resilient perforated feed spacers for membrane filtration
- (2018) Sarah Kerdi et al. WATER RESEARCH
- Direct 3D Printing of Reactive Agitating Impellers for the Convenient Treatment of Various Pollutants in Water
- (2018) Xueyan Sun et al. Advanced Materials Interfaces
- Intelligent Optimization of Na−Mn−W/SiO2 Catalysts for the Oxidative Coupling of Methane
- (2018) Zhinian Li et al. ChemNanoMat
- 3D printed polyamide membranes for desalination
- (2018) Maqsud R. Chowdhury et al. SCIENCE
- Thermo-mechanical and swelling properties of three-dimensional-printed poly (ethylene glycol) diacrylate/silica nanocomposites
- (2018) John Ryan C. Dizon et al. MRS Communications
- 3D printing of ceramics: A review
- (2018) Zhangwei Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- 3D printing for chemical, pharmaceutical and biological applications
- (2018) Andrew J. Capel et al. Nature Reviews Chemistry
- 3D printed composite membranes with enhanced anti-fouling behaviour
- (2018) Abouther Al-Shimmery et al. JOURNAL OF MEMBRANE SCIENCE
- 3D printing design of turbulence promoters in a cross-flow microfiltration system for fine particles removal
- (2018) Hung-Yuan Tsai et al. JOURNAL OF MEMBRANE SCIENCE
- Bio-inspired hollow PDMS sponge for enhanced oil–water separation
- (2018) Jung Hwal Shin et al. JOURNAL OF HAZARDOUS MATERIALS
- Enhancing fouling mitigation of submerged flat-sheet membranes by vibrating 3D-spacers
- (2018) Yong Zen Tan et al. SEPARATION AND PURIFICATION TECHNOLOGY
- Super-hydrophobic 3D printed polysulfone membranes with a switchable wettability by self-assembled candle soot for efficient gravity-driven oil/water separation
- (2017) Shushan Yuan et al. Journal of Materials Chemistry A
- 3D printing of a mechanically durable superhydrophobic porous membrane for oil–water separation
- (2017) Juan Lv et al. Journal of Materials Chemistry A
- Graphene oxide-based evaporator with one-dimensional water transport enabling high-efficiency solar desalination
- (2017) Yiju Li et al. Nano Energy
- 3D Printing of Micropatterned Anion Exchange Membranes
- (2016) Jiho Seo et al. ACS Applied Materials & Interfaces
- Efficient CO 2 methanation over Ni/Al 2 O 3 coated structured catalysts
- (2016) Simge Danaci et al. CATALYSIS TODAY
- Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments
- (2016) Parham Azimi et al. ENVIRONMENTAL SCIENCE & TECHNOLOGY
- Ink-jet printing assisted fabrication of thin film composite membranes
- (2016) Shai Badalov et al. JOURNAL OF MEMBRANE SCIENCE
- Development and characterization of 3D-printed feed spacers for spiral wound membrane systems
- (2016) Amber Siddiqui et al. WATER RESEARCH
- 3D Printing as Feasible Platform for On-Site Building Oil-Skimmer for Oil Collection from Spills
- (2016) Changyou Yan et al. Advanced Materials Interfaces
- Materials for next-generation desalination and water purification membranes
- (2016) Jay R. Werber et al. Nature Reviews Materials
- Removal of oil from water using magnetic bicomponent composite nanofibers fabricated by electrospinning
- (2015) Zhe Jiang et al. COMPOSITES PART B-ENGINEERING
- A Novel Bio-carrier Fabricated Using 3D Printing Technique for Wastewater Treatment
- (2015) Yang Dong et al. Scientific Reports
- 3D printed flow plates for the electrolysis of water: an economic and adaptable approach to device manufacture
- (2014) Greig Chisholm et al. Energy & Environmental Science
- A critical review of extracellular polymeric substances (EPSs) in membrane bioreactors: Characteristics, roles in membrane fouling and control strategies
- (2014) Hongjun Lin et al. JOURNAL OF MEMBRANE SCIENCE
- Helically microstructured spacers improve mass transfer and fractionation selectivity in ultrafiltration
- (2014) Clemens Fritzmann et al. JOURNAL OF MEMBRANE SCIENCE
- Inkjet printing of porous nanoparticle-based catalyst layers in microchannel reactors
- (2013) Seungcheol Lee et al. APPLIED CATALYSIS A-GENERAL
- The benefit of design of support architectures for zeolite coated structured catalysts for methanol-to-olefin conversion
- (2013) Jasper Lefevere et al. CATALYSIS TODAY
- High Photocatalytic Activity of Transparent Films Composed of ZnO Nanosheets
- (2013) Jan Hynek et al. LANGMUIR
- Potential Foulants and Fouling Indicators in MBRs: A Critical Review
- (2013) Zhiwei Wang et al. SEPARATION SCIENCE AND TECHNOLOGY
- A mini-review on membrane fouling
- (2012) Wenshan Guo et al. BIORESOURCE TECHNOLOGY
- Deposition of photocatalytically active TiO2films by inkjet printing of TiO2nanoparticle suspensions obtained from microwave-assisted hydrothermal synthesis
- (2012) Melis Arin et al. NANOTECHNOLOGY
- Inkjet printing ceramics: From drops to solid
- (2011) B. Derby JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Thin TiO2 films prepared by inkjet printing of the reverse micelles sol–gel composition
- (2011) M. Morozova et al. SENSORS AND ACTUATORS B-CHEMICAL
- Physical and chemical properties of titanium dioxide printed layers
- (2010) Marcela Černá et al. CATALYSIS TODAY
- Heterogeneous photocatalyst materials for water splitting
- (2008) Akihiko Kudo et al. CHEMICAL SOCIETY REVIEWS
- Combinatorial synthesis and high-throughput photopotential and photocurrent screening of mixed-metal oxides for photoelectrochemical water splitting
- (2008) Jordan E. Katz et al. Energy & Environmental Science
- Effects of several different flux enhancing chemicals on filterability and fouling reduction of membrane bioreactor (MBR) mixed liquors
- (2008) H. Koseoglu et al. JOURNAL OF MEMBRANE SCIENCE
- Two-photon stereolithography for realizing ultraprecise three-dimensional nano/microdevices
- (2008) S.-H. Park et al. Laser & Photonics Reviews
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search