Nanoscale precipitates with quasicrystal domains enhanced strength-ductility synergy in a Mg–6Zn–4Al–1Sn–0.5Mn alloy

Achieving Yield Symmetry in an Extruded Mg-Zn-Y Alloy by More Effective Dispersion of Quasicrystalline i-Phase

(2021) Karel Tesař et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins

(2021) Changjian Yan et al.   Nature Communications

Shear band-driven precipitate dispersion for ultrastrong ductile medium-entropy alloys

(2021) Tae Jin Jang et al.   Nature Communications

Precipitation of stable icosahedral quasicrystal phase in a Mg-Zn-Al alloy

(2021) Alok Singh et al.   ACTA MATERIALIA

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy

(2021) Yihao Bao et al.   MATERIALS CHARACTERIZATION

Enhanced ductility and strength of Mg-1Zn-1Sn-0.3Y-0.2Ca alloy achieved by novel micro-texture design

(2021) Cheng Wang et al.   SCRIPTA MATERIALIA

Aperiodic structures of rod-shaped precipitates in a Mg-Zn-Al alloy

(2021) Yunhe Zheng et al.   SCRIPTA MATERIALIA

Synergization of ductility and yield strength in a dilute quaternary Mg-Zn-Gd-Ca alloy through texture modification and Guinier–Preston zone

(2021) H. Yan et al.   SCRIPTA MATERIALIA

Tailoring the mechanical properties of Mg–Zn magnesium alloy by calcium addition and hot extrusion process

(2020) Z. Zareian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High strength and ductility Mg-8Gd-3Y-0.5Zr alloy with bimodal structure and nano-precipitates

(2020) Xiaoxiao Wei et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Developing an industrial-scale ECAP Mg-Al-Zn alloy with multi-heterostructure for synchronously high strength and good ductility

(2020) Jiapeng Sun et al.   MATERIALS CHARACTERIZATION

Magnesium matrix composite reinforced by nanoparticles – A review

(2020) K.B. Nie et al.   Journal of Magnesium and Alloys

Microstructure and Tensile Properties of the Mg-6Zn-4Al-xSn Die Cast Magnesium Alloy

(2019) Jin Zhou et al.   Metals

Precipitation strengthening in an ultralight magnesium alloy

(2019) Song Tang et al.   Nature Communications

Influence of hard plate hot forging temperature on the microstructure, texture and mechanical properties in a lean Mg–Zn–Al alloy

(2019) S. Sanyal et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of solutes on strength and ductility of Mg alloys

(2019) D.F. Shi et al.   ACTA MATERIALIA

Accelerated and enhanced aging hardening response of the pre-aged and HPT-processed Mg-Zn-Y alloy by HAADF-STEM

(2019) Yansheng Li et al.   MATERIALS LETTERS

Influence of quasicrystal I-phase on twinning of extruded Mg-Zn-Y alloys under compression

(2018) G. Garces et al.   ACTA MATERIALIA

Precipitation of binary quasicrystals along dislocations

(2018) Zhiqing Yang et al.   Nature Communications

Nano-scale precipitation and phase growth in Mg-Gd binary alloy: An atomic-scale investigation using HAADF-STEM

(2018) Jingxu Kent Zheng et al.   MATERIALS & DESIGN

Development of Mg–Zn–Y–Ca alloys containing icosahedral quasicrystal phase through trace addition of Y

(2018) Kaibo Nie et al.   JOURNAL OF MATERIALS RESEARCH

Nanoscale coherent interface strengthening of Mg alloys

(2018) Qiuming Peng et al.   Nanoscale

Ultra-fine grain size and exceptionally high strength in dilute Mg–Ca alloys achieved by conventional one-step extrusion

(2018) Hucheng Pan et al.   MATERIALS LETTERS

Improving mechanical properties of age-hardenable Mg–6Zn–4Al–1Sn alloy processed by double-aging treatment

(2017) Shaozhen Zhu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Dual-phase nanostructuring as a route to high-strength magnesium alloys

(2017) Ge Wu et al.   NATURE

Effects of Sn addition on microstructure and mechanical properties of Mg-Zn-Al alloys

(2017) Bo Wang et al.   Progress in Natural Science-Materials International

Nucleation of recrystallized magnesium grains over quasicrystalline phase during severe plastic deformation of a Mg-Zn-Y alloy at room temperature

(2017) Alok Singh et al.   SCRIPTA MATERIALIA

Effects of Sn addition on microstructure and mechanical properties of Mg-Zn-Al alloys

(2017) Bo Wang et al.   Progress in Natural Science-Materials International

Microstructure and mechanical properties of as-extruded and as-aged Mg–Zn–Al–Sn alloys

(2016) Bo Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strength and ductility with {10͞11} — {10͞12} double twinning in a magnesium alloy

(2016) M. Lentz et al.   Nature Communications

Effect of grain size on slip activity in pure magnesium polycrystals

(2015) C.M. Cepeda-Jiménez et al.   ACTA MATERIALIA

In situ transmission electron microscopy investigation of quasicrystal-crystal transformations in Mg–Zn–Y alloys

(2015) J.F. Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Brittle intermetallic compound makes ultrastrong low-density steel with large ductility

(2015) Sang-Heon Kim et al.   NATURE

Ready for the road

(2015) Gerald S. Frankel   NATURE MATERIALS

Direct observation of solid-state reversed transformation from crystals to quasicrystals in a Mg alloy

(2015) Jian-Fang Liu et al.   Scientific Reports

A high strength and ductility Mg–Zn–Al–Cu–Mn magnesium alloy

(2013) Jing Wang et al.   MATERIALS & DESIGN

The effect of Ag and Ca additions on the age hardening response of Mg–Zn alloys

(2013) T. Bhattacharjee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility

(2013) G. Liu et al.   NATURE MATERIALS

Direct observation of dislocation dissociation and Suzuki segregation in a Mg–Zn–Y alloy by aberration-corrected scanning transmission electron microscopy

(2012) Zhiqing Yang et al.   ACTA MATERIALIA

Role of icosahedral phase in enhancing the strength of Mg–Sn–Zn–Al alloy

(2012) Y.K. Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Precipitation and Hardening in Magnesium Alloys

(2012) Jian-Feng Nie   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Casting Defects and Mechanical Properties of High Pressure Die Cast Mg-Zn-Al-RE Alloys

(2011) Wenlong Xiao et al.   ADVANCED ENGINEERING MATERIALS

Enhancing strength and ductility of Mg–12Gd–3Y–0.5Zr alloy by forming a bi-ultrafine microstructure

(2011) H.J. Yang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect

(2011) A. Sanaty-Zadeh   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Particle strengthening in fcc crystals with prolate and oblate precipitates

(2011) Bernhard Sonderegger et al.   SCRIPTA MATERIALIA

Strengthening and toughening mechanisms in Mg–Zn–Y alloy with a long period stacking ordered structure

(2010) X.H. Shao et al.   ACTA MATERIALIA

Structural characterization of Laves-phase MgZn2 precipitated in Mg-Zn-Y alloy

(2010) Woo Jeong Kim et al.   METALS AND MATERIALS INTERNATIONAL

Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy

(2009) G. Sha et al.   ACTA MATERIALIA

The microstructures and mechanical properties of cast Mg–Zn–Al–RE alloys

(2009) Wenlong Xiao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of SPD-processed an as-cast AZ91D+Y magnesium alloy by equal channel angular extrusion and multi-axial forging

(2009) Zude Zhao et al.   MATERIALS & DESIGN

Rare-earth free wrought-processed magnesium alloy with dispersion of quasicrystal phase

(2009) Hidetoshi Somekawa et al.   SCRIPTA MATERIALIA

Achieving high strength and high ductility in magnesium alloys using severe plastic deformation combined with low-temperature aging

(2009) W.J. Kim et al.   SCRIPTA MATERIALIA

Effect of Zr, Mn and Sc additions on the grain size of Mg–Gd alloy

(2008) X.Y. Fang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of pre-aging and Al addition on age-hardening and microstructure in Mg-6wt% Zn alloys

(2008) K. Oh-ishi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain hardening behaviour and the Taylor factor of pure magnesium

(2008) C.H. Cáceres et al.   PHILOSOPHICAL MAGAZINE

Effects of Sn addition on microstructure and mechanical properties of Mg–Zn–Al alloys

(2007) Jihua Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS