An Experimental Study of ZrO2-CeO2 Hybrid Nanofluid and Response Surface Methodology for the Prediction of Heat Transfer Performance: The New Correlations

A comprehensive review on the effects of diesel/biofuel blends with nanofluid additives on compression ignition engine by response surface methodology

(2022) Medhat Elkelawy et al.   Energy Conversion and Management: X

Hybrid cooling of cylindrical battery with liquid channels in phase change material

(2021) Ravindra Jilte et al.   INTERNATIONAL JOURNAL OF ENERGY RESEARCH

Back propagation modeling of shear stress and viscosity of aqueous Ionic-MXene nanofluids

(2021) Asif Afzal et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Mechanical and Corrosion Studies of Friction Stir Welded Nano Al2O3 Reinforced Al-Mg Matrix Composites: RSM-ANN Modelling Approach

(2021) Chandrashekar A. et al.   Symmetry-Basel

Influence of Graphene Nano Particles and Antioxidants with Waste Cooking Oil Biodiesel and Diesel Blends on Engine Performance and Emissions

(2021) Sandeep Krishnakumar et al.   Energies

Effects of high-dosage copper oxide nanoparticles addition in diesel fuel on engine characteristics

(2021) Ümit Ağbulut et al.   ENERGY

Deep eutectic solvents-based CNT nanofluid – A potential alternative to conventional heat transfer fluids

(2021) Rashmi Walvekar et al.   Journal of the Taiwan Institute of Chemical Engineers

Experimental and theoretical investigation of heat transfer characteristics of cylindrical heat pipe using Al2O3–SiO2/W-EG hybrid nanofluids by RSM modeling approach

(2021) R. Vidhya et al.   Journal of Engineering and Applied Science

Human thermal comfort in passenger vehicles using an organic phase change material– an experimental investigation, neural network modelling, and optimization

(2020) Asif Afzal et al.   BUILDING AND ENVIRONMENT

Polymer nanoparticles based nano-fluid for enhanced oil recovery at harsh formation conditions

(2020) Yanxia Zhou et al.   FUEL

Experimental study for thermal conductivity of water‐based zirconium oxide nanofluid: Developing optimal artificial neural network and proposing new correlation

(2020) Andaç Batur Çolak   INTERNATIONAL JOURNAL OF ENERGY RESEARCH

Investigation on the effect of cottonseed oil blended with different percentages of octanol and suspended MWCNT nanoparticles on diesel engine characteristics

(2020) Manzoore Elahi M. Soudagar et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Investigation of Overlapped Twisted Tapes Inserted in a Double-Pipe Heat Exchanger Using Two-Phase Nanofluid

(2020) Mehdi Ghalambaz et al.   Nanomaterials

Response surface analysis, clustering, and random forest regression of pressure in suddenly expanded high-speed aerodynamic flows

(2020) Asif Afzal et al.   AEROSPACE SCIENCE AND TECHNOLOGY

Thermal and energy performance improvement of hybrid PV/T system by using olein palm oil with MXene as a new class of heat transfer fluid

(2020) L. Samylingam et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A novel battery thermal management system using nano-enhanced phase change materials

(2020) Ravindra Jilte et al.   ENERGY

Assessment of the thermal performance of a thermosyphon heat pipe using zirconia-acetone nanofluids

(2019) M.M. Sarafraz et al.   RENEWABLE ENERGY

The feasibility of genetic programming and ANFIS in prediction energetic performance of a building integrated photovoltaic thermal (BIPVT) system

(2019) Wei Gao et al.   SOLAR ENERGY

Numerical analysis and design optimization of engine room to improve cooling performance for a mid-class excavator

(2019) Jae Seok Lee et al.   Journal of Mechanical Science and Technology

A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids

(2019) Zafar Said et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Comparison of a theoretical and experimental thermal conductivity model on the heat transfer performance of Al2O3-SiO2/water hybrid-nanofluid

(2019) Çağatay Yıldız et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Rheological Behavior and Thermal Conductivity of Graphite–Ethylene Glycol Nanofluid

(2019) K. M. Yashawantha et al.   JOURNAL OF TESTING AND EVALUATION

Experimental study on the heat transfer performance and friction factor characteristics of Co3O4 and Al2O3 based H2O/(CH2OH)2 nanofluids in a vehicle engine radiator

(2019) Ashraf Mimi Elsaid   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Role of ultrasonication duration and surfactant on characteristics of ZnO and CuO nanofluids

(2019) Asif Afzal et al.   Materials Research Express

The effects of graphene oxide nanoparticle additive stably dispersed in dairy scum oil biodiesel-diesel fuel blend on CI engine: performance, emission and combustion characteristics

(2019) Manzoore Elahi. M. Soudagar et al.   FUEL

Research and review study of solar dish concentrators with different nanofluids and different shapes of cavity receiver: Experimental tests

(2019) Reyhaneh Loni et al.   RENEWABLE ENERGY

Effect of design and operating parameters on the thermal performance of aluminum flat grooved heat pipes

(2018) Hossein Alijani et al.   APPLIED THERMAL ENGINEERING

Experimental investigation of flat plate solar collector using CeO 2 -water nanofluid

(2018) M.A. Sharafeldin et al.   ENERGY CONVERSION AND MANAGEMENT

Prediction and optimization of thermophysical properties of stabilized Al 2 O 3 /antifreeze nanofluids using response surface methodology

(2018) Mohammad Hemmat Esfe et al.   JOURNAL OF MOLECULAR LIQUIDS

Experimental investigation and model development of the non-Newtonian behavior of CuO-MWCNT-10w40 hybrid nano-lubricant for lubrication purposes

(2018) Mohammad Hemmat Esfe et al.   JOURNAL OF MOLECULAR LIQUIDS

An overview on the effect of ultrasonication duration on different properties of nanofluids

(2018) Asif Afzal et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Experimental investigation of nanofluid stability on thermal performance and flow regimes in pulsating heat pipe

(2018) Ali Akbari et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Thermal efficiency enhancement of nanofluid-based parabolic trough collectors

(2018) Evangelos Bellos et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Comparison of prediction methods of PV/T nanofluid and nano-PCM system using a measured dataset and artificial neural network

(2018) Ali H.A. Al-Waeli et al.   SOLAR ENERGY

Properties of glycerol and ethylene glycol mixture based SiO 2 -CuO/C hybrid nanofluid for enhanced solar energy transport

(2018) Suleiman Akilu et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Green biosynthesis of superparamagnetic magnetite Fe 3 O 4 nanoparticles and biomedical applications in targeted anticancer drug delivery system: A review

(2018) Yen Pin Yew et al.   Arabian Journal of Chemistry

Investigation of a nanofluid-based compound parabolic trough solar collector under laminar flow conditions

(2018) Dimitrios Korres et al.   APPLIED THERMAL ENGINEERING

An experimental study on the thermal conductivity and dynamic viscosity of TiO 2 -SiO 2 nanofluids in water: Ethylene glycol mixture

(2017) M.F. Nabil et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Thermal performance of heat pipes using nanofluids

(2017) Leonard M. Poplaski et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Thermal conductivity and viscosity optimization of nanodiamond-Co 3 O 4 /EG (40:60) aqueous nanofluid using NSGA-II coupled with RSM

(2017) Mohammad Hemmat Esfe et al.   JOURNAL OF MOLECULAR LIQUIDS

An inspection of thermal conductivity of CuO-SWCNTs hybrid nanofluid versus temperature and concentration using experimental data, ANN modeling and new correlation

(2017) Seyed Hadi Rostamian et al.   JOURNAL OF MOLECULAR LIQUIDS

ANN modeling, cost performance and sensitivity analyzing of thermal conductivity of DWCNT–SiO2/EG hybrid nanofluid for higher heat transfer

(2017) Mohammad Hemmat Esfe et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Thermal characteristics studies on sintered wick heat pipe using CuO and Al2O3 nanofluids

(2016) M. Vijayakumar et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Estimation of thermal conductivity of CNTs-water in low temperature by artificial neural network and correlation

(2016) Mohammad Hemmat Esfe et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Critical heat flux and pool boiling heat transfer analysis of synthesized zirconia aqueous nano-fluids

(2016) M.M. Sarafraz et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Thermophysical properties of ethylene glycol based yttrium aluminum garnet (Y 3 Al 5 O 12 –EG) nanofluids

(2016) Gaweł Żyła   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Effects of graphene oxide nanofluids on heat pipe performance and capillary limits

(2016) Kyung Mo Kim et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Thermal performance of a miniature loop heat pipe using water–copper nanofluid

(2015) Zhenping Wan et al.   APPLIED THERMAL ENGINEERING

Improvement of heat transfer characteristics of cylindrical heat pipe by using SiC nanofluids

(2015) M. Ghanbarpour et al.   APPLIED THERMAL ENGINEERING

Heat transfer performance of two-phase closed thermosyphon with oxidized CNT/water nanofluids

(2015) Saeed Zeinali Heris et al.   HEAT AND MASS TRANSFER

Thermal conductivity of Cu/TiO2–water/EG hybrid nanofluid: Experimental data and modeling using artificial neural network and correlation

(2015) Mohammd Hemmat Esfe et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Performance analysis of cylindrical heat pipe using nanofluids – An experimental study

(2015) S. Venkatachalapathy et al.   INTERNATIONAL JOURNAL OF MULTIPHASE FLOW

Cerium oxide–ethylene glycol nanofluids with improved transport properties: Preparation and elucidation of mechanism

(2015) Elis Josna Mary E. et al.   Journal of the Taiwan Institute of Chemical Engineers

Statistical Analysis of Laminar Convective Heat Transfer of MWCNT-Deionized Water Nanofluid Using the Response Surface Methodology

(2015) Mehdi Shanbedi et al.   NUMERICAL HEAT TRANSFER PART A-APPLICATIONS

Statistical optimization of microchannel heat sink (MCHS) geometry cooled by different nanofluids using RSM analysis

(2015) M. Rahimi-Gorji et al.   European Physical Journal Plus

Numerical analysis of a screen mesh wick heat pipe with Cu/water nanofluid

(2014) A. Brusly Solomon et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental studies on the viscosity of TiO2 and Al2O3 nanoparticles suspended in a mixture of ethylene glycol and water for high temperature applications

(2013) Thaklaew Yiamsawas et al.   APPLIED ENERGY

Experimental Investigation of Al2O3/Water Nanofluid Through Equilateral Triangular Duct With Constant Wall Heat Flux in Laminar Flow

(2013) Saeed Zeinali Heris et al.   HEAT TRANSFER ENGINEERING

Experimental Study of Heat Transfer of a Car Radiator with CuO/Ethylene Glycol-Water as a Coolant

(2013) S. Zeinali Heris et al.   JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY

Thermal performance of heat pipe with suspended nano-particles

(2012) K. N. Shukla et al.   HEAT AND MASS TRANSFER

Experimental investigation of aluminum oxide nanofluid on heat pipe thermal performance

(2012) Mostafa Keshavarz Moraveji et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Application of nanofluid in an inclined mesh wicked heat pipes

(2012) Ping-Yang Wang et al.   THERMOCHIMICA ACTA

Designing a neural network for closed thermosyphon with nanofluid using a genetic algorithm

(2011) H. Salehi et al.   BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING

Heat transfer enhancement using Al2O3/water nanofluid in a two-phase closed thermosyphon

(2009) S.H. Noie et al.   INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW