A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
Published 2019 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
Authors
Keywords
Nanofluids, MQL, Lubricants, Machining processes, Cutting fluid
Journal
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume -, Issue -, Pages -
Publisher
Springer Science and Business Media LLC
Online
2019-09-16
DOI
10.1007/s00170-019-04382-x
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- A model for machining with nano-additives based minimum quantity lubrication
- (2019) H. Hegab et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Recent Advances in the Machining of Titanium Alloys using Minimum Quantity Lubrication (MQL) Based Techniques
- (2019) Salman Pervaiz et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms
- (2019) Gurraj Singh et al. Materials
- Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V
- (2019) Muhammad Jamil et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fuzzy modeling and optimization for experimental thermophysical properties of water and ethylene glycol mixture for Al2O3 and TiO2 based nanofluids
- (2019) Zafar Said et al. POWDER TECHNOLOGY
- Energy, exergy and economic analyses for the selection of working fluid and metal oxide nanofluids in a parabolic trough collector
- (2019) M.A. Ehyaei et al. SOLAR ENERGY
- Sustainability assessment associated with surface roughness and power consumption characteristics in nanofluid MQL-assisted turning of AISI 1045 steel
- (2019) Adel Taha Abbas et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tribological and machining characteristics of a minimum quantity lubrication (MQL) technology using GO/SiO2 hybrid nanoparticle water-based lubricants as cutting fluids
- (2018) Tao Lv et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of minimum quantity of lubrication (MQL) when turning hardened SAE 1045 steel: a comparison with dry machining
- (2018) Marco Aurélio Sampaio et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of nano-cutting fluids on tool performance and chip morphology during machining Inconel 718
- (2018) H. Hegab et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance evaluation of Ti–6Al–4V machining using nano-cutting fluids under minimum quantity lubrication
- (2018) H. Hegab et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of minimum quantity lubrication with addition of water in the grinding of alumina
- (2018) José C. Lopes et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- On machining of Ti-6Al-4V using multi-walled carbon nanotubes-based nano-fluid under minimum quantity lubrication
- (2018) H. Hegab et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Up to date review on the synthesis and thermophysical properties of hybrid nanofluids
- (2018) Munish Gupta et al. JOURNAL OF CLEANER PRODUCTION
- Towards sustainability assessment of machining processes
- (2018) H.A. Hegab et al. JOURNAL OF CLEANER PRODUCTION
- Acid-functionalized carbon nanofibers for high stability, thermoelectrical and electrochemical properties of nanofluids
- (2018) Zafar Said et al. JOURNAL OF COLLOID AND INTERFACE SCIENCE
- Application of the auxiliary wheel cleaning jet in the plunge cylindrical grinding with Minimum Quantity Lubrication technique under various flow rates
- (2018) Eduardo C Bianchi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Influence of alumina/MWCNT hybrid nanoparticle additives on tribological properties of lubricants in turning operations
- (2018) Anuj Kumar Sharma et al. Friction
- Multi-Objective Optimization for Grinding of AISI D2 Steel with Al2O3 Wheel under MQL
- (2018) Aqib Mashood Khan et al. Materials
- Design for Sustainable Manufacturing: Approach, Implementation, and Assessment
- (2018) Hossam Kishawy et al. Sustainability
- Coolant strategy influence on tool life and surface roughness when machining ADI
- (2017) A. Eltaggaz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental and numerical study of chip formation in orthogonal cutting of Ti-5553 alloy: the influence of cryogenic, MQL, and high pressure coolant supply
- (2017) Yusuf Kaynak et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of eco-friendly nanofluids during grinding of Inconel 718 through small quantity lubrication
- (2017) Manoj Kumar Sinha et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation on tribological performance of the wheel/workpiece interface in minimum quantity lubrication grinding with different concentrations of Al 2 O 3 nanofluids
- (2017) Yaogang Wang et al. JOURNAL OF CLEANER PRODUCTION
- Dry cutting effect in turning of a duplex stainless steel as a key factor in clean production
- (2017) G.M. Krolczyk et al. JOURNAL OF CLEANER PRODUCTION
- Evaluation of performance of nanofluid using multiwalled carbon nanotubes for machining of Ti–6AL–4V
- (2017) Neelesh Kumar Sahu et al. MACHINING SCIENCE AND TECHNOLOGY
- Experimental investigation of thermal properties of cutting fluid using soluble oil-based TiO2 nanofluid
- (2017) Hamid Salimi-Yasar et al. POWDER TECHNOLOGY
- Lubricating property of MQL grinding of Al 2 O 3 /SiC mixed nanofluid with different particle sizes and microtopography analysis by cross-correlation
- (2017) Xianpeng Zhang et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids
- (2017) Dongzhou Jia et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- A review on thermophysical properties of nanofluids and heat transfer applications
- (2017) Munish Gupta et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- A review on preparation methods, stability and applications of hybrid nanofluids
- (2017) Nor Azwadi Che Sidik et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Influence of soluble oil-based TiO 2 nanofluid on heat transfer performance of cutting fluid
- (2017) Hamid Salimi-Yasar et al. TRIBOLOGY INTERNATIONAL
- Performance of cutting nanofluids in tribological testing and conventional drilling
- (2017) Mohsen Mosleh et al. Journal of Manufacturing Processes
- Thermophysical and optical properties of SWCNTs nanofluids
- (2016) Z. Said INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- MQL machining: from mist generation to tribological behavior of different oils
- (2016) Frédéric Cabanettes et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- High-pressure coolant on flank and rake surfaces of tool in turning of Ti-6Al-4V: investigations on surface roughness and tool wear
- (2016) Mozammel Mia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An experimental investigation on effect of minimum quantity cooling lubrication (MQCL) in machining titanium alloy (Ti6Al4V)
- (2016) Salman Pervaiz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance of water-based TiO 2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6
- (2016) M.S. Najiha et al. JOURNAL OF CLEANER PRODUCTION
- Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques
- (2016) Munish Kumar Gupta et al. JOURNAL OF CLEANER PRODUCTION
- Performance evaluation of aluminium 6063 drilling under the influence of nanofluid minimum quantity lubrication
- (2016) Sukhpal Singh Chatha et al. JOURNAL OF CLEANER PRODUCTION
- Investigations into lubrication in grinding processes using MWCNTs nanofluids with ultrasonic-assisted dispersion
- (2016) Wei Tai Huang et al. JOURNAL OF CLEANER PRODUCTION
- Improvement of surface grinding process performance of CK45 soft steel by minimum quantity lubrication (MQL) technique using compressed cold air jet from vortex tube
- (2016) A. Saberi et al. JOURNAL OF CLEANER PRODUCTION
- Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review
- (2016) Anuj Kumar Sharma et al. JOURNAL OF CLEANER PRODUCTION
- Ultrasonic assisted grinding process with minimum quantity lubrication using oil-based nanofluids
- (2016) M.M. Molaie et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils
- (2016) Yaogang Wang et al. JOURNAL OF CLEANER PRODUCTION
- Assessment of cooling-lubrication and wettability characteristics of nano-engineered sunflower oil as cutting fluid and its impact on SQCL grinding performance
- (2016) K. ManojKumar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of nano sized garnet particles dispersion on the viscous behavior of extreme pressure lubricant oil
- (2016) R. Maheswaran et al. JOURNAL OF MOLECULAR LIQUIDS
- Effects of temperature and particles concentration on the dynamic viscosity of MgO-MWCNT/ethylene glycol hybrid nanofluid: Experimental study
- (2016) Omid Soltani et al. PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
- A review on the heat and mass transfer phenomena in nanofluid coolants with special focus on automotive applications
- (2016) Masoud Bozorg Bigdeli et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Application of nanofluids during minimum quantity lubrication: A case study in turning process
- (2016) Chetan et al. TRIBOLOGY INTERNATIONAL
- Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel
- (2016) R. Padmini et al. TRIBOLOGY INTERNATIONAL
- Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti–6Al–4V titanium alloy
- (2016) Alborz Shokrani et al. Journal of Manufacturing Processes
- Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding
- (2015) Dongkun Zhang et al. Chinese Journal of Aeronautics
- A note on the use of the minimum quantity lubrication (MQL) system in turning
- (2015) Diego Carou et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning
- (2015) Yu Su et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of internal cooling channel structures on cutting forces and tool life in side milling of H13 steel under cryogenic minimum quantity lubrication condition
- (2015) Chengliang Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding
- (2015) Yanbin Zhang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Performance evaluation of Ti–6Al–4V grinding using chip formation and coefficient of friction under the influence of nanofluids
- (2015) Dinesh Setti et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Investigation of effects of nanofluids on turning of AISI D2 steel using minimum quantity lubrication
- (2015) Puneet Sharma et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
- (2015) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Evaluating the Optical Properties of TiO2Nanofluid for a Direct Absorption Solar Collector
- (2015) Z. Said et al. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS
- Effect of machining parameters on the surface finish of a metal matrix composite under dry cutting conditions
- (2015) Brian Boswell et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- A review on hybrid nanofluids: Recent research, development and applications
- (2015) Jahar Sarkar et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- The tribological properties of nanofluid used in minimum quantity lubrication grinding
- (2014) Cong Mao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of ionic liquids as lubricants in micro milling – process capability and sustainability
- (2014) Minh-Quan Pham et al. JOURNAL OF CLEANER PRODUCTION
- Hard turning using HiPIMS-coated carbide tools: Wear behavior under dry and minimum quantity lubrication (MQL)
- (2014) Satish Chinchanikar et al. MEASUREMENT
- Use of vegetable oil in water emulsion achieved through ultrasonic atomization as cutting fluids in micro-milling
- (2014) Geoff Burton et al. Journal of Manufacturing Processes
- Enhancement of surface finish using water-miscible nano-cutting fluid in ultra-precision turning
- (2013) C.Y. Chan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Minimum quantity lubrication-MQL turning of AISI 4140 steel alloy
- (2013) Mohammadjafar Hadad et al. JOURNAL OF CLEANER PRODUCTION
- Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining
- (2013) Bizhan Rahmati et al. JOURNAL OF CLEANER PRODUCTION
- Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil
- (2013) Jagdeep Sharma et al. JOURNAL OF CLEANER PRODUCTION
- Minimum Quantity Lubricated Grinding of Inconel 751 Alloy
- (2013) A. S. S. Balan et al. MATERIALS AND MANUFACTURING PROCESSES
- The effect of functionalisation method on the stability and the thermal conductivity of nanofluid hybrids of carbon nanotubes/gamma alumina
- (2012) Saloumeh Mesgari Abbasi et al. CERAMICS INTERNATIONAL
- Numerical investigation of Newtonian and non-Newtonian multiphase flows using ISPH method
- (2012) A. Zainali et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Experimental thermal conductivity of ethylene glycol and water mixture based low volume concentration of Al2O3 and CuO nanofluids
- (2012) L. Syam Sundar et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Thermal analysis of minimum quantity lubrication-MQL grinding process
- (2012) Mohammadjafar Hadad et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
- (2012) A. Shokrani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- OPTIMAL MQL AND CUTTING CONDITIONS DETERMINATION FOR DESIRED SURFACE ROUGHNESS IN TURNING OF BRASS USING GENETIC ALGORITHMS
- (2012) V. N. Gaitonde et al. MACHINING SCIENCE AND TECHNOLOGY
- A review of nanofluid stability properties and characterization in stationary conditions
- (2011) A. Ghadimi et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication
- (2011) Jung Soo Nam et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Temperature and energy partition in minimum quantity lubrication-MQL grinding process
- (2011) M.J. Hadad et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Minimum quantity lubrication in grinding: effects of abrasive and coolant–lubricant types
- (2011) Taghi Tawakoli et al. JOURNAL OF CLEANER PRODUCTION
- A review on applications and challenges of nanofluids
- (2011) R. Saidur et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Cutting performance of different coatings during minimum quantity lubrication drilling of aluminum silicon B319 cast alloy
- (2011) G. Fox-Rabinovich et al. SURFACE & COATINGS TECHNOLOGY
- Fabrication, characterization, and measurement of some physicochemical properties of ZnO nanofluids
- (2010) Majid Moosavi et al. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
- Influence of oil mist parameters on minimum quantity lubrication – MQL grinding process
- (2010) T. Tawakoli et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel
- (2010) P. Vamsi Krishna et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machining evaluation of a hybrid MQL-CO2 grinding technology
- (2010) J.A. Sanchez et al. JOURNAL OF CLEANER PRODUCTION
- Effect of MQL on Surface Roughness in Milling of AA7075-T6
- (2010) Nihat Tosun et al. MATERIALS AND MANUFACTURING PROCESSES
- Enhancement of thermal conductivity of ethylene glycol based silver nanofluids
- (2010) Pankaj Sharma et al. POWDER TECHNOLOGY
- An investigation on surface grinding of AISI 4140 hardened steel using minimum quantity lubrication-MQL technique
- (2010) M. H. Sadeghi et al. International Journal of Material Forming
- A technology enabler for green machining: minimum quantity lubrication (MQL)
- (2010) Nourredine Boubekri et al. Journal of Manufacturing Technology Management
- An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication—MQL grinding
- (2009) T. Tawakoli et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid
- (2009) M.M.A. Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of TiO2Nanoparticles on Contact Line Stick−Slip Behavior of Volatile Drops
- (2009) J. Ross Moffat et al. JOURNAL OF PHYSICAL CHEMISTRY B
- Understanding the Role of Nanoparticles in Nano-oil Lubrication
- (2009) Kwangho Lee et al. TRIBOLOGY LETTERS
- Nanofluids and critical heat flux, experimental and analytical study
- (2008) M.N. Golubovic et al. APPLIED THERMAL ENGINEERING
- Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy
- (2008) M. H. Sadeghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro-liter lubrication machining of Inconel 718
- (2008) Toshiyuki Obikawa et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Minimum quantity lubrication drilling of aluminium–silicon alloys in water using diamond-like carbon coated drills
- (2008) Sukanta Bhowmick et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Applicability of cutting fluids with nanoparticle inclusion as coolants in machining
- (2008) R R Srikant et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Studies on minimum quantity lubrication (MQL) and air cooling at drilling
- (2007) B. Tasdelen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now