Understanding the impact of texture on the micromechanical anisotropy of laser powder bed fused Inconel 718

Studies of Post-Fabrication Heat Treatment of L-PBF-Inconel 718: Effects of Hold Time on Microstructure, Annealing Twins, and Hardness

(2021) Wakshum M. Tucho et al.   Metals

Strengthening mechanisms in selective laser-melted Inconel718 superalloy

(2021) Shuya Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evaluation of Inconel 718 Metallic Powder to Optimize the Reuse of Powder and to Improve the Performance and Sustainability of the Laser Powder Bed Fusion (LPBF) Process

(2021) Konrad Gruber et al.   Materials

Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy

(2021) Ozkan Gokcekaya et al.   ACTA MATERIALIA

A Novel Approach to Robustly Determine Residual Stress in Additively Manufactured Microstructures Using Synchrotron Radiation

(2021) Behzad Aminforoughi et al.   ADVANCED ENGINEERING MATERIALS

Additive manufacturing a powerful tool for the aerospace industry

(2021) Mahyar Khorasani et al.   RAPID PROTOTYPING JOURNAL

Process Induced Preheating in Laser Powder Bed Fusion Monitored by Thermography and Its Influence on the Microstructure of 316L Stainless Steel Parts

(2021) Gunther Mohr et al.   Metals

On the constitutive relationship between solidification cells and the fatigue behaviour of IN718 fabricated by laser powder bed fusion

(2021) Alessandro Piglione et al.   Additive Manufacturing

In situ microstructure analysis of Inconel 625 during laser powder bed fusion

(2021) Felix Schmeiser et al.   JOURNAL OF MATERIALS SCIENCE

Diffraction-Based Residual Stress Characterization in Laser Additive Manufacturing of Metals

(2021) Jakob Schröder et al.   Metals

On the detailed morphological and chemical evolution of phases during laser powder bed fusion and common post-processing heat treatments of IN718

(2021) Vitor Vieira Rielli et al.   Additive Manufacturing

Effect of post-processes on the microstructure and mechanical properties of laser powder bed fused IN718 superalloy

(2021) Jinghao Xu et al.   Additive Manufacturing

Determining volume fractions of γ, γ′, γ″, δ, and MC-carbide phases in Inconel 718 as a function of its processing history using an advanced neutron diffraction procedure

(2020) Nicholas C. Ferreri et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of defect characteristics on tensile deformation of an additively manufactured stainless steel: Evolutions of texture and intergranular strain

(2020) Hahn Choo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Determination of macroscopic stress from diffraction experiments: A critical discussion

(2020) Tatiana Mishurova et al.   JOURNAL OF APPLIED PHYSICS

The effect of energy density on texture and mechanical anisotropy in selective laser melted Inconel 718

(2020) S.Y. Liu et al.   MATERIALS & DESIGN

The Effect of γ″ and δ Phase Precipitation on the Mechanical Properties of Inconel 718 Manufactured by Selective Laser Melting: An In Situ Neutron Diffraction and Acoustic Emission Study

(2020) Jan Čapek et al.   JOM

On the interplay of microstructure and residual stress in LPBF IN718

(2020) Itziar Serrano-Munoz et al.   Journal of Materials Science

Concepts for nondestructive and depth-resolved X-ray residual stress analysis in the near-surface region of nearly single crystalline materials with mosaic structure

(2020) Andreas Hollmann et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

On the influence of heat treatment on microstructure and mechanical behavior of laser powder bed fused Inconel 718

(2020) Jakob Schröder et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Build Orientation Effects on Texture and Mechanical Properties of Selective Laser Melting Inconel 718

(2019) G. E. Bean et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Influence of build orientation on microstructure, mechanical and corrosion behavior of Inconel 718 processed by selective laser melting

(2019) Dafan Du et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Texture and Microstructural Features at Different Length Scales in Inconel 718 Produced by Selective Laser Melting

(2019) Michele Calandri et al.   Materials

Denoising of crystal orientation maps

(2019) R. Hielscher et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Diffraction-based determination of single-crystal elastic constants of polycrystalline titanium alloys

(2019) Alexander Heldmann et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Microscale residual stresses in additively manufactured stainless steel

(2019) Wen Chen et al.   Nature Communications

Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718

(2019) Thomas G. Gallmeyer et al.   Additive Manufacturing

Effect of scanning strategy on grain structure and crystallographic texture of Inconel 718 processed by selective laser melting

(2018) H.Y. Wan et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments

(2018) Dunyong Deng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting

(2018) Z.G. Zhu et al.   SCRIPTA MATERIALIA

Microstructure, precipitates and mechanical properties of powder bed fused Inconel 718 before and after heat treatment

(2018) Le Zhou et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Laser powder-bed fusion of Inconel 718 to manufacture turbine blades

(2017) Fabrizia Caiazzo et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Additive manufacturing of fatigue resistant materials: Challenges and opportunities

(2017) Aref Yadollahi et al.   INTERNATIONAL JOURNAL OF FATIGUE

Additive manufacturing in the context of structural integrity

(2017) Michael Gorelik   INTERNATIONAL JOURNAL OF FATIGUE

A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718

(2017) Saeede Ghorbanpour et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing

(2017) Mang Ni et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment

(2017) Wakshum M. Tucho et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Additively manufactured hierarchical stainless steels with high strength and ductility

(2017) Y. Morris Wang et al.   NATURE MATERIALS

Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 718

(2017) Naresh Nadammal et al.   MATERIALS & DESIGN

Electron Backscatter Diffraction Analysis of Inconel 718 Parts Fabricated by Selective Laser Melting Additive Manufacturing

(2016) Xiaoqing Wang et al.   JOM

Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction

(2016) Zhuqing Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural and texture development in direct laser fabricated IN718

(2014) Lakshmi L. Parimi et al.   MATERIALS CHARACTERIZATION

Microstructure and temperature dependence of intergranular strains on diffractometric macroscopic residual stress analysis

(2014) J.N. Wagner et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mantid—Data analysis and visualization package for neutron scattering andμSR experiments

(2014) O. Arnold et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT

Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting

(2012) K.N. Amato et al.   ACTA MATERIALIA

Validating classical line profile analyses using microbeam diffraction from individual dislocation cell walls and cell interiors

(2012) Lyle E. Levine et al.   JOURNAL OF APPLIED CRYSTALLOGRAPHY

ISODEC: software for calculating diffraction elastic constants

(2012) Thomas Gnäupel-Herold   JOURNAL OF APPLIED CRYSTALLOGRAPHY

Grain detection from 2d and 3d EBSD data—Specification of the MTEX algorithm

(2011) Florian Bachmann et al.   ULTRAMICROSCOPY

TEM Study of High-Temperature Precipitation of Delta Phase in Inconel 718 Alloy

(2011) Moukrane Dehmas et al.   Advances in Materials Science and Engineering