Mitigating the damage of ultra-high performance concrete at elevated temperatures using synergistic flame-retardant polymer fibres

Experimental study on static and dynamic properties of fly ash-slag based strain hardening geopolymer composites

(2022) Yi Wang et al.   CEMENT & CONCRETE COMPOSITES

Influence of waste glass powder as a supplementary cementitious material (SCM) on physical and mechanical properties of cement paste under high temperatures

(2022) Xi Jiang et al.   Journal of Cleaner Production

Study on real-time heat release rate inversion for dynamic reconstruction and visualization of tunnel fire scenarios

(2022) Chao Guo et al.   TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY

Evolution of elastic and thermal properties of cementitious composites containing micro-size lightweight fillers after exposure to elevated temperature

(2021) Zhenglai Shen et al.   CEMENT & CONCRETE COMPOSITES

Multi-level micromechanical analysis of elastic properties of ultra-high performance concrete at high temperatures: Effects of imperfect interface and inclusion size

(2021) Tong Zhang et al.   COMPOSITE STRUCTURES

On the moisture migration of concrete subject to high temperature with different heating rates

(2021) Lei Shen et al.   CEMENT AND CONCRETE RESEARCH

A review: Material and structural properties of UHPC at elevated temperatures or fire conditions

(2021) Yanping Zhu et al.   CEMENT & CONCRETE COMPOSITES

Behaviour of recycled tyre polymer fibre reinforced concrete at elevated temperatures

(2021) Meng Chen et al.   CEMENT & CONCRETE COMPOSITES

Characterizing the thermal properties of hybrid polypropylene-steel fiber reinforced concrete under heat exposure: Insights into fiber geometry and orientation distribution

(2021) Tong Zhang et al.   COMPOSITE STRUCTURES

Compressive and flexural properties of ultra-high performance fiber-reinforced cementitious composite: The effect of coarse aggregate

(2020) Fanghong Wu et al.   COMPOSITE STRUCTURES

Characterizing and analyzing the residual interfacial behavior of steel fibers embedded into cement-based matrices after exposure to high temperatures

(2020) Yao Zhang et al.   COMPOSITES PART B-ENGINEERING

Effect of natural fibers on thermal spalling resistance of ultra-high performance concrete

(2020) Dong Zhang et al.   CEMENT & CONCRETE COMPOSITES

Fractal characteristics of pore structure of hybrid Basalt–Polypropylene fibre-reinforced concrete

(2020) Dan Li et al.   CEMENT & CONCRETE COMPOSITES

Modeling the instantaneous phase composition of cement pastes under elevated temperatures

(2020) Chao Jiang et al.   CEMENT AND CONCRETE RESEARCH

Effect of Temperature on Thermal Properties of Ultrahigh-Performance Concrete

(2020) Venkatesh Kodur et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Multiscale micromechanical analysis of alkali-activated fly ash-slag paste

(2020) Guohao Fang et al.   CEMENT AND CONCRETE RESEARCH

A review of mechanical properties of fibre reinforced concrete at elevated temperatures

(2020) Heyang Wu et al.   CEMENT AND CONCRETE RESEARCH

Multi-scale analysis on thermal properties of cement-based materials containing micro-encapsulated phase change materials

(2020) Amitha Jayalath et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental investigation and prediction of elastic modulus of ultra-high performance concrete (UHPC) based on its composition

(2020) Xue Ouyang et al.   CEMENT AND CONCRETE RESEARCH

Experimental investigation and multi-level modeling of the effective thermal conductivity of hybrid micro-fiber reinforced cementitious composites at elevated temperatures

(2020) Tong Zhang et al.   COMPOSITE STRUCTURES

Effect of moderate temperatures on compressive strength of ultra-high-performance concrete: A microstructural analysis

(2020) David Suescum-Morales et al.   CEMENT AND CONCRETE RESEARCH

Experimental investigation on the evacuation performance of pedestrians in a three-lane urban tunnel with natural ventilation in a fire scenario

(2020) Yuxin Zhang et al.   TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

(2019) Yao Zhang et al.   INTERNATIONAL JOURNAL OF DAMAGE MECHANICS

Experimental study on dynamic compressive behaviour of recycled tyre polymer fibre reinforced concrete

(2019) Meng Chen et al.   CEMENT & CONCRETE COMPOSITES

Analysis of the mechanical and fracture behavior of heated ultra-high-performance fiber-reinforced concrete by X-ray computed tomography

(2019) José D. Ríos et al.   CEMENT AND CONCRETE RESEARCH

Preventive effects of polypropylene and jute fibers on spalling of UHPC at high temperatures in combination with waste porous ceramic fine aggregate as an internal curing material

(2019) Mitsuo Ozawa et al.   CONSTRUCTION AND BUILDING MATERIALS

The microstructural change of C-S-H at elevated temperature in Portland cement/GGBFS blended system

(2019) Zijian Jia et al.   CEMENT AND CONCRETE RESEARCH

Benefits of synthetic fibers on the residual mechanical performance of UHPFRC after exposure to ISO standard fire

(2019) Jung-Jun Park et al.   CEMENT & CONCRETE COMPOSITES

Thermal and mechanical properties of ultrahigh toughness cementitious composite with hybrid PVA and steel fibers at elevated temperatures

(2019) Qing-Hua Li et al.   COMPOSITES PART B-ENGINEERING

Expanded graphite assistant construction of gradient-structured char layer in PBS/Mg(OH)2 composites for improving flame retardancy, thermal stability and mechanical properties

(2019) Hao Chen et al.   COMPOSITES PART B-ENGINEERING

Development of a novel bio-inspired cement-based composite material to improve the fire resistance of engineering structures

(2019) Tong Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Fiber-reinforced geopolymer composites: A review

(2019) Navid Ranjbar et al.   CEMENT & CONCRETE COMPOSITES

Thinner fillers, coarser pores? A comparative study of the pore structure alterations of cement composites by graphene oxides and graphene nanoplatelets

(2019) Jiyang Wang et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Mechanical properties and microstructure of ultra-lightweight cement composites with fly ash cenospheres after exposure to high temperatures

(2018) Zhenyu Huang et al.   CONSTRUCTION AND BUILDING MATERIALS

Towards better characterizing thermal conductivity of cement-based materials: The effects of interfacial thermal resistance and inclusion size

(2018) Shilang Xu et al.   MATERIALS & DESIGN

Effects of geometry and fraction of polypropylene fibers on permeability of ultra-high performance concrete after heat exposure

(2018) Ye Li et al.   CEMENT AND CONCRETE RESEARCH

Synergistic effects of hybrid polypropylene and steel fibers on explosive spalling prevention of ultra-high performance concrete at elevated temperature

(2018) Ye Li et al.   CEMENT & CONCRETE COMPOSITES

Thermal conductivity of cementitious composites containing microencapsulated phase change materials

(2017) Alex Ricklefs et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

A novel hyperbranched poly(phosphorodiamidate) with high expansion degree and carbonization efficiency used for improving flame retardancy of APP/PP composites

(2017) Xinming Ye et al.   POLYMER DEGRADATION AND STABILITY

A multiphase micromechanical model for hybrid fiber reinforced concrete considering the aggregate and ITZ effects

(2016) Qing Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Real-time measurements of temperature, pressure and moisture profiles in High-Performance Concrete exposed to high temperatures during neutron radiography imaging

(2015) N. Toropovs et al.   CEMENT AND CONCRETE RESEARCH

Mechanical properties and flame-retardant of PP/MRP/Mg(OH)2/Al(OH)3 composites

(2015) J.Z. Liang et al.   COMPOSITES PART B-ENGINEERING

Numerical simulation of polypropylene fibres in concrete materials under fire conditions

(2015) G. Mazzucco et al.   COMPUTERS & STRUCTURES

Mechanical properties of concrete at high temperature—A review

(2015) Qianmin Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

A review on ultra high performance concrete: Part I. Raw materials and mixture design

(2015) Caijun Shi et al.   CONSTRUCTION AND BUILDING MATERIALS

A review on ultra high performance concrete: Part II. Hydration, microstructure and properties

(2015) Dehui Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Mesoscale model for thermal conductivity of concrete

(2015) Weiping Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental investigation of reinforced concrete and hybrid fibre reinforced concrete shield tunnel segments subjected to elevated temperature

(2015) Zhi-guo Yan et al.   FIRE SAFETY JOURNAL

High temperature behaviour of hybrid steel–PVA fibre reinforced reactive powder concrete

(2015) Sriskandarajah Sanchayan et al.   MATERIALS AND STRUCTURES

Effects of various fibres on high-temperature spalling in high-performance concrete

(2014) Mitsuo Ozawa et al.   CONSTRUCTION AND BUILDING MATERIALS

Microstructure and mechanical properties of RPC containing PP fibres at elevated temperatures

(2014) Wenzhong Zheng et al.   MAGAZINE OF CONCRETE RESEARCH

Stress–strain relationship of steel-fibre reinforced reactive powder concrete at elevated temperatures

(2014) Wenzhong Zheng et al.   MATERIALS AND STRUCTURES

Effects of ammonium polyphosphate to pentaerythritol ratio on composition and properties of carbonaceous foam deriving from intumescent flame-retardant polypropylene

(2014) Yin Xia et al.   POLYMER DEGRADATION AND STABILITY

Simultaneous assessment of phase chemistry, phase abundance and bulk chemistry with statistical electron probe micro-analyses: Application to cement clinkers

(2013) William Wilson et al.   CEMENT AND CONCRETE RESEARCH

High performance concrete under elevated temperatures

(2013) Abdullah Huzeyfe Akca et al.   CONSTRUCTION AND BUILDING MATERIALS

Thermal conductivity of PP/Al(OH)3/Mg(OH)2 composites

(2012) Ji-Zhao Liang   COMPOSITES PART B-ENGINEERING

Compressive behaviour of hybrid fiber-reinforced reactive powder concrete after high temperature

(2012) Wenzhong Zheng et al.   MATERIALS & DESIGN

Synthesis of ammonium polyphosphate with crystalline form V (APP-V) from melamine polyphosphate (MPP)

(2012) Wenyan Chen et al.   POLYMER DEGRADATION AND STABILITY

Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures

(2011) Wasim Khaliq et al.   CEMENT AND CONCRETE RESEARCH

Pore structure characterization of cement pastes blended with high-volume fly-ash

(2011) Qiang Zeng et al.   CEMENT AND CONCRETE RESEARCH

Influences of polymerization degree of ammonium polyphosphate on fire protection of waterborne intumescent fire resistive coating

(2011) Guojian Wang et al.   SURFACE & COATINGS TECHNOLOGY

Thermal degradation study of intumescent flame retardants by TG and FTIR: Melamine phosphate and its mixture with pentaerythritol

(2009) Zhengzhou Wang et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

The nano-mechanical signature of Ultra High Performance Concrete by statistical nanoindentation techniques

(2008) Luca Sorelli et al.   CEMENT AND CONCRETE RESEARCH

Polypropylene fibres in heated concrete. Part 2: Pressure relief mechanisms and modelling criteria

(2008) G. A. Khoury   MAGAZINE OF CONCRETE RESEARCH

Flame retardation and char formation mechanism of intumescent flame retarded polypropylene composites containing melamine phosphate and pentaerythritol phosphate

(2008) Shun Zhou et al.   POLYMER DEGRADATION AND STABILITY