On the moisture migration of concrete subject to high temperature with different heating rates

Fire spalling sensitivity of high-performance concrete in heated slabs under biaxial compressive loading

(2019) Francesco Lo Monte et al.   MATERIALS AND STRUCTURES

Modeling of 3D moisture distribution in heated concrete: From continuum towards mesoscopic approach

(2019) Dorjan Dauti et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

The influence of pore pressure on fracture behaviour of Normal-Strength and High-Performance Concretes at high temperature

(2019) Francesco Lo Monte et al.   CEMENT & CONCRETE COMPOSITES

Multiphysics Lattice Discrete Particle Model for the simulation of concrete thermal spalling

(2019) Lei Shen et al.   CEMENT & CONCRETE COMPOSITES

Analysis of moisture migration in concrete at high temperature through in-situ neutron tomography

(2018) Dorjan Dauti et al.   CEMENT AND CONCRETE RESEARCH

Behavior of ring-restrained high-performance concrete under extreme heating and development of screening test

(2018) Mitsuo Ozawa et al.   CONSTRUCTION AND BUILDING MATERIALS

Discrete element framework for modeling tertiary creep of concrete in tension and compression

(2018) Ioannis Boumakis et al.   ENGINEERING FRACTURE MECHANICS

Modeling concrete exposed to high temperature: Impact of dehydration and retention curves on moisture migration

(2018) D. Dauti et al.   INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS

Thick plain concrete targets subjected to high speed penetration of 30CrMnSiNi2A steel projectiles: Tests and analyses

(2018) Jun Feng et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Water Migration in One-Side Heated Concrete: 4D In-Situ CT Monitoring of the Moisture-Clog-Effect

(2018) Bartosz Powierza et al.   JOURNAL OF NONDESTRUCTIVE EVALUATION

Multiphysics Lattice Discrete Particle Modeling (M-LDPM) for the Simulation of Shale Fracture Permeability

(2018) Weixin Li et al.   ROCK MECHANICS AND ROCK ENGINEERING

Simulation of concrete failure and fiber reinforced polymer fracture in confined columns with different cross sectional shape

(2017) Chiara Ceccato et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Application of Powers’ model to modern portland and portland limestone cement pastes

(2017) Elizabeth I. Nadelman et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Heated slabs under biaxial compressive loading: a test set-up for the assessment of concrete sensitivity to spalling

(2017) Francesco Lo Monte et al.   MATERIALS AND STRUCTURES

Experimental and numerical investigation of the first heat-up of refractory concrete

(2016) Karl-Georg Fey et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Three-Dimensional Network Model for Coupling of Fracture and Mass Transport in Quasi-Brittle Geomaterials

(2016) Peter Grassl et al.   Materials

An armour-piercing projectile penetration in a double-layered target of ultra-high-performance fiber reinforced concrete and armour steel: Experimental and numerical analyses

(2016) Jun Feng et al.   MATERIALS & DESIGN

Real-time measurements of temperature, pressure and moisture profiles in High-Performance Concrete exposed to high temperatures during neutron radiography imaging

(2015) N. Toropovs et al.   CEMENT AND CONCRETE RESEARCH

Mesoscopic numerical simulation of effective thermal conductivity of tensile cracked concrete

(2015) Lei Shen et al.   CONSTRUCTION AND BUILDING MATERIALS

On a 2D hydro-mechanical lattice approach for modelling hydraulic fracture

(2015) P. Grassl et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

A method to estimate concrete hydraulic conductivity of underground tunnel to assess lining degradation

(2015) Paola Bagnoli et al.   TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY

Effects of various fibres on high-temperature spalling in high-performance concrete

(2014) Mitsuo Ozawa et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental discussion on the mechanisms behind the fire spalling of concrete

(2014) Jean-Christophe Mindeguia et al.   FIRE AND MATERIALS

Mechanical properties of photocatalytic white concrete subjected to high temperatures

(2013) Luigi Biolzi et al.   CEMENT & CONCRETE COMPOSITES

Lattice Discrete Particle Modeling (LDPM) of Alkali Silica Reaction (ASR) deterioration of concrete structures

(2013) Mohammed Alnaggar et al.   CEMENT & CONCRETE COMPOSITES

Discrete modeling of ultra-high-performance concrete with application to projectile penetration

(2013) Jovanca Smith et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Assessing the residual fracture properties of thermally damaged high strength concrete

(2013) Giovanni Di Luzio et al.   MECHANICS OF MATERIALS

Combining NDT techniques for improved evaluation of concrete properties

(2012) Zoubir-Mehdi Sbartaï et al.   CEMENT & CONCRETE COMPOSITES

Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. II: Calibration and validation

(2011) Gianluca Cusatis et al.   CEMENT & CONCRETE COMPOSITES

Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. I: Theory

(2011) Gianluca Cusatis et al.   CEMENT & CONCRETE COMPOSITES

Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures

(2011) Mugume Rodgers Bangi et al.   CEMENT AND CONCRETE RESEARCH

Fire spalling of concrete, as studied by NMR

(2011) G.H.A. van der Heijden et al.   CEMENT AND CONCRETE RESEARCH

Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures

(2011) Mugume Rodgers Bangi et al.   CEMENT AND CONCRETE RESEARCH

A three-dimensional staggered finite element approach for random parametric modeling of thermo-hygral coupled phenomena in porous media

(2011) F. Meftah et al.   INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS

What physical phenomena can be neglected when modelling concrete at high temperature? A comparative study. Part 2: Comparison between models

(2011) Dariusz Gawin et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

What physical phenomena can be neglected when modelling concrete at high temperature? A comparative study. Part 1: Physical phenomena and mathematical model

(2011) Dariusz Gawin et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

A fully generalised, coupled, multi-phase, hygro-thermo-mechanical model for concrete

(2010) Colin T. Davie et al.   MATERIALS AND STRUCTURES

Hygro-thermo-chemical modeling of high performance concrete. I: Theory

(2009) Giovanni Di Luzio et al.   CEMENT & CONCRETE COMPOSITES

Hygro-thermo-chemical modeling of high-performance concrete. II: Numerical implementation, calibration, and validation

(2009) Giovanni Di Luzio et al.   CEMENT & CONCRETE COMPOSITES

Experimental evidence of a moisture clog effect in cement-based materials under temperature

(2009) Xiao-Ting Chen et al.   CEMENT AND CONCRETE RESEARCH

Characterization of concrete properties from dielectric properties using ground penetrating radar

(2009) W.L. Lai et al.   CEMENT AND CONCRETE RESEARCH

Temperature, pore pressure and mass variation of concrete subjected to high temperature — Experimental and numerical discussion on spalling risk

(2009) Jean-Christophe Mindeguia et al.   CEMENT AND CONCRETE RESEARCH

The Influence of Pressure in the Pore System on Fire Spalling of Concrete

(2009) Robert Jansson et al.   FIRE TECHNOLOGY

Staggered Finite Volume Modeling of Transport Phenomena in Porous Materials with Convective Boundary Conditions

(2009) F. Meftah et al.   TRANSPORT IN POROUS MEDIA

Hydrothermal model for predicting fire-induced spalling in concrete structural systems

(2008) M.B. Dwaikat et al.   FIRE SAFETY JOURNAL

Pore pressure and explosive spalling in concrete

(2008) Long T. Phan   MATERIALS AND STRUCTURES

Experimental insight into spalling behavior of concrete tunnel linings under fire loading

(2008) Matthias Zeiml et al.   Acta Geotechnica