Self‐Regulative Direct Ink Writing of Frontally Polymerizing Thermoset Polymers

Soft pneumatic actuators by digital light processing combined with injection-assisted post-curing

(2021) Qiang Zhang et al.   APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION

3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications

(2021) Weiheng Xu et al.   Small

Spatially and optically tailored 3D printing for highly miniaturized and integrated microfluidics

(2021) Jose L. Sanchez Noriega et al.   Nature Communications

Direct writing of continuous carbon fibers/epoxy thermoset composites with high-strength and low energy-consumption

(2021) Zimeng Zhang et al.   Additive Manufacturing

Spin‐Printing of Liquid Crystal Polymer into Recyclable and Strong All‐Fiber Materials

(2021) Silvan Gantenbein et al.   ADVANCED FUNCTIONAL MATERIALS

Employing Photosensitizers for Rapid Olefin Metathesis Additive Manufacturing of Poly(dicyclopentadiene)

(2021) Samuel C. Leguizamon et al.   CHEMISTRY OF MATERIALS

Viewpoint: Homeostasis as Inspiration—Toward Interactive Materials

(2020) Michael M. Lerch et al.   ADVANCED MATERIALS

Stereolithography 3D-Printed Catalytically Active Devices in Organic Synthesis

(2020) Sergio Rossi et al.   Catalysts

Impact of Boundary Heat Losses on Frontal Polymerization

(2020) E. Goli et al.   JOURNAL OF PHYSICAL CHEMISTRY B

3D printing of multi-scalable structures via high penetration near-infrared photopolymerization

(2020) Junzhe Zhu et al.   Nature Communications

3D printed deformable sensors

(2020) Zhijie Zhu et al.   Science Advances

3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies

(2020) Zhijie Zhu et al.   Nature Reviews Materials

Self-adaptive flexible valve as passive flow regulator

(2020) Qiang Zhang et al.   Extreme Mechanics Letters

Xolography for linear volumetric 3D printing

(2020) Martin Regehly et al.   NATURE

Designing and transforming yield-stress fluids

(2019) Arif Z. Nelson et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Design of Monolithic Supports by 3D Printing for Its Application in the Preferential Oxidation of CO (CO-PrOx)

(2019) Cristian Yesid Chaparro-Garnica et al.   ACS Applied Materials & Interfaces

Voxelated soft matter via multimaterial multinozzle 3D printing

(2019) Mark A. Skylar-Scott et al.   NATURE

Particle-Free Emulsions for 3D Printing Elastomers

(2018) Brittany M. Rauzan et al.   ADVANCED FUNCTIONAL MATERIALS

Soft Somatosensitive Actuators via Embedded 3D Printing

(2018) Ryan L. Truby et al.   ADVANCED MATERIALS

3D Printed Functional and Biological Materials on Moving Freeform Surfaces

(2018) Zhijie Zhu et al.   ADVANCED MATERIALS

Extending yield-stress fluid paradigms

(2018) Arif Z. Nelson et al.   JOURNAL OF RHEOLOGY

High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing

(2018) Xiao Kuang et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing

(2018) Kaijuan Chen et al.   Soft Matter

3D Printing of PDMS Improves Its Mechanical and Cell Adhesion Properties

(2018) Veli Ozbolat et al.   ACS Biomaterials-Science & Engineering

3D Printing of PDMS Improves Its Mechanical and Cell Adhesion Properties

(2018) Veli Ozbolat et al.   ACS Biomaterials Science & Engineering

Rapid energy-efficient manufacturing of polymers and composites via frontal polymerization

(2018) Ian D. Robertson et al.   NATURE

Printing ferromagnetic domains for untethered fast-transforming soft materials

(2018) Yoonho Kim et al.   NATURE

Self‐Regulating Capabilities in Photonic Robotics

(2018) Daniele Martella et al.   Advanced Materials Technologies

Alkyl Phosphite Inhibitors for Frontal Ring-Opening Metathesis Polymerization Greatly Increase Pot Life

(2017) Ian D. Robertson et al.   ACS Macro Letters

Click chemistry stereolithography for soft robots that self-heal

(2017) T. J. Wallin et al.   Journal of Materials Chemistry B

3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties

(2017) James P. Lewicki et al.   Scientific Reports

Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications

(2016) Rouhollah D. Farahani et al.   ADVANCED MATERIALS

Printing soft matter in three dimensions

(2016) Ryan L. Truby et al.   NATURE

Laser-assisted direct ink writing of planar and 3D metal architectures

(2016) Mark A. Skylar-Scott et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Frontal Ring-Opening Metathesis Polymerization of Exo-Dicyclopentadiene for Low Catalyst Loadings

(2016) Ian D. Robertson et al.   ACS Macro Letters

MultiFab

(2015) Pitchaya Sitthi-Amorn et al.   ACM TRANSACTIONS ON GRAPHICS

Continuous liquid interface production of 3D objects

(2015) J. R. Tumbleston et al.   SCIENCE

3D-Printing of Lightweight Cellular Composites

(2014) Brett G. Compton et al.   ADVANCED MATERIALS

Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing

(2014) R D Farahani et al.   JOURNAL OF MICROMECHANICS AND MICROENGINEERING

Advances in the frontal ring opening metathesis polymerization of dicyclopentadiene

(2014) Andrea Ruiu et al.   JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY

Mail-order microfluidics: evaluation of stereolithography for the production of microfluidic devices

(2014) Anthony K. Au et al.   LAB ON A CHIP

Properties of Polylactide Inks for Solvent-Cast Printing of Three-Dimensional Freeform Microstructures

(2014) Shuang-Zhuang Guo et al.   LANGMUIR

Frontal Reaction of Epoxy Oligomers in Tubular Flux Reactors

(2013) Anahit O. Tonoyan et al.   Macromolecular Reaction Engineering

Solvent-Cast Three-Dimensional Printing of Multifunctional Microsystems

(2013) Shuang-Zhuang Guo et al.   Small

Synthetic homeostatic materials with chemo-mechano-chemical self-regulation

(2012) Ximin He et al.   NATURE

Integrated 3D-printed reactionware for chemical synthesis and analysis

(2012) Mark D. Symes et al.   Nature Chemistry

Three-Dimensional Printing of Interconnects by Laser Direct-Write of Silver Nanopastes

(2010) Jiwen Wang et al.   ADVANCED MATERIALS

Assembly of large-area, highly ordered, crack-free inverse opal films

(2010) B. Hatton et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Ultraviolet-Assisted Direct-Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils

(2009) Louis Laberge Lebel et al.   ADVANCED MATERIALS