Thermal performance of the building envelope integrated with phase change material for thermal energy storage: an updated review.

Energy efficiency optimization of PCM and aerogel-filled multiple glazing windows

(2021) Shu Zhang et al.   ENERGY

Thermal efficiency of PCM filled double glazing units in Egypt

(2021) Ahmed M. Bolteya et al.   Ain Shams Engineering Journal

Effects of carbon-based fillers on thermal properties of fatty acids and their eutectics as phase change materials used for thermal energy storage: A Review

(2021) Amir Al-Ahmed et al.   Journal of Energy Storage

Scientometric review of international research trends on thermal energy storage cement based composites via integration of phase change materials from 1993 to 2020

(2021) Sher Afgan et al.   CONSTRUCTION AND BUILDING MATERIALS

Thermophysical Properties of Cement Mortar Containing Waste Glass Powder

(2021) Oumaima Nasry et al.   Crystals

Regional climate effects on the optimal thermal resistance and capacitance of residential building walls

(2021) Jianming Yang et al.   ENERGY AND BUILDINGS

Experimental and numerical investigation of PCM capsules as insulation materials inserted into a hollow brick wall

(2021) Hayder M. Abbas et al.   ENERGY AND BUILDINGS

Evaluation of the impact of thermal performance on various building bricks and blocks: A review

(2021) D.S. Vijayan et al.   Environmental Technology & Innovation

Form-stable Phase Change Composites: Preparation, Performance, and Applications for Thermal Energy Conversion, Storage and Management

(2021) M.Q. Wu et al.   Energy Storage Materials

Performance of energy storage system containing cement mortar and PCM/epoxy/SiC composite fine aggregate

(2021) Dong Ho Yoo et al.   APPLIED THERMAL ENGINEERING

Sustainable rubberized concrete mixed with surface treated PCM lightweight aggregates subjected to high temperature cycle

(2021) Phattharachai Pongsopha et al.   CONSTRUCTION AND BUILDING MATERIALS

Improvement in thermal properties of PCM/Expanded vermiculite/expanded graphite shape stabilized composite PCM for building energy applications

(2021) Pushpendra Kumar Singh Rathore et al.   RENEWABLE ENERGY

Recent Advances on Enhanced Thermal Conduction in Phase Change Materials using Carbon Nanomaterials

(2021) Apurv Yadav et al.   Journal of Energy Storage

Seasonal and annual performance analysis of PCM-integrated building brick under the climatic conditions of Marmara region

(2020) Ekrem Tunçbilek et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Development of polyurethane foam incorporating phase change material for thermal energy storage

(2020) C. Amaral et al.   Journal of Energy Storage

Thermal performance and corrosion resistance of structural-functional concrete made with inorganic PCM

(2020) Ehsan Mohseni et al.   CONSTRUCTION AND BUILDING MATERIALS

Thermal behavior of cement mortar embedded with low-phase transition temperature PCM

(2020) Jung Heum Yeon   CONSTRUCTION AND BUILDING MATERIALS

Thermophysical properties and applications of nano-enhanced PCMs: An update review

(2020) Liu Yang et al.   ENERGY CONVERSION AND MANAGEMENT

Numerical study on forced convection of water-based suspensions of nanoencapsulated PCM particles/Al2O3 nanoparticles in a mini-channel heat sink

(2020) C.J. Ho et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Performance improvement of solar thermal systems integrated with phase change materials (PCM), a review

(2020) F.S. Javadi et al.   SOLAR ENERGY

Systematic review of encapsulation and shape-stabilization of phase change materials

(2020) Carolina Cárdenas-Ramírez et al.   Journal of Energy Storage

Building bricks with phase change material (PCM): Thermal performances

(2020) Mustapha Mahdaoui et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluation of pumice for development of low-cost and energy-efficient composite phase change materials and lab-scale thermoregulation performances of its cementitious plasters

(2020) Ahmet Sarı et al.   ENERGY

A comparative life cycle assessment (LCA) of different insulation materials for buildings in the continental Mediterranean climate

(2020) Noelia Llantoy et al.   ENERGY AND BUILDINGS

Recent development on heat transfer and various applications of phase-change materials

(2020) Liu Yang et al.   JOURNAL OF CLEANER PRODUCTION

A review on phase change materials for thermal energy storage in buildings: Heating and hybrid applications

(2020) Khaireldin Faraj et al.   Journal of Energy Storage

A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage

(2020) Shuai Zhang et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Experimental apparatus and methodology to test and quantify thermal performance of micro and macro-encapsulated phase change materials in building envelope applications

(2020) Sajith Wijesuriya et al.   Journal of Energy Storage

Experimental case studies of the effect of Al2O3 and MWCNTs nanoparticles on heating and cooling of PCM

(2020) Muhammad Aqib et al.   Case Studies in Thermal Engineering

Experimental and numerical analysis of the thermal performance of polyurethane foams panels incorporating phase change material

(2020) C. Amaral et al.   ENERGY

Silica fume/capric acid-stearic acid PCM included-cementitious composite for thermal controlling of buildings: Thermal energy storage and mechanical properties

(2020) Gökhan Hekimoğlu et al.   ENERGY

Thermal conductivity of cement paste containing waste glass powder, metakaolin and limestone filler as supplementary cementitious material

(2020) Yuanbo Du et al.   JOURNAL OF CLEANER PRODUCTION

Incorporation of phase change materials into building envelope for thermal comfort and energy saving: A comprehensive analysis

(2020) Qudama Al-Yasiri et al.   Journal of Building Engineering

Building envelope design: Multi-objective optimization to minimize energy consumption, global cost and thermal discomfort. Application to different Italian climatic zones

(2019) Fabrizio Ascione et al.   ENERGY

Polyethylene glycol/halloysite@Ag nanocomposite PCM for thermal energy storage: Simultaneously high latent heat and enhanced thermal conductivity

(2019) Shaokun Song et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

(2019) Z.X. Li et al.   ENERGY CONVERSION AND MANAGEMENT

A review of microencapsulated and composite phase change materials: Alteration of strength and thermal properties of cement-based materials

(2019) Sarra Drissi et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Micro/nano-encapsulated phase change materials (PCMs) as emerging materials for the food industry

(2019) Elham Alehosseini et al.   TRENDS IN FOOD SCIENCE & TECHNOLOGY

Phase change material blind system for double skin façade integration: System development and thermal performance evaluation

(2019) Yilin Li et al.   APPLIED ENERGY

Thermal enhanced cement-lime mortars with phase change materials (PCM), lightweight aggregate and cellulose fibers

(2019) Cynthia Guardia et al.   CONSTRUCTION AND BUILDING MATERIALS

Potential of macroencapsulated PCM for thermal energy storage in buildings: A comprehensive review

(2019) Pushpendra Kumar Singh Rathore et al.   CONSTRUCTION AND BUILDING MATERIALS

PCM integrated to external building walls: An optimization study on maximum activation of latent heat

(2019) Müslüm Arıcı et al.   APPLIED THERMAL ENGINEERING

Optical and thermal performance of glazing units containing PCM in buildings: A review

(2019) Dong Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Feasibility study on the year-round operation of PCM based free cooling systems in tropical climatic conditions

(2019) Karthik Panchabikesan et al.   ENERGY

Potential of microencapsulated PCM for energy savings in buildings: A critical review

(2019) Pushpendra Kumar Singh Rathore et al.   Sustainable Cities and Society

Experimental assessment of Phase Change Material (PCM) embedded bricks for passive conditioning in buildings

(2019) Rajat Saxena et al.   RENEWABLE ENERGY

Passive thermal behaviour of buildings: Performance of external multi-layered walls and influence of internal walls

(2018) Francesco Leccese et al.   APPLIED ENERGY

Phase-change materials (PCM) for automotive applications: A review

(2018) Joris Jaguemont et al.   APPLIED THERMAL ENGINEERING

A polymer-coated calcium chloride hexahydrate/expanded graphite composite phase change material with enhanced thermal reliability and good applicability

(2018) Kunjie Yuan et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Latent and sensible heat analysis of PCM incorporated in a brick for cold and hot climatic conditions, utilizing computational fluid dynamics

(2018) Soroush Dabiri et al.   ENERGY

PCM-mortar based construction materials for energy efficient buildings: A review on research trends

(2018) V. Venkateswara Rao et al.   ENERGY AND BUILDINGS

Thermochemical seasonal solar energy storage for heating and cooling of buildings

(2018) Gorazd Krese et al.   ENERGY AND BUILDINGS

Evaluation of paraffin infiltrated in various porous silica matrices as shape-stabilized phase change materials for thermal energy storage

(2018) Yuzhong Zhang et al.   ENERGY CONVERSION AND MANAGEMENT

Thermal inertia in buildings: A review of impacts across climate and building use

(2018) Stijn Verbeke et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Form-stable phase change material based on Na 2 CO 3 ·10H 2 O-Na 2 HPO 4 ·12H 2 O eutectic hydrated salt/expanded graphite oxide composite: The influence of chemical structures of expanded graphite oxide

(2018) Yushi Liu et al.   RENEWABLE ENERGY

Numerical and experimental study on the use of microencapsulated phase change materials (PCMs) in textile reinforced concrete panels for energy storage

(2018) Myriam Bahrar et al.   Sustainable Cities and Society

Nanoconfinement effects on thermal properties of nanoporous shape-stabilized composite PCMs: A review

(2018) Hongyi Gao et al.   Nano Energy

Shape-stabilized phase change materials based on porous supports for thermal energy storage applications

(2018) Xiubing Huang et al.   CHEMICAL ENGINEERING JOURNAL

Ultrathin graphite sheets stabilized stearic acid as a composite phase change material for thermal energy storage

(2018) Chuanchang Li et al.   ENERGY

Optimization of phase change materials to improve energy performance within thermal comfort range in the South Korean climate

(2018) Ji Hun Park et al.   ENERGY AND BUILDINGS

Analytical solution for the study of time lag and decrement factor for building walls in climate of Iran

(2017) Reza Fathipour et al.   ENERGY

Thermal effects of a novel phase change material (PCM) plaster under different insulation and heating scenarios

(2017) Yuka Kusama et al.   ENERGY AND BUILDINGS

Optimal location of PCM layer in building walls under Nanjing (China) weather conditions

(2017) Xing Jin et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

A review for phase change materials (PCMs) in solar absorption refrigeration systems

(2017) Mohammed Mumtaz A. Khan et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Heat transfer study of phase change materials with graphene nano particle for thermal energy storage

(2017) Karunesh Kant et al.   SOLAR ENERGY

Synthesis and properties of microencapsulated octadecane with silica shell as shape–stabilized thermal energy storage materials

(2017) Fang Tang et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Thermal performance of a window shutter containing PCM: Numerical validation and experimental analysis

(2016) Tiago Silva et al.   APPLIED ENERGY

Numerical analysis for the optimal location of a thin PCM layer in frame walls

(2016) Xing Jin et al.   APPLIED THERMAL ENGINEERING

Compatibility of materials for macroencapsulation of inorganic phase change materials: Experimental corrosion study

(2016) Svetlana Ushak et al.   APPLIED THERMAL ENGINEERING

Incorporating environmental evaluation and thermal properties of concrete mix designs

(2016) Mehdi Robati et al.   CONSTRUCTION AND BUILDING MATERIALS

Synthesis and characterization of lauric acid/expanded vermiculite as form-stabilized thermal energy storage materials

(2016) Ruilong Wen et al.   ENERGY AND BUILDINGS

Development of PCM cool roof system to control urban heat island considering temperate climatic conditions

(2016) Min Hee Chung et al.   ENERGY AND BUILDINGS

Modified lime-cement plasters with enhanced thermal and hygric storage capacity for moderation of interior climate

(2016) Zbyšek Pavlík et al.   ENERGY AND BUILDINGS

Phase change materials (PCM) for cooling applications in buildings: A review

(2016) Farah Souayfane et al.   ENERGY AND BUILDINGS

A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility

(2016) Zakir Khan et al.   ENERGY CONVERSION AND MANAGEMENT

A review on phase change material (PCM) for sustainable passive cooling in building envelopes

(2016) Hussein Akeiber et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Literature review on the use of phase change materials in glazing and shading solutions

(2016) Tiago Silva et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review

(2016) Jessica Giro-Paloma et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Application of TCE-PCM based heat sinks for cooling of electronic components: A review

(2016) Santosh Kumar Sahoo et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Thermal energy storage in building integrated thermal systems: A review. Part 1. active storage systems

(2016) Lidia Navarro et al.   RENEWABLE ENERGY

Thermal performance of a PCM-filled double-glazing unit with different thermophysical parameters of PCM

(2016) Dong Li et al.   SOLAR ENERGY

Experimental research on the dynamic thermal performance of a novel triple-pane building window filled with PCM

(2016) Shuhong Li et al.   Sustainable Cities and Society

Thermal management of a Li-ion battery using carbon fiber-PCM composites

(2015) A. Babapoor et al.   APPLIED THERMAL ENGINEERING

Lightweight dense/porous PCM-ceramic tiles for indoor temperature control

(2015) Rui M. Novais et al.   ENERGY AND BUILDINGS

Preparation of energy efficient paraffinic PCMs/expanded vermiculite and perlite composites for energy saving in buildings

(2015) Okyoung Chung et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Brick masonry walls with PCM macrocapsules: An experimental approach

(2014) Romeu Vicente et al.   APPLIED THERMAL ENGINEERING

A study on the thermal performance of exterior walls covered with a recently patented silica-aerogel-based insulating coating

(2014) Mohamad Ibrahim et al.   BUILDING AND ENVIRONMENT

On the placement of a phase change material thermal shield within the cavity of buildings walls for heat transfer rate reduction

(2014) Xing Jin et al.   ENERGY

Comparative environmental life cycle assessment of thermal insulation materials of buildings

(2014) Nuno Pargana et al.   ENERGY AND BUILDINGS

Optimization of PCM embedded in a floor panel developed for thermal management of the lightweight envelope of buildings

(2014) L. Royon et al.   ENERGY AND BUILDINGS

The effect of building envelope insulation on cooling energy consumption in summer

(2014) Zhaosong Fang et al.   ENERGY AND BUILDINGS

Designing building envelope with PCM wallboards: Design tool development

(2014) Arash Bastani et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Tetradecanol/expanded graphite composite form-stable phase change material for thermal energy storage

(2014) Ju-Lan Zeng et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Preparation and characterization of hydrated salts/silica composite as shape-stabilized phase change material via sol–gel process

(2014) Yuping Wu et al.   THERMOCHIMICA ACTA

Microencapsulation of n-octadecane phase change material with calcium carbonate shell for enhancement of thermal conductivity and serving durability: Synthesis, microstructure, and performance evaluation

(2013) Shiyu Yu et al.   APPLIED ENERGY

Experimental and multi-scale analysis of the thermal properties of Portland cement concretes embedded with microencapsulated Phase Change Materials (PCMs)

(2013) Anissa Eddhahak-Ouni et al.   APPLIED THERMAL ENGINEERING

Use of phase change materials for thermal energy storage in concrete: An overview

(2013) Tung-Chai Ling et al.   CONSTRUCTION AND BUILDING MATERIALS

Investigation of time lags and decrement factors for different building outside temperatures

(2013) Chuan Sun et al.   ENERGY AND BUILDINGS

Improving thermal comfort conditions by means of PCM glazing systems

(2013) Francesco Goia et al.   ENERGY AND BUILDINGS

Review of thermal energy storage technologies based on PCM application in buildings

(2013) Michal Pomianowski et al.   ENERGY AND BUILDINGS

Concrete roof with cylindrical holes containing PCM to reduce the heat gain

(2013) Hashem J. Alqallaf et al.   ENERGY AND BUILDINGS

Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency

(2013) N. Soares et al.   ENERGY AND BUILDINGS

Optimal preparation of PCM/diatomite composites for enhancing thermal properties

(2013) Su-Gwang Jeong et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Evaluation of PCM/diatomite composites using exfoliated graphite nanoplatelets (xGnP) to improve thermal properties

(2013) Su-Gwang Jeong et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Microencapsulation of caprylic acid with different wall materials as phase change material for thermal energy storage

(2013) Yeliz Konuklu et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

A numerical model to evaluate the thermal behaviour of PCM glazing system configurations

(2012) Francesco Goia et al.   ENERGY AND BUILDINGS

Thermal analysis of the application of pcm and low emissivity coating in hollow bricks

(2012) Paolo Principi et al.   ENERGY AND BUILDINGS

Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase change material

(2012) Zhengguo Zhang et al.   RENEWABLE ENERGY

Experimental tile with phase change materials (PCM) for building use

(2011) Isabel Cerón et al.   ENERGY AND BUILDINGS

Materials used as PCM in thermal energy storage in buildings: A review

(2011) L.F. Cabeza et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

An analysis of a packed bed latent heat thermal energy storage system using PCM capsules: Numerical investigation

(2009) A. Felix Regin et al.   RENEWABLE ENERGY

Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage

(2009) Ahmet Sarı et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Phase change materials for smart textiles – An overview

(2007) S. Mondal   APPLIED THERMAL ENGINEERING

Thermal conductivity of cement composites containing rubber waste particles: Experimental study and modelling

(2007) A. Benazzouk et al.   CONSTRUCTION AND BUILDING MATERIALS