Design and fabrication of a (6.4γ–Al2O3 + 18Al13Fe4)/Al (wt.%) composite utilizing fine grain strengthening and dispersion strengthening at elevated temperatures

Enhanced grain refinement and mechanical properties of a high–strength Al–Zn–Mg–Cu–Zr alloy induced by TiC nano–particles

(2021) Kai Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In-situ Al2O3-Al interface contribution towards the strength-ductility synergy of Al-CuO composite fabricated by solid-state reactive sintering

(2021) Xudong Rong et al.   SCRIPTA MATERIALIA

Design of an in–situ multi–scale particles reinforced (Al2O3+ZrB2+AlN)/Al composite with high strength, elasticity modulus and thermal stability

(2020) Yihan Bian et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An analysis of the influence of the precipitate type on the mechanical behavior of Al - Cu alloys by means of micropillar compression tests

(2020) B. Bellón et al.   ACTA MATERIALIA

To what extent does friction-stir welding deteriorate the properties of powder metallurgy Al?

(2020) Martin Balog et al.   Journal of Materials Research and Technology-JMR&T

Mn and Mo additions to a dilute Al-Zr-Sc-Er-Si-based alloy to improve creep resistance through solid-solution- and precipitation-strengthening

(2020) Anthony De Luca et al.   ACTA MATERIALIA

Synthesis of an Al-Based Composite Reinforced by Multi-Phase ZrB2, Al3BC and Al2O3 with Good Mechanical and Thermal Properties at Elevated Temperature

(2020) Yihan Bian et al.   Materials

Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys

(2020) B.N. Du et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Revealing the strengthening and toughening mechanisms of Al-CuO composite fabricated via in-situ solid-state reaction

(2020) Xudong Rong et al.   ACTA MATERIALIA

Developing high performance mechanical properties at elevated temperature in squeeze cast Al-Cu-Mn-Fe-Ni alloys

(2019) Bo Lin et al.   MATERIALS CHARACTERIZATION

Strengthening mechanisms and Hall-Petch stress of ultrafine grained Al-0.3%Cu

(2018) Tianlin Huang et al.   ACTA MATERIALIA

Microstructure and mechanical properties at both room and high temperature of in-situ TiC reinforced Al–4.5Cu matrix nanocomposite

(2018) Huabing Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The response of room temperature and high temperature tensile properties to the microstructure variation of an AlN + Si 3 N 4 /Al composite by heat treatment

(2018) Qingfei Xu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

HITEMAL-an outer sheath material for MgB 2 superconductor wires: The effect of annealing at 595–655 °C on the microstructure and properties

(2018) Martin Balog et al.   MATERIALS & DESIGN

A novel heat-resistant Al–Si–Cu–Ni–Mg base material synergistically strengthened by Ni-rich intermetallics and nano-AlNp microskeletons

(2018) Kaiqi Hu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Influence of grain boundaries with dispersed nanoscale Al2O3 particles on the strength of Al for a wide range of homologous temperatures

(2018) Martin Balog et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300°C

(2018) Y. H. Gao et al.   Materials Research Letters

Optimization of microstructure and mechanical property of a Mg-Zn-Y-Nd alloy by extrusion process

(2018) B.N. Du et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Synergetic strengthening far beyond rule of mixtures in gradient structured aluminum rod

(2016) Jordan Moering et al.   SCRIPTA MATERIALIA

A novel Al matrix composite reinforced by nano-AlNp network

(2016) X. Ma et al.   Scientific Reports

High-temperature mechanical properties and fracture mechanisms of Al–Si piston alloy reinforced with in situ TiB 2 particles

(2015) Gang Han et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Forged HITEMAL: Al-based MMCs strengthened with nanometric thick Al 2 O 3 skeleton

(2014) Martin Balog et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain growth and stabilisation of nanostructured aluminium at high temperatures: review

(2014) H. Asgharzadeh et al.   MATERIALS SCIENCE AND TECHNOLOGY

Microstructure and Strengthening Mechanisms in an Ultrafine Grained Al-Mg-Sc Alloy Produced by Powder Metallurgy

(2014) Tammy J. Harrell et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Improving aging and creep resistance in a dilute Al–Sc alloy by microalloying with Si, Zr and Er

(2013) N.Q. Vo et al.   ACTA MATERIALIA

Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al–Zr–Sc–Si alloys

(2012) Christopher Booth-Morrison et al.   ACTA MATERIALIA

Role of silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloys

(2012) C. Booth-Morrison et al.   ACTA MATERIALIA

Microstructure evolution and mechanical properties of Ni3Al/Al2O3 composite during self-propagation high-temperature synthesis and hot extrusion

(2012) L.Y. Sheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and properties of extruded rapidly solidified AlCr4.7Fe1.1Si0.3 (at.%) alloys

(2012) Miroslav Cavojsky et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The strain amplitude-controlled cyclic fatigue behavior of Al2O3 fiber reinforced Al–Si alloy composite at elevated temperatures

(2012) Guohua Zhang et al.   Progress in Natural Science-Materials International

Eutectic Al–Si–Cu–Fe–Mn alloys with enhanced mechanical properties at room and elevated temperature

(2011) E.R. Wang et al.   MATERIALS & DESIGN

Evolution of nickel-rich phases in Al–Si–Cu–Ni–Mg piston alloys with different Cu additions

(2011) Yang Yang et al.   MATERIALS & DESIGN

Extruded Al–Al2O3 composites formed in situ during consolidation of ultrafine Al powders: Effect of the powder surface area

(2011) Martin Balog et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Precipitation evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) alloys during isochronal aging

(2010) Keith E. Knipling et al.   ACTA MATERIALIA

The effect of native Al2O3 skin disruption on properties of fine Al powder compacts

(2010) Martin Balog et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during aging at 450–600°C

(2008) K KNIPLING   ACTA MATERIALIA

ECAP vs. direct extrusion—Techniques for consolidation of ultra-fine Al particles

(2008) Martin Balog et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Creep resistance of cast and aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at.%) alloys at 300–400°C

(2008) K KNIPLING et al.   SCRIPTA MATERIALIA

Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425°C

(2007) Keith E. Knipling et al.   ACTA MATERIALIA