标题
Defects and anomalies in powder bed fusion metal additive manufacturing
作者
关键词
Additive manufacturing, Powder-related defects, Processing-related defects, Post-processing-related defects, Defect mitigation, Process-structure–property relationship
出版物
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
Volume 26, Issue 2, Pages 100974
出版商
Elsevier BV
发表日期
2022-01-22
DOI
10.1016/j.cossms.2021.100974
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Defect-Based Fatigue Life Prediction of L-PBF Additive Manufactured Metals
- (2021) Niloofar Sanaei et al. ENGINEERING FRACTURE MECHANICS
- Effect of the scanning strategy on microstructure and mechanical anisotropy of Hastelloy X superalloy produced by Laser Powder Bed Fusion
- (2021) Xuan Zhang et al. MATERIALS CHARACTERIZATION
- Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges
- (2021) Uwe Zerbst et al. PROGRESS IN MATERIALS SCIENCE
- Toward in-situ flaw detection in laser powder bed fusion additive manufacturing through layerwise imagery and machine learning
- (2021) Zackary Snow et al. JOURNAL OF MANUFACTURING SYSTEMS
- Directional fatigue behaviour of maraging steel grade 300 produced by laser powder bed fusion
- (2021) Klas Solberg et al. INTERNATIONAL JOURNAL OF FATIGUE
- Powder Bed Fusion of nickel-based superalloys: A review
- (2021) Salomé Sanchez et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental investigation into microstructure, mechanical properties, and cracking mechanism of IN713LC processed by laser powder bed fusion
- (2021) M. Mohsin Raza et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Experimental investigation into the effect of supports and overhangs on accuracy and roughness in laser powder bed fusion
- (2021) Mattia Mele et al. OPTICS AND LASER TECHNOLOGY
- Investigation of laser powder bed fusion manufacturing and post-processing for surface quality of as-built 17-4PH stainless steel
- (2021) Kyung-Tae Yang et al. SURFACE & COATINGS TECHNOLOGY
- Effect of the Process Atmosphere Composition on Alloy 718 Produced by Laser Powder Bed Fusion
- (2021) Camille Pauzon et al. Metals
- Quantitative investigation of gas flow, powder-gas interaction, and powder behavior under different ambient pressure levels in laser powder bed fusion
- (2021) Xuxiao Li et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of surface geometry on laser powder bed fusion defects
- (2021) Alistair Jones et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Hot cracking in ZK60 magnesium alloy produced by laser powder bed fusion process
- (2021) Jinge Liu et al. MATERIALS LETTERS
- Numerical and experimental investigation into gas flow field and spattering phenomena in laser powder bed fusion processing of Inconel 718
- (2021) Cheng-Yen Chien et al. MATERIALS & DESIGN
- Additive manufacturing of heavy rare earth free high-coercivity permanent magnets
- (2020) A.S. Volegov et al. ACTA MATERIALIA
- Effects of crack orientation and heat treatment on fatigue-crack-growth behavior of AM 17-4 PH stainless steel
- (2020) Aref Yadollahi et al. ENGINEERING FRACTURE MECHANICS
- Effect of build location on microstructural characteristics and corrosion behavior of EB-PBF built Alloy 718
- (2020) P. Karimi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser metal deposition of copper on diverse metals using green laser sources
- (2020) Himani Siva Prasad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Supervised deep learning for real-time quality monitoring of laser welding with X-ray radiographic guidance
- (2020) Sergey Shevchik et al. Scientific Reports
- Subsurface Cooling Rates and Microstructural Response during Laser Based Metal Additive Manufacturing
- (2020) Vivek Thampy et al. Scientific Reports
- Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing
- (2020) M. Kahlin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders
- (2020) Daniel Powell et al. JOURNAL OF CLEANER PRODUCTION
- sAdditive Manufacturing of Magnetic Materials
- (2020) V. Chaudhary et al. PROGRESS IN MATERIALS SCIENCE
- Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
- (2020) Saad A. Khairallah et al. SCIENCE
- High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: Effect of sub-surface porosity and surface roughness
- (2020) Simone Romano et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- In-situ optical emission spectroscopy of selective laser melting
- (2020) Cody S. Lough et al. Journal of Manufacturing Processes
- Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy
- (2020) Vishwanadh Bathula et al. ACTA MATERIALIA
- Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms
- (2020) Ruidi Li et al. ACTA MATERIALIA
- Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L
- (2020) K.M. Bertsch et al. ACTA MATERIALIA
- High-Energy X-Ray Diffraction Microscopy in Materials Science
- (2020) Joel V. Bernier et al. Annual Review of Materials Research
- Pitting corrosion of 17-4PH stainless steel manufactured by laser beam melting
- (2020) Adrien Barroux et al. CORROSION SCIENCE
- Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding
- (2020) S. Mohammad H. Hojjatzadeh et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Thermodynamic Investigation of New High-Strength Low-Alloy Steels with Heusler Phase Strengthening for Welding and Additive Manufacturing: High-Throughput CALPHAD Calculations and Key Experiments for Database Verification
- (2020) Xin Wang et al. JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION
- Investigations on the fracture behavior of Inconel 718 superalloys obtained from cast and additive manufacturing processes
- (2020) B. Vieille et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Melting, fusion and solidification behaviors of Ti-6Al-4V alloy in selective laser melting at different scanning speeds
- (2020) Snehashis Pal et al. RAPID PROTOTYPING JOURNAL
- Influence of Heat Input on the Formation of Laves Phases and Hot Cracking in Plasma Arc Welding (PAW) Additive Manufacturing of Inconel 718
- (2020) Teresa Artaza et al. Metals
- Energy-Coupling Mechanisms Revealed through Simultaneous Keyhole Depth and Absorptance Measurements during Laser-Metal Processing
- (2020) Troy R. Allen et al. Physical Review Applied
- Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: State of the art review
- (2020) R. Acevedo et al. Journal of Materials Research and Technology-JMR&T
- In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing
- (2020) J. Logan McNeil et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Cooling dynamics of two titanium alloys during laser powder bed fusion probed with in situ X-ray imaging and diffraction
- (2020) Nicholas P. Calta et al. MATERIALS & DESIGN
- Invited Review: Machine Learning for Materials Developments in Metals Additive Manufacturing
- (2020) N.S. Johnson et al. Additive Manufacturing
- Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing
- (2020) Zhenlin Xu et al. CORROSION SCIENCE
- Effect of microstructural constituents on mechanical properties and fracture toughness of Inconel 718 with anomalous deformation behavior at 650 °C
- (2020) R. Firoz et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Critical instability at moving keyhole tip generates porosity in laser melting
- (2020) Cang Zhao et al. SCIENCE
- Direct comparison of microstructure-sensitive fatigue crack initiation via crystal plasticity simulations and in situ high-energy X-ray experiments
- (2020) Veerappan Prithivirajan et al. MATERIALS & DESIGN
- A modified El-Haddad model for versatile defect tolerant design
- (2020) Luke Sheridan INTERNATIONAL JOURNAL OF FATIGUE
- Experimental study of effect of post processing on fracture toughness and fatigue crack growth performance of selective laser melting Ti-6Al-4V
- (2019) Haiying ZHANG et al. Chinese Journal of Aeronautics
- Effect of Post-heat Treatment on the Corrosion Behavior of AlSi10Mg Alloy Produced by Additive Manufacturing
- (2019) Amit Zakay et al. JOM
- Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization
- (2019) Laura Cordova et al. JOM
- Alumina loss mechanism of Al2O3-AlSi10 Mg composites during selective laser melting
- (2019) Hailong Liao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property
- (2019) Zhaopeng Tong et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Localized Changes of Stainless Steel Powder Characteristics During Selective Laser Melting Additive Manufacturing
- (2019) D. Galicki et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A Comprehensive Study of Steel Powders (316L, H13, P20 and 18Ni300) for Their Selective Laser Melting Additive Manufacturing
- (2019) Jujie Yan et al. Metals
- In-situ high-speed X-ray imaging of piezo-driven directed energy deposition additive manufacturing
- (2019) Sarah J. Wolff et al. Scientific Reports
- Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
- (2019) Ross Cunningham et al. SCIENCE
- Microstructure Development of 308L Stainless Steel During Additive Manufacturing
- (2019) D. W. Brown et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of working environment and built orientation on the tensile properties of selective laser melted AlSi10Mg alloy
- (2019) Srinivasa Rakesh Ch et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the use of 2D moment invariants in the classification of additive manufacturing powder feedstock
- (2019) Ryan Harrison et al. MATERIALS CHARACTERIZATION
- In situ detection of thermally induced porosity in additively manufactured and sintered objects
- (2019) Einat Strumza et al. JOURNAL OF MATERIALS SCIENCE
- Traceable Porosity Measurements in Industrial Components Using X-Ray Computed Tomography
- (2019) Petr Hermanek et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Fine Grains Reduce Cracking Susceptibility During Solidification: Insights from Phase-Field Simulations
- (2019) Ping Jiang et al. JOM
- Crack Paths in Additive Manufactured Metallic Materials Subjected to Multiaxial Cyclic Loads Including Surface Roughness, HIP, and Notch Effects
- (2019) Reza Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffolds
- (2019) Alexander Kopp et al. Acta Biomaterialia
- Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
- (2019) M.J. Bermingham et al. ACTA MATERIALIA
- Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing
- (2019) Jianchao Ye et al. ADVANCED ENGINEERING MATERIALS
- High-speed X-ray investigation of melt dynamics during continuous-wave laser remelting of selective laser melted Co-Cr alloy
- (2019) Brodan Richter et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Statistical approach for electrochemical evaluation of the effect of heat treatments on the corrosion resistance of AlSi10Mg alloy by laser powder bed fusion
- (2019) M. Cabrini et al. ELECTROCHIMICA ACTA
- From in-situ monitoring toward high-throughput process control: cost-driven decision-making framework for laser-based additive manufacturing
- (2019) Ruholla Jafari-Marandi et al. JOURNAL OF MANUFACTURING SYSTEMS
- Influence of thermal post treatments on microstructure and oxidation behavior of EB-PBF manufactured Alloy 718
- (2019) Esmaeil Sadeghi et al. MATERIALS CHARACTERIZATION
- The effect of sub-grain structure on intergranular corrosion of 316L stainless steel fabricated via selective laser melting
- (2019) Cheng Man et al. MATERIALS LETTERS
- Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts
- (2019) Usman Ali et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An experimental study of residual stress and direction-dependence of fatigue crack growth behaviour in as-built and stress-relieved selective-laser-melted Ti6Al4V
- (2019) Abdul Khadar Syed et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Computed tomography based procedure for reproducible porosity measurement of additive manufactured samples
- (2019) Tomáš Zikmund et al. NDT & E INTERNATIONAL
- Dynamics of pore formation during laser powder bed fusion additive manufacturing
- (2019) Aiden A. Martin et al. Nature Communications
- Influences of tilt angles on microstructure and mechanical properties of 316L stainless steel parts fabricated by selective laser melting (SLM)
- (2019) Cong Ni et al. Materials Research Express
- Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy
- (2019) Wei Xiong et al. MATERIALS & DESIGN
- Coercivity enhancement of selective laser sintered NdFeB magnets by grain boundary infiltration
- (2019) Christian Huber et al. ACTA MATERIALIA
- Laser‐Induced Keyhole Defect Dynamics during Metal Additive Manufacturing
- (2019) Andrew M. Kiss et al. ADVANCED ENGINEERING MATERIALS
- Geometrical metrology for metal additive manufacturing
- (2019) R.K. Leach et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Modified inherent strain method for efficient prediction of residual deformation in direct metal laser sintered components
- (2019) Xuan Liang et al. COMPUTATIONAL MECHANICS
- Effect of post-treatment on the microstructure and high-temperature oxidation behaviour of additively manufactured inconel 718 alloy
- (2019) Yeon-Ji Kang et al. CORROSION SCIENCE
- Analytical evaluation of defect generation for selective laser melting of metals
- (2019) Patcharapit Promoppatum et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effect of primary processing parameters on surface roughness in laser powder bed additive manufacturing
- (2019) Bo Whip et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Cyclic deformation and fatigue behavior of additively manufactured 17–4 PH stainless steel
- (2019) Luiz Carneiro et al. INTERNATIONAL JOURNAL OF FATIGUE
- Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6Al-4V obtained by additive manufacturing
- (2019) Bastien Vayssette et al. INTERNATIONAL JOURNAL OF FATIGUE
- The influence of additive manufacturing processing parameters on surface roughness and fatigue life
- (2019) Joy Gockel et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment
- (2019) P.D. Nezhadfar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Improving fatigue performances of selective laser melted Al-7Si-0.6Mg alloy via defects control
- (2019) Jeremy H. Rao et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure
- (2019) P.D. Nezhadfar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effects of Recycled Powder on Solidification Defects, Microstructure, and Corrosion Properties of DMLS Fabricated AlSi10Mg
- (2019) M. Rafieazad et al. JOM
- Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting
- (2019) Wenhui Yu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of manufacturing geometric defects on the mechanical properties of AlSi10Mg alloy fabricated by selective laser melting
- (2019) Panding Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Increasing keyhole stability of fiber laser welding under reduced ambient pressure
- (2019) Meng Jiang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion
- (2019) Dillon S. Watring et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of fine-grained and dislocation-populated CrMnFeCoNi high entropy alloy by laser engineered net shaping
- (2019) S. Guan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D characterization of defects in deep-powder-bed manufactured Ti–6Al–4V and their influence on tensile properties
- (2019) J. Elambasseril et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718
- (2019) Changhao Pei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dynamic keyhole behavior and keyhole instability in high power fiber laser welding of stainless steel
- (2019) Dabin Zhang et al. OPTICS AND LASER TECHNOLOGY
- Discrete element simulation of powder layer thickness in laser additive manufacturing
- (2019) Quanquan Han et al. POWDER TECHNOLOGY
- The effect of process parameters on the residual stress of selective laser melted Inconel 718 thin-walled part
- (2019) Changpeng Chen et al. RAPID PROTOTYPING JOURNAL
- Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics
- (2019) Nadia Kouraytem et al. Physical Review Applied
- Laser‐Based Additive Manufacturing Technologies for Aerospace Applications
- (2019) Nick Tepylo et al. ADVANCED ENGINEERING MATERIALS
- On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting
- (2019) Majid Laleh et al. CORROSION SCIENCE
- On microstructure and corrosion behaviour of AlSi10Mg alloy with low surface roughness fabricated by direct metal laser sintering
- (2019) P. Fathi et al. CORROSION SCIENCE
- Residual stress prediction in selective laser melting
- (2019) Leonardo Bertini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Towards predicting differences in fatigue performance of laser powder bed fused Ti-6Al-4V coupons from the same build
- (2019) P. Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF
- (2019) Mohamad Bayat et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Methods for Rapid Pore Classification in Metal Additive Manufacturing
- (2019) Robert Snell et al. JOM
- Microstructural control of alloy 718 fabricated by electron beam melting with expanded processing window by adaptive offset method
- (2019) Xiao Ding et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Surface and Subsurface Defects on Fatigue Behavior of AlSi10Mg Alloy Processed by Laser Powder Bed Fusion (L-PBF)
- (2019) Milad Hamidi Nasab et al. Metals
- Powder-spreading mechanisms in powder-bed-based additive manufacturing: Experiments and computational modeling
- (2019) Hui Chen et al. ACTA MATERIALIA
- In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting
- (2019) K. Sofinowski et al. ACTA MATERIALIA
- A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM)
- (2019) Binqi Liu et al. APPLIED MATHEMATICAL MODELLING
- Analytical modeling of lack-of-fusion porosity in metal additive manufacturing
- (2019) Jinqiang Ning et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting
- (2019) V. Cruz et al. CORROSION SCIENCE
- Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing
- (2019) Chengshuang Zhou et al. CORROSION SCIENCE
- Microscale interaction between laser and metal powder in powder-bed additive manufacturing: Conduction mode versus keyhole mode
- (2019) Hongze Wang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Selective laser melting of the hard-to-weld IN738LC superalloy: Efforts to mitigate defects and the resultant microstructural and mechanical properties
- (2019) H. Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: multiscale investigation
- (2019) Bassem Barkia et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Susceptibility of magnesium alloys to solidification cracking
- (2019) Kun Liu et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Defect Prevention in Selective Laser Melting Components: Compositional and Process Effects
- (2019) Hossein Eskandari Sabzi et al. Materials
- Additive manufacturing of fatigue resistant austenitic stainless steels by understanding process-structure–property relationships
- (2019) Jonathan W. Pegues et al. Materials Research Letters
- Solidification-driven orientation gradients in additively manufactured stainless steel
- (2019) Andrew T. Polonsky et al. ACTA MATERIALIA
- Finite interface dissipation phase field modeling of Ni–Nb under additive manufacturing conditions
- (2019) Kubra Karayagiz et al. ACTA MATERIALIA
- Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion
- (2019) David B. Witkin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects
- (2019) J.W. Pegues et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance
- (2019) R. Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Compositionally-tailored steel-based materials manufactured by electron beam melting using blended pre-alloyed powders
- (2019) Andrey Koptyug et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of ultrafine-grained high-strength titanium alloys
- (2019) Duyao Zhang et al. NATURE
- Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
- (2019) Xiaoqiang Zhang et al. MATERIALS & DESIGN
- Melt pool geometry and microstructure of Ti6Al4V with B additions processed by selective laser melting additive manufacturing
- (2019) Yining He et al. MATERIALS & DESIGN
- Improved fracture toughness by microalloying of Fe in Ti-6Al-4V
- (2019) Fuwen Chen et al. MATERIALS & DESIGN
- Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing
- (2019) Majid Laleh et al. CORROSION SCIENCE
- Ultra-fine bimodal (α + β) microstructure induced mechanical strength and corrosion resistance of Ti-6Al-4V alloy produced via laser powder bed fusion process
- (2019) B. Pazhanivel et al. OPTICS AND LASER TECHNOLOGY
- Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing
- (2019) Quanquan Han et al. OPTICS AND LASER TECHNOLOGY
- Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
- (2018) Qilin Guo et al. ACTA MATERIALIA
- Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion
- (2018) Fan Zhang et al. ACTA MATERIALIA
- A simple test for assessing solidification cracking susceptibility and checking validity of susceptibility prediction
- (2018) Tayfun Soysal et al. ACTA MATERIALIA
- Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
- (2018) Edouard Chauvet et al. ACTA MATERIALIA
- Fluid and particle dynamics in laser powder bed fusion
- (2018) P. Bidare et al. ACTA MATERIALIA
- Phase field simulation of powder bed-based additive manufacturing
- (2018) Liang-Xing Lu et al. ACTA MATERIALIA
- Corrosion behaviour of CoCrMo alloy fabricated by electron beam melting
- (2018) Xiaojuan Gong et al. CORROSION SCIENCE
- High temperature oxidation of IN 718 manufactured by laser beam melting and electron beam melting: Effect of surface topography
- (2018) Tom Sanviemvongsak et al. CORROSION SCIENCE
- Corrosion assessment of Ti-6Al-4V fabricated using laser powder-bed fusion additive manufacturing
- (2018) Tse-Ming Chiu et al. ELECTROCHIMICA ACTA
- Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
- (2018) S. Romano et al. ENGINEERING FRACTURE MECHANICS
- Dynamic simulation of powder packing structure for powder bed additive manufacturing
- (2018) Y. S. Lee et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach
- (2018) Haider Ali et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
- (2018) Jonathan Pegues et al. INTERNATIONAL JOURNAL OF FATIGUE
- Strain accumulation and fatigue crack initiation at pores and carbides in a SX superalloy at room temperature
- (2018) R. Jiang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Characterization of molten pool behavior and humping formation tendency in high-speed gas tungsten arc welding
- (2018) Xiangmeng Meng et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A numerical investigation on the physical mechanisms of single track defects in selective laser melting
- (2018) C. Tang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Effect of process parameters on the Selective Laser Melting (SLM) of tungsten
- (2018) Ravi K. Enneti et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Selective laser melting of tungsten and tungsten alloys
- (2018) Aljaž Iveković et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition
- (2018) René Streubel et al. JAPANESE JOURNAL OF APPLIED PHYSICS
- Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys
- (2018) Xiaojia Nie et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Heat treatments effects on functionalization and corrosion behavior of Ti-6Al-4V ELI alloy made by additive manufacturing
- (2018) Guilherme Arthur Longhitano et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fluid dynamical simulation of high speed micro welding
- (2018) Andreas Otto et al. JOURNAL OF LASER APPLICATIONS
- A Computationally Efficient Finite Element Framework to Simulate Additive Manufacturing Processes
- (2018) Shiyan Jayanath et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- From Process Condition to Build Quality through Modeling and Monitoring of In-process Layerwise Images in Laser Powder Bed Fusion Additive Manufacturing Process
- (2018) Farhad Imani et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- In-process Monitoring of Material Cross-Contamination Defects in Laser Powder Bed Fusion
- (2018) Mohammad Montazeri et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Porosity prediction: Supervised-learning of thermal history for direct laser deposition
- (2018) Mojtaba Khanzadeh et al. JOURNAL OF MANUFACTURING SYSTEMS
- Analysis of processing parameters and characteristics of selective laser melted high strength Al-Cu-Mg alloys: From single tracks to cubic samples
- (2018) Xiaojia Nie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Scaling laws for the additive manufacturing
- (2018) Alexander M. Rubenchik et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- General investigations on processing tool steel X40CrMoV5-1 with selective laser melting
- (2018) Julian Krell et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A comparative study on corrosion and microstructure of direct metal laser sintered AlSi10Mg_200C and die cast A360.1 aluminum
- (2018) Parisa Fathi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts
- (2018) Imade Koutiri et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L
- (2018) Rebecca F. Schaller et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718
- (2018) Andrew T. Polonsky et al. MATERIALS CHARACTERIZATION
- Effects of processing defects on the dynamic tensile mechanical behavior of laser-solid-formed Ti-6Al-4 V
- (2018) Peng-Hui Li et al. MATERIALS CHARACTERIZATION
- Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures
- (2018) Michaela Fousová et al. MATERIALS CHARACTERIZATION
- Microstructure and properties of novel AlSi11CuMn alloy manufactured by selective laser melting
- (2018) A.V. Pozdniakov et al. MATERIALS LETTERS
- Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting
- (2018) Tomasz Kurzynowski et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting
- (2018) Yung Suk Jeremy Yoo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V
- (2018) Haider Ali et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting
- (2018) Kun V. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dislocation network in additive manufactured steel breaks strength–ductility trade-off
- (2018) Leifeng Liu et al. Materials Today
- High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained
- (2018) Md. Shamsujjoha et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
- (2018) C. Körner et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Impact of Defects in Powder Feedstock Materials on Microstructure of 304L and 316L Stainless Steel Produced by Additive Manufacturing
- (2018) Benjamin M. Morrow et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A Computational Study on Porosity Evolution in Parts Produced by Selective Laser Melting
- (2018) J. L. Tan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- In situ process monitoring in selective laser sintering using optical coherence tomography
- (2018) Michael R. Gardner et al. OPTICAL ENGINEERING
- Review on thermal analysis in laser-based additive manufacturing
- (2018) Zhaorui Yan et al. OPTICS AND LASER TECHNOLOGY
- A comparative study of Ti-6Al-4V powders for additive manufacturing by gas atomization, plasma rotating electrode process and plasma atomization
- (2018) G. Chen et al. POWDER TECHNOLOGY
- Jamming during particle spreading in additive manufacturing
- (2018) Wenguang Nan et al. POWDER TECHNOLOGY
- Topography of as built surfaces generated in metal additive manufacturing: A multi scale analysis from form to roughness
- (2018) F. Cabanettes et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes
- (2018) Nicholas P. Calta et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting
- (2018) Kun V. Yang et al. SCRIPTA MATERIALIA
- Signatures of the unique microstructure of additively manufactured steel observed via diffraction
- (2018) R. Pokharel et al. SCRIPTA MATERIALIA
- Additive manufacturing of WC reinforced maraging steel 300 composites by cold spraying and selective laser melting
- (2018) Xingchen Yan et al. SURFACE & COATINGS TECHNOLOGY
- Finite Element Analysis of Interaction of Laser Beam with Material in Laser Metal Powder Bed Fusion Process
- (2018) Guang Fu et al. Materials
- Internal Friction Angle of Metal Powders
- (2018) Jiri Zegzulka et al. Metals
- In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry
- (2018) Philip J. DePond et al. MATERIALS & DESIGN
- Meso-scale modeling of multiple-layer fabrication process in Selective Electron Beam Melting: Inter-layer/track voids formation
- (2018) Wentao Yan et al. MATERIALS & DESIGN
- Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting
- (2018) Decheng Kong et al. MATERIALS & DESIGN
- The printability, microstructure, crystallographic features and microhardness of selective laser melted Inconel 718 thin wall
- (2018) Huihui Yang et al. MATERIALS & DESIGN
- Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring
- (2018) Yingjie Zhang et al. MATERIALS & DESIGN
- Mechanism of porosity formation and influence on mechanical properties in selective laser melting of Ti-6Al-4V parts
- (2018) Jonathan Stef et al. MATERIALS & DESIGN
- Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction
- (2018) Claire Bruna-Rosso et al. MATERIALS & DESIGN
- Forming and defect analysis for single track scanning in selective laser melting of Ti6Al4V
- (2018) Yu Xiang et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Tensile behavior of Ti-6Al-4V alloy fabricated by selective laser melting: effects of microstructures and as-built surface quality
- (2018) Pan Tao et al. China Foundry
- Characterization and oxidation resistance of additive manufactured and forged IN718 Ni-based superalloys
- (2018) C. Juillet et al. CORROSION SCIENCE
- On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting
- (2018) O. Gharbi et al. CORROSION SCIENCE
- Corrosion behavior of laser additive manufactured titanium alloy
- (2018) R. M. Mahamood et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects
- (2018) Reza Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
- (2018) Hiroshige Masuo et al. INTERNATIONAL JOURNAL OF FATIGUE
- Elucidation of keyhole induced bubble formation mechanism in fiber laser welding of low carbon steel
- (2018) Dongsheng Wu et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Overview on Microstructure- and Defect-Sensitive Fatigue Modeling of Additively Manufactured Materials
- (2018) Brian Torries et al. JOM
- Grain boundary and microstructure engineering of Inconel 690 cladding on stainless-steel 316L using electron powder bed fusion additive manufacturing
- (2018) I.A. Segura et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Coupled experimental and computational study of residual stresses in additively manufactured Ti-6Al-4V components
- (2018) M. Strantza et al. MATERIALS LETTERS
- Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
- (2018) Longchao Zhuo et al. MATERIALS LETTERS
- Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations
- (2018) S. J. Foster et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of Microstructure and Surface Roughness on Oxidation Kinetics at 500–600 °C of Ti–6Al–4V Alloy Fabricated by Additive Manufacturing
- (2018) Antoine Casadebaigt et al. OXIDATION OF METALS
- Characterisation Methods for Powder Bed Fusion Processed Surface Topography
- (2018) S. Lou et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Fabrication of Crack-Free Nickel-Based Superalloy Considered Non-Weldable during Laser Powder Bed Fusion
- (2018) Oscar Sanchez-Mata et al. Materials
- Effect of alloy element on weld pool dynamics in laser welding of aluminum alloys
- (2018) Masanori Miyagi et al. Scientific Reports
- Revealing particle-scale powder spreading dynamics in powder-bed-based additive manufacturing process by high-speed x-ray imaging
- (2018) Luis I. Escano et al. Scientific Reports
- Fatigue Behavior of As-Built L-PBF A357.0 Parts
- (2018) Elena Bassoli et al. Metals
- Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions
- (2018) D. Carluccio et al. Journal of Manufacturing Processes
- Ultrafast X-ray imaging of laser–metal additive manufacturing processes
- (2018) Niranjan D. Parab et al. JOURNAL OF SYNCHROTRON RADIATION
- Defects-dictated tensile properties of selective laser melted Ti-6Al-4V
- (2018) Thomas Voisin et al. MATERIALS & DESIGN
- Investigation of Pitting Corrosion Initiation and Propagation of a Type 316L Stainless Steel Manufactured by the Direct Metal Laser Sintering Process
- (2018) Claudia Prieto et al. CORROSION
- Corrosion of Additively Manufactured Alloys: A Review
- (2018) G. Sander et al. CORROSION
- A pragmatic continuum level model for the prediction of the onset of keyholing in laser powder bed fusion
- (2018) A. M. Philo et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Defect Identification and Mitigation Via Visual Inspection in Large-Scale Additive Manufacturing
- (2018) Michael Borish et al. JOM
- Selective Laser Melting of 316L Stainless Steel: Physics of Melting Mode Transition and Its Influence on Microstructural and Mechanical Behavior
- (2018) Akash Aggarwal et al. JOM
- Laser additive manufacturing of powdered bismuth telluride
- (2018) Haidong Zhang et al. JOURNAL OF MATERIALS RESEARCH
- Numerical simulation of powder flow during spreading in additive manufacturing
- (2018) Wenguang Nan et al. POWDER TECHNOLOGY
- Comparison of electropolished 316L steel samples manufactured by SLM and traditional technology
- (2018) Edyta Lyczkowska-Widlak et al. RAPID PROTOTYPING JOURNAL
- Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion
- (2018) Le Zhou et al. SCRIPTA MATERIALIA
- Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy
- (2018) Ahmed Maamoun et al. Materials
- Time-Resolved Absorptance and Melt Pool Dynamics during Intense Laser Irradiation of a Metal
- (2018) Brian J. Simonds et al. Physical Review Applied
- Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
- (2018) T. Mukherjee et al. Journal of Manufacturing Processes
- On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing
- (2018) Reza Esmaeilizadeh et al. Journal of Manufacturing Processes
- Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel
- (2018) Hahn Choo et al. MATERIALS & DESIGN
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- A high-resolution and large field-of-view scanner for in-line characterization of powder bed defects during additive manufacturing
- (2018) Le Tan Phuc et al. MATERIALS & DESIGN
- Modeling and characterization of cohesion in fine metal powders with a focus on additive manufacturing process simulations
- (2018) Christoph Meier et al. POWDER TECHNOLOGY
- Expanding particle size distribution and morphology of aluminium-silicon powders for Laser Beam Melting by dry coating with silica nanoparticles
- (2018) Michael Cornelius Hermann Karg et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Crack suppression in additively manufactured tungsten by introducing secondary-phase nanoparticles into the matrix
- (2018) Kailun Li et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Investigation of the mechanisms by which hot isostatic pressing improves the fatigue performance of powder bed fused Ti-6Al-4V
- (2018) P. Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of heat treatments on the corrosion mechanism of additive manufactured AlSi10Mg
- (2018) Tim Rubben et al. CORROSION SCIENCE
- The effect of powder oxidation on defect formation in laser additive manufacturing
- (2018) Chu Lun Alex Leung et al. ACTA MATERIALIA
- Notch-defect interaction in additively manufactured Inconel 718
- (2018) K. Solberg et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of the focus offset on the defects, microstructure, and mechanical properties of an Inconel 718 superalloy fabricated by electron beam additive manufacturing
- (2018) Hae-Jin Lee et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Critical influences of particle size and adhesion on the powder layer uniformity in metal additive manufacturing
- (2018) Christoph Meier et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The investigation of plume and spatter signatures on melted states in selective laser melting
- (2018) Dongsen Ye et al. OPTICS AND LASER TECHNOLOGY
- Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy
- (2018) Zhen Wang et al. OPTICS AND LASER TECHNOLOGY
- A statistical learning method for image-based monitoring of the plume signature in laser powder bed fusion
- (2018) M. Grasso et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Surface-active element transport and its effect on liquid metal flow in laser-assisted additive manufacturing
- (2017) Zhengtao Gan et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Investigation of remelting and preheating in SLM of 18Ni300 maraging steel as corrective and preventive measures for porosity reduction
- (2017) Ali Gökhan Demir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue properties of a titanium alloy (Ti–6Al–4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress
- (2017) Nikolas Hrabe et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of microstructure [alpha+beta and beta] on very high cycle fatigue behaviour of Ti-6Al-4V alloy
- (2017) Vincenzo Crupi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
- (2017) Daniel Greitemeier et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
- (2017) J. Günther et al. INTERNATIONAL JOURNAL OF FATIGUE
- Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
- (2017) Ming Tang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of fatigue resistant materials: Challenges and opportunities
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes
- (2017) S. Beretta et al. INTERNATIONAL JOURNAL OF FATIGUE
- A three-dimensional numerical simulation model for weld characteristics analysis in fiber laser keyhole welding
- (2017) Yuewei Ai et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy
- (2017) Mujian Xia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Flow behavior of powder particles in layering process of selective laser melting: Numerical modeling and experimental verification based on discrete element method
- (2017) Hui Chen et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Using Laser Ultrasound to Detect Subsurface Defects in Metal Laser Powder Bed Fusion Components
- (2017) Sarah Everton et al. JOM
- Influence of Postbuild Microstructure on the Electrochemical Behavior of Additively Manufactured 17-4 PH Stainless Steel
- (2017) M. R. Stoudt et al. JOM
- Review of the Methods for Production of Spherical Ti and Ti Alloy Powder
- (2017) Pei Sun et al. JOM
- Anisotropic Mechanical Behavior of AlSi10Mg Parts Produced by Selective Laser Melting
- (2017) Ming Tang et al. JOM
- Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
- (2017) Ross Cunningham et al. JOM
- Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification
- (2017) Mohsen Seifi et al. JOM
- Prediction of mechanical performance of Ti6Al4V cast alloy based on microCT-based load simulation
- (2017) Anton du Plessis et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing
- (2017) Y.L. Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Grain refinement of wire arc additively manufactured titanium by the addition of silicon
- (2017) S. Mereddy et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Measurement and correlation of isobaric vapour-liquid equilibria for binary systems of 1-(methoxymethoxy)-2-methyl-propane with 1-butanol and isobutanol at 101.33 kPa
- (2017) Yu-He Song et al. JOURNAL OF CHEMICAL THERMODYNAMICS
- Experimental determination of influencing factors on the humping phenomenon during laser micro welding of thin metal sheets
- (2017) Michael Seiler et al. JOURNAL OF LASER APPLICATIONS
- Analysis of laser–melt pool–powder bed interaction during the selective laser melting of a stainless steel
- (2017) Valérie Gunenthiram et al. JOURNAL OF LASER APPLICATIONS
- Influence of Powder Characteristics on Formation of Porosity in Additive Manufacturing of Ti-6Al-4V Components
- (2017) Maurizio Iebba et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Modeling of Powder Bed Manufacturing Defects
- (2017) H.-W. Mindt et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Selective laser melting of TiB 2 /H13 steel nanocomposites: Influence of hot isostatic pressing post-treatment
- (2017) Bandar AlMangour et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)
- (2017) R. Rashid et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Roughness modeling of AlSi10Mg parts fabricated by selective laser melting
- (2017) Alberto Boschetto et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Direction and location dependency of selective laser melted AlSi10Mg specimens
- (2017) Leonhard Hitzler et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of AlSi10Mg: Effects of scan direction, part placement and inert gas flow velocity on tensile strength
- (2017) Ahmad Bin Anwar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)
- (2017) Bartłomiej Wysocki et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
- (2017) E. Liverani et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting
- (2017) G. Sander et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy
- (2017) Nianwei Dai et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot-isostatic pressing, and casting
- (2017) K. Geenen et al. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
- Effect of surface roughness on corrosion fatigue performance of AlSi10Mg alloy produced by Selective Laser Melting (SLM)
- (2017) Avi Leon et al. MATERIALS CHARACTERIZATION
- Comparison on mechanical anisotropies of selective laser melted Ti-6Al-4V alloy and 304 stainless steel
- (2017) Hanchen Yu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing
- (2017) O.G. Rivera et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V
- (2017) Haider Ali et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
- (2017) Mang Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
- (2017) Naor Elad Uzan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Integral method of preparation and fabrication of metal matrix composite: Selective laser melting of in-situ nano/submicro-sized carbides reinforced iron matrix composites
- (2017) Bo Song et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and composition homogeneity, tensile property, and underlying thermal physical mechanism of selective laser melting tool steel parts
- (2017) Hongyu Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic mechanical properties of EBM manufactured Inconel 718 and effects of post heat treatments
- (2017) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
- (2017) Wakshum M. Tucho et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder
- (2017) Hamed Asgari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Process defects andin situmonitoring methods in metal powder bed fusion: a review
- (2017) Marco Grasso et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
- (2017) Jingjing Yang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing
- (2017) Eric A. Lass et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Application of Serial Sectioning Microscopy to Additively Manufactured Metallic Samples
- (2017) Michael Chapman et al. MICROSCOPY AND MICROANALYSIS
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Additively manufactured hierarchical stainless steels with high strength and ductility
- (2017) Y. Morris Wang et al. NATURE MATERIALS
- Discrete element simulation and experimental study of powder spreading process in additive manufacturing
- (2017) S. Haeri et al. POWDER TECHNOLOGY
- Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel
- (2017) Mohamad Mahmoudi et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
- (2017) Qi Chao et al. SCRIPTA MATERIALIA
- Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
- (2017) Hu Zhang et al. SCRIPTA MATERIALIA
- Mitigation of thermal distortion during additive manufacturing
- (2017) T. Mukherjee et al. SCRIPTA MATERIALIA
- In situ investigation of phase transformations in Ti-6Al-4V under additive manufacturing conditions combining laser melting and high-speed micro-X-ray diffraction
- (2017) C. Kenel et al. Scientific Reports
- The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
- (2017) S. Tammas-Williams et al. Scientific Reports
- Corrosion Properties of Powder Bed Fusion Additively Manufactured 17-4 PH Stainless Steel
- (2017) Rebecca F. Schaller et al. CORROSION
- Process monitoring and inspection systems in metal additive manufacturing: Status and applications
- (2017) Zhong Yang Chua et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- A Summary of Corrosion Properties of Al-Rich Solid Solution and Secondary Phase Particles in Al Alloys
- (2017) Jichao Li et al. Metals
- Material issues in additive manufacturing: A review
- (2017) Sunpreet Singh et al. Journal of Manufacturing Processes
- Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V
- (2017) Ross Cunningham et al. Materials Research Letters
- Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
- (2017) A.B. Spierings et al. MATERIALS & DESIGN
- Laser additive manufacturing of iron aluminides strengthened by ordering, borides or coherent Heusler phase
- (2017) Alena Michalcová et al. MATERIALS & DESIGN
- Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode
- (2017) Ting Qi et al. MATERIALS & DESIGN
- Two-dimensional simulation of grain structure growth within selective laser melted AA-2024
- (2017) Omar Lopez-Botello et al. MATERIALS & DESIGN
- In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
- (2017) Umberto Scipioni Bertoli et al. MATERIALS & DESIGN
- Effect of scan pattern on the microstructure and mechanical properties of Powder Bed Fusion additive manufactured 17-4 stainless steel
- (2017) Andelle Kudzal et al. MATERIALS & DESIGN
- Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions
- (2017) Zhuqing Wang et al. MATERIALS & DESIGN
- Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing
- (2017) Hui Xiao et al. MATERIALS & DESIGN
- Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Spatter formation in selective laser melting process using multi-laser technology
- (2017) Mohsen Taheri Andani et al. MATERIALS & DESIGN
- A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion
- (2017) Patcharapit Promoppatum et al. Engineering
- Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing
- (2017) J. Raplee et al. Scientific Reports
- Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
- (2017) Sonny Ly et al. Scientific Reports
- Microstructure and strength of selectively laser melted AlSi10Mg
- (2016) J. Wu et al. ACTA MATERIALIA
- Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
- (2016) Y.J. Liu et al. ACTA MATERIALIA
- Effect of substrate orientation on the formation of equiaxed stray grains in laser surface remelted single crystal superalloys: Experimental investigation
- (2016) L. Wang et al. ACTA MATERIALIA
- Denudation of metal powder layers in laser powder bed fusion processes
- (2016) Manyalibo J. Matthews et al. ACTA MATERIALIA
- Origin of grain orientation during solidification of an aluminum alloy
- (2016) H.L. Wei et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
- (2016) Saad A. Khairallah et al. ACTA MATERIALIA
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- Discrete element modeling of particle-based additive manufacturing processes
- (2016) John C. Steuben et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Effect of Temperature on the Localized Corrosion of AA2024-T3 and the Electrochemistry of Intermetallic Compounds During Exposure to a Dilute NaCl Solution
- (2016) Jichao Li et al. CORROSION
- Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
- (2016) Nianwei Dai et al. CORROSION SCIENCE
- Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy
- (2016) M. Cabrini et al. ELECTROCHIMICA ACTA
- Analytical modelling of residual stress in additive manufacturing
- (2016) O Fergani et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Sensitivity analysis of material and process parameters in finite element modeling of selective laser melting of Inconel 625
- (2016) Luis E. Criales et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718
- (2016) Sean Gribbin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Long fatigue crack growth in Inconel 718 produced by selective laser melting
- (2016) R. Konečná et al. INTERNATIONAL JOURNAL OF FATIGUE
- Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research
- (2016) P. Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue crack growth behavior and microstructural mechanisms in Ti-6Al-4V manufactured by laser engineered net shaping
- (2016) Yuwei Zhai et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of metallic components by selective electron beam melting — a review
- (2016) C. Körner INTERNATIONAL MATERIALS REVIEWS
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Effects of Powder Attributes and Laser Powder Bed Fusion (L-PBF) Process Conditions on the Densification and Mechanical Properties of 17-4 PH Stainless Steel
- (2016) Harish Irrinki et al. JOM
- Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography
- (2016) Ross Cunningham et al. JOM
- Time-Resolved In Situ Measurements During Rapid Alloy Solidification: Experimental Insight for Additive Manufacturing
- (2016) Joseph T. McKeown et al. JOM
- Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
- (2016) Jason R. Trelewicz et al. JOM
- Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser-Deposited Inconel 718
- (2016) Alex S. Johnson et al. JOM
- Overview of Materials Qualification Needs for Metal Additive Manufacturing
- (2016) Mohsen Seifi et al. JOM
- The Influence of As-Built Surface Conditions on Mechanical Properties of Ti-6Al-4V Additively Manufactured by Selective Electron Beam Melting
- (2016) Y. Y. Sun et al. JOM
- Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks
- (2016) Brian L. DeCost et al. JOM
- Rapid Solidification: Selective Laser Melting of AlSi10Mg
- (2016) Ming Tang et al. JOM
- Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling
- (2016) Yuan Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigations of welding instabilities and weld seam formation during laser microwelding of ultrathin metal sheets
- (2016) Michael Seiler et al. JOURNAL OF LASER APPLICATIONS
- Simulation of Forming Process of Powder Bed for Additive Manufacturing
- (2016) Zhaowei Xiang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Simulating Melt Pool Shape and Lack of Fusion Porosity for Selective Laser Melting of Cobalt Chromium Components
- (2016) Chong Teng et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Changing the alloy composition of Al7075 for better processability by selective laser melting
- (2016) Maria L. Montero-Sistiaga et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Evaluation of corrosion resistance of Al–10Si–Mg alloy obtained by means of Direct Metal Laser Sintering
- (2016) Marina Cabrini et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Finite-element analysis and experimental validation of thermal residual stress and distortion in electron beam additive manufactured Ti-6Al-4V build plates
- (2016) Jun Cao et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- On the formation of AlSi10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties
- (2016) Nesma T. Aboulkhair et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In situ morphology-based defect detection of selective laser melting through inline coherent imaging
- (2016) Jordan A. Kanko et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Grain morphology control and texture characterization of laser solid formed Ti6Al2Sn2Zr3Mo1.5Cr2Nb titanium alloy
- (2016) Q. Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting
- (2016) R. Casati et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Local Corrosion Behavior of Additive Manufactured AlSiMg Alloy Assessed by SEM and SKPFM
- (2016) Reynier I. Revilla et al. JOURNAL OF THE ELECTROCHEMICAL SOCIETY
- Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment
- (2016) V.D. Divya et al. MATERIALS CHARACTERIZATION
- Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718
- (2016) Derek H. Smith et al. MATERIALS CHARACTERIZATION
- Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
- (2016) I. Maskery et al. MATERIALS CHARACTERIZATION
- Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting
- (2016) Tanja Trosch et al. MATERIALS LETTERS
- In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders
- (2016) M. Fischer et al. Materials Science & Engineering C-Materials for Biological Applications
- Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
- (2016) Amanda J. Sterling et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
- (2016) M.E. Aydinöz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Damage evolution and failure mechanisms in additively manufactured stainless steel
- (2016) Holly D. Carlton et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure evolutions and nucleation mechanisms of dynamic recrystallization of a powder metallurgy Ni-based superalloy during hot compression
- (2016) Guoai He et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material
- (2016) Arne Röttger et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain structure evolution in Inconel 718 during selective electron beam melting
- (2016) H. Helmer et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties
- (2016) Hu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
- (2016) Nesma T. Aboulkhair et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting
- (2016) G. Miranda et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of additive manufactured, powder-bed laser-fused materials
- (2016) Todd M. Mower et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V
- (2016) D. Greitemeier et al. MATERIALS SCIENCE AND TECHNOLOGY
- X-ray computed tomography for additive manufacturing: a review
- (2016) A Thompson et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Correlation of Thermally Induced Pores with Microstructural Features Using High Energy X-rays
- (2016) David B. Menasche et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Process Optimization of Dual-Laser Beam Welding of Advanced Al-Li Alloys Through Hot Cracking Susceptibility Modeling
- (2016) Yingtao Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
- (2016) Markus Ramsperger et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting
- (2016) Samuel Tammas-Williams et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Particle-based simulation of powder application in additive manufacturing
- (2016) Eric J.R. Parteli et al. POWDER TECHNOLOGY
- Surface texture metrology for metal additive manufacturing: a review
- (2016) A. Townsend et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Direct laser deposition of Ti-6Al-4V from elemental powder blends
- (2016) Lei Yan et al. RAPID PROTOTYPING JOURNAL
- Utilization of a microstructure sensitive fatigue model for additively manufactured Ti-6Al-4V
- (2016) Brian Torries et al. RAPID PROTOTYPING JOURNAL
- Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components
- (2016) S. Tammas-Williams et al. SCRIPTA MATERIALIA
- Corrosion resistance of direct metal laser sintering AlSiMg alloy
- (2016) M. Cabrini et al. SURFACE AND INTERFACE ANALYSIS
- Fatigue behaviour of selective laser melting steel components
- (2016) L.M.S. Santos et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Effect of Temperature on the Localized Corrosion of AA2024-T3 and the Electrochemistry of Intermetallic Compounds During Exposure to a Dilute NaCl Solution
- (2016) Jichao Li et al. CORROSION
- Synchrotron X-ray CT characterization of titanium parts fabricated by additive manufacturing. Part II. Defects
- (2016) Nicola Vivienne Yorke Scarlett et al. JOURNAL OF SYNCHROTRON RADIATION
- Strength and plasticity of nanolaminated materials
- (2016) Jian Wang et al. Materials Research Letters
- Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
- (2016) Khairul Amilin Ibrahim et al. MATERIALS & DESIGN
- Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
- (2016) Nesma T. Aboulkhair et al. MATERIALS & DESIGN
- 3D imaging and quantification of porosity in electron beam welded dissimilar steel to Fe-Al alloy joints by X-ray tomography
- (2016) Soumitra Kumar Dinda et al. MATERIALS & DESIGN
- Reducing lack of fusion during selective laser melting of CoCrMo alloy: Effect of laser power on geometrical features of tracks
- (2016) K. Darvish et al. MATERIALS & DESIGN
- Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology
- (2016) Alejandro Hinojos et al. MATERIALS & DESIGN
- Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting
- (2016) Xiaoli Zhao et al. MATERIALS & DESIGN
- Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy
- (2016) Jingjing Yang et al. MATERIALS & DESIGN
- Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development
- (2016) U. Tradowsky et al. MATERIALS & DESIGN
- Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718
- (2016) Yuan Chen et al. MATERIALS & DESIGN
- Nanocrystalline TiC-reinforced H13 steel matrix nanocomposites fabricated by selective laser melting
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting
- (2016) H. Schwab et al. MATERIALS & DESIGN
- Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles
- (2016) Michael Cloots et al. MATERIALS & DESIGN
- Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
- (2016) Galina Kasperovich et al. MATERIALS & DESIGN
- A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder
- (2016) Chongliang Zhong et al. MATERIALS & DESIGN
- A novel titanium alloy manufactured by selective laser melting: Microstructure, high temperature oxidation resistance
- (2016) Y. Zhou et al. MATERIALS & DESIGN
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting
- (2016) Takahiro Kimura et al. MATERIALS & DESIGN
- Investigation of dendritic growth and liquation cracking in laser melting deposited Inconel 718 at different laser input angles
- (2016) Yuan Chen et al. MATERIALS & DESIGN
- Printability of alloys for additive manufacturing
- (2016) T. Mukherjee et al. Scientific Reports
- Effect of substrate orientation on the columnar-to-equiaxed transition in laser surface remelted single crystal superalloys
- (2015) L. Wang et al. ACTA MATERIALIA
- On the role of melt flow into the surface structure and porosity development during selective laser melting
- (2015) Chunlei Qiu et al. ACTA MATERIALIA
- A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
- (2015) X.P. Li et al. ACTA MATERIALIA
- A criterion for cracking during solidification
- (2015) Sindo Kou ACTA MATERIALIA
- Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
- (2015) M.J. Bermingham et al. ACTA MATERIALIA
- Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
- (2015) W. Xu et al. ACTA MATERIALIA
- Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
- (2015) Neil J. Harrison et al. ACTA MATERIALIA
- 2015 W.R. Whitney Award Lecture:The Effects of Microstructure and Composition on Al Alloy Corrosion
- (2015) G.S. Frankel CORROSION
- WPD-PCA-Based Laser Welding Process Monitoring and Defects Diagnosis by Using FNN and SVM
- (2015) Deyong You et al. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
- Evaluation of analytical modeling for improvement of surface roughness of FDM test part using measurement results
- (2015) Sadegh Rahmati et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Manipulation and Characterization of a Novel Titanium Powder Precursor for Additive Manufacturing Applications
- (2015) Y. Y. Sun et al. JOM
- Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
- (2015) Allison M. Beese et al. JOM
- Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure
- (2015) Sudha Cheruvathur et al. JOM
- Additive Manufacturing of Al-12Si Alloy Via Pulsed Selective Laser Melting
- (2015) R. Chou et al. JOM
- Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting
- (2015) H. P. Tang et al. JOM
- Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V
- (2015) Mohsen Seifi et al. JOM
- Fabrication of large Ti–6Al–4V structures by direct laser deposition
- (2015) Chunlei Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties
- (2015) Stefan Ziegelmeier et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
- (2015) Christian Weingarten et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
- (2015) Galina Kasperovich et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting
- (2015) Shafaqat Siddique et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Balling phenomena in selective laser melted tungsten
- (2015) Xin Zhou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Build Direction Effects on Microchannel Tolerance and Surface Roughness
- (2015) Jacob C. Snyder et al. JOURNAL OF MECHANICAL DESIGN
- Selective laser sintering of MA956 oxide dispersion strengthened steel
- (2015) Ryan M. Hunt et al. JOURNAL OF NUCLEAR MATERIALS
- The anisotropy of laser melting deposition additive manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy
- (2015) Yanyan Zhu et al. MATERIALS & DESIGN
- Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
- (2015) Noriko Read et al. MATERIALS & DESIGN
- Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel
- (2015) Tyler LeBrun et al. MATERIALS & DESIGN
- The TriBeam system: Femtosecond laser ablation in situ SEM
- (2015) McLean P. Echlin et al. MATERIALS CHARACTERIZATION
- XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting
- (2015) S. Tammas-Williams et al. MATERIALS CHARACTERIZATION
- Process development for the manufacturing of 99.94% pure copper via selective electron beam melting
- (2015) Matthias A. Lodes et al. MATERIALS LETTERS
- Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
- (2015) Craig Brice et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Titanium alloyed with rhenium by selective laser melting
- (2015) Edward Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
- (2015) Aref Yadollahi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
- (2015) Dongyun Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting
- (2015) H.P. Tang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of porous commercially pure Ti and Ti–TiB composite materials manufactured by selective laser melting
- (2015) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hardened austenite steel with columnar sub-grain structure formed by laser melting
- (2015) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
- (2015) E. Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V
- (2015) Marco Simonelli et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
- (2015) Nesma T. Aboulkhair et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
- (2015) L. M. Sochalski-Kolbus et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
- (2015) Stefan Leuders et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting
- (2015) Martin Joachim Holzweissig et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Characterization of Nickel Based Superalloys Processed Through Direct Metal Laser Sintering Technique of Additive Manufacturing
- (2015) Yaakov Idell et al. MICROSCOPY AND MICROANALYSIS
- Rheological behavior of β-Ti and NiTi powders produced by atomization for SLM production of open porous orthopedic implants
- (2015) G. Yablokova et al. POWDER TECHNOLOGY
- The present and future of additive manufacturing in the aerospace sector: A review of important aspects
- (2015) Adrián Uriondo et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING
- A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
- (2015) E.O. Olakanmi et al. PROGRESS IN MATERIALS SCIENCE
- On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting
- (2015) C. Panwisawas et al. SCRIPTA MATERIALIA
- MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DIRECT METAL LASER SINTERED TI-6AL-4V
- (2015) Thorsten Hermann Becker et al. South African Journal of Industrial Engineering
- The macromolecular crystallography beamlines at BESSY II of the Helmholtz-Zentrum Berlin: Current status and perspectives
- (2015) Uwe Mueller et al. European Physical Journal Plus
- MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DIRECT METAL LASER SINTERED TI-6AL-4V
- (2015) Thorsten Hermann Becker et al. South African Journal of Industrial Engineering
- Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
- (2015) W. E. King et al. Applied Physics Reviews
- 2015 W.R. Whitney Award Lecture:The Effects of Microstructure and Composition on Al Alloy Corrosion
- (2015) G.S. Frankel CORROSION
- Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting
- (2015) Haijun Gong et al. MATERIALS & DESIGN
- Functionalization of Ti6Al4V scaffolds produced by direct metal laser for biomedical applications
- (2015) Juan J. de Damborenea et al. MATERIALS & DESIGN
- Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder
- (2015) Yang Liu et al. MATERIALS & DESIGN
- Computed tomography for characterization of fatigue performance of selective laser melted parts
- (2015) Shafaqat Siddique et al. MATERIALS & DESIGN
- The influence of heat accumulation on the surface roughness in powder-bed additive manufacturing
- (2015) Mahdi Jamshidinia et al. Surface Topography-Metrology and Properties
- Surface texture measurement for additive manufacturing
- (2015) Andrew Triantaphyllou et al. Surface Topography-Metrology and Properties
- Surface topography and the impact on fatigue performance
- (2015) D T Ardi et al. Surface Topography-Metrology and Properties
- Characterization of typical surface effects in additive manufacturing with confocal microscopy
- (2015) Tobias Grimm et al. Surface Topography-Metrology and Properties
- Characterization and analysis of surface notches on Ti-alloy plates fabricated by additive manufacturing techniques
- (2015) Kwai S Chan Surface Topography-Metrology and Properties
- Analysis and correction of defects within parts fabricated using powder bed fusion technology
- (2015) Jorge Mireles et al. Surface Topography-Metrology and Properties
- Dynamic compressive behaviour of Ti-6Al-4V alloy processed by electron beam melting under high strain rate loading
- (2015) A. Mohammadhosseini et al. Advances in Manufacturing
- Processing window and evaporation phenomena for Ti–6Al–4V produced by selective electron beam melting
- (2014) V. Juechter et al. ACTA MATERIALIA
- Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
- (2014) B. Vrancken et al. ACTA MATERIALIA
- Relationship between spatter formation and dynamic molten pool during high-power deep-penetration laser welding
- (2014) Shichun Li et al. APPLIED SURFACE SCIENCE
- Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology
- (2014) G. Ziółkowski et al. Archives of Civil and Mechanical Engineering
- Chemical polishing of scaffolds made of Ti–6Al–7Nb alloy by additive manufacturing
- (2014) E. Łyczkowska et al. Archives of Civil and Mechanical Engineering
- Implementation of a thermomechanical model for the simulation of selective laser melting
- (2014) N. E. Hodge et al. COMPUTATIONAL MECHANICS
- Prediction of short fatigue crack growth of Ti-6Al-4V
- (2014) K. Wang et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Modeling metal deposition in heat transfer analyses of additive manufacturing processes
- (2014) Panagiotis Michaleris FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Selective electron beam melting of Ti–48Al–2Nb–2Cr: Microstructure and aluminium loss
- (2014) Jan Schwerdtfeger et al. INTERMETALLICS
- The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
- (2014) Luke N. Carter et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Heat transfer and material flow during laser assisted multi-layer additive manufacturing
- (2014) V. Manvatkar et al. JOURNAL OF APPLIED PHYSICS
- A complete model of keyhole and melt pool dynamics to analyze instabilities and collapse during laser welding
- (2014) Mickael Courtois et al. JOURNAL OF LASER APPLICATIONS
- On Process Temperature in Powder-Bed Electron Beam Additive Manufacturing: Model Development and Validation
- (2014) Bo Cheng et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Selective Laser Melting of Crack-Free High Density M2 High Speed Steel Parts by Baseplate Preheating
- (2014) Karolien Kempen et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
- (2014) Gustavo Tapia et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
- (2014) Wayne E. King et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mesoscopic simulation model of selective laser melting of stainless steel powder
- (2014) Saad A. Khairallah et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Defect generation and propagation mechanism during additive manufacturing by selective beam melting
- (2014) A. Bauereiß et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization of microstructure and residual stress in a 3D H13 tool steel component produced by additive manufacturing
- (2014) Ryan Cottam et al. JOURNAL OF MATERIALS RESEARCH
- Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
- (2014) William J. Sames et al. JOURNAL OF MATERIALS RESEARCH
- Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure
- (2014) Harald Ernst Helmer et al. JOURNAL OF MATERIALS RESEARCH
- Analysis of multi-phase interaction and its effects on keyhole dynamics with a multi-physics numerical model
- (2014) Wenda Tan et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods
- (2014) Alexander Klassen et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Fatigue performance evaluation of selective laser melted Ti–6Al–4V
- (2014) P. Edwards et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
- (2014) X.J. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
- (2014) M. Simonelli et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Site specific control of crystallographic grain orientation through electron beam additive manufacturing
- (2014) R. R. Dehoff et al. MATERIALS SCIENCE AND TECHNOLOGY
- Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory
- (2014) W. King et al. MATERIALS SCIENCE AND TECHNOLOGY
- An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
- (2014) Amanda S. Wu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Selective laser melting additive manufactured Inconel 718 superalloy parts: High-temperature oxidation property and its mechanisms
- (2014) Qingbo Jia et al. OPTICS AND LASER TECHNOLOGY
- Characterization of Metal Powders Used for Additive Manufacturing
- (2014) J. A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
- (2014) John A. Slotwinski et al. JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
- Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
- (2013) L.E. Murr et al. ACTA MATERIALIA
- Oxide films in laser additive manufactured Inconel 718
- (2013) Y.N. Zhang et al. ACTA MATERIALIA
- Observation of spatter formation mechanisms in high-power fiber laser welding of thick plate
- (2013) M.J. Zhang et al. APPLIED SURFACE SCIENCE
- A novel method for manufacturing sintered aluminium heat pipes (SAHP)
- (2013) M. Ameli et al. APPLIED THERMAL ENGINEERING
- Effect of heat treatment on microstructure and mechanical properties of the hot-isostatic-pressed Inconel 718 powder compact
- (2013) Litao Chang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
- (2013) Qingbo Jia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
- (2013) Damien Buchbinder et al. JOURNAL OF LASER APPLICATIONS
- Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
- (2013) P. Edwards et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Sliding Wear Characteristics and Corrosion Behaviour of Selective Laser Melted 316L Stainless Steel
- (2013) Y. Sun et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
- (2013) H. K. Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti–6Al–4V powder fractions
- (2013) Joakim Karlsson et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dynamic keyhole profile during high-power deep-penetration laser welding
- (2013) S. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructures and Hardness Properties for β-Phase Ti–24Nb–4Zr–7.9Sn Alloy Fabricated by Electron Beam Melting
- (2013) J. Hernandez et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location
- (2013) Nikolas Hrabe et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment
- (2013) K.G. Prashanth et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Monitoring of high-power laser welding using high-speed photographing and image processing
- (2013) Deyong You et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Melt behavior on the keyhole front during high speed laser welding
- (2013) I. Eriksson et al. OPTICS AND LASERS IN ENGINEERING
- Fatigue performance of additive manufactured metallic parts
- (2013) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- Humping Effect in Welding of Steel with Single-Mode Fibre Laser
- (2013) C. Thomy et al. Welding in the World
- On the mechanism of porosity formation during welding of titanium alloys
- (2012) Jianglin L. Huang et al. ACTA MATERIALIA
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- High-Resolution Microfocus X-Ray Computed Tomography for 3D Surface Roughness Measurements of Additive Manufactured Porous Materials
- (2012) Greet Kerckhofs et al. ADVANCED ENGINEERING MATERIALS
- Photographic study of bubble departure diameter in saturated pool boiling to electrolyte solutions
- (2012) S.M. Peyghambarzadeh et al. Chemical Industry & Chemical Engineering Quarterly
- Influence of process parameters on surface roughness of aluminum parts produced by DMLS
- (2012) F. Calignano et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Material defects as the basis of fatigue design
- (2012) Yukitaka Murakami INTERNATIONAL JOURNAL OF FATIGUE
- The physics of fatigue crack initiation
- (2012) Michael D. Sangid INTERNATIONAL JOURNAL OF FATIGUE
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Evaluations of cellular lattice structures manufactured using selective laser melting
- (2012) Chunze Yan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
- (2012) Bey Vrancken et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti–6Al–4V alloy
- (2012) Myriam Gharbi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface roughness analysis, modelling and prediction in selective laser melting
- (2012) Giovanni Strano et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
- (2012) Lawrence E. Murr et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Laser deposition and deformation behavior of Ti–Nb–Zr–Ta alloys for orthopedic implants
- (2012) S. Nag et al. Journal of the Mechanical Behavior of Biomedical Materials
- Biocompatibility of Ti-alloys for long-term implantation
- (2012) Mohamed Abdel-Hady Gepreel et al. Journal of the Mechanical Behavior of Biomedical Materials
- Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants
- (2012) Kwai S. Chan et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- NEW FRONTIERS IN THERMAL PLASMAS FROM SPACE TO NANOMATERIALS
- (2012) Maher I. Boulos Nuclear Engineering and Technology
- Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method
- (2012) Jean-Pierre Kruth et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Laser sintering of blended Al‐Si powders
- (2012) Eyitayo Olatunde Olakanmi et al. RAPID PROTOTYPING JOURNAL
- Corrosion mechanism associated with Mg2Si and Si particles in Al–Mg–Si alloys
- (2012) Feng-li ZENG et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Analysis of Fracture Toughness and Crack Propagation of Ti6Al4V Produced by Selective Laser Melting
- (2011) Brecht Van Hooreweder et al. ADVANCED ENGINEERING MATERIALS
- Balling behavior of stainless steel and nickel powder during selective laser melting process
- (2011) Ruidi Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials
- (2011) Jordi Delgado et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
- (2011) Wang Di et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Multiaxial fatigue: An overview and some approximation models for life estimation
- (2011) Ali Fatemi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Spatter in laser welding
- (2011) A. F. H. Kaplan et al. JOURNAL OF LASER APPLICATIONS
- Relationship of laser absorption to keyhole behavior in high power fiber laser welding of stainless steel and aluminum alloy
- (2011) Yousuke Kawahito et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition
- (2011) Bernd Baufeld et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Gas flow effects on selective laser melting (SLM) manufacturing performance
- (2011) B. Ferrar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A simple methodology for predicting laser-weld properties from material and laser parameters
- (2011) D B Hann et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Modelling of keyhole dynamics and porosity formation considering the adaptive keyhole shape and three-phase coupling during deep-penetration laser welding
- (2011) Haiyan Zhao et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
- (2011) Edward Chlebus et al. MATERIALS CHARACTERIZATION
- Direct Laser Fabrication of Ti-25V-15Cr-2Al-0.2C (wt pct) Burn-Resistant Titanium Alloy
- (2011) Fude Wang METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
- (2011) L. E. Murr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The conflicts between strength and toughness
- (2011) Robert O. Ritchie NATURE MATERIALS
- Comparison of density measurement techniques for additive manufactured metallic parts
- (2011) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
- (2011) Evren Yasa et al. RAPID PROTOTYPING JOURNAL
- Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
- (2011) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- The effect of oxygen on transitional Marangoni flow in laser spot welding
- (2010) C.X. Zhao et al. ACTA MATERIALIA
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Oxidation of nickel-based single-crystal superalloys for industrial gas turbine applications
- (2010) A. Sato et al. ACTA MATERIALIA
- Metastable Austenite in 17-4 Precipitation-Hardening Stainless Steel Produced by Selective Laser Melting
- (2010) Luca Facchini et al. ADVANCED ENGINEERING MATERIALS
- Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting
- (2010) Ruidi Li et al. APPLIED SURFACE SCIENCE
- Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation
- (2010) S. Biamino et al. INTERMETALLICS
- Microstructure-sensitive computational modeling of fatigue crack formation
- (2010) D.L. McDowell et al. INTERNATIONAL JOURNAL OF FATIGUE
- Advanced gas atomization processing for Ti and Ti alloy powder manufacturing
- (2010) A. J. Heidloff et al. JOM
- Production and corrosion behaviours of the Al–12Si–XMg alloys containing in situ Mg2Si particles
- (2010) H. Ahlatci JOURNAL OF ALLOYS AND COMPOUNDS
- Single track formation in selective laser melting of metal powders
- (2010) I. Yadroitsev et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Mesoscopic simulation of selective beam melting processes
- (2010) Carolin Körner et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of aluminium components
- (2010) Eleftherios Louvis et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Melt pool and keyhole behaviour analysis for deep penetration laser welding
- (2010) R Fabbro JOURNAL OF PHYSICS D-APPLIED PHYSICS
- A three-dimensional sharp interface model for self-consistent keyhole and weld pool dynamics in deep penetration laser welding
- (2010) Shengyong Pang et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Residual stresses in laser direct metal deposited Waspaloy
- (2010) R.J. Moat et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture and Crystal Orientation in Ti-6Al-4V Builds Fabricated by Shaped Metal Deposition
- (2010) Bernd Baufeld et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
- (2010) S. S. Al-Bermani et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys
- (2010) Johann Kastner et al. NDT & E INTERNATIONAL
- Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
- (2010) Luca Facchini et al. RAPID PROTOTYPING JOURNAL
- Revealing the relationship between grain size and corrosion rate of metals
- (2010) K.D. Ralston et al. SCRIPTA MATERIALIA
- The Significance of Crack Initiation Stage in Very High Cycle Fatigue of Steels
- (2010) V. Kazymyrovych et al. STEEL RESEARCH INTERNATIONAL
- Application of direct laser metal tooling for AISI H13 tool steel
- (2010) Jae-Ho LEE et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- A mechanism governing oxidation-assisted low-cycle fatigue of superalloys
- (2009) A.G. Evans et al. ACTA MATERIALIA
- Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams
- (2009) Jicheng Gong et al. ACTA MATERIALIA
- A pragmatic model for selective laser melting with evaporation
- (2009) F. Verhaeghe et al. ACTA MATERIALIA
- Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
- (2009) L.E. Murr et al. ACTA MATERIALIA
- Porosity formation and gas bubble retention in laser metal deposition
- (2009) G. K. L. Ng et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat source
- (2009) S. Bag et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Model of Radiation and Heat Transfer in Laser-Powder Interaction Zone at Selective Laser Melting
- (2009) A. V. Gusarov et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Numerical Simulation of Random Packing of Spherical Particles for Powder-Based Additive Manufacturing
- (2009) Jianhua Zhou et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Selective Laser Melting of thin wall parts using pulse shaping
- (2009) K.A. Mumtaz et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
- (2009) Dongdong Gu et al. MATERIALS & DESIGN
- Additive manufacturing of Ti–6Al–4V components by shaped metal deposition: Microstructure and mechanical properties
- (2009) Bernd Baufeld et al. MATERIALS & DESIGN
- The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminium alloy
- (2009) F. Malek Ghaini et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanisms for Solidification Crack Initiation and Growth in Aluminum Welding
- (2009) N. Coniglio et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental–numerical investigation
- (2009) Masoud Alimardani et al. OPTICS AND LASERS IN ENGINEERING
- Microstructure and mechanical properties of Ti‐6Al‐4V produced by electron beam melting of pre‐alloyed powders
- (2009) Luca Facchini et al. RAPID PROTOTYPING JOURNAL
- Top surface and side roughness of Inconel 625 parts processed using selective laser melting
- (2009) Kamran Mumtaz et al. RAPID PROTOTYPING JOURNAL
- Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scales
- (2008) F. Bridier et al. ACTA MATERIALIA
- Recent advances in X-ray microtomography applied to materials
- (2008) S. R. Stock INTERNATIONAL MATERIALS REVIEWS
- Grain-refinement mechanisms in titanium alloys
- (2008) M.J. Bermingham et al. JOURNAL OF MATERIALS RESEARCH
- Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
- (2008) L.E. Murr et al. Journal of the Mechanical Behavior of Biomedical Materials
- Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V
- (2008) L.E. Murr et al. MATERIALS CHARACTERIZATION
- Effect of microstructure on ultra-high cycle fatigue behavior of Ti–6Al–4V
- (2007) J.H. Zuo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A novel “sandwich” method for observation of the keyhole in deep penetration laser welding
- (2007) Yi Zhang et al. OPTICS AND LASERS IN ENGINEERING
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now