Influence of MoS2 based nanofluid-MQL on tribological and machining characteristics in turning of AA 2024 T3 aluminum alloy

Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: A review and future prospect

(2021) Danil Yu. Pimenov et al.   Journal of Materials Research and Technology-JMR&T

Effects of mono/hybrid nanofluid strategies and surfactants on machining performance in the drilling of Hastelloy X

(2021) Emine Şirin et al.   TRIBOLOGY INTERNATIONAL

A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process

(2021) Munish Kumar Gupta et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Influence of duplex jets MQL and nano-MQL cooling system on machining performance of Nimonic 80A

(2021) Mehmet Erdi Korkmaz et al.   Journal of Manufacturing Processes

Influence of hybrid Cryo-MQL lubri-cooling strategy on the machining and tribological characteristics of Inconel 718

(2021) Mohd Danish et al.   TRIBOLOGY INTERNATIONAL

Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL

(2020) Çağrı Vakkas Yıldırım et al.   Journal of Materials Research and Technology-JMR&T

Progress for sustainability in the mist assisted cooling techniques: a critical review

(2020) Gurraj Singh et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel

(2020) Oğuzhan Öndin et al.   TRIBOLOGY INTERNATIONAL

Influence of cryogenic treatment on mechanical performance of friction stir Al-Zn-Cu alloy weldments

(2020) Anuj Bansal et al.   Journal of Manufacturing Processes

Evaluation of tool temperature distribution in MQL drilling of aluminum 2024-T351

(2020) Zhaoju Zhu et al.   Journal of Manufacturing Processes

Performance evaluation of MQL with AL2O3 mixed nanofluids prepared at different concentrations in milling of Hastelloy C276 alloy

(2020) Fatih Günan et al.   Journal of Materials Research and Technology-JMR&T

Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti–6Al–4V alloy

(2020) Munish Kumar Gupta et al.   TRIBOLOGY INTERNATIONAL

Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL

(2020) Şenol Şirin et al.   TRIBOLOGY INTERNATIONAL

Metrological analysis of surface quality aspects in minimum quantity cooling lubrication

(2020) R.W. Maruda et al.   MEASUREMENT

Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review

(2020) Murat Sarikaya et al.   Journal of Manufacturing Processes

Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant

(2020) Teng Gao et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics

(2019) Min Yang et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions

(2019) Min Yang et al.   CERAMICS INTERNATIONAL

Ecological trends in machining as a key factor in sustainable production – A review

(2019) G.M. Krolczyk et al.   JOURNAL OF CLEANER PRODUCTION

Tribological properties under the grinding wheel and workpiece interface by using graphene nanofluid lubricant

(2019) Xin Cui et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625

(2019) Çağrı Vakkas Yıldırım et al.   TRIBOLOGY INTERNATIONAL

Analysis of Secondary Adhesion Wear Mechanism on Hard Machining of Titanium Aerospace Alloy

(2019) Moises Batista Ponce et al.   Materials

Performance Evaluation of MQCL Hard Milling of SKD 11 Tool Steel Using MoS2 Nanofluid

(2019) Pham Quang Dong et al.   Metals

A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids

(2019) Zafar Said et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Analysis and optimization of surface quality while machining high strength aluminium alloy

(2019) G.C. Manjunath Patel et al.   MEASUREMENT

Performance evaluation of vegetable oil based nano cutting fluids in machining using grey relational analysis-A step towards sustainable manufacturing

(2018) Padmini Rapeti et al.   JOURNAL OF CLEANER PRODUCTION

Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions

(2018) G.M. Krolczyk et al.   MEASUREMENT

Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy

(2017) Shuming Guo et al.   JOURNAL OF CLEANER PRODUCTION

Dry cutting effect in turning of a duplex stainless steel as a key factor in clean production

(2017) G.M. Krolczyk et al.   JOURNAL OF CLEANER PRODUCTION

Measurement and prediction of cutting temperatures during dry milling: review and discussions

(2017) N. L. Bhirud et al.   Journal of the Brazilian Society of Mechanical Sciences and Engineering

Effect of TiO 2 nanoparticles on wettability and tribological performance of aqueous suspension

(2017) Linghui Kong et al.   WEAR

Preparation, characterization and tribological mechanism of nanofluids

(2017) Linghui Kong et al.   RSC Advances

Analysis of cutting parameters and cooling/lubrication methods for sustainable machining in turning of Haynes 25 superalloy

(2016) Murat Sarıkaya et al.   JOURNAL OF CLEANER PRODUCTION

The effect of application of cutting fluid with solid lubricant in suspension during cutting of Ti-6Al-4V alloy

(2015) Ricardo R. Moura et al.   WEAR

Evaluation of ionic liquids as lubricants in micro milling – process capability and sustainability

(2014) Minh-Quan Pham et al.   JOURNAL OF CLEANER PRODUCTION

Experimental verification of nanoparticle jet minimum quantity lubrication effectiveness in grinding

(2014) Dongzhou Jia et al.   JOURNAL OF NANOPARTICLE RESEARCH

An investigation on surface grinding of hardened stainless steel S34700 and aluminum alloy AA6061 using minimum quantity of lubrication (MQL) technique

(2013) Mohammadjafar Hadad et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy

(2013) Bizhan Rahmati et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining

(2013) Bizhan Rahmati et al.   JOURNAL OF CLEANER PRODUCTION

Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system

(2013) Mohd Sayuti et al.   JOURNAL OF CLEANER PRODUCTION

Detailed analysis of microstructure of intentionally formed built-up edges for improving wear behaviour in dry metal cutting process of steel

(2013) Johannes Kümmel et al.   WEAR

Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys

(2012) A. Gómez-Parra et al.   WEAR

SEM and EDS Characterisation of Layering TiOxGrowth onto the Cutting Tool Surface in Hard Drilling Processes of Ti-Al-V Alloys

(2011) M. Álvarez et al.   Advances in Materials Science and Engineering

Tool life and wear mechanism when machining Hastelloy C-22HS

(2010) K. Kadirgama et al.   WEAR

Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718

(2009) Abhay Bhatt et al.   TRIBOLOGY INTERNATIONAL