Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review
Published 2020 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review
Authors
Keywords
Light-weight alloys, MQL advances, Cryogenic cooling, Economic sustainability, Environmental sustainability
Journal
Journal of Manufacturing Processes
Volume 62, Issue -, Pages 179-201
Publisher
Elsevier BV
Online
2020-12-28
DOI
10.1016/j.jmapro.2020.12.013
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- A review on recent development of minimum quantity lubrication for sustainable machining
- (2020) N.N. Nor Hamran et al. JOURNAL OF CLEANER PRODUCTION
- Sustainable and Smart Manufacturing: An Integrated Approach
- (2020) Mohamed Abubakr et al. Sustainability
- Progress for sustainability in the mist assisted cooling techniques: a critical review
- (2020) Gurraj Singh et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Sustainability-based performance evaluation of hybrid nanofluid assisted machining
- (2020) Aqib Mashood Khan et al. JOURNAL OF CLEANER PRODUCTION
- Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel
- (2020) Aqib Mashood Khan et al. JOURNAL OF CLEANER PRODUCTION
- Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel
- (2020) Oğuzhan Öndin et al. TRIBOLOGY INTERNATIONAL
- Comprehensive machining analysis to establish cryogenic LN2 and LCO2 as sustainable cooling and lubrication techniques
- (2020) Prassan Shah et al. TRIBOLOGY INTERNATIONAL
- Application of Environmentally-friendly Cooling/Lubrication Strategies for Turning Magnesium/SiC MMCs
- (2020) Navneet Khanna et al. Silicon
- Study on turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles
- (2020) Turgay Kıvak et al. Journal of Manufacturing Processes
- Critical review on ecological, economical and technological aspects of minimum quantity lubrication towards sustainable machining
- (2020) Gurpreet Singh et al. JOURNAL OF CLEANER PRODUCTION
- Energy conservation and environmental sustainability during grinding operation of Ti–6Al–4V alloys via eco-friendly oil/graphene nano additive and Minimum quantity lubrication
- (2020) Ahmed Mohamed Mahmoud Ibrahim et al. TRIBOLOGY INTERNATIONAL
- Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti–6Al–4V alloy
- (2020) Munish Kumar Gupta et al. TRIBOLOGY INTERNATIONAL
- Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL
- (2020) Şenol Şirin et al. TRIBOLOGY INTERNATIONAL
- Recent Advances in the Machining of Titanium Alloys using Minimum Quantity Lubrication (MQL) Based Techniques
- (2019) Salman Pervaiz et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Effect of cryogenic CO2 and LN2 coolants in milling of aluminum alloy
- (2019) M. Jebaraj et al. MATERIALS AND MANUFACTURING PROCESSES
- Parameter optimisation to combine low energy consumption with high surface integrity in turning Mg/Al2O3 hybrid composites under dry and MQL conditions
- (2019) E. Suneesh et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Ecological trends in machining as a key factor in sustainable production – A review
- (2019) G.M. Krolczyk et al. JOURNAL OF CLEANER PRODUCTION
- The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625
- (2019) Çağrı Vakkas Yıldırım et al. TRIBOLOGY INTERNATIONAL
- A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
- (2019) Zafar Said et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy
- (2019) Şenol Şirin et al. TRIBOLOGY INTERNATIONAL
- Sustainable μECM machining process: indicators and assessment
- (2019) Mina Mortazavi et al. JOURNAL OF CLEANER PRODUCTION
- Sustainable Lubrication Methods for the Machining of Titanium Alloys: An Overview
- (2019) Enrique García-Martínez et al. Materials
- Measurement of machining forces and surface roughness in turning of AISI 304 steel using alumina-MWCNT hybrid nanoparticles enriched cutting fluid
- (2019) Anuj Kumar Sharma et al. MEASUREMENT
- Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy
- (2019) Munish Kumar Gupta et al. JOURNAL OF CLEANER PRODUCTION
- Effect of Cryogenic Cooling on the Heat Transfer during Turning of AZ31C Magnesium Alloy
- (2018) Mohd Danish et al. HEAT TRANSFER ENGINEERING
- Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy
- (2018) Mozammel Mia et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of nozzle angle and depth of cut on grinding titanium under cryogenic CO2
- (2018) J. Elanchezhian et al. MATERIALS AND MANUFACTURING PROCESSES
- Measurement and optimization of performance characteristics in turning of Mg alloy under dry and MQL conditions
- (2018) R. Viswanathan et al. MEASUREMENT
- Influence of Ranque-Hilsch vortex tube and nitrogen gas assisted MQL in precision turning of Al 6061-T6
- (2018) Mozammel Mia et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Experimental characterization on eco-friendly micro-grinding process of titanium alloy using air flow assisted electrospray lubrication with nanofluid
- (2018) Pil-Ho Lee et al. JOURNAL OF CLEANER PRODUCTION
- Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy
- (2018) Munish Kumar Gupta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tuning nanofluids for improved lubrication performance in turning biomedical grade titanium alloy
- (2018) Saadman Sakib Rahman et al. JOURNAL OF CLEANER PRODUCTION
- Energy and Cost Integration for Multi-Objective Optimisation in a Sustainable Turning Process
- (2018) Salem Abdullah Bagaber et al. MEASUREMENT
- Developments in nonconventional machining for sustainable production: A state-of-the-art review
- (2018) Kapil Gupta et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique
- (2018) Amiril Sahab Abdul Sani et al. JOURNAL OF CLEANER PRODUCTION
- Energy consumption in machining: Classification, prediction, and reduction strategy
- (2017) G.Y. Zhao et al. ENERGY
- Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions
- (2017) Mohd Danish et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of cutting fluids in machining of titanium alloys—a review
- (2017) Rukmini Srikant Revuru et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
- (2017) B. Boswell et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Dry machining: A step towards sustainable machining – Challenges and future directions
- (2017) Gyanendra Singh Goindi et al. JOURNAL OF CLEANER PRODUCTION
- Application of eco-friendly nanofluids during grinding of Inconel 718 through small quantity lubrication
- (2017) Manoj Kumar Sinha et al. JOURNAL OF CLEANER PRODUCTION
- Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning
- (2017) Rabesh Kumar Singh et al. JOURNAL OF CLEANER PRODUCTION
- Hybrid lubricating/cooling strategies to reduce the tool wear in finishing turning of difficult-to-cut alloys
- (2017) S. Sartori et al. WEAR
- Experimental investigation of flank wear in end milling of aluminum alloy with water-based TiO2 nanofluid lubricant in minimum quantity lubrication technique
- (2016) M. S. Najiha et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An experimental investigation on effect of minimum quantity cooling lubrication (MQCL) in machining titanium alloy (Ti6Al4V)
- (2016) Salman Pervaiz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining of aluminum alloys: a review
- (2016) Mário C. Santos et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304
- (2016) O. Pereira et al. JOURNAL OF CLEANER PRODUCTION
- Performance of water-based TiO 2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6
- (2016) M.S. Najiha et al. JOURNAL OF CLEANER PRODUCTION
- Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques
- (2016) Munish Kumar Gupta et al. JOURNAL OF CLEANER PRODUCTION
- Performance evaluation of aluminium 6063 drilling under the influence of nanofluid minimum quantity lubrication
- (2016) Sukhpal Singh Chatha et al. JOURNAL OF CLEANER PRODUCTION
- A Review of Sustainable Machining Engineering: Optimization Process Through Triple Bottom Line
- (2016) María Estela Peralta Álvarez et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Experimental studies on the cryogenic machining of biodegradable ZK60 Mg alloy using micro-textured tools
- (2016) S. Dinesh et al. MATERIALS AND MANUFACTURING PROCESSES
- Grinding of Ti-6Al-4V Under Small Quantity Cooling Lubrication Environment Using Alumina and MWCNT Nanofluids
- (2016) Sourabh Paul et al. MATERIALS AND MANUFACTURING PROCESSES
- The effect of minimum quantity lubrication in the intermittent turning of magnesium based on vibration signals
- (2016) D. Carou et al. MEASUREMENT
- Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti–6Al–4V titanium alloy
- (2016) Alborz Shokrani et al. Journal of Manufacturing Processes
- Investigations on the thermal workpiece distortion in MQL deep hole drilling of an aluminium cast alloy
- (2015) D. Biermann et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- The Jatropha curcas vegetable base soluble cutting oil as a renewable source in the machining of aluminum alloy 7050-T7451
- (2015) Carlos Alberto Schuch Bork et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- The effect of minimum quantity lubrication under different parameters in the turning of AA7075 and AA2024 aluminium alloys
- (2015) A. Çakır et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy
- (2015) Jules Kouam et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool wear in Ti-6Al-4V alloy turning under oils on water cooling comparing with cryogenic air mixed with minimal quantity lubrication
- (2015) Haisheng Lin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization of process parameters for surface roughness and microhardness in dry milling of magnesium alloy using Taguchi with grey relational analysis
- (2015) Kaining Shi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance evaluation of Ti–6Al–4V grinding using chip formation and coefficient of friction under the influence of nanofluids
- (2015) Dinesh Setti et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V
- (2015) Elisa Vazquez et al. JOURNAL OF CLEANER PRODUCTION
- Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation
- (2015) Yousef Shokoohi et al. JOURNAL OF CLEANER PRODUCTION
- Application of sustainable techniques in metal cutting for enhanced machinability: a review
- (2015) Chetan et al. JOURNAL OF CLEANER PRODUCTION
- The effect of cryogenic cooling and minimum quantity lubrication on end milling of titanium alloy Ti-6Al-4V
- (2015) Kyung-Hee Park et al. Journal of Mechanical Science and Technology
- Grinding titanium Ti-6Al-4V alloy with electroplated cubic boron nitride wheel under cryogenic cooling
- (2015) J. Elanchezhian et al. Journal of Mechanical Science and Technology
- The effect of application of cutting fluid with solid lubricant in suspension during cutting of Ti-6Al-4V alloy
- (2015) Ricardo R. Moura et al. WEAR
- Effect of cryogenic cooling on machinability and surface quality of bio-degradable ZK60 Mg alloy
- (2015) S. Dinesh et al. MATERIALS & DESIGN
- Energy-efficient machining systems: a critical review
- (2014) Tao Peng et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of ionic liquids as lubricants in micro milling – process capability and sustainability
- (2014) Minh-Quan Pham et al. JOURNAL OF CLEANER PRODUCTION
- Environmental friendly cutting fluids and cooling techniques in machining: a review
- (2014) Sujan Debnath et al. JOURNAL OF CLEANER PRODUCTION
- Experimental investigation and optimization of cutting parameters in dry and wet machining of aluminum alloy 5083 in order to remove cutting fluid
- (2014) Behnam Davoodi et al. JOURNAL OF CLEANER PRODUCTION
- Experimental investigation on surface finish during intermittent turning of UNS M11917 magnesium alloy under dry and near dry machining conditions
- (2014) D. Carou et al. MEASUREMENT
- Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions
- (2014) Beril Eker et al. Mechanika
- A statistical analysis applied for optimal cooling system selection and for a superior surface quality of machined magnesium alloy parts
- (2014) Bogdan Chirita et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- An investigation on surface grinding of hardened stainless steel S34700 and aluminum alloy AA6061 using minimum quantity of lubrication (MQL) technique
- (2013) Mohammadjafar Hadad et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of cooling methods on dimensional accuracy and surface finish of a turned titanium part
- (2013) M. N. Islam et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effects of cooling conditions on surface integrity in machining of Ti6Al4V alloy
- (2013) G. Rotella et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Problems and solutions in machining of titanium alloys
- (2013) A. Pramanik INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining
- (2013) Bizhan Rahmati et al. JOURNAL OF CLEANER PRODUCTION
- Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL
- (2013) Murat Sarıkaya et al. JOURNAL OF CLEANER PRODUCTION
- Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
- (2013) Mohd Sayuti et al. JOURNAL OF CLEANER PRODUCTION
- A quantitative approach to analyze carbon emissions of CNC-based machining systems
- (2013) Congbo Li et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Tool life and wear mechanisms in high speed machining of Ti–6Al–4V alloy with PCD tools under various coolant pressures
- (2013) Rosemar B. da Silva et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions
- (2013) Zhiqiang Liu et al. WEAR
- Evaluation of ionic fluids as lubricants in manufacturing
- (2013) A. Libardi et al. Journal of Manufacturing Processes
- Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
- (2012) A. Shokrani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Suppression of Surface Burn in Grinding of Titanium Alloy TC4 Using a Self-inhaling Internal Cooling Wheel
- (2011) Xun LI et al. Chinese Journal of Aeronautics
- Methodology for planning and operating energy-efficient production systems
- (2011) Nils Weinert et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication
- (2011) Jung Soo Nam et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Cutting mechanics in high speed dry machining of biomedical magnesium–calcium alloy using internal state variable plasticity model
- (2011) M. Salahshoor et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V
- (2011) M.J. Bermingham et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental study on turning of TC9 titanium alloy with cold water mist jet cooling
- (2011) Q.L. An et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machining of β-titanium-alloy Ti–10V–2Fe–3Al under cryogenic conditions: Cooling with carbon dioxide snow
- (2011) Christian Machai et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of Cutting Speed on Flank Temperature during Face Milling of Magnesium Alloy
- (2011) Junzhan Hou et al. MATERIALS AND MANUFACTURING PROCESSES
- Sustainable manufacturing: trends and research challenges
- (2011) Marco Garetti et al. PRODUCTION PLANNING & CONTROL
- The role of diamond-like carbon coated drills on minimum quantity lubrication drilling of magnesium alloys
- (2011) S. Bhowmick et al. SURFACE & COATINGS TECHNOLOGY
- Cryogenic turning of the Ti–6Al–4V alloy with modified cutting tool inserts
- (2010) M. Dhananchezian et al. CRYOGENICS
- Machining Ti–6Al–4V alloy with cryogenic compressed air cooling
- (2010) S. Sun et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Dry and minimum quantity lubrication drilling of cast magnesium alloy (AM60)
- (2010) Sukanta Bhowmick et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3
- (2010) Domnita Fratila et al. JOURNAL OF CLEANER PRODUCTION
- Effects of cooling air temperature on cryogenic machining of Ti–6Al–4V alloy
- (2010) S.M. Yuan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of MQL on Surface Roughness in Milling of AA7075-T6
- (2010) Nihat Tosun et al. MATERIALS AND MANUFACTURING PROCESSES
- A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys
- (2010) E.A. Rahim et al. TRIBOLOGY INTERNATIONAL
- Cooling techniques for improved productivity in turning
- (2009) Vishal S. Sharma et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Exergy analysis and performance of a counter flow Ranque–Hilsch vortex tube having various nozzle numbers at different inlet pressures of oxygen and air
- (2009) Volkan Kırmacı INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
- Transitioning to sustainable production – Part I: application on machining technologies
- (2009) Franci Pusavec et al. JOURNAL OF CLEANER PRODUCTION
- Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid
- (2009) M.M.A. Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy
- (2008) M. H. Sadeghi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro-liter lubrication machining of Inconel 718
- (2008) Toshiyuki Obikawa et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Machinability study of pure aluminium and Al–12% Si alloys against uncoated and coated carbide inserts
- (2008) P. Roy et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Enhancement of Wet- and MQL-Based Machining of Automotive Alloys Using Cutting Tools with DLC/Polymer Surface Treatments
- (2008) Julia Dosbaeva et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- The effect of free-machining elements on dry machining of B319 aluminum alloy
- (2008) J.M. Dasch et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Performance of Diamond and CBN Single-Layered Grinding Wheels in Grinding Titanium
- (2008) U. Teicher et al. MATERIALS AND MANUFACTURING PROCESSES
- Wear mechanism map of uncoated HSS tools during drilling die-cast magnesium alloy
- (2008) J. Wang et al. WEAR
- Machining of 6061 aluminium alloy with MQL, dry and flooded lubricant conditions
- (2007) P.S. Sreejith MATERIALS LETTERS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started