The Effects of MQL and Dry Environments on Tool Wear, Cutting Temperature, and Power Consumption during End Milling of AISI 1040 Steel
Published 2021 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
The Effects of MQL and Dry Environments on Tool Wear, Cutting Temperature, and Power Consumption during End Milling of AISI 1040 Steel
Authors
Keywords
-
Journal
Metals
Volume 11, Issue 11, Pages 1674
Publisher
MDPI AG
Online
2021-10-21
DOI
10.3390/met11111674
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites
- (2021) Emine Şap et al. The International Journal of Advanced Manufacturing Technology
- Development of process performance simulator (PPS) and parametric optimization for sustainable machining considering carbon emission, cost and energy aspects
- (2021) A.M. Khan et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Parametric Optimization for Improving the Machining Process of Cu/Mo-SiCP Composites Produced by Powder Metallurgy
- (2021) Emine Şap et al. Materials
- Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy
- (2021) Munish Kumar Gupta et al. TRIBOLOGY INTERNATIONAL
- Tribological Aspects, Optimization and Analysis of Cu-B-CrC Composites Fabricated by Powder Metallurgy
- (2021) Üsame Ali Usca et al. Materials
- Review on design and development of cryogenic machining setups for heat resistant alloys and composites
- (2021) Navneet Khanna et al. Journal of Manufacturing Processes
- Influence of hybrid Cryo-MQL lubri-cooling strategy on the machining and tribological characteristics of Inconel 718
- (2021) Mohd Danish et al. TRIBOLOGY INTERNATIONAL
- ANOVA and fuzzy rule based evaluation and estimation of flank wear, temperature and acoustic emission in turning
- (2021) Mustafa Kuntoğlu et al. CIRP Journal of Manufacturing Science and Technology
- Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL
- (2020) Çağrı Vakkas Yıldırım et al. Journal of Materials Research and Technology-JMR&T
- Optimization and Analysis of Process Parameters for Flank Wear, Cutting Forces and Vibration in Turning of AISI 5140: A Comprehensive Study
- (2020) Abdullah Aslan MEASUREMENT
- Sustainability and machinability improvement of Nimonic-90 using indigenously developed green hybrid machining technology
- (2020) Navneet Khanna et al. JOURNAL OF CLEANER PRODUCTION
- Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel
- (2020) Oğuzhan Öndin et al. TRIBOLOGY INTERNATIONAL
- Comparative analysis of dry, flood, MQL and cryogenic CO2 techniques during the machining of 15-5-PH SS alloy
- (2020) Navneet Khanna et al. TRIBOLOGY INTERNATIONAL
- Evaluation of turning with different cooling-lubricating techniques in terms of surface integrity and tribologic properties
- (2020) Radoslaw W. Maruda et al. TRIBOLOGY INTERNATIONAL
- Multi-objective optimization of MQL mist parameters for eco-friendly grinding
- (2020) Akash Subhash Awale et al. Journal of Manufacturing Processes
- Investigation of signal behaviors for sensor fusion with tool condition monitoring system in turning
- (2020) Mustafa Kuntoğlu et al. MEASUREMENT
- Sustainable milling of Ti–6Al–4V: A trade-off between energy efficiency, carbon emissions and machining characteristics under MQL and cryogenic environment
- (2020) Muhammad Jamil et al. JOURNAL OF CLEANER PRODUCTION
- Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti–6Al–4V alloy
- (2020) Munish Kumar Gupta et al. TRIBOLOGY INTERNATIONAL
- Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL
- (2020) Şenol Şirin et al. TRIBOLOGY INTERNATIONAL
- Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4 V alloy
- (2020) Munish Kumar Gupta et al. Sustainable Materials and Technologies
- Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800
- (2020) Munish Kumar Gupta et al. JOURNAL OF CLEANER PRODUCTION
- Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review
- (2020) Murat Sarikaya et al. Journal of Manufacturing Processes
- Ecological trends in machining as a key factor in sustainable production – A review
- (2019) G.M. Krolczyk et al. JOURNAL OF CLEANER PRODUCTION
- Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
- (2019) Emin Salur et al. COMPOSITES PART B-ENGINEERING
- Investigation of progressive tool wear for determining of optimized machining parameters in turning
- (2019) Mustafa Kuntoğlu et al. MEASUREMENT
- The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625
- (2019) Çağrı Vakkas Yıldırım et al. TRIBOLOGY INTERNATIONAL
- Investigation of Tool Wear and Chip Morphology in Dry Trochoidal Milling of Titanium Alloy Ti–6Al–4V
- (2019) Dongsheng Liu et al. Materials
- Experimental comparison of the performance of nanofluids, cryogenic and hybrid cooling in turning of Inconel 625
- (2019) Çağrı Vakkas Yıldırım TRIBOLOGY INTERNATIONAL
- Effect of Cryogenic Cooling on the Heat Transfer during Turning of AZ31C Magnesium Alloy
- (2018) Mohd Danish et al. HEAT TRANSFER ENGINEERING
- An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions
- (2018) Mozammel Mia et al. JOURNAL OF CLEANER PRODUCTION
- Measurement and optimization of performance characteristics in turning of Mg alloy under dry and MQL conditions
- (2018) R. Viswanathan et al. MEASUREMENT
- Mathematical modeling and optimization of MQL assisted end milling characteristics based on RSM and Taguchi method
- (2018) Mozammel Mia MEASUREMENT
- Machinability Investigations of Inconel-800 Super Alloy under Sustainable Cooling Conditions
- (2018) Munish Gupta et al. Materials
- Energy consumption in machining: Classification, prediction, and reduction strategy
- (2017) G.Y. Zhao et al. ENERGY
- Optimization of MQL flow rate for minimum cutting force and surface roughness in end milling of hardened steel (HRC 40)
- (2016) Mozammel Mia et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Application of nanofluids during minimum quantity lubrication: A case study in turning process
- (2016) Chetan et al. TRIBOLOGY INTERNATIONAL
- Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel
- (2016) R. Padmini et al. TRIBOLOGY INTERNATIONAL
- Performance evaluation of vegetable emulsifier based green cutting fluid in turning of American Iron and Steel Institute (AISI) 1040 steel – an initiative towards sustainable manufacturing
- (2015) R.R. Srikant et al. JOURNAL OF CLEANER PRODUCTION
- Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25
- (2015) Murat Sarıkaya et al. JOURNAL OF CLEANER PRODUCTION
- A Review on Minimum Quantity Lubrication for Machining Processes
- (2014) Vishal S. Sharma et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel
- (2010) P. Vamsi Krishna et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started