Effect of Microstructures of Carbon Nanoproducts Grown on Carbon Fibers on the Interfacial Properties of Epoxy Composites

Grafting of a novel hyperbranched polymer onto carbon fiber for interfacial enhancement of carbon fiber reinforced epoxy composites

(2021) Lina Yang et al.   MATERIALS & DESIGN

Enhanced mechanical properties of carbon fibre/epoxy composites via in situ coating‑carbonisation of micron-sized sucrose particles on the fibre surface

(2021) Nuo Xu et al.   MATERIALS & DESIGN

Enhanced interfacial properties of carbon fiber/epoxy composites by coating carbon nanotubes onto carbon fiber surface by one-step dipping method

(2021) Shu Xiong et al.   APPLIED SURFACE SCIENCE

Growing carbon nanotubes on continuous carbon fibers to produce composites with improved interfacial properties: A step towards commercial production and application

(2021) Jianjie Qin et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Investigation of the parameters of carbon nanotube growth on zirconium diboride supported Ni catalyst via CVD

(2021) Jia Lin et al.   DIAMOND AND RELATED MATERIALS

In situ formation of a carbon nanotube buckypaper for improving the interlaminar properties of carbon fiber composites

(2021) Yadong Wu et al.   MATERIALS & DESIGN

Direct synthesis of carbon nanomaterials via surface activation of bulk copper

(2021) Luiz H. Acauan et al.   CARBON

Impact resistance and interlaminar shear strength enhancement of carbon fiber reinforced thermoplastic composites by introducing MWCNT-anchored carbon fiber

(2021) Jinsil Cheon et al.   COMPOSITES PART B-ENGINEERING

Mussel-tailored carbon fiber/carbon nanotubes interface for elevated interfacial properties of carbon fiber/epoxy composites

(2021) Dongliang Wu et al.   CHEMICAL ENGINEERING JOURNAL

When does nanotube grafting on fibers benefit the strength and toughness of composites?

(2020) Qiang Liu et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Direct growth of carbon nanotubes on basalt fiber for the application of electromagnetic interference shielding

(2020) Chao Chang et al.   CARBON

Effect of ozone-treated single-walled carbon nanotubes on interfacial properties and fracture toughness of carbon fiber-reinforced epoxy composites

(2020) Sang-Jin Park et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Interfacial improvement of carbon fiber/epoxy composites using one-step method for grafting carbon nanotubes on the fibers at ultra-low temperatures

(2020) Zhiqiang Yao et al.   CARBON

Effect of electrophoretic deposition followed by solution pre-impregnated surface modified carbon fiber-carbon nanotubes on the mechanical properties of carbon fiber reinforced polycarbonate composites

(2020) Yadong Wu et al.   COMPOSITES PART B-ENGINEERING

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

(2020) Shaolong Li et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Fracture investigation of functionalized carbon nanotubes-grown carbon fiber fabrics/epoxy composites

(2020) Zhiqiang Yao et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

(2020) Jiming Zhou et al.   CERAMICS INTERNATIONAL

Study on multistage anodization for high‐modulus carbon fiber

(2019) Yingpiao Fu et al.   SURFACE AND INTERFACE ANALYSIS

Mechanical behavior of Graphene decorated carbon fiber reinforced polymer composites: An assessment of the influence of functional groups

(2019) Pavan Kumar Gangineni et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Continuous method for grafting CNTs on the surface of carbon fibers based on cobalt catalyst assisted by thiourea

(2019) Shunsheng Su et al.   JOURNAL OF MATERIALS SCIENCE

Understanding and control of interactions between carbon nanotubes and polymers for manufacturing of high-performance composite materials

(2019) Cécile A.C. Chazot et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Low temperature growth of carbon nanotubes – A review

(2019) Muhammad Ahmad et al.   CARBON

Interfacial reinforcement of hybrid composite by electrophoretic deposition for vertically aligned carbon nanotubes on carbon fiber

(2019) Lizhi Li et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Hierarchical Carbon Nanotube-Coated Carbon Fiber: Ultra Lightweight, Thin, and Highly Efficient Microwave Absorber

(2018) Sandeep Kumar Singh et al.   ACS Applied Materials & Interfaces

Continuous carbon nanotube synthesis on charged carbon fibers

(2018) David B. Anthony et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Chemical vapor deposition-based grafting of CNTs onto basalt fabric and their reinforcement in epoxy-based composites

(2018) Garima Mittal et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Mechanical enhancement effect of the interlayer hybrid CNT film/carbon fiber/epoxy composite

(2018) Tianshu Li et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Synthesis and growth mechanism of carbon nanotubes growing on carbon fiber surfaces with improved tensile strength

(2018) Jianjie Qin et al.   NANOTECHNOLOGY

A CVD Method for Preparing CNTs-Grafted Carbon Fiber Fabrics under Quasi-Vacuum at Low Temperature

(2018) Ruijiao Lu et al.   ECS Journal of Solid State Science and Technology

Enhancing the electrical conductivity of carbon fibre thin-ply laminates with directly grown aligned carbon nanotubes

(2018) M. Russello et al.   COMPOSITE STRUCTURES

Production of carbon nanotubes on bio-char at low temperature via microwave-assisted CVD using Ni catalyst

(2018) Jian Zhang et al.   DIAMOND AND RELATED MATERIALS

Enhancing interfacial properties of carbon fibers reinforced epoxy composites via Layer-by-Layer self assembly GO/SiO2 multilayers films on carbon fibers surface

(2018) Junsong Fu et al.   APPLIED SURFACE SCIENCE

High efficient preparation of carbon nanotube-grafted carbon fibers with the improved tensile strength

(2016) Wenxin Fan et al.   APPLIED SURFACE SCIENCE

Enhanced mechanical properties of multiscale carbon fiber/epoxy composites by fiber surface treatment with graphene oxide/polyhedral oligomeric silsesquioxane

(2016) R.L. Zhang et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Effect of a multiscale reinforcement by carbon fiber surface treatment with graphene oxide/carbon nanotubes on the mechanical properties of reinforced carbon/carbon composites

(2016) Bo Gao et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Low-temperature grafting of carbon nanotubes on carbon fibers using a bimetallic floating catalyst

(2016) Geunsung Lee et al.   DIAMOND AND RELATED MATERIALS

Impact behavior and fractographic study of carbon nanotubes grafted carbon fiber-reinforced epoxy matrix multi-scale hybrid composites

(2015) S.P. Sharma et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Direct growth of carbon nanotubes on carbon fibers: Effect of the CVD parameters on the degradation of mechanical properties of carbon fibers

(2015) Niels De Greef et al.   DIAMOND AND RELATED MATERIALS

Electrophoretic deposition of carbon nanotubes onto carbon fiber felt for production of carbon/carbon composites with improved mechanical and thermal properties

(2014) Ke-zhi Li et al.   VACUUM

Preparation of carbon nanotube/carbon fiber hybrid fiber by combining electrophoretic deposition and sizing process for enhancing interfacial strength in carbon fiber composites

(2013) S. Zhang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Degradation and Healing Mechanisms of Carbon Fibers during the Catalytic Growth of Carbon Nanotubes on Their Surfaces

(2012) Kyoung Ju Kim et al.   ACS Applied Materials & Interfaces

Improved tensile strength of carbon fibers undergoing catalytic growth of carbon nanotubes on their surface

(2012) Kyoung Ju Kim et al.   CARBON

The effect of surface modification with carbon nanotubes upon the tensile strength and Weibull modulus of carbon fibers

(2012) Kimiyoshi Naito et al.   JOURNAL OF MATERIALS SCIENCE

Preparation of vertically aligned carbon nanotube arrays grown onto carbon fiber fabric and evaluating its wettability on effect of composite

(2011) Feng An et al.   APPLIED SURFACE SCIENCE

Growth of carbon nanotube forests on carbon fibers with an amorphous silicon interface

(2010) Valdirene Gonzaga de Resende et al.   CARBON

Carbon nanotube grafted carbon fibres: A study of wetting and fibre fragmentation

(2010) Hui Qian et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Growth of carbon nanotubes on carbon fibre substrates to produce hybrid/phenolic composites with improved mechanical properties

(2008) R.B. Mathur et al.   COMPOSITES SCIENCE AND TECHNOLOGY