- Home
- Publications
- Publication Search
- Publication Details
Title
Laser additive manufacturing of steels
Authors
Keywords
-
Journal
INTERNATIONAL MATERIALS REVIEWS
Volume -, Issue -, Pages 1-87
Publisher
Informa UK Limited
Online
2021-10-21
DOI
10.1080/09506608.2021.1983351
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Grain refinement in additively manufactured ferritic stainless steel by in situ inoculation using pre-alloyed powder
- (2021) A. Durga et al. SCRIPTA MATERIALIA
- Effects of crack orientation and heat treatment on fatigue-crack-growth behavior of AM 17-4 PH stainless steel
- (2020) Aref Yadollahi et al. ENGINEERING FRACTURE MECHANICS
- Advances in additive manufacturing of metal-based functionally graded materials
- (2020) Ashley Reichardt et al. INTERNATIONAL MATERIALS REVIEWS
- A trade-off between powder layer thickness and mechanical properties in additively manufactured maraging steels
- (2020) SeyedAmirReza Shamsdini et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain structure control during metal 3D printing by high-intensity ultrasound
- (2020) C. J. Todaro et al. Nature Communications
- Thermal Fatigue Properties of H13 Hot-Work Tool Steels Processed by Selective Laser Melting
- (2020) Mei Wang et al. Metals
- A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles
- (2020) Qiyang Tan et al. Additive Manufacturing
- Microstructure and properties of hybrid additive manufacturing 316L component by directed energy deposition and laser remelting
- (2020) Xiao-hui Chen et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: Effect of sub-surface porosity and surface roughness
- (2020) Simone Romano et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L
- (2020) K.M. Bertsch et al. ACTA MATERIALIA
- High-strength Damascus steel by additive manufacturing
- (2020) Philipp Kürnsteiner et al. NATURE
- On the feasibility of AISI 304 stainless steel laser welding with metal powder
- (2020) V. Errico et al. Journal of Manufacturing Processes
- Additive manufacturing of the ferritic stainless steel SS441
- (2020) Dennis Karlsson et al. Additive Manufacturing
- Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy
- (2020) Qiyang Tan et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- About metastable cellular structure in additively manufactured austenitic stainless steels
- (2020) Decheng Kong et al. Additive Manufacturing
- Selective Laser Melting to Manufacture “In Situ” Metal Matrix Composites: A Review
- (2019) Sasan Dadbakhsh et al. ADVANCED ENGINEERING MATERIALS
- Advanced Mechanical Strength in Post Heat Treated SLM 2507 at Room and High Temperature Promoted by Hard/Ductile Sigma Precipitates
- (2019) Kamran Saeidi et al. Metals
- Additively Manufactured Nitrogen-Atomized 17-4 PH Stainless Steel with Mechanical Properties Comparable to Wrought
- (2019) Eric A. Lass et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural characterisation and in-situ straining of additive-manufactured X3NiCoMoTi 18-9-5 maraging steel
- (2019) Ludmila Kučerová et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Preparation and mechanical properties of selective laser melted H13 steel
- (2019) Bo Ren et al. JOURNAL OF MATERIALS RESEARCH
- Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
- (2019) M.J. Bermingham et al. ACTA MATERIALIA
- In Situ Measurement of Thermal Strain Development in 420 Stainless Steel Additive Manufactured Metals
- (2019) N. Momenzadeh et al. EXPERIMENTAL MECHANICS
- Precipitation in 300 grade maraging steel built by selective laser melting: Aging at 510 °C for 2 h
- (2019) Sabrina Bodziak et al. MATERIALS CHARACTERIZATION
- Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing
- (2019) Faraz Deirmina et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cyclic deformation and fatigue behavior of additively manufactured 17–4 PH stainless steel
- (2019) Luiz Carneiro et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment
- (2019) P.D. Nezhadfar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Investigating Additively Manufactured 17-4 PH for Structural Applications
- (2019) Devin E. Burns et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel
- (2019) F.F. Conde et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser melting
- (2019) Yuchao Bai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Micromechanical response quantification using high-energy X-rays during phase transformations in additively manufactured 17-4 stainless steel
- (2019) Thien Q. Phan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Discrete element simulation of powder layer thickness in laser additive manufacturing
- (2019) Quanquan Han et al. POWDER TECHNOLOGY
- 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
- (2019) Nesma T. Aboulkhair et al. PROGRESS IN MATERIALS SCIENCE
- Hydrogen Embrittlement Behavior of 18Ni 300 Maraging Steel Produced by Selective Laser Melting
- (2019) Young Jin Kwon et al. Materials
- Process-Structure-Property Relationships of AISI H13 Tool Steel Processed with Selective Laser Melting
- (2019) Morteza Narvan et al. Materials
- An Investigation into Property-Performance Relationships for Laser Beam Powder Bed Fusion Additive Manufacturing
- (2019) Rakish Shrestha et al. Additive Manufacturing
- Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting
- (2019) J. Delahaye et al. ACTA MATERIALIA
- Effect of aging treatment on microstructure and properties of additively manufactured maraging steel
- (2019) Fei Zhou et al. IRONMAKING & STEELMAKING
- Shape and Performance Controlled Advanced Design for Additive Manufacturing (ADfAM): A Review of Slicing and Path Planning
- (2019) Donghua Zhao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures
- (2019) M. Abbaszadeh et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructural effects on the tensile and fracture behavior of selective laser melted H13 tool steel under varying conditions
- (2019) Jungsub Lee et al. MATERIALS CHARACTERIZATION
- Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing
- (2019) Joamin Gonzalez-Gutierrez et al. MATERIALS LETTERS
- Effect of beam shape and spatial energy distribution on weld bead geometry in conduction welding
- (2019) W.A. Ayoola et al. OPTICS AND LASER TECHNOLOGY
- Effect of Process Parameters on Residual Stresses, Distortions, and Porosity in Selective Laser Melting of Maraging Steel 300
- (2019) Mugwagwa et al. Metals
- Enhanced mechanical properties for 304L stainless steel parts fabricated by laser-foil-printing additive manufacturing
- (2019) Chia-Hung Hung et al. Journal of Manufacturing Processes
- Effects of Nb and Mo on the microstructure and properties of 420 stainless steel processed by laser-powder bed fusion
- (2019) Subrata Deb Nath et al. Additive Manufacturing
- Design of laser parameters for selectively laser melted maraging steel based on deposited energy density
- (2019) Asuka Suzuki et al. Additive Manufacturing
- Orientation dependent fatigue performance and mechanisms of selective laser melted maraging steel X3NiCoMoTi18-9-5
- (2019) James Damon et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue resistance of rib-to-deck welded joint in OSDs, analyzed by fracture mechanics
- (2019) Weijian Wu et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Steels in additive manufacturing: A review of their microstructure and properties
- (2019) P. Bajaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hydrogen embrittlement behaviors of additive manufactured maraging steel investigated by in situ high-energy X-ray diffraction
- (2019) Shilei Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective Laser Melting of Duplex Stainless Steel 2205: Effect of Post-Processing Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance
- (2019) Papula et al. Materials
- Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel
- (2019) F.F. Conde et al. Additive Manufacturing
- Solidification-driven orientation gradients in additively manufactured stainless steel
- (2019) Andrew T. Polonsky et al. ACTA MATERIALIA
- Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy
- (2019) Rongpei Shi et al. ACTA MATERIALIA
- An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: Densification, microstructure, and mechanical properties
- (2019) Raiyan Seede et al. ACTA MATERIALIA
- Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: Effects of ultrasonic frequency on microstructural and mechanical properties
- (2019) Hui Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Build orientation, surface roughness, and scan path influence on the microstructure, mechanical properties, and flexural fatigue behavior of Ti–6Al–4V fabricated by electron beam melting
- (2019) Andrew H. Chern et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication of a low alloy ultra-high strength (>1500 MPa yield) steel using powder bed fusion additive manufacturing
- (2019) Andelle D. Kudzal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of additive manufactured AISI 420 martensitic stainless steel
- (2019) Mohammad K. Alam et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting
- (2019) Jun Song et al. OPTICS AND LASER TECHNOLOGY
- Effect of powder chemical composition on the as-built microstructure of 17-4 PH stainless steel processed by selective laser melting
- (2019) Swathi Vunnam et al. Additive Manufacturing
- Study of powder recycling and its effect on printed parts during laser powder-bed fusion of 17-4 PH stainless steel
- (2019) Farid Ahmed et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound
- (2018) Bing Wang et al. ACTA MATERIALIA
- Metal Alloys for Fusion-Based Additive Manufacturing
- (2018) Duyao Zhang et al. ADVANCED ENGINEERING MATERIALS
- Thermomechanical modelling of laser surface glazing for H13 tool steel
- (2018) I. R. Kabir et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Ultrasonic vibration-assisted laser engineering net shaping of ZrO 2 -Al 2 O 3 bulk parts: Effects on crack suppression, microstructure, and mechanical properties
- (2018) Yingbin Hu et al. CERAMICS INTERNATIONAL
- Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review
- (2018) H. Shipley et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Trace Carbon Addition to Refine Microstructure and Enhance Properties of Additive-Manufactured Ti-6Al-4V
- (2018) S. Mereddy et al. JOM
- Modeling Particle Spray and Capture Efficiency for Direct Laser Deposition Using a Four Nozzle Powder Injection System
- (2018) Christopher Katinas et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Hybrid Processes in Additive Manufacturing
- (2018) Michael P. Sealy et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Yb: YAG laser welding of dual phase steel to aluminium alloy
- (2018) Indhu R. et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process
- (2018) V. Gunenthiram et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts
- (2018) Imade Koutiri et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior
- (2018) Xiaoyuan Lou et al. JOURNAL OF NUCLEAR MATERIALS
- Effect of build geometry on the microstructural development of 316L parts produced by additive manufacturing
- (2018) Alexander Leicht et al. MATERIALS CHARACTERIZATION
- A novel approach to direct preparation of complete lath martensite microstructure in tool steel by selective laser melting
- (2018) Hongyu Chen et al. MATERIALS LETTERS
- Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V
- (2018) Haider Ali et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Dislocation network in additive manufactured steel breaks strength–ductility trade-off
- (2018) Leifeng Liu et al. Materials Today
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Effect of build orientation on the surface quality, microstructure and mechanical properties of selective laser melting 316L stainless steel
- (2018) Hamza Hassn Alsalla et al. RAPID PROTOTYPING JOURNAL
- Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting
- (2018) Kun V. Yang et al. SCRIPTA MATERIALIA
- Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
- (2018) Zhongji Sun et al. NPG Asia Materials
- Crystallographic Features of Microstructure in Maraging Steel Fabricated by Selective Laser Melting
- (2018) Naoki Takata et al. Metals
- Low-Cycle Fatigue Behaviour of AISI 18Ni300 Maraging Steel Produced by Selective Laser Melting
- (2018) Ricardo Branco et al. Metals
- Fatigue Response of As-Built DMLS Maraging Steel and Effects of Aging, Machining, and Peening Treatments
- (2018) Dario Croccolo et al. Metals
- Evaluation of topology-optimized lattice structures manufactured via selective laser melting
- (2018) Zefeng Xiao et al. MATERIALS & DESIGN
- Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel
- (2018) James Mutua et al. MATERIALS & DESIGN
- On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing
- (2018) Sara Bagherifard et al. MATERIALS & DESIGN
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel
- (2018) Yu Sun et al. MATERIALS & DESIGN
- A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites
- (2018) Yingbin Hu et al. CERAMICS INTERNATIONAL
- Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel
- (2018) Tarun Bhardwaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel
- (2018) M. Åsberg et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions
- (2018) D. Carluccio et al. Journal of Manufacturing Processes
- An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing
- (2018) G. Meneghetti et al. INTERNATIONAL JOURNAL OF FATIGUE
- High-Temperature Properties and Microstructural Stability of the AISI H13 Hot-Work Tool Steel Processed by Selective Laser Melting
- (2018) Mei Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Working distance passive stability in laser directed energy deposition additive manufacturing
- (2018) James C. Haley et al. MATERIALS & DESIGN
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- Microstructure-property relationships of 420 stainless steel fabricated by laser-powder bed fusion
- (2018) Subrata Deb Nath et al. POWDER TECHNOLOGY
- Process phenomena influencing the tensile and anisotropic characteristics of additively manufactured maraging steel
- (2018) Barry Mooney et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting
- (2018) Olivier Andreau et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Machining characteristics of 18Ni-300 steel in additive/subtractive hybrid manufacturing
- (2017) Wei Du et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting
- (2017) Maciej Mazur et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Additive manufacturing of fatigue resistant materials: Challenges and opportunities
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling
- (2017) Jon Iñaki Arrizubieta et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping of stainless steel
- (2017) Weilong Cong et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting
- (2017) Jyoti Suryawanshi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Grain refinement of wire arc additively manufactured titanium by the addition of silicon
- (2017) S. Mereddy et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dimensionless numbers in additive manufacturing
- (2017) T. Mukherjee et al. JOURNAL OF APPLIED PHYSICS
- Effect of Heat Treatment on Microstructure and Mechanical Properties of Laser Additively Manufactured AISI H13 Tool Steel
- (2017) ChangJun Chen et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microhardness and Stress Analysis of Laser-Cladded AISI 420 Martensitic Stainless Steel
- (2017) Mohammad K. Alam et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of scan strategy on density and metallurgical properties of 17-4PH parts printed by Selective Laser Melting (SLM)
- (2017) R. Rashid et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition
- (2017) Peng Guo et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
- (2017) E. Liverani et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting of H13: microstructure and residual stress
- (2017) J. J. Yan et al. JOURNAL OF MATERIALS SCIENCE
- Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion
- (2017) N.P. Lavery et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition
- (2017) Mingming Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser additive manufacturing of M2 high-speed steel
- (2017) Min Zhang et al. MATERIALS SCIENCE AND TECHNOLOGY
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Additively manufactured hierarchical stainless steels with high strength and ductility
- (2017) Y. Morris Wang et al. NATURE MATERIALS
- Application of ultrasonic peening during DMLS production of 316L stainless steel and its effect on material behavior
- (2017) Joshua Gale et al. RAPID PROTOTYPING JOURNAL
- Metallographic evaluation of duplex stainless steel powders processed by selective laser melting
- (2017) Karl P. Davidson et al. RAPID PROTOTYPING JOURNAL
- Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel
- (2017) Mohamad Mahmoudi et al. RAPID PROTOTYPING JOURNAL
- Process planning for 8-axis robotized laser-based direct metal deposition system: A case on building revolved part
- (2017) Yaoyu Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
- (2017) Stéphane Gorsse et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy
- (2017) Hu Zhang et al. SCRIPTA MATERIALIA
- Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components
- (2017) Paul A. Colegrove et al. SCRIPTA MATERIALIA
- Is the energy density a reliable parameter for materials synthesis by selective laser melting?
- (2017) K. G. Prashanth et al. Materials Research Letters
- 3D Laser Shock Peening – A new method for the 3D control of residual stresses in Selective Laser Melting
- (2017) Nikola Kalentics et al. MATERIALS & DESIGN
- Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties
- (2017) Florian Hengsbach et al. MATERIALS & DESIGN
- Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel
- (2017) Chaolin Tan et al. MATERIALS & DESIGN
- Effect of scan pattern on the microstructure and mechanical properties of Powder Bed Fusion additive manufactured 17-4 stainless steel
- (2017) Andelle Kudzal et al. MATERIALS & DESIGN
- A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion
- (2017) Patcharapit Promoppatum et al. Engineering
- Normalised model-based processing diagrams for additive layer manufacture of engineering alloys
- (2016) Meurig Thomas et al. ACTA MATERIALIA
- Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
- (2016) Zhuqing Wang et al. ACTA MATERIALIA
- Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling
- (2016) Beth E. Carroll et al. ACTA MATERIALIA
- Grain refining by ultrasonic stirring of the weld pool
- (2016) Tao Yuan et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Characterization and Comparison of Inconel 625 Processed by Selective Laser Melting and Laser Metal Deposition
- (2016) Giulio Marchese et al. ADVANCED ENGINEERING MATERIALS
- Hybrid additive and subtractive machine tools – Research and industrial developments
- (2016) Joseph M. Flynn et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Additive manufacturing of metallic components by selective electron beam melting — a review
- (2016) C. Körner INTERNATIONAL MATERIALS REVIEWS
- Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
- (2016) Jason R. Trelewicz et al. JOM
- Evaluation of Select Surface Processing Techniques for In Situ Application During the Additive Manufacturing Build Process
- (2016) Todd A. Book et al. JOM
- Magnetic Characterization of Selective Laser-Melted Saf 2507 Duplex Stainless Steel
- (2016) Karl P. Davidson et al. JOM
- Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
- (2016) Eric A. Jägle et al. JOM
- Improvement in Geometrical Accuracy and Mechanical Property for Arc-Based Additive Manufacturing Using Metamorphic Rolling Mechanism
- (2016) Yang Xie et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Experimental study and modeling of H13 steel deposition using laser hot-wire additive manufacturing
- (2016) Zhenguo Nie et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Simulation of microstructure evolution during hybrid deposition and micro-rolling process
- (2016) Xiangman Zhou et al. JOURNAL OF MATERIALS SCIENCE
- Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
- (2016) Yuan Zhong et al. JOURNAL OF NUCLEAR MATERIALS
- Microstructures and mechanical properties of Fe-Cr stainless steel parts fabricated by ultrasonic vibration-assisted laser engineered net shaping process
- (2016) Fuda Ning et al. MATERIALS LETTERS
- Novel ferritic stainless steel formed by laser melting from duplex stainless steel powder with advanced mechanical properties and high ductility
- (2016) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of heat treatment on microstructure and tensile properties of laser melting deposited AISI 431 martensitic stainless steel
- (2016) Y. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material
- (2016) Arne Röttger et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure characterization and mechanical behavior of laser additive manufactured ultrahigh-strength AerMet100 steel
- (2016) Xianzhe Ran et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping
- (2016) Michał Ziętala et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of additive manufactured, powder-bed laser-fused materials
- (2016) Todd M. Mower et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and performance optimisation of stainless steel formed by laser additive manufacturing
- (2016) J. Li et al. MATERIALS SCIENCE AND TECHNOLOGY
- Effect of Energy Input on the Characteristic of AISI H13 and D2 Tool Steels Deposited by a Directed Energy Deposition Process
- (2016) Jun Seok Park et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influences of deposition strategies and oblique angle on properties of AISI316L stainless steel oblique thin-walled part by direct laser fabrication
- (2016) Xinlin Wang et al. OPTICS AND LASER TECHNOLOGY
- Combination of laser keyhole and conduction welding: Dissimilar laser welding of niobium and Ti-6Al-4V
- (2016) M.J. Torkamany et al. OPTICS AND LASERS IN ENGINEERING
- Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing
- (2016) Eric Jägle et al. Materials
- Aging Behaviour and Mechanical Performance of 18-Ni 300 Steel Processed by Selective Laser Melting
- (2016) Riccardo Casati et al. Metals
- Fatigue behavior of IN718 microtrusses produced via additive manufacturing
- (2016) Lena Huynh et al. MATERIALS & DESIGN
- The purification of AISI 420 stainless steel in laser solid forming
- (2016) Menghua Song et al. MATERIALS & DESIGN
- Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology
- (2016) Alejandro Hinojos et al. MATERIALS & DESIGN
- Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting
- (2016) J. Sander et al. MATERIALS & DESIGN
- Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing
- (2016) Ashley Reichardt et al. MATERIALS & DESIGN
- Strength analysis and modeling of cellular lattice structures manufactured using selective laser melting for tooling applications
- (2016) Rasoul Mahshid et al. MATERIALS & DESIGN
- Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- Selective laser melting of stainless steel 316L with low porosity and high build rates
- (2016) Zhongji Sun et al. MATERIALS & DESIGN
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
- (2015) M.J. Bermingham et al. ACTA MATERIALIA
- Functionally graded Ni-Ti microstructures synthesised in process by direct laser metal deposition
- (2015) T. E. Abioye et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure
- (2015) Sudha Cheruvathur et al. JOM
- Textures formed in a CoCrMo alloy by selective laser melting
- (2015) Xin Zhou et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting
- (2015) K. Saeidi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication of large Ti–6Al–4V structures by direct laser deposition
- (2015) Chunlei Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Layer thickness dependence of performance in high-power selective laser melting of 1Cr18Ni9Ti stainless steel
- (2015) Mingming Ma et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel
- (2015) Tyler LeBrun et al. MATERIALS & DESIGN
- Dilution characteristics of ultrasonic assisted laser clad yttria-stabilized zirconia coating
- (2015) Dongjiang Wu et al. MATERIALS LETTERS
- Surface modification of investment cast-316L implants: Microstructure effects
- (2015) Shimaa El-Hadad et al. Materials Science & Engineering C-Materials for Biological Applications
- Thermomechanical response of 3D laser-deposited Ti–6Al–4V alloy over a wide range of strain rates and temperatures
- (2015) Peng-Hui Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
- (2015) Aref Yadollahi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hardened austenite steel with columnar sub-grain structure formed by laser melting
- (2015) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and Mechanical Properties of Long Ti-6Al-4V Rods Additively Manufactured by Selective Electron Beam Melting Out of a Deep Powder Bed and the Effect of Subsequent Hot Isostatic Pressing
- (2015) S. L. Lu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and Mechanical Properties of Laser Clad and Post-cladding Tempered AISI H13 Tool Steel
- (2015) Gururaj Telasang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting
- (2015) Martin Joachim Holzweissig et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel
- (2015) G. Casalino et al. OPTICS AND LASER TECHNOLOGY
- Semi-empirical model of deposit size and porosity in 420 stainless steel and 4140 steel using laser engineered net shaping
- (2015) J.B. Ferguson et al. Journal of Manufacturing Processes
- A review of ultrasonic peening treatment
- (2015) Massoud Malaki et al. MATERIALS & DESIGN
- In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels
- (2015) P. Krakhmalev et al. MATERIALS & DESIGN
- Effects of substrate preheating on the thin-wall part built by laser metal deposition shaping
- (2014) Kai Zhang et al. APPLIED SURFACE SCIENCE
- Study of a hollow laser beam for cladding
- (2014) Shuang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Selective Laser Melting of Crack-Free High Density M2 High Speed Steel Parts by Baseplate Preheating
- (2014) Karolien Kempen et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Optimization of Scan Strategies in Selective Laser Melting of Aluminum Parts With Downfacing Areas
- (2014) Raya Mertens et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
- (2014) Gustavo Tapia et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Transformations of Carbides During Tempering of D3 Tool Steel
- (2014) Tadeusz Nykiel et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
- (2014) H. Khalid Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of molten pool boundaries on the mechanical properties of selective laser melting parts
- (2014) Wen Shifeng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
- (2014) Wayne E. King et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization of microstructure and residual stress in a 3D H13 tool steel component produced by additive manufacturing
- (2014) Ryan Cottam et al. JOURNAL OF MATERIALS RESEARCH
- Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting
- (2014) Eric A. Jägle et al. JOURNAL OF MATERIALS RESEARCH
- Mechanical Properties of Laser Welded 2205 Duplex Stainless Steel*
- (2014) Ceyhun Köse et al. Materials Testing
- An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
- (2014) Amanda S. Wu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Mechanical properties of alloy Ti–6Al–4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures
- (2014) A. Mertens et al. POWDER METALLURGY
- Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel
- (2014) G. Telasang et al. SURFACE & COATINGS TECHNOLOGY
- Effect and kinetic mechanism of ultrasonic vibration on solidification of 7050 aluminum alloy
- (2014) Ripeng Jiang et al. AIP Advances
- Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting deposition
- (2013) Yudai Wang et al. Chinese Journal of Aeronautics
- A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser melting
- (2013) H. Khalid Rafi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
- (2013) Qingbo Jia et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
- (2013) Damien Buchbinder et al. JOURNAL OF LASER APPLICATIONS
- Double-Sided Single-Pass Submerged Arc Welding for 2205 Duplex Stainless Steel
- (2013) Jian Luo et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- A parametric study of Inconel 625 wire laser deposition
- (2013) T.E. Abioye et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling
- (2013) Paul A. Colegrove et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of forming atmosphere on the deposition characteristics of 2Cr13 stainless steel during laser solid forming
- (2013) Menghua Song et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Direct laser fabrication of three dimensional components using SC420 stainless steel
- (2013) G.A. Ravi et al. MATERIALS & DESIGN
- Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior
- (2013) Bo Song et al. MATERIALS & DESIGN
- Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers
- (2013) Milton Sergio Fernandes de Lima et al. MATERIALS & DESIGN
- Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition
- (2013) Kamran Shah et al. MATERIALS & DESIGN
- Characterization of stainless steel parts by Laser Metal Deposition Shaping
- (2013) Kai Zhang et al. MATERIALS & DESIGN
- Crystal structure analysis of M2 high speed steel parts produced by selective laser melting
- (2013) Z.H. Liu et al. MATERIALS CHARACTERIZATION
- The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder
- (2013) Baicheng Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Highly Anisotropic Steel Processed by Selective Laser Melting
- (2013) Thomas Niendorf et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling
- (2013) Haiou Zhang et al. RAPID PROTOTYPING JOURNAL
- Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
- (2013) Jan Wilkes et al. RAPID PROTOTYPING JOURNAL
- Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
- (2013) Lawrence E. Murr et al. Journal of Materials Research and Technology-JMR&T
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
- (2012) Bey Vrancken et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Study on influential factors for process monitoring and control in laser aided additive manufacturing
- (2012) G. Bi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of pulsed Nd:YAG laser welding parameters and subsequent post-weld heat treatment on microstructure and hardness of AISI 420 stainless steel
- (2012) S.H. Baghjari et al. MATERIALS & DESIGN
- Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition
- (2012) J. Yu et al. MATERIALS & DESIGN
- Microstructure and property of rheocasting aluminum-alloy made with indirect ultrasonic vibration process
- (2012) Shusen Wu et al. MATERIALS LETTERS
- On selective laser melting of ultra high carbon steel: Effect of scan speed and post heat treatment
- (2012) M. A. Taha et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Influence of phase transformations on the asymptotic residual stress distribution arising near a sharp V-notch tip
- (2012) P Ferro MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel
- (2012) Mingming Ma et al. OPTICS AND LASER TECHNOLOGY
- Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturing
- (2012) B Verlee et al. POWDER METALLURGY
- Phase transformation refinement of coarse primary carbides in M2 high speed steel
- (2012) Fu-sheng PAN et al. Progress in Natural Science-Materials International
- Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks
- (2012) Igor Yadroitsev et al. RAPID PROTOTYPING JOURNAL
- Laser surface melting: A suitable technique to repair damaged surfaces made in 14 Ni (200 grade) maraging steel
- (2012) M. Cabeza et al. SURFACE & COATINGS TECHNOLOGY
- Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC
- (2012) J. Michael Wilson et al. SURFACE & COATINGS TECHNOLOGY
- Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
- (2011) E. Yasa et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Balling behavior of stainless steel and nickel powder during selective laser melting process
- (2011) Ruidi Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology
- (2011) Fude Wang INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical and experimental investigation of multilayer SS410 thin wall built by laser direct metal deposition
- (2011) Yongjie Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural characterization of AISI 431 martensitic stainless steel laser-deposited coatings
- (2011) I. Hemmati et al. JOURNAL OF MATERIALS SCIENCE
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Investigation into the direct laser forming process of steam turbine blade
- (2011) Z.L. Lu et al. OPTICS AND LASERS IN ENGINEERING
- The influence of standoff variations on the forming accuracy in laser direct metal deposition
- (2011) Gangxian Zhu et al. RAPID PROTOTYPING JOURNAL
- The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
- (2011) Evren Yasa et al. RAPID PROTOTYPING JOURNAL
- The effect of cladding speed on phase constitution and properties of AISI 431 stainless steel laser deposited coatings
- (2011) I. Hemmati et al. SURFACE & COATINGS TECHNOLOGY
- Dislocation Loop Formation and Growth under In Situ Laser and/or Electron Irradiation
- (2011) Zhanbing Yang et al. Scientific Reports
- Microporosity effects on cyclic plasticity and fatigue of LENS™-processed steel
- (2010) Y. Xue et al. ACTA MATERIALIA
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Metastable Austenite in 17-4 Precipitation-Hardening Stainless Steel Produced by Selective Laser Melting
- (2010) Luca Facchini et al. ADVANCED ENGINEERING MATERIALS
- Influence of shielding gas mixtures on bead profile and microstructural characteristics of super austenitic stainless steel weldments by laser welding
- (2010) Paulraj Sathiya et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies
- (2010) Itziar Tolosa et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Direct Three-Dimensional Layer Metal Deposition
- (2010) Jianzhong Ruan et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Single track formation in selective laser melting of metal powders
- (2010) I. Yadroitsev et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical properties of laser melting deposited 1Cr12Ni2WMoVNb steel
- (2010) Y.D. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on microstructure and mechanical properties of laser melting deposited 1Cr12Ni2WMoVNb steel
- (2010) Y.D. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of laser deposition patterns on part distortion, interior quality and mechanical properties by laser solid forming (LSF)
- (2010) Jun Yu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural evolution of AISI 4340 steel during Direct Metal Deposition process
- (2010) S. Bhattacharya et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
- (2010) S. S. Al-Bermani et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The prediction of the building precision in the Laser Engineered Net Shaping process using advanced networks
- (2010) Z.L. Lu et al. OPTICS AND LASERS IN ENGINEERING
- Application of direct laser metal tooling for AISI H13 tool steel
- (2010) Jae-Ho LEE et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Designing Ultrahigh Strength Steels with Good Ductility by Combining Transformation Induced Plasticity and Martensite Aging
- (2009) Dierk Raabe et al. ADVANCED ENGINEERING MATERIALS
- The influence of surface geometry and topography on the fatigue cracking behaviour of laser hybrid welded eccentric fillet joints
- (2009) M.M. Alam et al. APPLIED SURFACE SCIENCE
- An approach to assessing ultrasonic attenuation in molten magnesium alloys
- (2009) Ma Qian et al. JOURNAL OF APPLIED PHYSICS
- Phase Evolution in Laser Rapid Forming of Compositionally Graded Ti–Ni Alloys
- (2009) X. Lin et al. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME
- Densification and Properties of 420 Stainless Steel Produced by Three-Dimensional Printing With Addition of Si[sub 3]N[sub 4] Powder
- (2009) Li Sun et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
- (2009) Dongdong Gu et al. MATERIALS & DESIGN
- Composites by rapid prototyping technology
- (2009) S. Kumar et al. MATERIALS & DESIGN
- Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures
- (2009) Srikanth Bontha et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Morphology and Crystallography of Sub-Blocks in Ultra-Low Carbon Lath Martensite Steel
- (2009) S. Morito et al. MATERIALS TRANSACTIONS
- On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental–numerical investigation
- (2009) Masoud Alimardani et al. OPTICS AND LASERS IN ENGINEERING
- Analytical model of the catchment efficiency in high speed laser cladding
- (2009) Knut Partes SURFACE & COATINGS TECHNOLOGY
- Processing conditions and microstructural features of porous 316L stainless steel components by DMLS
- (2008) Dongdong Gu et al. APPLIED SURFACE SCIENCE
- Effects of processing parameters on consolidation and microstructure of W–Cu components by DMLS
- (2008) Dongdong Gu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The manufacture of a niobium/niobium-silicide-based alloy using direct laser fabrication
- (2008) Robert Dicks et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Preliminary investigation on distribution of residual stress generated by the selective laser melting process
- (2008) C Casavola et al. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
- The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming
- (2008) Xiaoming Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of cooling rate on solidification microstructures in AISI 304 stainless steel
- (2008) J. W. Fu et al. MATERIALS SCIENCE AND TECHNOLOGY
- Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys
- (2008) A. Ramirez et al. SCRIPTA MATERIALIA
- Direct laser fabrication of Ti6Al4V/TiB
- (2007) F. Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started