Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy

Effects of the addition of silicon to 7075 aluminum alloy on microstructure, mechanical properties, and selective laser melting processability

(2020) Yuki Otani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain structure control during metal 3D printing by high-intensity ultrasound

(2020) C. J. Todaro et al.   Nature Communications

New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review

(2019) Alberta Aversa et al.   Materials

Quasi-continuous-wave laser surface melting of aluminium alloy: Precipitate morphology, solute segregation and corrosion resistance

(2019) Guoyun Luo et al.   CORROSION SCIENCE

Nanostructured Al2O3-YAG-ZrO2 ternary eutectic components prepared by laser engineered net shaping

(2019) Zhiqi Fan et al.   ACTA MATERIALIA

Dynamics of pore formation during laser powder bed fusion additive manufacturing

(2019) Aiden A. Martin et al.   Nature Communications

Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms

(2019) Qingbo Jia et al.   ACTA MATERIALIA

3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting

(2019) Nesma T. Aboulkhair et al.   PROGRESS IN MATERIALS SCIENCE

Cracking behavior and control of β-solidifying Ti-40Al-9V-0.5Y alloy produced by selective laser melting

(2019) Piao Gao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting

(2018) Joseph R. Croteau et al.   ACTA MATERIALIA

A heat treatable TiB 2 /Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties

(2018) P. Wang et al.   COMPOSITES PART B-ENGINEERING

Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening

(2018) Rujian Sun et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys

(2018) Xiaojia Nie et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Analysis of processing parameters and characteristics of selective laser melted high strength Al-Cu-Mg alloys: From single tracks to cubic samples

(2018) Xiaojia Nie et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Scaling laws for the additive manufacturing

(2018) Alexander M. Rubenchik et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

A study of the microstructures and mechanical properties of Ti6Al4V fabricated by SLM under vacuum

(2018) Bin Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting

(2018) Kun V. Yang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Additive manufacturing of metallic components – Process, structure and properties

(2018) T. DebRoy et al.   PROGRESS IN MATERIALS SCIENCE

Microstructure characteristics and its formation mechanism of selective laser melting SiC reinforced Al-based composites

(2018) Xuan Zhao et al.   VACUUM

On the role of powder flow behavior in fluid thermodynamics and laser processability of Ni-based composites by selective laser melting

(2018) Dongdong Gu et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting

(2017) Ming Tang et al.   INTERNATIONAL JOURNAL OF FATIGUE

3D printing of high-strength aluminium alloys

(2017) John H. Martin et al.   NATURE

Additively manufactured hierarchical stainless steels with high strength and ductility

(2017) Y. Morris Wang et al.   NATURE MATERIALS

Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy

(2017) Hu Zhang et al.   SCRIPTA MATERIALIA

Effect of Si and Zr on the Microstructure and Properties of Al-Fe-Si-Zr Alloys

(2017) Anna Morozova et al.   Metals

Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode

(2017) Ting Qi et al.   MATERIALS & DESIGN

On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting

(2017) Umberto Scipioni Bertoli et al.   MATERIALS & DESIGN

Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing

(2017) Hui Xiao et al.   MATERIALS & DESIGN

Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting

(2016) Jyoti Suryawanshi et al.   ACTA MATERIALIA

Additive manufacturing of metals

(2016) Dirk Herzog et al.   ACTA MATERIALIA

The structural stability, mechanical properties and stacking fault energy of Al 3 Zr precipitates in Al-Cu-Zr alloys: HRTEM observations and first-principles calculations

(2016) Hai Hu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties

(2016) Hu Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In situ observation of sublimation-enhanced magnesium oxidation at elevated temperature

(2016) Zijiao Zhang et al.   Nano Research

Combination of laser keyhole and conduction welding: Dissimilar laser welding of niobium and Ti-6Al-4V

(2016) M.J. Torkamany et al.   OPTICS AND LASERS IN ENGINEERING

Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy

(2016) Jingjing Yang et al.   MATERIALS & DESIGN

The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting

(2016) Heng Rao et al.   MATERIALS & DESIGN

Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock

(2015) Allison M. Beese et al.   JOM

Selective laser melting of aluminum die-cast alloy—Correlations between process parameters, solidification conditions, and resulting mechanical properties

(2015) D. Buchbinder et al.   JOURNAL OF LASER APPLICATIONS

Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg

(2015) Christian Weingarten et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Viewpoint: metallurgical aspects of powder bed metal additive manufacturing

(2015) Rainer J. Hebert   JOURNAL OF MATERIALS SCIENCE

Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development

(2015) Noriko Read et al.   MATERIALS & DESIGN

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

(2014) Wayne E. King et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Initiation and growth mechanisms for weld solidification cracking

(2013) N. Coniglio et al.   INTERNATIONAL MATERIALS REVIEWS

In situ (Al3Zr+Al2O3np)/2024Al metal matrix composite with novel reinforcement distributions fabricated by reaction hot pressing

(2013) B. Kaveendran et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling

(2013) Paul A. Colegrove et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium

(2012) Dongdong Gu et al.   ACTA MATERIALIA

Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior

(2011) Erhard Brandl et al.   MATERIALS & DESIGN

As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

(2011) T. Vilaro et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Selective laser melting of aluminium components

(2010) Eleftherios Louvis et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy – An experimental study

(2009) H.D. Gopalakrishna et al.   ENGINEERING FAILURE ANALYSIS

Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)

(2008) Tarek Mabrouki et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE