- Home
- Publications
- Publication Search
- Publication Details
Title
Metal Alloys for Fusion-Based Additive Manufacturing
Authors
Keywords
-
Journal
ADVANCED ENGINEERING MATERIALS
Volume 20, Issue 5, Pages 1700952
Publisher
Wiley
Online
2018-02-01
DOI
10.1002/adem.201700952
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Densification behavior, microstructural evolution, and mechanical properties of TiC/316L stainless steel nanocomposites fabricated by selective laser melting
- (2018) Bandar AlMangour et al. MATERIALS & DESIGN
- Fatigue properties of a titanium alloy (Ti–6Al–4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress
- (2017) Nikolas Hrabe et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of alloying elements and growth rates on microstructure and mechanical properties in the directionally solidified Al–Si–X alloys
- (2017) Hasan Kaya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High tensile ductility and strength in the Ti-42Al-6V-1Cr alloy
- (2017) Hongwu Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Grain refinement of wire arc additively manufactured titanium by the addition of silicon
- (2017) S. Mereddy et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Laser processing of bulk metallic glass: A review
- (2017) E. Williams et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)
- (2017) Bartłomiej Wysocki et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Preliminary investigation on selective laser melting of Ti-5Al-2.5Sn α-Ti alloy: From single tracks to bulk 3D components
- (2017) Kaiwen Wei et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The effect of boron on the grain size and texture in additively manufactured β-Ti alloys
- (2017) S. A. Mantri et al. JOURNAL OF MATERIALS SCIENCE
- Crystallization prediction on laser three-dimensional printing of Zr-based bulk metallic glass
- (2017) Yunzhuo Lu et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- An additive approach to low temperature zero pressure sintering of bismuth antimony telluride thermoelectric materials
- (2017) Glenn C. Catlin et al. JOURNAL OF POWER SOURCES
- Effects of build orientation and element partitioning on microstructure and mechanical properties of biomedical Ti-6Al-4V alloy produced by laser sintering
- (2017) P. Mengucci et al. Journal of the Mechanical Behavior of Biomedical Materials
- Characterization and decompositional crystallography of the massive phase grains in an additively-manufactured Ti-6Al-4V alloy
- (2017) Zhilin Liu et al. MATERIALS CHARACTERIZATION
- Refining effect of electron beam melting on additive manufacturing of pure titanium products
- (2017) Hyung Ki Park et al. MATERIALS LETTERS
- CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment
- (2017) Tadashi Fujieda et al. MATERIALS LETTERS
- Formation mechanism of the α variant and its influence on the tensile properties of laser solid formed Ti-6Al-4V titanium alloy
- (2017) Zhuang Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys – Towards rapid alloy screening and design
- (2017) Christian Haase et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and properties of a novel titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si manufactured by laser additive manufacturing
- (2017) Guo-Chao Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
- (2017) Haize Galarraga et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of post-processed Inconel 718 manufactured through the electron beam melting process
- (2017) Michael M. Kirka et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of energy density on metallurgy and properties in metal additive manufacturing
- (2017) Shahir M. Yusuf et al. MATERIALS SCIENCE AND TECHNOLOGY
- Atmosphere Gas Carburizing for Improved Wear Resistance of Pure Titanium Fabricated by Additive Manufacturing
- (2017) Hyo Kyu Kim et al. MATERIALS TRANSACTIONS
- Microstructures and Grain Refinement of Additive-Manufactured Ti-xW Alloys
- (2017) Michael Y. Mendoza et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Strength–Ductility Property Maps of Powder Metallurgy (PM) Ti-6Al-4V Alloy: A Critical Review of Processing-Structure-Property Relationships
- (2017) P. Kumar et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- 3D printing of high-strength aluminium alloys
- (2017) John H. Martin et al. NATURE
- Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus
- (2017) Takuya Ishimoto et al. SCRIPTA MATERIALIA
- Design for additive manufacturing with site-specific properties in metals and alloys
- (2017) S. Tammas-Williams et al. SCRIPTA MATERIALIA
- Femtosecond-laser-based fabrication of metal/PDMS composite microstructures for mechanical force sensing
- (2017) Yasutaka Nakajima et al. Optical Materials Express
- Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting
- (2017) A.B. Spierings et al. MATERIALS & DESIGN
- Laser additive processing of a functionally graded internal fracture fixation plate
- (2017) D.D. Lima et al. MATERIALS & DESIGN
- Melt-pool motion, temperature variation and dendritic morphology of Inconel 718 during pulsed- and continuous-wave laser additive manufacturing: A comparative study
- (2017) Simeng Li et al. MATERIALS & DESIGN
- Laser additive manufacturing of iron aluminides strengthened by ordering, borides or coherent Heusler phase
- (2017) Alena Michalcová et al. MATERIALS & DESIGN
- Thermodynamic description of the quaternary Al-Si-Mg-Sc system and its application to the design of novel Sc-additional A356 alloys
- (2017) Zhao Lu et al. MATERIALS & DESIGN
- 3D printing of large, complex metallic glass structures
- (2017) Yiyu Shen et al. MATERIALS & DESIGN
- Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
- (2017) Cang Zhao et al. Scientific Reports
- Rationalization of anisotropic mechanical properties of Al-6061 fabricated using ultrasonic additive manufacturing
- (2016) Niyanth Sridharan et al. ACTA MATERIALIA
- A combinatorial assessment of Al x CrCuFeNi 2 (0
- (2016) T. Borkar et al. ACTA MATERIALIA
- Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting
- (2016) Ercan Cakmak et al. ACTA MATERIALIA
- Selective laser melting of Invar 36: Microstructure and properties
- (2016) Chunlei Qiu et al. ACTA MATERIALIA
- Massive transformation in Ti–6Al–4V additively manufactured by selective electron beam melting
- (2016) S.L. Lu et al. ACTA MATERIALIA
- Denudation of metal powder layers in laser powder bed fusion processes
- (2016) Manyalibo J. Matthews et al. ACTA MATERIALIA
- Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling
- (2016) Beth E. Carroll et al. ACTA MATERIALIA
- A precipitation-hardened high-entropy alloy with outstanding tensile properties
- (2016) J.Y. He et al. ACTA MATERIALIA
- Microstructural Control of Additively Manufactured Metallic Materials
- (2016) P.C. Collins et al. Annual Review of Materials Research
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- The new frontiers in computational modeling of material structures
- (2016) William Regli et al. COMPUTER-AIDED DESIGN
- The influence of scanning methods on the cracking failure of thin-wall metal parts fabricated by laser direct deposition shaping
- (2016) Long Ri-sheng et al. ENGINEERING FAILURE ANALYSIS
- Influence of processing parameters on beta grain morphology of laser solid forming of Ti-25V-15Cr burn-resistant titanium alloy
- (2016) Fengying Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A study on the residual stress during selective laser melting (SLM) of metallic powder
- (2016) Yang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Additive manufacturing of metallic components by selective electron beam melting — a review
- (2016) C. Körner INTERNATIONAL MATERIALS REVIEWS
- The metallurgy and processing science of metal additive manufacturing
- (2016) W. J. Sames et al. INTERNATIONAL MATERIALS REVIEWS
- Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
- (2016) Jason R. Trelewicz et al. JOM
- A Combinatorial Approach to the Investigation of Metal Systems that Form Both Bulk Metallic Glasses and High Entropy Alloys
- (2016) Brian A. Welk et al. JOM
- Influence of solution treatment on microstructure evolution of TC21 titanium alloy with near equiaxed β grains fabricated by laser additive manufacture
- (2016) Q. Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Processability of different IN738LC powder batches by selective laser melting
- (2016) Roman Engeli et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of real-time cooling rate on microstructure in Laser Additive Manufacturing
- (2016) Mohammad H. Farshidianfar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
- (2016) Yuan Zhong et al. JOURNAL OF NUCLEAR MATERIALS
- TiAl alloys in commercial aircraft engines
- (2016) B. P. Bewlay et al. MATERIALS AT HIGH TEMPERATURES
- Damage evolution and failure mechanisms in additively manufactured stainless steel
- (2016) Holly D. Carlton et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Age hardening in die-cast Mg–Al–RE alloys due to minor Mn additions
- (2016) S.M. Zhu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping
- (2016) Michał Ziętala et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties
- (2016) Hu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
- (2016) Nesma T. Aboulkhair et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mechanical behavior of additive manufactured, powder-bed laser-fused materials
- (2016) Todd M. Mower et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components
- (2016) F. Martina et al. MATERIALS SCIENCE AND TECHNOLOGY
- Wire + Arc Additive Manufacturing
- (2016) S. W. Williams et al. MATERIALS SCIENCE AND TECHNOLOGY
- SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices
- (2016) Maciej Mazur et al. RAPID PROTOTYPING JOURNAL
- A multicomponent TiZr-based amorphous brazing filler metal for high-strength joining of titanium alloy
- (2016) Shujie Pang et al. SCRIPTA MATERIALIA
- A β-titanium alloy with extra high strain-hardening rate: Design and mechanical properties
- (2016) C. Brozek et al. SCRIPTA MATERIALIA
- A cuboidal B2 nanoprecipitation-enhanced body-centered-cubic alloy Al 0.7 CoCrFe 2 Ni with prominent tensile properties
- (2016) Qing Wang et al. SCRIPTA MATERIALIA
- Stabilization of nanocrystalline alloys at high temperatures via utilizing high-entropy grain boundary complexions
- (2016) Naixie Zhou et al. SCRIPTA MATERIALIA
- Microstructure and hardness characterisation of laser coatings produced with a mixture of AISI 420 stainless steel and Fe-C-Cr-Nb-B-Mo steel alloy powders
- (2016) Shi Da Sun et al. SURFACE & COATINGS TECHNOLOGY
- Corrosion Behavior of AlSi10Mg Alloy Produced by Additive Manufacturing (AM) vs. Its Counterpart Gravity Cast Alloy
- (2016) Avi Leon et al. Metals
- Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review
- (2016) Vyasaraj Manakari et al. Metals
- Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting
- (2016) Xiaoli Zhao et al. MATERIALS & DESIGN
- A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti–6Al–4V components
- (2016) Blanka A. Szost et al. MATERIALS & DESIGN
- Selective laser melting (SLM) of AlSi12Mg lattice structures
- (2016) Martin Leary et al. MATERIALS & DESIGN
- Selective laser melting of Zr-based bulk metallic glasses: Processing, microstructure and mechanical properties
- (2016) X.P. Li et al. MATERIALS & DESIGN
- The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting
- (2016) Heng Rao et al. MATERIALS & DESIGN
- Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles
- (2016) Michael Cloots et al. MATERIALS & DESIGN
- Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
- (2016) Galina Kasperovich et al. MATERIALS & DESIGN
- Selective laser melting of stainless steel 316L with low porosity and high build rates
- (2016) Zhongji Sun et al. MATERIALS & DESIGN
- A review of dynamic recrystallization phenomena in metallic materials
- (2016) K. Huang et al. MATERIALS & DESIGN
- A novel titanium alloy manufactured by selective laser melting: Microstructure, high temperature oxidation resistance
- (2016) Y. Zhou et al. MATERIALS & DESIGN
- Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting
- (2016) Takahiro Kimura et al. MATERIALS & DESIGN
- A new insight into high-strength Ti62Nb12.2Fe13.6Co6.4Al5.8 alloys with bimodal microstructure fabricated by semi-solid sintering
- (2016) L. H. Liu et al. Scientific Reports
- Evaluation of defect density, microstructure, residual stress, elastic modulus, hardness and strength of laser-deposited AISI 4340 steel
- (2015) Guifang Sun et al. ACTA MATERIALIA
- On the role of melt flow into the surface structure and porosity development during selective laser melting
- (2015) Chunlei Qiu et al. ACTA MATERIALIA
- A selective laser melting and solution heat treatment refined Al–12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
- (2015) X.P. Li et al. ACTA MATERIALIA
- A criterion for cracking during solidification
- (2015) Sindo Kou ACTA MATERIALIA
- Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam melting
- (2015) Xipeng Tan et al. ACTA MATERIALIA
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
- (2015) W. Xu et al. ACTA MATERIALIA
- Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM)
- (2015) Johannes Strößner et al. ADVANCED ENGINEERING MATERIALS
- Material design and development: From classical thermodynamics to CALPHAD and ICME approaches
- (2015) Alan A. Luo CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
- Wire-feed additive manufacturing of metal components: technologies, developments and future interests
- (2015) Donghong Ding et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061
- (2015) Loong-Ee Loh et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting
- (2015) K. Saeidi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication of large Ti–6Al–4V structures by direct laser deposition
- (2015) Chunlei Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Selective laser melting of aluminum die-cast alloy—Correlations between process parameters, solidification conditions, and resulting mechanical properties
- (2015) D. Buchbinder et al. JOURNAL OF LASER APPLICATIONS
- Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
- (2015) Christian Weingarten et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
- (2015) Erik R. Denlinger et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Vacuum brazing of Ti 3 Al-based alloy to TiAl using TiZrCuNi(Co) fillers
- (2015) H.S. Ren et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- CuTiNiZrV Amorphous Alloy Foils for Vacuum Brazing of TiAl Alloy to 40Cr Steel
- (2015) Honggang Dong et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
- (2015) Noriko Read et al. MATERIALS & DESIGN
- Clustering of O–X, X = (Ag, Al, Ga, Sn, Sc, Zn, Zr) point defects in hexagonal Ti: Formation mechanism and ductility variations
- (2015) P. Kwasniak et al. MATERIALS CHEMISTRY AND PHYSICS
- Influence of element vaporization on formability, composition, microstructure, and mechanical performance of the selective laser melted Mg–Zn–Zr components
- (2015) Kaiwen Wei et al. MATERIALS LETTERS
- First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials
- (2015) Tadashi Fujieda et al. MATERIALS LETTERS
- Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
- (2015) Craig Brice et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
- (2015) Aref Yadollahi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
- (2015) Dongyun Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High strength beta titanium alloys: New design approach
- (2015) I.V. Okulov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Hardened austenite steel with columnar sub-grain structure formed by laser melting
- (2015) K. Saeidi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting
- (2015) Chunlei Qiu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
- (2015) E. Chlebus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering
- (2015) Chunze Yan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Critical Assessment 14: High entropy alloys and their development as structural materials
- (2015) D. B. Miracle MATERIALS SCIENCE AND TECHNOLOGY
- A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V
- (2015) Marco Simonelli et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The Contribution of Constitutional Supercooling to Nucleation and Grain Formation
- (2015) D. H. StJohn et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Cooling Rate Determination in Additively Manufactured Aluminum Alloy 2219
- (2015) Craig A. Brice et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Evaluation of Magnesium Die-Casting Alloys for Elevated Temperature Applications: Microstructure, Tensile Properties, and Creep Resistance
- (2015) Suming Zhu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
- (2015) Nesma T. Aboulkhair et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The use of high-entropy alloys in additive manufacturing
- (2015) Yevgeni Brif et al. SCRIPTA MATERIALIA
- Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting
- (2015) Dongdong Gu et al. SCRIPTA MATERIALIA
- Nanoeutectic Composites: Processing, Microstructure and Properties
- (2015) J. Das et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Printing Three-Dimensional Electrical Traces in Additive Manufactured Parts for Injection of Low Melting Temperature Metals
- (2015) John P. Swensen et al. Journal of Mechanisms and Robotics-Transactions of the ASME
- Evolution of solidification texture during additive manufacturing
- (2015) H. L. Wei et al. Scientific Reports
- A biopolymer-like metal enabled hybrid material with exceptional mechanical prowess
- (2015) Junsong Zhang et al. Scientific Reports
- Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting
- (2015) Haijun Gong et al. MATERIALS & DESIGN
- Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study
- (2015) Hyo Yun Jung et al. MATERIALS & DESIGN
- Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder
- (2015) Yang Liu et al. MATERIALS & DESIGN
- Fatigue Performance of Laser Additive Manufactured Ti–6Al–4V in Very High Cycle Fatigue Regime up to 109 Cycles
- (2015) Eric Wycisk et al. Frontiers in Materials
- Direct Writing of Gallium-Indium Alloy for Stretchable Electronics
- (2014) J. William Boley et al. ADVANCED FUNCTIONAL MATERIALS
- Mitigating grain growth in binary nanocrystalline alloys through solute selection based on thermodynamic stability maps
- (2014) K.A. Darling et al. COMPUTATIONAL MATERIALS SCIENCE
- Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy
- (2014) Baoqiang Cong et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
- (2014) Luke N. Carter et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
- (2014) Yong Huang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Improvement of Superelastic Performance of Ti-Nb Binary Alloys for Biomedical Applications
- (2014) W. Elmay et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
- (2014) Wayne E. King et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Defect generation and propagation mechanism during additive manufacturing by selective beam melting
- (2014) A. Bauereiß et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
- (2014) William J. Sames et al. JOURNAL OF MATERIALS RESEARCH
- Prediction and fabrication of Ti–Zr–Co ternary metallic glasses based on effective atomic radius in Ti solid solution from first-principles calculations
- (2014) Naoya Shirasawa et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting
- (2014) X.P. Li et al. MATERIALS & DESIGN
- High yield strength bulk Ti based bimodal ultrafine eutectic composites with enhanced plasticity
- (2014) Dinesh K. Misra et al. MATERIALS & DESIGN
- Chemical heterogeneity-induced plasticity in Ti–Fe–Bi ultrafine eutectic alloys
- (2014) C.H. Lee et al. MATERIALS & DESIGN
- High-efficiency combinatorial approach as an effective tool for accelerating metallic biomaterials research and discovery
- (2014) X.D. Zhang et al. Materials Science & Engineering C-Materials for Biological Applications
- Significant tensile ductility and toughness in an ultrafine-structured Ti 68.8 Nb 13.6 Co 6 Cu 5.1 Al 6.5 bi-modal alloy
- (2014) I.V. Okulov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Formation of a bimodal structure in ultrafine Ti–Fe–Nb alloys with high-strength and enhanced ductility
- (2014) G.H. Cao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of lanthanum boride on the sintering, sintered microstructure and mechanical properties of titanium and titanium alloys
- (2014) Y.F. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
- (2014) X.J. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy
- (2014) Kaiwen Wei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of a graded structural material
- (2014) H.S. Ren et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation
- (2014) K. Kempen et al. MATERIALS SCIENCE AND TECHNOLOGY
- Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718
- (2014) R. R. Dehoff et al. MATERIALS SCIENCE AND TECHNOLOGY
- Site specific control of crystallographic grain orientation through electron beam additive manufacturing
- (2014) R. R. Dehoff et al. MATERIALS SCIENCE AND TECHNOLOGY
- An A Priori Hot-Tearing Indicator Applied to Die-Cast Magnesium-Rare Earth Alloys
- (2014) Mark A. Easton et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process
- (2014) Yuan Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- On the Texture Formation of Selective Laser Melted Ti-6Al-4V
- (2014) Marco Simonelli et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Review of effect of oxygen on room temperature ductility of titanium and titanium alloys
- (2014) M. Yan et al. POWDER METALLURGY
- Mechanical properties of alloy Ti–6Al–4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures
- (2014) A. Mertens et al. POWDER METALLURGY
- Liquid phase 3D printing for quickly manufacturing conductive metal objects with low melting point alloy ink
- (2014) Lei Wang et al. Science China-Technological Sciences
- Residual stress via the contour method in compact tension specimens produced via selective laser melting
- (2014) Bey Vrancken et al. SCRIPTA MATERIALIA
- Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
- (2014) Douglas C. Hofmann et al. Scientific Reports
- Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
- (2013) L.E. Murr et al. ACTA MATERIALIA
- Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
- (2013) Damien Buchbinder et al. JOURNAL OF LASER APPLICATIONS
- Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
- (2013) H. K. Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- On a new concept of rotary draw bend-die adaptable for bending tubes with multiple outer diameters under non-mandrel condition
- (2013) T. Wen JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- In situ synthesized TiB–TiN reinforced Ti6Al4V alloy composite coatings: Microstructure, tribological and in-vitro biocompatibility
- (2013) Mitun Das et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel
- (2013) Kai Guan et al. MATERIALS & DESIGN
- Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers
- (2013) Milton Sergio Fernandes de Lima et al. MATERIALS & DESIGN
- Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition
- (2013) Kamran Shah et al. MATERIALS & DESIGN
- Characterization of stainless steel parts by Laser Metal Deposition Shaping
- (2013) Kai Zhang et al. MATERIALS & DESIGN
- Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments
- (2013) Donghua Dai et al. MATERIALS & DESIGN
- Effects of processing on microstructure and mechanical properties of a titanium alloy (Ti–6Al–4V) fabricated using electron beam melting (EBM), Part 2: Energy input, orientation, and location
- (2013) Nikolas Hrabe et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V
- (2013) Chunlei Qiu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
- (2013) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment
- (2013) K.G. Prashanth et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility
- (2013) M.J. Yao et al. SCRIPTA MATERIALIA
- Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science
- (2013) Lawrence E. Murr et al. Journal of Materials Research and Technology-JMR&T
- Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
- (2012) Dongdong Gu et al. ACTA MATERIALIA
- Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
- (2012) K.N. Amato et al. ACTA MATERIALIA
- Revisiting the role of peritectics in grain refinement of Al alloys
- (2012) Feng Wang et al. ACTA MATERIALIA
- Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
- (2012) Lore Thijs et al. ACTA MATERIALIA
- On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
- (2012) S. Leuders et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Computational Thermodynamics Aided High-Entropy Alloy Design
- (2012) Chuan Zhang et al. JOM
- Electronic structure mechanism of martensitic phase transformation in binary titanium alloys
- (2012) J. H. Dai et al. JOURNAL OF APPLIED PHYSICS
- Quo vadis, laser additive manufacturing?
- (2012) Ingomar Kelbassa et al. JOURNAL OF LASER APPLICATIONS
- Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition
- (2012) J. Yu et al. MATERIALS & DESIGN
- Effect of Heat Treatment on Niobium Segregation of Laser-Cladded IN718 Alloy Coating
- (2012) Yaocheng Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method
- (2012) Jean-Pierre Kruth et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting
- (2012) Yongqiang Yang et al. RAPID PROTOTYPING JOURNAL
- Laser processing of in situ synthesized TiB–TiN-reinforced Ti6Al4V alloy coatings
- (2012) Mitun Das et al. SCRIPTA MATERIALIA
- Electron Beam Melting of High Niobium Containing TiAl Alloy: Feasibility Investigation
- (2012) Mathieu Terner et al. STEEL RESEARCH INTERNATIONAL
- The Interdependence Theory: The relationship between grain formation and nucleant selection
- (2011) D.H. StJohn et al. ACTA MATERIALIA
- Microstructure and mechanical properties of selective laser melted magnesium
- (2011) C.C. Ng et al. APPLIED SURFACE SCIENCE
- Phase selection, microstructure and properties of laser rapidly solidified FeCoNiCrAl2Si coating
- (2011) Hui Zhang et al. INTERMETALLICS
- Balling behavior of stainless steel and nickel powder during selective laser melting process
- (2011) Ruidi Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of the mechanical properties of Inconel 718 components built by laser cladding
- (2011) I. Tabernero et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- The microstructure and mechanical properties of deposited-IN718 by selective laser melting
- (2011) Zemin Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition
- (2011) Bernd Baufeld et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Alloy design and property evaluation of new Ti–Cr–Nb alloys
- (2011) Ljerka Slokar et al. MATERIALS & DESIGN
- Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
- (2011) Baicheng Zhang et al. MATERIALS & DESIGN
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
- (2011) Erhard Brandl et al. MATERIALS & DESIGN
- Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
- (2011) T. Vilaro et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
- (2011) L. E. Murr et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Fabrication of magnesium using selective laser melting technique
- (2011) Chi Chung Ng et al. RAPID PROTOTYPING JOURNAL
- Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
- (2011) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies—Electron Beam Melting and Laser Beam Melting
- (2011) Mari Koike et al. Materials
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
- (2010) Lore Thijs et al. ACTA MATERIALIA
- Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy
- (2010) S. Singh et al. ACTA MATERIALIA
- Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting
- (2010) Ruidi Li et al. APPLIED SURFACE SCIENCE
- Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation
- (2010) S. Biamino et al. INTERMETALLICS
- Single track formation in selective laser melting of metal powders
- (2010) I. Yadroitsev et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys
- (2010) Kamran Shah et al. MATERIALS AND MANUFACTURING PROCESSES
- Semisolid processing of metallic materials
- (2010) H. V. Atkinson MATERIALS SCIENCE AND TECHNOLOGY
- Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
- (2010) Luca Facchini et al. RAPID PROTOTYPING JOURNAL
- 316L Stainless Steel with Gradient Porosity Fabricated by Selective Laser Melting
- (2009) Ruidi Li et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
- (2009) Dongdong Gu et al. MATERIALS & DESIGN
- Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures
- (2009) Srikanth Bontha et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)
- (2009) A Strondl et al. MATERIALS SCIENCE AND TECHNOLOGY
- Integrated Approach for Prediction of Hot Tearing
- (2009) Suyitno et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
- (2009) H. Qi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Increased stability in laser metal wire deposition through feedback from optical measurements
- (2009) Almir Heralić et al. OPTICS AND LASERS IN ENGINEERING
- Rapid manufacture of custom‐fitting surgical guides
- (2009) Richard Bibb et al. RAPID PROTOTYPING JOURNAL
- Mechanical properties of Ti-6Al-4V specimens produced by shaped metal deposition
- (2009) Bernd Baufeld et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications
- (2008) L.E. Murr et al. Journal of the Mechanical Behavior of Biomedical Materials
- Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion
- (2008) B. Zheng et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effects of boron on microstructure in cast titanium alloys
- (2008) M.J. Bermingham et al. SCRIPTA MATERIALIA
- Semi-solid microstructure evolution during reheating of aluminum A356 alloy deformed severely by ECAP
- (2007) S. Ashouri et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Study on microstructure and mechanical properties of laser rapid forming Inconel 718
- (2007) Xiaoming Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search