- Home
- Publications
- Publication Search
- Publication Details
Title
State-of-the-art in heat exchanger additive manufacturing
Authors
Keywords
-
Journal
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Volume 178, Issue -, Pages 121600
Publisher
Elsevier BV
Online
2021-06-29
DOI
10.1016/j.ijheatmasstransfer.2021.121600
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Understanding Laser Powder Bed Fusion Surface Roughness
- (2020) Jacob C. Snyder et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- EXPERIMENTAL AND NUMERICAL ANALYSIS OF ADDITIVELY MANUFACTURED INCONEL 718 COUPONS WITH LATTICE STRUCTURE
- (2020) Sarwesh N. Parbat et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- EFFECT OF ADDITIVE MANUFACTURING PROCESS PARAMETERS ON TURBINE COOLING
- (2020) Jacob C. Snyder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- PERFORMANCE OF PUBLIC FILM COOLING GEOMETRIES PRODUCED THROUGH ADDITIVE MANUFACTURING
- (2020) Jacob C. Snyder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Additively-manufactured metallic porous lattice heat exchangers for air-side heat transfer enhancement
- (2020) J.Y. Ho et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Comparison of Single-Phase Convection in Additive Manufactured Versus Traditional Metal Foams
- (2020) Justin Broughton et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Forced convection CFD analysis of architected and 3D printable heat sinks based on triply periodic minimal surfaces
- (2020) Oraib Al-Ketan et al. Journal of Thermal Science and Engineering Applications
- High power density thermal energy storage using additively manufactured heat exchangers and phase change material
- (2020) Hyunkyu Moon et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Investigating the effect of element shape of the face-centered cubic lattice structure on the flow and endwall heat transfer characteristics in a rectangular channel
- (2020) Dong Liang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Tailoring Surface Roughness Using Additive Manufacturing to Improve Internal Cooling
- (2020) Jacob C. Snyder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Experimental investigation of two-phase liquid–vapor flows in additive manufactured heat exchanger
- (2020) Cédric Septet et al. APPLIED THERMAL ENGINEERING
- Design complexity and performance analysis in additively manufactured heat exchangers
- (2020) Marwan Alsulami et al. The International Journal of Advanced Manufacturing Technology
- Flow and Thermal Transport Through Unit Cell Topologies of Cubic and Octahedron Families
- (2020) Inderjot Kaur et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- On the permeability of TPMS scaffolds
- (2020) Jorge Santos et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study
- (2019) Diab W. Abueidda et al. MATERIALS & DESIGN
- Fluid Permeability of Graded Porosity Scaffolds Architectured with Minimal Surfaces
- (2019) Masoud Zhianmanesh et al. ACS Biomaterials-Science & Engineering
- Review on the characteristics of flow and heat transfer in printed circuit heat exchangers
- (2019) Changye Huang et al. APPLIED THERMAL ENGINEERING
- Permeability versus Design in TPMS Scaffolds
- (2019) Castro et al. Materials
- Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces
- (2019) H. Montazerian et al. Acta Biomaterialia
- Multifunctional mechanical‐metamaterials based on triply periodic minimal surface lattices: A review
- (2019) Oraib Al-Ketan et al. ADVANCED ENGINEERING MATERIALS
- Enhanced Nucleate Pool Boiling on Copper-Diamond Textured Surfaces
- (2019) R.J. MacNamara et al. APPLIED THERMAL ENGINEERING
- Heat transfer enhancement of internal laminar flows using additively manufactured static mixers
- (2019) Beomjin Kwon et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- 3D printed spacers for organic fouling mitigation in membrane distillation
- (2019) Erik Hugo Cabrera Castillo et al. JOURNAL OF MEMBRANE SCIENCE
- 3D printed spacers based on TPMS architectures for scaling control in membrane distillation
- (2019) Navya Thomas et al. JOURNAL OF MEMBRANE SCIENCE
- Comparison of Additively Manufactured Louvered Plate-Fin Heat Exchangers
- (2019) Michael Bichnevicius et al. Journal of Thermal Science and Engineering Applications
- Thermal-hydraulic performance enhancement by combination of rectangular winglet pair and V-shaped dimples
- (2019) Inderjot Kaur et al. Journal of Thermal Science and Engineering Applications
- Thermal conductivity of architected cellular metamaterials
- (2019) A. Mirabolghasemi et al. ACTA MATERIALIA
- Experimental investigation of heat transfer and fluid flow in octet-truss lattice geometry
- (2019) Aniket Chaudhari et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Heat transfer enhancement of wedge-shaped channels by replacing pin fins with Kagome lattice structures
- (2019) Beibei Shen et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties
- (2019) Oraib Al-Ketan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical performance of highly permeable laser melted Ti6Al4V bone scaffolds
- (2019) Arun Arjunan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Experimental Characterization of a Chip-Level 3-D Printed Microjet Liquid Impingement Cooler for High-Performance Systems
- (2019) Tiwei Wei et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- Phase change heat transfer characteristics of an additively manufactured wick for heat pipe applications
- (2019) Davoud Jafari et al. APPLIED THERMAL ENGINEERING
- Experimental investigation of the cooling performance of 3-D printed hybrid water-cooled heat sinks
- (2019) C. Ulises Gonzalez-Valle et al. APPLIED THERMAL ENGINEERING
- Review of defects in lattice structures manufactured by powder bed fusion
- (2019) Ifeanyichukwu Echeta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Enhanced thermal hydraulic performance by V-shaped protrusion for gas turbine blade trailing edge cooling
- (2019) Inderjot Kaur et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Forced convection in additively manufactured sandwich-walled cylinders with thermo-mechanical multifunctionality
- (2019) Shanyouming Sun et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental study on the air-side thermal-flow performance of additively manufactured heat exchangers with novel fin designs
- (2019) Sebastian Unger et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Air Jet Impingement Cooling of Electronic Devices Using Additively Manufactured Nozzles
- (2019) Beomjin Kwon et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- Experimental validation of additively manufactured optimized shapes for passive cooling
- (2018) Boyan S. Lazarov et al. APPLIED ENERGY
- Experimental characterization of an additively manufactured heat exchanger for dry cooling of power plants
- (2018) Martinus A. Arie et al. APPLIED THERMAL ENGINEERING
- A review of loop heat pipes for aircraft anti-icing applications
- (2018) Qian Su et al. APPLIED THERMAL ENGINEERING
- Design and evaluation of an additively manufactured aircraft heat exchanger
- (2018) David Saltzman et al. APPLIED THERMAL ENGINEERING
- Intensification of heat transfer in catalytic reactors by additively manufactured periodic open cellular structures (POCS)
- (2018) Corinna Busse et al. CHEMICAL ENGINEERING AND PROCESSING
- Isolating the effects of surface roughness versus wall shape in numerically optimized, additively manufactured micro cooling channels
- (2018) Kathryn L. Kirsch et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Transpiration cooling for additive manufactured porous plates with partition walls
- (2018) Gan Huang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Mass transfer analysis of ultrafiltration using spacers based on triply periodic minimal surfaces: Effects of spacer design, directionality and voidage
- (2018) Nurshaun Sreedhar et al. JOURNAL OF MEMBRANE SCIENCE
- Additive manufacturing of ZrO2 ceramic dental bridges by stereolithography
- (2018) Qin Lian et al. RAPID PROTOTYPING JOURNAL
- The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review
- (2018) Davoud Jafari et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Metal 3D-printed wick structures for heat pipe application: Capillary performance analysis
- (2018) Davoud Jafari et al. APPLIED THERMAL ENGINEERING
- An additively manufactured metallic manifold-microchannel heat exchanger for high temperature applications
- (2018) Xiang Zhang et al. APPLIED THERMAL ENGINEERING
- Exploiting volumetric effects in novel additively manufactured open solar receivers
- (2018) S. Luque et al. SOLAR ENERGY
- Evaluation of Additively Manufactured Microchannel Heat Sinks
- (2018) IEEE Transactions on Components Packaging and Manufacturing Technology
- Development of an additive manufacturing-enabled compact manifold microchannel heat exchanger
- (2018) Ratnesh Tiwari et al. APPLIED THERMAL ENGINEERING
- Experimental and Numerical Analysis of Additively Manufactured Coupons With Parallel Channels and Inline Wall Jets
- (2018) Sarwesh Narayan Parbat et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Experimental Investigation on Additively Manufactured Transpiration and Film Cooling Structures
- (2018) Zheng Min et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer
- (2018) M. Pelanconi et al. MATERIALS & DESIGN
- Experimental and numerical investigation of forced convection heat transfer in porous lattice structures produced by selective laser melting
- (2018) J.Y. Ho et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Fluid flow and heat transfer characteristics of octet truss lattice geometry
- (2018) Pawankumar Ekade et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- A permeable-membrane microchannel heat sink made by additive manufacturing
- (2018) Ivel L. Collins et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Review of Heat Exchangers Enabled by Polymer and Polymer Composite Additive Manufacturing
- (2017) David C. Deisenroth et al. HEAT TRANSFER ENGINEERING
- An investigation of a multi-layered oscillating heat pipe additively manufactured from Ti-6Al-4V powder
- (2017) Omar T. Ibrahim et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Pressure loss and heat transfer performance for additively and conventionally manufactured pin fin arrays
- (2017) Kathryn L. Kirsch et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Convective heat transfer performance of airfoil heat sinks fabricated by selective laser melting
- (2017) J.Y. Ho et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Numerical investigation of turbulent flow and heat transfer in two-pass ribbed channels
- (2017) Bharath Viswanath Ravi et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Additive Manufacturing to Advance Functional Design: An Application in the Medical Field
- (2017) Claudio Comotti et al. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING
- Effects of Geometry, Spacing, and Number of Pin Fins in Additively Manufactured Microchannel Pin Fin Arrays
- (2017) Katharine K. Ferster et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Longitudinal and radial permeability analysis of additively manufactured porous scaffolds: Effect of pore shape and porosity
- (2017) H. Montazerian et al. MATERIALS & DESIGN
- Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties
- (2017) H. Montazerian et al. MATERIALS & DESIGN
- Flow structure identification and analysis in fin arrays produced by cold spray additive manufacturing
- (2016) Philippe Dupuis et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental and numerical study of heat transfer due to developing flow in a two-pass rib roughened square duct
- (2016) Prashant Singh et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Saturated pool boiling of FC-72 from enhanced surfaces produced by Selective Laser Melting
- (2016) J.Y. Ho et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Effect of In-Hole Roughness on Film Cooling From a Shaped Hole
- (2016) Robert P. Schroeder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Roughness Effects on Flow and Heat Transfer for Additively Manufactured Channels
- (2016) Curtis K. Stimpson et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels
- (2016) Curtis K. Stimpson et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Build Direction Effects on Additively Manufactured Channels
- (2016) Jacob C. Snyder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces
- (2016) Diab W. Abueidda et al. MECHANICS OF MATERIALS
- Detecting surface roughness on SLS parts with various measuring techniques
- (2016) M. Launhardt et al. POLYMER TESTING
- Heat transfer of turbulent flow over surfaces with spherical dimples and teardrop dimples
- (2015) Yu Rao et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Numerical investigation of flow and heat transfer in rectangular channel with teardrop dimple/protrusion
- (2015) Yonghui Xie et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink
- (2015) Ercan M. Dede et al. JOURNAL OF MECHANICAL DESIGN
- Build Direction Effects on Microchannel Tolerance and Surface Roughness
- (2015) Jacob C. Snyder et al. JOURNAL OF MECHANICAL DESIGN
- Influence of Alumina Addition to Aluminum Fins for Compact Heat Exchangers Produced by Cold Spray Additive Manufacturing
- (2015) Aslan Farjam et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids
- (2015) Tisha Dixit et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Effect of surface roughness on liquid friction and transition characteristics in micro- and mini-channels
- (2014) Baomin Dai et al. APPLIED THERMAL ENGINEERING
- Periodic open cellular structures with ideal cubic cell geometry: Effect of porosity and cell orientation on pressure drop behavior
- (2014) M. Klumpp et al. CHEMICAL ENGINEERING JOURNAL
- Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering
- (2014) Luigi Ventola et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Additive manufacturing of pyramidal pin fins: Height and fin density effects under forced convection
- (2014) Yannick Cormier et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental and numerical determination of effective thermal conductivity of open cell FeCrAl-alloy metal foams
- (2014) Rhena Wulf et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- A polymer based miniature loop heat pipe with silicon substrate and temperature sensors for high brightness light-emitting diodes
- (2014) Huaiyu Ye et al. MICROELECTRONICS RELIABILITY
- Thermal Management of Hotspots With a Microjet-Based Hybrid Heat Sink for GaN-on-Si Devices
- (2014) Yong Han et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- A novel method for manufacturing sintered aluminium heat pipes (SAHP)
- (2013) M. Ameli et al. APPLIED THERMAL ENGINEERING
- Heat Transfer Enhancement Using Angled Grooves as Turbulence Promoters
- (2013) Krishnendu Saha et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Experiments investigation of the effects of surface roughness on laminar flow in macro tubes
- (2012) K. Huang et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Influence of process parameters on surface roughness of aluminum parts produced by DMLS
- (2012) F. Calignano et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Review on thermal transport in high porosity cellular metal foams with open cells
- (2012) C.Y. Zhao INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Effects of different orientations of winglet arrays on the performance of plate-fin heat exchangers
- (2012) Anupam Sinha et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Review and Advances in Heat Pipe Science and Technology
- (2012) Amir Faghri JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Minimal surface scaffold designs for tissue engineering
- (2011) Sebastian C. Kapfer et al. BIOMATERIALS
- Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials
- (2011) Jordi Delgado et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental investigation into the performance of heat pipe with micro grooves fabricated by Extrusion–ploughing process
- (2010) Tang Yong et al. ENERGY CONVERSION AND MANAGEMENT
- Microtomography-Based Simulation of Transport through Open-Cell Metal Foams
- (2010) Karthik K. Bodla et al. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS
- Heat transfer enhancement in a tube using delta-winglet twisted tape inserts
- (2009) S. Eiamsa-ard et al. APPLIED THERMAL ENGINEERING
- Surface tension-driven flow in wickless heat pipes with self-rewetting fluids
- (2009) Raffaele Savino et al. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
- The Effects of Manufacturing Tolerances on Gas Turbine Cooling
- (2009) Ronald S. Bunker JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Heat transfer coefficients of shell and coiled tube heat exchangers
- (2008) M.R. Salimpour EXPERIMENTAL THERMAL AND FLUID SCIENCE
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started