标题
State-of-the-art in heat exchanger additive manufacturing
作者
关键词
-
出版物
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Volume 178, Issue -, Pages 121600
出版商
Elsevier BV
发表日期
2021-06-29
DOI
10.1016/j.ijheatmasstransfer.2021.121600
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Understanding Laser Powder Bed Fusion Surface Roughness
- (2020) Jacob C. Snyder et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- EXPERIMENTAL AND NUMERICAL ANALYSIS OF ADDITIVELY MANUFACTURED INCONEL 718 COUPONS WITH LATTICE STRUCTURE
- (2020) Sarwesh N. Parbat et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- EFFECT OF ADDITIVE MANUFACTURING PROCESS PARAMETERS ON TURBINE COOLING
- (2020) Jacob C. Snyder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- PERFORMANCE OF PUBLIC FILM COOLING GEOMETRIES PRODUCED THROUGH ADDITIVE MANUFACTURING
- (2020) Jacob C. Snyder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Additively-manufactured metallic porous lattice heat exchangers for air-side heat transfer enhancement
- (2020) J.Y. Ho et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Comparison of Single-Phase Convection in Additive Manufactured Versus Traditional Metal Foams
- (2020) Justin Broughton et al. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Forced convection CFD analysis of architected and 3D printable heat sinks based on triply periodic minimal surfaces
- (2020) Oraib Al-Ketan et al. Journal of Thermal Science and Engineering Applications
- High power density thermal energy storage using additively manufactured heat exchangers and phase change material
- (2020) Hyunkyu Moon et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Investigating the effect of element shape of the face-centered cubic lattice structure on the flow and endwall heat transfer characteristics in a rectangular channel
- (2020) Dong Liang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Tailoring Surface Roughness Using Additive Manufacturing to Improve Internal Cooling
- (2020) Jacob C. Snyder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Experimental investigation of two-phase liquid–vapor flows in additive manufactured heat exchanger
- (2020) Cédric Septet et al. APPLIED THERMAL ENGINEERING
- Design complexity and performance analysis in additively manufactured heat exchangers
- (2020) Marwan Alsulami et al. The International Journal of Advanced Manufacturing Technology
- Flow and Thermal Transport Through Unit Cell Topologies of Cubic and Octahedron Families
- (2020) Inderjot Kaur et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- On the permeability of TPMS scaffolds
- (2020) Jorge Santos et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study
- (2019) Diab W. Abueidda et al. MATERIALS & DESIGN
- Fluid Permeability of Graded Porosity Scaffolds Architectured with Minimal Surfaces
- (2019) Masoud Zhianmanesh et al. ACS Biomaterials-Science & Engineering
- Review on the characteristics of flow and heat transfer in printed circuit heat exchangers
- (2019) Changye Huang et al. APPLIED THERMAL ENGINEERING
- Permeability versus Design in TPMS Scaffolds
- (2019) Castro et al. Materials
- Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces
- (2019) H. Montazerian et al. Acta Biomaterialia
- Multifunctional mechanical‐metamaterials based on triply periodic minimal surface lattices: A review
- (2019) Oraib Al-Ketan et al. ADVANCED ENGINEERING MATERIALS
- Enhanced Nucleate Pool Boiling on Copper-Diamond Textured Surfaces
- (2019) R.J. MacNamara et al. APPLIED THERMAL ENGINEERING
- Heat transfer enhancement of internal laminar flows using additively manufactured static mixers
- (2019) Beomjin Kwon et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- 3D printed spacers for organic fouling mitigation in membrane distillation
- (2019) Erik Hugo Cabrera Castillo et al. JOURNAL OF MEMBRANE SCIENCE
- 3D printed spacers based on TPMS architectures for scaling control in membrane distillation
- (2019) Navya Thomas et al. JOURNAL OF MEMBRANE SCIENCE
- Comparison of Additively Manufactured Louvered Plate-Fin Heat Exchangers
- (2019) Michael Bichnevicius et al. Journal of Thermal Science and Engineering Applications
- Thermal-hydraulic performance enhancement by combination of rectangular winglet pair and V-shaped dimples
- (2019) Inderjot Kaur et al. Journal of Thermal Science and Engineering Applications
- Thermal conductivity of architected cellular metamaterials
- (2019) A. Mirabolghasemi et al. ACTA MATERIALIA
- Experimental investigation of heat transfer and fluid flow in octet-truss lattice geometry
- (2019) Aniket Chaudhari et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Heat transfer enhancement of wedge-shaped channels by replacing pin fins with Kagome lattice structures
- (2019) Beibei Shen et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Functionally graded and multi-morphology sheet TPMS lattices: Design, manufacturing, and mechanical properties
- (2019) Oraib Al-Ketan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical performance of highly permeable laser melted Ti6Al4V bone scaffolds
- (2019) Arun Arjunan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Experimental Characterization of a Chip-Level 3-D Printed Microjet Liquid Impingement Cooler for High-Performance Systems
- (2019) Tiwei Wei et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- Phase change heat transfer characteristics of an additively manufactured wick for heat pipe applications
- (2019) Davoud Jafari et al. APPLIED THERMAL ENGINEERING
- Experimental investigation of the cooling performance of 3-D printed hybrid water-cooled heat sinks
- (2019) C. Ulises Gonzalez-Valle et al. APPLIED THERMAL ENGINEERING
- Review of defects in lattice structures manufactured by powder bed fusion
- (2019) Ifeanyichukwu Echeta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Enhanced thermal hydraulic performance by V-shaped protrusion for gas turbine blade trailing edge cooling
- (2019) Inderjot Kaur et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Forced convection in additively manufactured sandwich-walled cylinders with thermo-mechanical multifunctionality
- (2019) Shanyouming Sun et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental study on the air-side thermal-flow performance of additively manufactured heat exchangers with novel fin designs
- (2019) Sebastian Unger et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Air Jet Impingement Cooling of Electronic Devices Using Additively Manufactured Nozzles
- (2019) Beomjin Kwon et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- Experimental validation of additively manufactured optimized shapes for passive cooling
- (2018) Boyan S. Lazarov et al. APPLIED ENERGY
- Experimental characterization of an additively manufactured heat exchanger for dry cooling of power plants
- (2018) Martinus A. Arie et al. APPLIED THERMAL ENGINEERING
- A review of loop heat pipes for aircraft anti-icing applications
- (2018) Qian Su et al. APPLIED THERMAL ENGINEERING
- Design and evaluation of an additively manufactured aircraft heat exchanger
- (2018) David Saltzman et al. APPLIED THERMAL ENGINEERING
- Intensification of heat transfer in catalytic reactors by additively manufactured periodic open cellular structures (POCS)
- (2018) Corinna Busse et al. CHEMICAL ENGINEERING AND PROCESSING
- Isolating the effects of surface roughness versus wall shape in numerically optimized, additively manufactured micro cooling channels
- (2018) Kathryn L. Kirsch et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Transpiration cooling for additive manufactured porous plates with partition walls
- (2018) Gan Huang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Mass transfer analysis of ultrafiltration using spacers based on triply periodic minimal surfaces: Effects of spacer design, directionality and voidage
- (2018) Nurshaun Sreedhar et al. JOURNAL OF MEMBRANE SCIENCE
- Additive manufacturing of ZrO2 ceramic dental bridges by stereolithography
- (2018) Qin Lian et al. RAPID PROTOTYPING JOURNAL
- The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review
- (2018) Davoud Jafari et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Metal 3D-printed wick structures for heat pipe application: Capillary performance analysis
- (2018) Davoud Jafari et al. APPLIED THERMAL ENGINEERING
- An additively manufactured metallic manifold-microchannel heat exchanger for high temperature applications
- (2018) Xiang Zhang et al. APPLIED THERMAL ENGINEERING
- Exploiting volumetric effects in novel additively manufactured open solar receivers
- (2018) S. Luque et al. SOLAR ENERGY
- Evaluation of Additively Manufactured Microchannel Heat Sinks
- (2018) IEEE Transactions on Components Packaging and Manufacturing Technology
- Development of an additive manufacturing-enabled compact manifold microchannel heat exchanger
- (2018) Ratnesh Tiwari et al. APPLIED THERMAL ENGINEERING
- Experimental and Numerical Analysis of Additively Manufactured Coupons With Parallel Channels and Inline Wall Jets
- (2018) Sarwesh Narayan Parbat et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Experimental Investigation on Additively Manufactured Transpiration and Film Cooling Structures
- (2018) Zheng Min et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Thermal design, optimization and additive manufacturing of ceramic regular structures to maximize the radiative heat transfer
- (2018) M. Pelanconi et al. MATERIALS & DESIGN
- Experimental and numerical investigation of forced convection heat transfer in porous lattice structures produced by selective laser melting
- (2018) J.Y. Ho et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Fluid flow and heat transfer characteristics of octet truss lattice geometry
- (2018) Pawankumar Ekade et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- A permeable-membrane microchannel heat sink made by additive manufacturing
- (2018) Ivel L. Collins et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Review of Heat Exchangers Enabled by Polymer and Polymer Composite Additive Manufacturing
- (2017) David C. Deisenroth et al. HEAT TRANSFER ENGINEERING
- An investigation of a multi-layered oscillating heat pipe additively manufactured from Ti-6Al-4V powder
- (2017) Omar T. Ibrahim et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Pressure loss and heat transfer performance for additively and conventionally manufactured pin fin arrays
- (2017) Kathryn L. Kirsch et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Convective heat transfer performance of airfoil heat sinks fabricated by selective laser melting
- (2017) J.Y. Ho et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Numerical investigation of turbulent flow and heat transfer in two-pass ribbed channels
- (2017) Bharath Viswanath Ravi et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Additive Manufacturing to Advance Functional Design: An Application in the Medical Field
- (2017) Claudio Comotti et al. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING
- Effects of Geometry, Spacing, and Number of Pin Fins in Additively Manufactured Microchannel Pin Fin Arrays
- (2017) Katharine K. Ferster et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Longitudinal and radial permeability analysis of additively manufactured porous scaffolds: Effect of pore shape and porosity
- (2017) H. Montazerian et al. MATERIALS & DESIGN
- Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties
- (2017) H. Montazerian et al. MATERIALS & DESIGN
- Flow structure identification and analysis in fin arrays produced by cold spray additive manufacturing
- (2016) Philippe Dupuis et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental and numerical study of heat transfer due to developing flow in a two-pass rib roughened square duct
- (2016) Prashant Singh et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Saturated pool boiling of FC-72 from enhanced surfaces produced by Selective Laser Melting
- (2016) J.Y. Ho et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Effect of In-Hole Roughness on Film Cooling From a Shaped Hole
- (2016) Robert P. Schroeder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Roughness Effects on Flow and Heat Transfer for Additively Manufactured Channels
- (2016) Curtis K. Stimpson et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Scaling Roughness Effects on Pressure Loss and Heat Transfer of Additively Manufactured Channels
- (2016) Curtis K. Stimpson et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Build Direction Effects on Additively Manufactured Channels
- (2016) Jacob C. Snyder et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces
- (2016) Diab W. Abueidda et al. MECHANICS OF MATERIALS
- Detecting surface roughness on SLS parts with various measuring techniques
- (2016) M. Launhardt et al. POLYMER TESTING
- Heat transfer of turbulent flow over surfaces with spherical dimples and teardrop dimples
- (2015) Yu Rao et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Numerical investigation of flow and heat transfer in rectangular channel with teardrop dimple/protrusion
- (2015) Yonghui Xie et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink
- (2015) Ercan M. Dede et al. JOURNAL OF MECHANICAL DESIGN
- Build Direction Effects on Microchannel Tolerance and Surface Roughness
- (2015) Jacob C. Snyder et al. JOURNAL OF MECHANICAL DESIGN
- Influence of Alumina Addition to Aluminum Fins for Compact Heat Exchangers Produced by Cold Spray Additive Manufacturing
- (2015) Aslan Farjam et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids
- (2015) Tisha Dixit et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Effect of surface roughness on liquid friction and transition characteristics in micro- and mini-channels
- (2014) Baomin Dai et al. APPLIED THERMAL ENGINEERING
- Periodic open cellular structures with ideal cubic cell geometry: Effect of porosity and cell orientation on pressure drop behavior
- (2014) M. Klumpp et al. CHEMICAL ENGINEERING JOURNAL
- Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering
- (2014) Luigi Ventola et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Additive manufacturing of pyramidal pin fins: Height and fin density effects under forced convection
- (2014) Yannick Cormier et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Experimental and numerical determination of effective thermal conductivity of open cell FeCrAl-alloy metal foams
- (2014) Rhena Wulf et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- A polymer based miniature loop heat pipe with silicon substrate and temperature sensors for high brightness light-emitting diodes
- (2014) Huaiyu Ye et al. MICROELECTRONICS RELIABILITY
- Thermal Management of Hotspots With a Microjet-Based Hybrid Heat Sink for GaN-on-Si Devices
- (2014) Yong Han et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- A novel method for manufacturing sintered aluminium heat pipes (SAHP)
- (2013) M. Ameli et al. APPLIED THERMAL ENGINEERING
- Heat Transfer Enhancement Using Angled Grooves as Turbulence Promoters
- (2013) Krishnendu Saha et al. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Experiments investigation of the effects of surface roughness on laminar flow in macro tubes
- (2012) K. Huang et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Influence of process parameters on surface roughness of aluminum parts produced by DMLS
- (2012) F. Calignano et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Review on thermal transport in high porosity cellular metal foams with open cells
- (2012) C.Y. Zhao INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Effects of different orientations of winglet arrays on the performance of plate-fin heat exchangers
- (2012) Anupam Sinha et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Review and Advances in Heat Pipe Science and Technology
- (2012) Amir Faghri JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME
- Minimal surface scaffold designs for tissue engineering
- (2011) Sebastian C. Kapfer et al. BIOMATERIALS
- Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials
- (2011) Jordi Delgado et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Experimental investigation into the performance of heat pipe with micro grooves fabricated by Extrusion–ploughing process
- (2010) Tang Yong et al. ENERGY CONVERSION AND MANAGEMENT
- Microtomography-Based Simulation of Transport through Open-Cell Metal Foams
- (2010) Karthik K. Bodla et al. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS
- Heat transfer enhancement in a tube using delta-winglet twisted tape inserts
- (2009) S. Eiamsa-ard et al. APPLIED THERMAL ENGINEERING
- Surface tension-driven flow in wickless heat pipes with self-rewetting fluids
- (2009) Raffaele Savino et al. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW
- The Effects of Manufacturing Tolerances on Gas Turbine Cooling
- (2009) Ronald S. Bunker JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME
- Heat transfer coefficients of shell and coiled tube heat exchangers
- (2008) M.R. Salimpour EXPERIMENTAL THERMAL AND FLUID SCIENCE
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search