A comprehensive review on metallic implant biomaterials and their subtractive manufacturing
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A comprehensive review on metallic implant biomaterials and their subtractive manufacturing
Authors
Keywords
-
Journal
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume -, Issue -, Pages -
Publisher
Springer Science and Business Media LLC
Online
2022-02-24
DOI
10.1007/s00170-022-08770-8
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: A review and future prospect
- (2021) Danil Yu. Pimenov et al. Journal of Materials Research and Technology-JMR&T
- The effect of micro and Nano hydroxyapatite Powder on biocompatibility and surface Integrity of Ti6Al4V (ELI) in powder mixed electrical discharge machining
- (2021) Hamidullah Yaşar et al. Surface Topography-Metrology and Properties
- Development of Ti–In alloys by powder metallurgy for application as dental biomaterial
- (2021) L. Romero-Resendiz et al. Journal of Materials Research and Technology-JMR&T
- Effect of Powder Particle Concentration and Tool Electrode Material amid Zinc Powder-Mixed µEDM of Biocompatible Mg Alloy AZ91D
- (2021) Rahul Davis et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- State of the art of tool texturing in machining
- (2021) Alisson R. Machado et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Performance Study of Cryo-Treated End Mill Via Wet, Cryogenic, and Hybrid Lubri-Coolant-Milling Induced Surface Integrity of Biocompatible Mg Alloy AZ91D
- (2021) Rahul Davis et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review
- (2021) Md Al-Amin et al. Materials
- Surface Modification of Medical-Grade Ni55.6Ti44.4 alloy via enhanced machining characteristics of Zn Powder Mixed-μ-EDM
- (2021) Rahul Davis et al. SURFACE & COATINGS TECHNOLOGY
- Fundamental Investigation into Tool Wear and Surface Quality in High-Speed Machining of Ti6Al4V Alloy
- (2021) Adel T. Abbas et al. Materials
- Performance Investigation of Cryo-treated End Mill on the Mechanical and in vitro behavior of Hybrid-lubri-coolant-milled Ti-6Al-4V alloy
- (2021) Rahul Davis et al. Journal of Manufacturing Processes
- Study on the Cutting Performance of Micro Textured Tools on Cutting Ti-6Al-4V Titanium Alloy
- (2020) Kairui Zheng et al. Micromachines
- An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations
- (2020) Cleiton Lazaro Fazolo de Assis et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Powder mixed-EDM for potential biomedical applications: A critical review
- (2020) Md Al-Amin et al. MATERIALS AND MANUFACTURING PROCESSES
- Laser-Machining of Microchannels in NiTi-Based Shape-Memory Alloys: Experimental Analysis and Process Optimization
- (2020) Muneer Khan Mohammed et al. Materials
- Micro ED Milling of Ti-6Al-4V with SiC Nano Powder Mixed Dielectrics at Different Ranges of Discharge Energy
- (2020) K. V. Arun Pillai et al. Silicon
- Fabrication of micro-channels on Co–Cr–Mo joints by micro-abrasive jet direct writing
- (2020) Ruslan Melentiev et al. Journal of Manufacturing Processes
- The Effect of Various Surface Treatments of Ti6Al4V on the Growth and Osteogenic Differentiation of Adipose Tissue-Derived Stem Cells
- (2020) Jana Stepanovska et al. Coatings
- Review of ultrasonic vibration-assisted machining in advanced materials
- (2020) Zhichao Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of surface deformation on biocompatibility of biomedical alloys
- (2020) Zhizhong She et al. Materials Science & Engineering C-Materials for Biological Applications
- State of the art in processing of shape memory alloys with electrical discharge machining: A review
- (2020) Ranjit Singh et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Processing Characteristics of Micro Electrical Discharge Machining for Surface Modification of TiNi Shape Memory Alloys Using a TiC Powder Dielectric
- (2020) Ziliang Zhu et al. Micromachines
- Assessment of cryo-MQL environment for machining of Ti-6Al-4V
- (2020) Kishor Kumar Gajrani Journal of Manufacturing Processes
- Nitinol manufacturing and micromachining: A review of processes and their suitability in processing medical-grade nitinol
- (2019) James Wamai Mwangi et al. Journal of Manufacturing Processes
- Chilled Air System and Size Effect in Micro-milling of Nickel−Titanium Shape Memory Alloys
- (2019) Zailani Zainal Abidin et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- In vitro corrosion and hemocompatibility evaluation of electrical discharge treated cobalt–chromium implant
- (2019) Amit Mahajan et al. JOURNAL OF MATERIALS RESEARCH
- Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V
- (2019) Muhammad Jamil et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
- (2019) Lai‐Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Investigation of Surface Morphology and Topography Features on Abrasive Water Jet Milled Surface Pattern of SS 304
- (2019) N. Yuvaraj et al. JOURNAL OF TESTING AND EVALUATION
- Improving surface integrity and corrosion resistance of additive manufactured Ti6Al4V alloy by cryogenic machining
- (2019) R. Bertolini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of various metal powder mixed dielectric on micro-EDM characteristics of Ti-6Al-4V
- (2019) A. P. Tiwary et al. MATERIALS AND MANUFACTURING PROCESSES
- Laser-Based Hybrid Manufacturing of Endosseous Implants: Optimized Titanium Surfaces for Enhancing Osteogenic Differentiation of Human Mesenchymal Stem Cells
- (2019) Guenaelle Bouet et al. ACS Biomaterials-Science & Engineering
- Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy
- (2019) Alborz Shokrani et al. Journal of Manufacturing Processes
- Potential of electrical discharge treatment to enhance the in vitro cytocompatibility and tribological performance of Co–Cr implant
- (2019) Amit Mahajan et al. JOURNAL OF MATERIALS RESEARCH
- Powder mixed electrical discharge machining for antibacterial coating on titanium implant surfaces
- (2019) Viet D. Bui et al. Journal of Manufacturing Processes
- Investigation of machining characteristics of hard-to-machine Ti-6Al-4V-ELI alloy for biomedical applications
- (2019) Swasthik Pradhan et al. Journal of Materials Research and Technology-JMR&T
- Improving surface integrity aspects of AISI 316L in the context of bioimplant applications
- (2019) Sadaf Zahoor et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Medical devices biomaterials – A review
- (2019) AJ Festas et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- Design and fabrication of Ti–Zr-Hf-Cr-Mo and Ti–Zr-Hf-Co-Cr-Mo high-entropy alloys as metallic biomaterials
- (2019) Takeshi Nagase et al. Materials Science & Engineering C-Materials for Biological Applications
- On the machinability and properties of Ti–6Al–4V biomaterial with n-HAp powder–mixed ED machining
- (2019) Preetkanwal Singh Bains et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Antibacterial coating of Ti-6Al-4V surfaces using silver nano-powder mixed electrical discharge machining
- (2019) Viet D. Bui et al. SURFACE & COATINGS TECHNOLOGY
- Risk factors for refracture after plate removal for midshaft clavicle fracture after bone union
- (2019) Shang-Wen Tsai et al. Journal of Orthopaedic Surgery and Research
- Laser micromachining of titanium alloy in water and ice at different temperatures
- (2019) Taweeporn Wuttisarn et al. OPTICS AND LASER TECHNOLOGY
- Machining-induced surface transformations of magnesium alloys to enhance corrosion resistance in human-like environment
- (2018) Stefania Bruschi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Experimental study on chip deformation of Ti-6Al-4V titanium alloy in cryogenic cutting
- (2018) Wei Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining of biocompatible materials: a review
- (2018) Kushendarsyah Saptaji et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure evolution, electrochemical properties and in-vitro properties of Ti-Nb-Zr based biocomposite by hydroxyapatite bioceramic
- (2018) Yuanhuai He et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tuning of the hydrophilicity and hydrophobicity of nitrogen doped carbon dots: A facile approach towards high efficient lubricant nanoadditives
- (2018) Wangji Shang et al. JOURNAL OF MOLECULAR LIQUIDS
- Mechanical properties of magnesium alloys for medical application: A review
- (2018) Junxiu Chen et al. Journal of the Mechanical Behavior of Biomedical Materials
- Enhancing biocompatibility of Co-Cr alloy implants via electrical discharge process
- (2018) Amit Mahajan et al. MATERIALS TECHNOLOGY
- Post-Processing of NiTi Alloys: Issues and Challenges
- (2018) N. Sharma et al. POWDER METALLURGY AND METAL CERAMICS
- Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review
- (2018) Chen Liu et al. SCANNING
- Particle migration and surface modification on Ti6Al4V in SiC powder mixed electrical discharge machining
- (2018) Tahsin T. Öpöz et al. Journal of Manufacturing Processes
- Active agents, biomaterials, and technologies to improve biolubrication and strengthen soft tissues
- (2018) Benjamin G. Cooper et al. BIOMATERIALS
- Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants
- (2018) Laila Damiati et al. Journal of Tissue Engineering
- Machinability of titanium alloy through electric discharge machining
- (2018) Naveed Ahmed et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of the AWJM Method on the Machined Surface Layer of AZ91D Magnesium Alloy and Simulation of Roughness Parameters Using Neural Networks
- (2018) Ireneusz Zagórski et al. Materials
- Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy
- (2018) Vinothkumar Sivalingam et al. Journal of Manufacturing Processes
- Surface modification of Ti-alloy by micro-electrical discharge process using tungsten disulphide powder suspension
- (2018) Shalini Mohanty et al. Journal of Manufacturing Processes
- Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions
- (2017) Mohd Danish et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Bio-Functional Design, Application and Trends in Metallic Biomaterials
- (2017) Ke Yang et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- A review on ionic liquids as sustainable lubricants in manufacturing and engineering: Recent research, performance, and applications
- (2017) S.A.S. Amiril et al. JOURNAL OF CLEANER PRODUCTION
- Preparation of Phytic Acid/Silane Hybrid Coating on Magnesium Alloy and Its Corrosion Resistance in Simulated Body Fluid
- (2017) Fengwu Wang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Surface Characteristics of Machined NiTi Shape Memory Alloy: The Effects of Cryogenic Cooling and Preheating Conditions
- (2017) Y. Kaynak et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- High speed cryogenic finish machining of Ti - 6Al4V with polycrystalline diamond tools
- (2017) Julius Schoop et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Machining of NiTi-shape memory alloys-A review
- (2017) C. Velmurugan et al. MACHINING SCIENCE AND TECHNOLOGY
- Performance evaluation of Al2O3 nano powder mixed dielectric for electric discharge machining of Inconel 825
- (2017) Amit Kumar et al. MATERIALS AND MANUFACTURING PROCESSES
- Surface modification of metallic biomaterials for enhanced functionality: a review
- (2017) A. Mahajan et al. MATERIALS TECHNOLOGY
- Curve micromachining on the edges of nitinol biliary stent by ultrashort pulses laser
- (2017) Chia-Hung Hung et al. OPTICS AND LASER TECHNOLOGY
- A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants
- (2017) Abdul’Azeez Abdu Aliyu et al. Advances in Materials Science and Engineering
- Investigation of carbon nanotube added dielectric on the surface characteristics and machining performance of Ti–6Al–4V alloy in EDM process
- (2017) Mohammadreza Shabgard et al. Journal of Manufacturing Processes
- Bulk Metallic Glasses for Implantable Medical Devices and Surgical Tools
- (2016) Philip Meagher et al. ADVANCED MATERIALS
- Multifunctional ceramic-metal biocomposites with Zinc containing antimicrobial glass coatings
- (2016) Leticia Esteban-Tejeda et al. CERAMICS INTERNATIONAL
- Enhancing the corrosion resistance of biodegradable Mg-based alloy by machining-induced surface integrity: influence of machining parameters on surface roughness and hardness
- (2016) M. S. Uddin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques
- (2016) Munish Kumar Gupta et al. JOURNAL OF CLEANER PRODUCTION
- Recent advances in turning with textured cutting tools: A review
- (2016) Varun Sharma et al. JOURNAL OF CLEANER PRODUCTION
- A Discharge Separation Model for Powder Mixed Electrical Discharge Machining
- (2016) Bülent Ekmekci et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening
- (2016) M. Lieblich et al. Journal of the Mechanical Behavior of Biomedical Materials
- Comparative investigation on using cryogenic machining in CNC milling ofTi-6Al-4Vtitanium alloy
- (2016) Alborz Shokrani et al. MACHINING SCIENCE AND TECHNOLOGY
- Electrical discharge grinding of polycrystalline diamond – Effect of wheel rotation
- (2016) M. Zulafif Rahim et al. MACHINING SCIENCE AND TECHNOLOGY
- Surface characteristics of Ti-6Al-4V by SiC abrasive-mixed EDM with magnetic stirring
- (2016) L. Li et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental investigation on performance of additive mixed dielectric during micro-electric discharge drilling on 316L stainless steel
- (2016) J. Cyril et al. MATERIALS AND MANUFACTURING PROCESSES
- Surfactant and graphite powder–assisted electrical discharge machining of titanium alloy
- (2016) Murahari Kolli et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- State of the art in powder-mixed electric discharge machining: A review
- (2016) Gangadharudu Talla et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Energy conscious cryogenic machining of Ti-6Al-4V titanium alloy
- (2016) Alborz Shokrani et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Developments in cutting tool technology in improving machinability of Ti6Al4V alloy: A review
- (2016) Abhineet Saini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Multi-process parameter optimization in face milling of Ti6Al4V alloy using response surface methodology
- (2016) Abhineet Saini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Dual-topography electrical discharge machining of titanium to improve biocompatibility
- (2016) Bryan E.J. Lee et al. SURFACE & COATINGS TECHNOLOGY
- Titanium perovskite (CaTiO 3 ) formation in Ti6Al4V alloy using the electrical discharge machining process for biomedical applications
- (2016) W.F. Sales et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Tool Rotational and Al2O3 Powder in Electro Discharge Machining Characteristics of NiTi-60 Shape Memory Alloy
- (2016) Saeed Daneshmand et al. Silicon
- Brief Overview on Nitinol as Biomaterial
- (2016) Abdul Wadood Advances in Materials Science and Engineering
- Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti–6Al–4V titanium alloy
- (2016) Alborz Shokrani et al. Journal of Manufacturing Processes
- Effects of cutting parameters on dry machining Ti-6Al-4V alloy with ultra-hard tools
- (2015) F. J. Sun et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Security and privacy issues in implantable medical devices: A comprehensive survey
- (2015) Carmen Camara et al. JOURNAL OF BIOMEDICAL INFORMATICS
- Processing and Characterization of Novel Biomimetic Nanoporous Bioceramic Surface on β-Ti Implant by Powder Mixed Electric Discharge Machining
- (2015) Chander Prakash et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel
- (2015) Adem Çiçek et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Surface modification of TiNi-based shape memory alloys by dry electrical discharge machining
- (2015) Tyau-Song Huang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions
- (2015) Y. Kaynak et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti–6Al–4V alloy
- (2015) Shoujin Sun et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Biomaterials for dental implants: current and future trends
- (2015) Donatella Duraccio et al. JOURNAL OF MATERIALS SCIENCE
- Machining parameters effect in dry turning of AISI 316L stainless steel using coated carbide tools
- (2015) Rusdi Nur et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Wear behaviour of PVD coated and cryogenically treated tools for Ti-6Al-4V turning
- (2015) Matteo Strano et al. International Journal of Material Forming
- Theoretical model for cutting force in rotary ultrasonic milling of dental zirconia ceramics
- (2014) Xingzhi Xiao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
- (2014) André Luiz Jardini et al. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY
- Cutting Speed Dependent Microstructure and Transformation Behavior of NiTi Alloy in Dry and Cryogenic Machining
- (2014) Y. Kaynak et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Machining and Phase Transformation Response of Room-Temperature Austenitic NiTi Shape Memory Alloy
- (2014) Yusuf Kaynak JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining
- (2014) Yusuf Kaynak et al. MACHINING SCIENCE AND TECHNOLOGY
- Experimental Study on Cutting Forces and Surface Integrity in High-Speed Side Milling ofTi-6Al-4VTitanium Alloy
- (2014) Fuzeng Wang et al. MACHINING SCIENCE AND TECHNOLOGY
- Cutting Force and Surface Roughness Characterization in Cryogenic High-Speed End Milling of Ti–6Al-4V ELI
- (2014) H. Safari et al. MATERIALS AND MANUFACTURING PROCESSES
- Cutting force, tool life and surface integrity in milling of titanium alloy Ti-6Al-4V with coated carbide tools
- (2014) Wilma Polini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Analysis of ignition risk in intermittent turning of UNS M11917 magnesium alloy at low cutting speeds based on the chip morphology
- (2014) Diego Carou et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Machinability comparison of AISI 4340 and Ti-6Al-4V under cryogenic and hybrid cooling environments: A knowledge engineering approach
- (2014) Khalid A Al-Ghamdi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- A biocompatible ionic liquid as an antiwear additive for biodegradable lubricants
- (2014) Bhawna Khemchandani et al. TRIBOLOGY INTERNATIONAL
- Biomanufacturing
- (2013) Mamoru Mitsuishi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Machinability and surface integrity of Nitinol shape memory alloy
- (2013) Yuebin Guo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- On geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys
- (2013) Ming Chu Kong et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Effect of Electrical Discharging on Formation of Nanoporous Biocompatible Layer on Ti-6Al-4V Alloys
- (2013) Tzu-Sen Yang et al. Implant Dentistry
- Compound machining of titanium alloy by super high speed EDM milling and arc machining
- (2013) Fei Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy
- (2013) Mohammed B Ndaliman et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- The effects of machining on the microstructure and transformation behavior of NiTi Alloy
- (2013) Y. Kaynak et al. SCRIPTA MATERIALIA
- Tribological behaviour of Ti6Al4V and Inconel718 under dry and cryogenic conditions—Application to the context of machining with carbide tools
- (2013) C. Courbon et al. TRIBOLOGY INTERNATIONAL
- Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions
- (2013) Zhiqiang Liu et al. WEAR
- Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining
- (2013) Y. Kaynak et al. WEAR
- Biomedical production of implants by additive electro-chemical and physical processes
- (2012) Paulo Bartolo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Enhanced osteoblast response to electrical discharge machining surface
- (2012) Fukunaga OTSUKA et al. DENTAL MATERIALS JOURNAL
- An experimental study of process variables in turning operations of Ti–6Al–4V and Cr–Co spherical prostheses
- (2012) J. V. Abellán-Nebot et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improving surface hardness of austenitic stainless steel using waterjet peening process
- (2012) Azmir Azhari et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
- (2012) A. Shokrani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of cryogenic burnishing on surface integrity modifications ofCo-Cr-Mobiomedical alloy
- (2012) Shu Yang et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation
- (2011) Rolando A. Gittens et al. BIOMATERIALS
- Performance evaluation of CBN, coated carbide, cryogenically treated uncoated/coated carbide inserts in finish-turning of hardened steel
- (2011) Manu Dogra et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components
- (2011) Z. Pu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface treatment by electric discharge machining of Ti–6Al–4V alloy for potential application in orthopaedics
- (2011) Petr Harcuba et al. Journal of the Mechanical Behavior of Biomedical Materials
- Cryogenic Turning of AISI 304 Stainless Steel with Modified Tungsten Carbide Tool Inserts
- (2011) M. Dhananchezian et al. MATERIALS AND MANUFACTURING PROCESSES
- Roughening of metallic biomaterials by abrasiveless waterjet peening: Characterization and viability
- (2011) S. Barriuso et al. WEAR
- Shape-memory NiTi with two-dimensional networks of micro-channels
- (2010) Anselm J. Neurohr et al. Acta Biomaterialia
- Bone bonding bioactivity of Ti metal and Ti–Zr–Nb–Ta alloys with Ca ions incorporated on their surfaces by simple chemical and heat treatments
- (2010) A. Fukuda et al. Acta Biomaterialia
- The effect of Electro Discharge Machining (EDM) on the corrosion resistance of dental alloys
- (2010) Argyro Ntasi et al. DENTAL MATERIALS
- Achieving Small Structures in Thin NiTi Sheets for Medical Applications with Water Jet and Micro Machining: A Comparison
- (2010) M. Frotscher et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Pulsed Nd:YAG laser cutting of NiTi shape memory alloys—Influence of process parameters
- (2010) Ronny Pfeifer et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Challenges in using waterjet machining of NiTi shape memory alloys: An analysis of controlled-depth milling
- (2010) M.C. Kong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Production of Ti–13Nb–13Zr alloy for surgical implants by powder metallurgy
- (2010) V. A. R. Henriques et al. JOURNAL OF MATERIALS SCIENCE
- Nickel-free austenitic stainless steels for medical applications
- (2010) Ke Yang et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Waterjet technology for machining fine features pertaining to micromachining
- (2010) H.-T. Liu Journal of Manufacturing Processes
- On the in vitro and in vivo degradation performance and biological response of new biodegradable Mg–Y–Zn alloys☆
- (2009) Anja C. Hänzi et al. Acta Biomaterialia
- Analysis of ultrasonic-assisted drilling of Ti6Al4V
- (2009) J. Pujana et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of electrical-discharging on formation of nanoporous biocompatible layer on titanium
- (2009) Pei-Wen Peng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical, physical, and chemical characterization of Ti–35Nb–5Zr and Ti–35Nb–10Zr casting alloys
- (2009) Ana Lúcia Roselino Ribeiro et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Critical overview of Nitinol surfaces and their modifications for medical applications
- (2008) S. Shabalovskaya et al. Acta Biomaterialia
- Performance analysis of cryogenically treated coated carbide inserts
- (2008) K. Vadivel et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Metallic biomaterials
- (2008) Mitsuo Niinomi JOURNAL OF ARTIFICIAL ORGANS
- Surface modifications of Al–Zn–Mg alloy using combined EDM with ultrasonic machining and addition of TiC particles into the dielectric
- (2008) Yuan-Feng Chen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator
- (2008) M.P. Jahan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
- Laser beam machining—A review
- (2007) Avanish Kumar Dubey et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of electro-discharging on formation of biocompatible layer on implant surface
- (2007) Sung-Long Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improving tool life using cryogenic cooling
- (2007) Ahsan Ali Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started