A comprehensive review on metallic implant biomaterials and their subtractive manufacturing
出版年份 2022 全文链接
标题
A comprehensive review on metallic implant biomaterials and their subtractive manufacturing
作者
关键词
-
出版物
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume -, Issue -, Pages -
出版商
Springer Science and Business Media LLC
发表日期
2022-02-24
DOI
10.1007/s00170-022-08770-8
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: A review and future prospect
- (2021) Danil Yu. Pimenov et al. Journal of Materials Research and Technology-JMR&T
- The effect of micro and Nano hydroxyapatite Powder on biocompatibility and surface Integrity of Ti6Al4V (ELI) in powder mixed electrical discharge machining
- (2021) Hamidullah Yaşar et al. Surface Topography-Metrology and Properties
- Development of Ti–In alloys by powder metallurgy for application as dental biomaterial
- (2021) L. Romero-Resendiz et al. Journal of Materials Research and Technology-JMR&T
- Effect of Powder Particle Concentration and Tool Electrode Material amid Zinc Powder-Mixed µEDM of Biocompatible Mg Alloy AZ91D
- (2021) Rahul Davis et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- State of the art of tool texturing in machining
- (2021) Alisson R. Machado et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Performance Study of Cryo-Treated End Mill Via Wet, Cryogenic, and Hybrid Lubri-Coolant-Milling Induced Surface Integrity of Biocompatible Mg Alloy AZ91D
- (2021) Rahul Davis et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Investigation of Coatings, Corrosion and Wear Characteristics of Machined Biomaterials through Hydroxyapatite Mixed-EDM Process: A Review
- (2021) Md Al-Amin et al. Materials
- Surface Modification of Medical-Grade Ni55.6Ti44.4 alloy via enhanced machining characteristics of Zn Powder Mixed-μ-EDM
- (2021) Rahul Davis et al. SURFACE & COATINGS TECHNOLOGY
- Fundamental Investigation into Tool Wear and Surface Quality in High-Speed Machining of Ti6Al4V Alloy
- (2021) Adel T. Abbas et al. Materials
- Performance Investigation of Cryo-treated End Mill on the Mechanical and in vitro behavior of Hybrid-lubri-coolant-milled Ti-6Al-4V alloy
- (2021) Rahul Davis et al. Journal of Manufacturing Processes
- Study on the Cutting Performance of Micro Textured Tools on Cutting Ti-6Al-4V Titanium Alloy
- (2020) Kairui Zheng et al. Micromachines
- An investigation of stainless steel 316L parts produced by powder bed fusion submitted to micro-endmilling operations
- (2020) Cleiton Lazaro Fazolo de Assis et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Powder mixed-EDM for potential biomedical applications: A critical review
- (2020) Md Al-Amin et al. MATERIALS AND MANUFACTURING PROCESSES
- Laser-Machining of Microchannels in NiTi-Based Shape-Memory Alloys: Experimental Analysis and Process Optimization
- (2020) Muneer Khan Mohammed et al. Materials
- Micro ED Milling of Ti-6Al-4V with SiC Nano Powder Mixed Dielectrics at Different Ranges of Discharge Energy
- (2020) K. V. Arun Pillai et al. Silicon
- Fabrication of micro-channels on Co–Cr–Mo joints by micro-abrasive jet direct writing
- (2020) Ruslan Melentiev et al. Journal of Manufacturing Processes
- The Effect of Various Surface Treatments of Ti6Al4V on the Growth and Osteogenic Differentiation of Adipose Tissue-Derived Stem Cells
- (2020) Jana Stepanovska et al. Coatings
- Review of ultrasonic vibration-assisted machining in advanced materials
- (2020) Zhichao Yang et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of surface deformation on biocompatibility of biomedical alloys
- (2020) Zhizhong She et al. Materials Science & Engineering C-Materials for Biological Applications
- State of the art in processing of shape memory alloys with electrical discharge machining: A review
- (2020) Ranjit Singh et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Processing Characteristics of Micro Electrical Discharge Machining for Surface Modification of TiNi Shape Memory Alloys Using a TiC Powder Dielectric
- (2020) Ziliang Zhu et al. Micromachines
- Assessment of cryo-MQL environment for machining of Ti-6Al-4V
- (2020) Kishor Kumar Gajrani Journal of Manufacturing Processes
- Nitinol manufacturing and micromachining: A review of processes and their suitability in processing medical-grade nitinol
- (2019) James Wamai Mwangi et al. Journal of Manufacturing Processes
- Chilled Air System and Size Effect in Micro-milling of Nickel−Titanium Shape Memory Alloys
- (2019) Zailani Zainal Abidin et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- In vitro corrosion and hemocompatibility evaluation of electrical discharge treated cobalt–chromium implant
- (2019) Amit Mahajan et al. JOURNAL OF MATERIALS RESEARCH
- Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V
- (2019) Muhammad Jamil et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
- (2019) Lai‐Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Investigation of Surface Morphology and Topography Features on Abrasive Water Jet Milled Surface Pattern of SS 304
- (2019) N. Yuvaraj et al. JOURNAL OF TESTING AND EVALUATION
- Improving surface integrity and corrosion resistance of additive manufactured Ti6Al4V alloy by cryogenic machining
- (2019) R. Bertolini et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of various metal powder mixed dielectric on micro-EDM characteristics of Ti-6Al-4V
- (2019) A. P. Tiwary et al. MATERIALS AND MANUFACTURING PROCESSES
- Laser-Based Hybrid Manufacturing of Endosseous Implants: Optimized Titanium Surfaces for Enhancing Osteogenic Differentiation of Human Mesenchymal Stem Cells
- (2019) Guenaelle Bouet et al. ACS Biomaterials-Science & Engineering
- Hybrid cryogenic MQL for improving tool life in machining of Ti-6Al-4V titanium alloy
- (2019) Alborz Shokrani et al. Journal of Manufacturing Processes
- Potential of electrical discharge treatment to enhance the in vitro cytocompatibility and tribological performance of Co–Cr implant
- (2019) Amit Mahajan et al. JOURNAL OF MATERIALS RESEARCH
- Powder mixed electrical discharge machining for antibacterial coating on titanium implant surfaces
- (2019) Viet D. Bui et al. Journal of Manufacturing Processes
- Investigation of machining characteristics of hard-to-machine Ti-6Al-4V-ELI alloy for biomedical applications
- (2019) Swasthik Pradhan et al. Journal of Materials Research and Technology-JMR&T
- Improving surface integrity aspects of AISI 316L in the context of bioimplant applications
- (2019) Sadaf Zahoor et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Medical devices biomaterials – A review
- (2019) AJ Festas et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- Design and fabrication of Ti–Zr-Hf-Cr-Mo and Ti–Zr-Hf-Co-Cr-Mo high-entropy alloys as metallic biomaterials
- (2019) Takeshi Nagase et al. Materials Science & Engineering C-Materials for Biological Applications
- On the machinability and properties of Ti–6Al–4V biomaterial with n-HAp powder–mixed ED machining
- (2019) Preetkanwal Singh Bains et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Antibacterial coating of Ti-6Al-4V surfaces using silver nano-powder mixed electrical discharge machining
- (2019) Viet D. Bui et al. SURFACE & COATINGS TECHNOLOGY
- Risk factors for refracture after plate removal for midshaft clavicle fracture after bone union
- (2019) Shang-Wen Tsai et al. Journal of Orthopaedic Surgery and Research
- Laser micromachining of titanium alloy in water and ice at different temperatures
- (2019) Taweeporn Wuttisarn et al. OPTICS AND LASER TECHNOLOGY
- Machining-induced surface transformations of magnesium alloys to enhance corrosion resistance in human-like environment
- (2018) Stefania Bruschi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Experimental study on chip deformation of Ti-6Al-4V titanium alloy in cryogenic cutting
- (2018) Wei Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Machining of biocompatible materials: a review
- (2018) Kushendarsyah Saptaji et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure evolution, electrochemical properties and in-vitro properties of Ti-Nb-Zr based biocomposite by hydroxyapatite bioceramic
- (2018) Yuanhuai He et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tuning of the hydrophilicity and hydrophobicity of nitrogen doped carbon dots: A facile approach towards high efficient lubricant nanoadditives
- (2018) Wangji Shang et al. JOURNAL OF MOLECULAR LIQUIDS
- Mechanical properties of magnesium alloys for medical application: A review
- (2018) Junxiu Chen et al. Journal of the Mechanical Behavior of Biomedical Materials
- Enhancing biocompatibility of Co-Cr alloy implants via electrical discharge process
- (2018) Amit Mahajan et al. MATERIALS TECHNOLOGY
- Post-Processing of NiTi Alloys: Issues and Challenges
- (2018) N. Sharma et al. POWDER METALLURGY AND METAL CERAMICS
- Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review
- (2018) Chen Liu et al. SCANNING
- Particle migration and surface modification on Ti6Al4V in SiC powder mixed electrical discharge machining
- (2018) Tahsin T. Öpöz et al. Journal of Manufacturing Processes
- Active agents, biomaterials, and technologies to improve biolubrication and strengthen soft tissues
- (2018) Benjamin G. Cooper et al. BIOMATERIALS
- Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants
- (2018) Laila Damiati et al. Journal of Tissue Engineering
- Machinability of titanium alloy through electric discharge machining
- (2018) Naveed Ahmed et al. MATERIALS AND MANUFACTURING PROCESSES
- Effect of the AWJM Method on the Machined Surface Layer of AZ91D Magnesium Alloy and Simulation of Roughness Parameters Using Neural Networks
- (2018) Ireneusz Zagórski et al. Materials
- Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy
- (2018) Vinothkumar Sivalingam et al. Journal of Manufacturing Processes
- Surface modification of Ti-alloy by micro-electrical discharge process using tungsten disulphide powder suspension
- (2018) Shalini Mohanty et al. Journal of Manufacturing Processes
- Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions
- (2017) Mohd Danish et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Bio-Functional Design, Application and Trends in Metallic Biomaterials
- (2017) Ke Yang et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- A review on ionic liquids as sustainable lubricants in manufacturing and engineering: Recent research, performance, and applications
- (2017) S.A.S. Amiril et al. JOURNAL OF CLEANER PRODUCTION
- Preparation of Phytic Acid/Silane Hybrid Coating on Magnesium Alloy and Its Corrosion Resistance in Simulated Body Fluid
- (2017) Fengwu Wang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Surface Characteristics of Machined NiTi Shape Memory Alloy: The Effects of Cryogenic Cooling and Preheating Conditions
- (2017) Y. Kaynak et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- High speed cryogenic finish machining of Ti - 6Al4V with polycrystalline diamond tools
- (2017) Julius Schoop et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Machining of NiTi-shape memory alloys-A review
- (2017) C. Velmurugan et al. MACHINING SCIENCE AND TECHNOLOGY
- Performance evaluation of Al2O3 nano powder mixed dielectric for electric discharge machining of Inconel 825
- (2017) Amit Kumar et al. MATERIALS AND MANUFACTURING PROCESSES
- Surface modification of metallic biomaterials for enhanced functionality: a review
- (2017) A. Mahajan et al. MATERIALS TECHNOLOGY
- Curve micromachining on the edges of nitinol biliary stent by ultrashort pulses laser
- (2017) Chia-Hung Hung et al. OPTICS AND LASER TECHNOLOGY
- A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants
- (2017) Abdul’Azeez Abdu Aliyu et al. Advances in Materials Science and Engineering
- Investigation of carbon nanotube added dielectric on the surface characteristics and machining performance of Ti–6Al–4V alloy in EDM process
- (2017) Mohammadreza Shabgard et al. Journal of Manufacturing Processes
- Bulk Metallic Glasses for Implantable Medical Devices and Surgical Tools
- (2016) Philip Meagher et al. ADVANCED MATERIALS
- Multifunctional ceramic-metal biocomposites with Zinc containing antimicrobial glass coatings
- (2016) Leticia Esteban-Tejeda et al. CERAMICS INTERNATIONAL
- Enhancing the corrosion resistance of biodegradable Mg-based alloy by machining-induced surface integrity: influence of machining parameters on surface roughness and hardness
- (2016) M. S. Uddin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization of machining parameters and cutting fluids during nano-fluid based minimum quantity lubrication turning of titanium alloy by using evolutionary techniques
- (2016) Munish Kumar Gupta et al. JOURNAL OF CLEANER PRODUCTION
- Recent advances in turning with textured cutting tools: A review
- (2016) Varun Sharma et al. JOURNAL OF CLEANER PRODUCTION
- A Discharge Separation Model for Powder Mixed Electrical Discharge Machining
- (2016) Bülent Ekmekci et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening
- (2016) M. Lieblich et al. Journal of the Mechanical Behavior of Biomedical Materials
- Comparative investigation on using cryogenic machining in CNC milling ofTi-6Al-4Vtitanium alloy
- (2016) Alborz Shokrani et al. MACHINING SCIENCE AND TECHNOLOGY
- Electrical discharge grinding of polycrystalline diamond – Effect of wheel rotation
- (2016) M. Zulafif Rahim et al. MACHINING SCIENCE AND TECHNOLOGY
- Surface characteristics of Ti-6Al-4V by SiC abrasive-mixed EDM with magnetic stirring
- (2016) L. Li et al. MATERIALS AND MANUFACTURING PROCESSES
- Experimental investigation on performance of additive mixed dielectric during micro-electric discharge drilling on 316L stainless steel
- (2016) J. Cyril et al. MATERIALS AND MANUFACTURING PROCESSES
- Surfactant and graphite powder–assisted electrical discharge machining of titanium alloy
- (2016) Murahari Kolli et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- State of the art in powder-mixed electric discharge machining: A review
- (2016) Gangadharudu Talla et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Energy conscious cryogenic machining of Ti-6Al-4V titanium alloy
- (2016) Alborz Shokrani et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Developments in cutting tool technology in improving machinability of Ti6Al4V alloy: A review
- (2016) Abhineet Saini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Multi-process parameter optimization in face milling of Ti6Al4V alloy using response surface methodology
- (2016) Abhineet Saini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Dual-topography electrical discharge machining of titanium to improve biocompatibility
- (2016) Bryan E.J. Lee et al. SURFACE & COATINGS TECHNOLOGY
- Titanium perovskite (CaTiO 3 ) formation in Ti6Al4V alloy using the electrical discharge machining process for biomedical applications
- (2016) W.F. Sales et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Tool Rotational and Al2O3 Powder in Electro Discharge Machining Characteristics of NiTi-60 Shape Memory Alloy
- (2016) Saeed Daneshmand et al. Silicon
- Brief Overview on Nitinol as Biomaterial
- (2016) Abdul Wadood Advances in Materials Science and Engineering
- Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti–6Al–4V titanium alloy
- (2016) Alborz Shokrani et al. Journal of Manufacturing Processes
- Effects of cutting parameters on dry machining Ti-6Al-4V alloy with ultra-hard tools
- (2015) F. J. Sun et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Security and privacy issues in implantable medical devices: A comprehensive survey
- (2015) Carmen Camara et al. JOURNAL OF BIOMEDICAL INFORMATICS
- Processing and Characterization of Novel Biomimetic Nanoporous Bioceramic Surface on β-Ti Implant by Powder Mixed Electric Discharge Machining
- (2015) Chander Prakash et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel
- (2015) Adem Çiçek et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Surface modification of TiNi-based shape memory alloys by dry electrical discharge machining
- (2015) Tyau-Song Huang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions
- (2015) Y. Kaynak et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti–6Al–4V alloy
- (2015) Shoujin Sun et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Biomaterials for dental implants: current and future trends
- (2015) Donatella Duraccio et al. JOURNAL OF MATERIALS SCIENCE
- Machining parameters effect in dry turning of AISI 316L stainless steel using coated carbide tools
- (2015) Rusdi Nur et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING
- Wear behaviour of PVD coated and cryogenically treated tools for Ti-6Al-4V turning
- (2015) Matteo Strano et al. International Journal of Material Forming
- Theoretical model for cutting force in rotary ultrasonic milling of dental zirconia ceramics
- (2014) Xingzhi Xiao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
- (2014) André Luiz Jardini et al. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY
- Cutting Speed Dependent Microstructure and Transformation Behavior of NiTi Alloy in Dry and Cryogenic Machining
- (2014) Y. Kaynak et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Machining and Phase Transformation Response of Room-Temperature Austenitic NiTi Shape Memory Alloy
- (2014) Yusuf Kaynak JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining
- (2014) Yusuf Kaynak et al. MACHINING SCIENCE AND TECHNOLOGY
- Experimental Study on Cutting Forces and Surface Integrity in High-Speed Side Milling ofTi-6Al-4VTitanium Alloy
- (2014) Fuzeng Wang et al. MACHINING SCIENCE AND TECHNOLOGY
- Cutting Force and Surface Roughness Characterization in Cryogenic High-Speed End Milling of Ti–6Al-4V ELI
- (2014) H. Safari et al. MATERIALS AND MANUFACTURING PROCESSES
- Cutting force, tool life and surface integrity in milling of titanium alloy Ti-6Al-4V with coated carbide tools
- (2014) Wilma Polini et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Analysis of ignition risk in intermittent turning of UNS M11917 magnesium alloy at low cutting speeds based on the chip morphology
- (2014) Diego Carou et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Machinability comparison of AISI 4340 and Ti-6Al-4V under cryogenic and hybrid cooling environments: A knowledge engineering approach
- (2014) Khalid A Al-Ghamdi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- A biocompatible ionic liquid as an antiwear additive for biodegradable lubricants
- (2014) Bhawna Khemchandani et al. TRIBOLOGY INTERNATIONAL
- Biomanufacturing
- (2013) Mamoru Mitsuishi et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Machinability and surface integrity of Nitinol shape memory alloy
- (2013) Yuebin Guo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- On geometrical accuracy and integrity of surfaces in multi-mode abrasive waterjet machining of NiTi shape memory alloys
- (2013) Ming Chu Kong et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Effect of Electrical Discharging on Formation of Nanoporous Biocompatible Layer on Ti-6Al-4V Alloys
- (2013) Tzu-Sen Yang et al. Implant Dentistry
- Compound machining of titanium alloy by super high speed EDM milling and arc machining
- (2013) Fei Wang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy
- (2013) Mohammed B Ndaliman et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- The effects of machining on the microstructure and transformation behavior of NiTi Alloy
- (2013) Y. Kaynak et al. SCRIPTA MATERIALIA
- Tribological behaviour of Ti6Al4V and Inconel718 under dry and cryogenic conditions—Application to the context of machining with carbide tools
- (2013) C. Courbon et al. TRIBOLOGY INTERNATIONAL
- Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions
- (2013) Zhiqiang Liu et al. WEAR
- Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining
- (2013) Y. Kaynak et al. WEAR
- Biomedical production of implants by additive electro-chemical and physical processes
- (2012) Paulo Bartolo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Enhanced osteoblast response to electrical discharge machining surface
- (2012) Fukunaga OTSUKA et al. DENTAL MATERIALS JOURNAL
- An experimental study of process variables in turning operations of Ti–6Al–4V and Cr–Co spherical prostheses
- (2012) J. V. Abellán-Nebot et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improving surface hardness of austenitic stainless steel using waterjet peening process
- (2012) Azmir Azhari et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
- (2012) A. Shokrani et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of cryogenic burnishing on surface integrity modifications ofCo-Cr-Mobiomedical alloy
- (2012) Shu Yang et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation
- (2011) Rolando A. Gittens et al. BIOMATERIALS
- Performance evaluation of CBN, coated carbide, cryogenically treated uncoated/coated carbide inserts in finish-turning of hardened steel
- (2011) Manu Dogra et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components
- (2011) Z. Pu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Surface treatment by electric discharge machining of Ti–6Al–4V alloy for potential application in orthopaedics
- (2011) Petr Harcuba et al. Journal of the Mechanical Behavior of Biomedical Materials
- Cryogenic Turning of AISI 304 Stainless Steel with Modified Tungsten Carbide Tool Inserts
- (2011) M. Dhananchezian et al. MATERIALS AND MANUFACTURING PROCESSES
- Roughening of metallic biomaterials by abrasiveless waterjet peening: Characterization and viability
- (2011) S. Barriuso et al. WEAR
- Shape-memory NiTi with two-dimensional networks of micro-channels
- (2010) Anselm J. Neurohr et al. Acta Biomaterialia
- Bone bonding bioactivity of Ti metal and Ti–Zr–Nb–Ta alloys with Ca ions incorporated on their surfaces by simple chemical and heat treatments
- (2010) A. Fukuda et al. Acta Biomaterialia
- The effect of Electro Discharge Machining (EDM) on the corrosion resistance of dental alloys
- (2010) Argyro Ntasi et al. DENTAL MATERIALS
- Achieving Small Structures in Thin NiTi Sheets for Medical Applications with Water Jet and Micro Machining: A Comparison
- (2010) M. Frotscher et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Pulsed Nd:YAG laser cutting of NiTi shape memory alloys—Influence of process parameters
- (2010) Ronny Pfeifer et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Challenges in using waterjet machining of NiTi shape memory alloys: An analysis of controlled-depth milling
- (2010) M.C. Kong et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Production of Ti–13Nb–13Zr alloy for surgical implants by powder metallurgy
- (2010) V. A. R. Henriques et al. JOURNAL OF MATERIALS SCIENCE
- Nickel-free austenitic stainless steels for medical applications
- (2010) Ke Yang et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Waterjet technology for machining fine features pertaining to micromachining
- (2010) H.-T. Liu Journal of Manufacturing Processes
- On the in vitro and in vivo degradation performance and biological response of new biodegradable Mg–Y–Zn alloys☆
- (2009) Anja C. Hänzi et al. Acta Biomaterialia
- Analysis of ultrasonic-assisted drilling of Ti6Al4V
- (2009) J. Pujana et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of electrical-discharging on formation of nanoporous biocompatible layer on titanium
- (2009) Pei-Wen Peng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Mechanical, physical, and chemical characterization of Ti–35Nb–5Zr and Ti–35Nb–10Zr casting alloys
- (2009) Ana Lúcia Roselino Ribeiro et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Critical overview of Nitinol surfaces and their modifications for medical applications
- (2008) S. Shabalovskaya et al. Acta Biomaterialia
- Performance analysis of cryogenically treated coated carbide inserts
- (2008) K. Vadivel et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Metallic biomaterials
- (2008) Mitsuo Niinomi JOURNAL OF ARTIFICIAL ORGANS
- Surface modifications of Al–Zn–Mg alloy using combined EDM with ultrasonic machining and addition of TiC particles into the dielectric
- (2008) Yuan-Feng Chen et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator
- (2008) M.P. Jahan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
- (2008) M. Geetha et al. PROGRESS IN MATERIALS SCIENCE
- Laser beam machining—A review
- (2007) Avanish Kumar Dubey et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effect of electro-discharging on formation of biocompatible layer on implant surface
- (2007) Sung-Long Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improving tool life using cryogenic cooling
- (2007) Ahsan Ali Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search