Bio-Functional Design, Application and Trends in Metallic Biomaterials
Published 2017 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Bio-Functional Design, Application and Trends in Metallic Biomaterials
Authors
Keywords
-
Journal
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
Volume 19, Issue 1, Pages 24
Publisher
MDPI AG
Online
2017-12-22
DOI
10.3390/ijms19010024
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Surface Modification of Titanium with BMP-2/GDF-5 by a Heparin Linker and Its Efficacy as a Dental Implant
- (2017) Dae Yang et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Behavior of Gingival Fibroblasts on Titanium Implant Surfaces in Combination with either Injectable-PRF or PRP
- (2017) Xuzhu Wang et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Ratcheting behavior of ZEK100 magnesium alloy with various loading conditions and different immersing time
- (2017) Hong Gao et al. JOURNAL OF MATERIALS RESEARCH
- Review of “Biomaterials for Musculoskeletal Regeneration: Concepts, by Bikramjit Basu, Indian Institute of Metals Series, Springer Nature (2016)” and “Biomaterials for Musculoskeletal Regeneration: Applications, by Bikramjit Basu and Sourabh Ghosh, Indian Institute of Metals Series, Springer Nature (2016)”
- (2017) Yusuf M. Khan et al. JOURNAL OF MATERIALS SCIENCE
- Dual-surface modification of titanium alloy with anodizing treatment and bioceramic particles for enhancing prosthetic devices
- (2017) M. V. Gonzalez Galdos et al. JOURNAL OF MATERIALS SCIENCE
- Effect of severe plastic deformation on the biocompatibility and corrosion rate of pure magnesium
- (2017) Cláudio L. P. Silva et al. JOURNAL OF MATERIALS SCIENCE
- Bivalent cationic ions doped bioactive glasses: the influence of magnesium, zinc, strontium and copper on the physical and biological properties
- (2017) Ilaria Cacciotti JOURNAL OF MATERIALS SCIENCE
- Bioactive glass-containing cranial implants: an overview
- (2017) Pekka K. Vallittu JOURNAL OF MATERIALS SCIENCE
- The utility of 3D printing for surgical planning and patient-specific implant design for complex spinal pathologies: case report
- (2017) Ralph J. Mobbs et al. JOURNAL OF NEUROSURGERY-SPINE
- Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications
- (2017) I.V. Okulov et al. Journal of the Mechanical Behavior of Biomedical Materials
- Bionic mechanical design of titanium bone tissue implants and 3D printing manufacture
- (2017) Xuan Pei et al. MATERIALS LETTERS
- Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes
- (2017) Hooyar Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A technique for evaluating bone ingrowth into 3D printed, porous Ti6Al4V implants accurately using X-ray micro-computed tomography and histomorphometry
- (2017) Anders Palmquist et al. MICRON
- Laser beam melting 3D printing of Ti6Al4V based porous structured dental implants: fabrication, biocompatibility analysis and photoelastic study
- (2017) Fei Yang et al. Scientific Reports
- Biomechanical Property of a Newly Designed Assembly Locking Compression Plate: Three-Dimensional Finite Element Analysis
- (2017) Jiang-Jun Zhou et al. Journal of Healthcare Engineering
- Quantitative Analysis of Apatite Formation on Titanium and Zirconia in a Simulated Body Fluid Solution Using the Quartz Crystal Microbalance Method
- (2017) Eiji Yoshida et al. Advances in Materials Science and Engineering
- A review of 4D printing
- (2017) Farhang Momeni et al. MATERIALS & DESIGN
- Design and characterizations of novel biodegradable Zn-Cu-Mg alloys for potential biodegradable implants
- (2017) Zibo Tang et al. MATERIALS & DESIGN
- Zinc subjected to plastic deformation by complex loading and conventional extrusion: Comparison of the microstructure and mechanical properties
- (2017) K. Pieła et al. MATERIALS & DESIGN
- Biomechanical evaluation of a dynamic fusion cage design for cervical spine: A finite element study
- (2017) Jung-Tung Liu et al. Advances in Mechanical Engineering
- Fatigue behaviors of HP-Mg, Mg–Ca and Mg–Zn–Ca biodegradable metals in air and simulated body fluid
- (2016) Dong Bian et al. Acta Biomaterialia
- 3D printed Ti6Al4V implant surface promotes bone maturation and retains a higher density of less aged osteocytes at the bone-implant interface
- (2016) Furqan A. Shah et al. Acta Biomaterialia
- Recent advances in bulk metallic glasses for biomedical applications
- (2016) H.F. Li et al. Acta Biomaterialia
- Biodegradable/biocompatible coated metal implants for orthopedic applications
- (2016) Mohamed M. Saleh et al. BIO-MEDICAL MATERIALS AND ENGINEERING
- Mathematical modelling of the degradation behaviour of biodegradable metals
- (2016) P. Bajger et al. Biomechanics and Modeling in Mechanobiology
- Comparative corrosion behavior of Zn with Fe and Mg in the course of immersion degradation in phosphate buffered saline
- (2016) Yingqi Chen et al. CORROSION SCIENCE
- Recent advances in research on magnesium alloys and magnesium–calcium phosphate composites as biodegradable implant materials
- (2016) Katarzyna Kuśnierczyk et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- In vitro biocompatibility of anodized titanium with deposited silver nanodendrites
- (2016) Mariusz Kaczmarek et al. JOURNAL OF MATERIALS SCIENCE
- In Vitro Evaluation of the Feasibility of Commercial Zn Alloys as Biodegradable Metals
- (2016) C. Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Bio-Adaption between Magnesium Alloy Stent and the Blood Vessel: A Review
- (2016) Jun Ma et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation
- (2016) E. Mostaed et al. Journal of the Mechanical Behavior of Biomedical Materials
- Strengthening of Mg based alloy through grain refinement for orthopaedic application
- (2016) Soumyaranjan Nayak et al. Journal of the Mechanical Behavior of Biomedical Materials
- A novel in situ deposition of hydroxyapatite nanoplates using anodization/hydrothermal process onto magnesium alloy surface towards third generation biomaterials
- (2016) Hamouda M. Mousa et al. MATERIALS LETTERS
- Microstructure, mechanical properties, in vitro degradation behavior and hemocompatibility of novel Zn–Mg–Sr alloys as biodegradable metals
- (2016) Xiwei Liu et al. MATERIALS LETTERS
- In vitro responses of bone-forming MC3T3-E1 pre-osteoblasts to biodegradable Mg-based bulk metallic glasses
- (2016) Haifei Li et al. Materials Science & Engineering C-Materials for Biological Applications
- In vitro and in vivo degradation and mechanical properties of ZEK100 magnesium alloy coated with alginate, chitosan and mechano-growth factor
- (2016) Hong Gao et al. Materials Science & Engineering C-Materials for Biological Applications
- Novel bioactive Fe-based metallic glasses with excellent apatite-forming ability
- (2016) Chunling Qin et al. Materials Science & Engineering C-Materials for Biological Applications
- Numerical simulation on the effects of drug-eluting stents with different bending angles on hemodynamics and drug distribution
- (2016) Yu Chen et al. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
- Design and biomechanical study of a novel adjustable hemipelvic prosthesis
- (2016) Dongxu Liu et al. MEDICAL ENGINEERING & PHYSICS
- Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn-Alloys
- (2016) Patrick K. Bowen et al. Advanced Healthcare Materials
- Biomechanical Design of Elastic Protein Biomaterials: A Balance of Protein Structure and Conformational Disorder
- (2016) Lisa D. Muiznieks et al. ACS Biomaterials-Science & Engineering
- Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application
- (2016) Xiwei Liu et al. MATERIALS & DESIGN
- Evaluation of mechanical and wear properties of Ti xNb 7Fe alloys designed for biomedical applications
- (2016) S. Ehtemam-Haghighi et al. MATERIALS & DESIGN
- Biomechanical Design of Elastic Protein Biomaterials: A Balance of Protein Structure and Conformational Disorder
- (2016) Lisa D. Muiznieks et al. ACS Biomaterials Science & Engineering
- A Practical Anodic and Cathodic Curve Intersection Model to Understand Multiple Corrosion Potentials of Fe-Based Glassy Alloys in OH- Contained Solutions
- (2016) Y. J. Li et al. PLoS One
- 3D Printing Surgical Implants at the clinic: A Experimental Study on Anterior Cruciate Ligament Reconstruction
- (2016) An Liu et al. Scientific Reports
- Mechanical properties, in vitro corrosion and biocompatibility of newly developed biodegradable Mg-Zr-Sr-Ho alloys for biomedical applications
- (2016) Yunfei Ding et al. Scientific Reports
- Cytotoxicity of corrosion products of degradable Fe-based stents: Relevance of pH and insoluble products
- (2015) Natalia S. Fagali et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Microwave assisted-in situ synthesis of porous titanium/calcium phosphate composites and their in vitro apatite-forming capability
- (2015) Man-Tik Choy et al. COMPOSITES PART B-ENGINEERING
- Magnetic resonance imaging of an equine fracture model containing stainless steel metal implants
- (2015) S. L. Pownder et al. EQUINE VETERINARY JOURNAL
- SLM Produced Porous Titanium Implant Improvements for Enhanced Vascularization and Osteoblast Seeding
- (2015) Julia Matena et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Optimal Scanning Protocols for Dual-Energy CT Angiography in Peripheral Arterial Stents: An in Vitro Phantom Study
- (2015) Abdulrahman Almutairi et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Degradation of zinc in saline solutions, plasma, and whole blood
- (2015) Karin Törne et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Biological evaluation of ultra-fine titanium with improved mechanical strength for dental implant engineering
- (2015) Lucie Ostrovska et al. JOURNAL OF MATERIALS SCIENCE
- Characterization and biocompatibility of a calcium-containing AZ31B alloy as a biodegradable material
- (2015) Yu Kyoung Kim et al. JOURNAL OF MATERIALS SCIENCE
- A perspective on molybdenum biocompatibility and antimicrobial activity for applications in implants
- (2015) Andreza M. Ribeiro et al. JOURNAL OF MATERIALS SCIENCE
- Comparative mechanical and corrosion studies on magnesium, zinc and iron alloys as biodegradable metals
- (2015) Dalibor Vojtěch et al. Materiali in Tehnologije
- Biodegradable Mg–Zn–Ca–Sr bulk metallic glasses with enhanced corrosion performance for biomedical applications
- (2015) Haifei Li et al. MATERIALS & DESIGN
- Development of Fe-based bulk metallic glasses as potential biomaterials
- (2015) Shidan Li et al. Materials Science & Engineering C-Materials for Biological Applications
- Atomic structure of biodegradable Mg-based bulk metallic glass
- (2015) J. K. Christie PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- New horizon for high performance Mg-based biomaterial with uniform degradation behavior: Formation of stacking faults
- (2015) Jinghuai Zhang et al. Scientific Reports
- Recent Advances in Biodegradable Metals for Medical Sutures: A Critical Review
- (2015) Jan-Marten Seitz et al. Advanced Healthcare Materials
- Role of partially amorphous structure and alloying elements on the corrosion behavior of Mg–Zn–Ca bulk metallic glass for biomedical applications
- (2015) M. Ramya et al. MATERIALS & DESIGN
- Design and characterizations of novel biodegradable ternary Zn-based alloys with IIA nutrient alloying elements Mg, Ca and Sr
- (2015) Huafang Li et al. MATERIALS & DESIGN
- Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn–3Mg alloy as potential biodegradable implant material
- (2015) M.S. Dambatta et al. MATERIALS & DESIGN
- The Effect of Treatment Temperature on Corrosion Resistance and Hydrophilicity of an Ionic Liquid Coating for Mg-Based Stents
- (2014) Yafei Zhang et al. ACS Applied Materials & Interfaces
- Recent advances on the development of magnesium alloys for biodegradable implants
- (2014) Yongjun Chen et al. Acta Biomaterialia
- Biodegradable Fe-based alloys for use in osteosynthesis: Outcome of an in vivo study after 52weeks
- (2014) Tanja Kraus et al. Acta Biomaterialia
- Synthesis and characterization of CaP/Col composite scaffolds for load-bearing bone tissue engineering
- (2014) C.C. Zhou et al. COMPOSITES PART B-ENGINEERING
- Evaluation of Osseointegration of Titanium Alloyed Implants Modified by Plasma Polymerization
- (2014) Carolin Gabler et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Biomechanical evaluation of a new design titanium miniplate for the treatment of mandibular angle fractures
- (2014) B.T. Suer et al. INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
- Effects of Mg on microstructure and corrosion properties of Zn–Mg alloy
- (2014) Caizhen Yao et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Biodegradable metals
- (2014) Y.F. Zheng et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Biomechanical analysis and design of a dynamic spinal fixator using topology optimization: a finite element analysis
- (2014) Hung-Ming Lin et al. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
- Biomechanical comparison of mono-segment transpedicular fixation with short-segment fixation for treatment of thoracolumbar fractures: A finite element analysis
- (2014) Guijun Xu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Progress of biodegradable metals
- (2014) Huafang Li et al. Progress in Natural Science-Materials International
- Biomechanical Considerations in the Design of High-Flexion Total Knee Replacements
- (2014) Cheng-Kung Cheng et al. TheScientificWorldJOURNAL
- Biological Activation of Inert Ceramics: Recent Advances Using Tailored Self-Assembled Monolayers on Implant Ceramic Surfaces
- (2014) Frederik Böke et al. Materials
- Biocompatibility of rapidly solidified magnesium alloy RS66 as a temporary biodegradable metal
- (2013) Elmar Willbold et al. Acta Biomaterialia
- Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
- (2013) Patrick K. Bowen et al. ADVANCED MATERIALS
- The biomechanical effects of a new design of lateral wedge insole on the knee and ankle during walking
- (2013) Richard K. Jones et al. HUMAN MOVEMENT SCIENCE
- Dual Delivery of BMP-2 and bFGF from a New Nano-Composite Scaffold, Loaded with Vascular Stents for Large-Size Mandibular Defect Regeneration
- (2013) Jiansheng Su et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Nano-hydroxyapatite reinforced AZ31 magnesium alloy by friction stir processing: a solid state processing for biodegradable metal matrix composites
- (2013) B. Ratna Sunil et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Unknown
- (2013) Yu Chen Journal of Medical and Biological Engineering
- Design considerations for studies of the biomechanical environment of the femoropopliteal arteries
- (2013) Farzana Ansari et al. JOURNAL OF VASCULAR SURGERY
- In vitro and in vivo studies on a Mg–Sr binary alloy system developed as a new kind of biodegradable metal
- (2012) X.N. Gu et al. Acta Biomaterialia
- Preparation and Characterization of New Nano-Composite Scaffolds Loaded With Vascular Stents
- (2012) Hongzhen Xu et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- In vitro biomechanical evaluation of sagittal split osteotomy fixation with a specifically designed miniplate
- (2012) V.A. Pereira Filho et al. INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
- Synthesis and characterization of Mg-Ca-Sr alloys for biodegradable orthopedic implant applications
- (2012) Ida S. Berglund et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Apatite-forming ability of titanium in terms of pH of the exposed solution
- (2012) D. K. Pattanayak et al. Journal of the Royal Society Interface
- On the cytocompatibility of biodegradable Fe-based alloys
- (2012) Michael Schinhammer et al. Materials Science & Engineering C-Materials for Biological Applications
- Evaluation of the biocompatibility of two magnesium alloys as degradable implant materials in comparison to titanium as non‐resorbable material in the rabbit
- (2012) Carolin Hampp et al. Materials Science & Engineering C-Materials for Biological Applications
- Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation
- (2011) D. Vojtěch et al. Acta Biomaterialia
- Biomechanical evaluation of macro and micro designed screw-type implants: an insertion torque and removal torque study in rabbits
- (2011) Ramesh Chowdhary et al. CLINICAL ORAL IMPLANTS RESEARCH
- Biodegradable Metals for Cardiovascular Stent Application: Interests and New Opportunities
- (2011) Maryam Moravej et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Development of CaZn based glassy alloys as potential biodegradable bone graft substitute
- (2011) W. Jiao et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- Corrosion Behaviors of Amorphous and Nanocrystalline Fe-Based Alloys in NaCl Solution
- (2010) Xiang Li et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- Apatite formation on anodized Ti-6Al-4V alloy in simulated body fluid
- (2010) Xinyu Cui et al. METALS AND MATERIALS INTERNATIONAL
- Fe–Mn alloys for metallic biodegradable stents: Degradation and cell viability studies☆
- (2009) Hendra Hermawan et al. Acta Biomaterialia
- On the in vitro and in vivo degradation performance and biological response of new biodegradable Mg–Y–Zn alloys☆
- (2009) Anja C. Hänzi et al. Acta Biomaterialia
- Magnesium alloys as implant materials – Principles of property design for Mg–RE alloys☆
- (2009) N. Hort et al. Acta Biomaterialia
- Design strategy for biodegradable Fe-based alloys for medical applications☆
- (2009) Michael Schinhammer et al. Acta Biomaterialia
- Degradable metallic biomaterials: Design and development of Fe-Mn alloys for stents
- (2009) Hendra Hermawan et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Fabrication of biomimetic apatite coating on porous titanium and their osteointegration in femurs of dogs
- (2009) C.Y. Zhao et al. Materials Science & Engineering C-Materials for Biological Applications
- Study of nanobiomaterial hydroxyapatite in simulated body fluid: Formation and growth of apatite
- (2009) Pradnya N. Chavan et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Weak effect of metal type and ica genes on staphylococcal infection of titanium and stainless steel implants
- (2008) D. Hudetz et al. CLINICAL MICROBIOLOGY AND INFECTION
- Numerical simulation of drug eluting coronary stents: Mechanics, fluid dynamics and drug release
- (2008) P. Zunino et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants
- (2007) P HABIBOVIC et al. BIOMATERIALS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started